Evaluation of microsatellite markers in cultivars of sweet orange (Citrus sinensis [L.] Osbeck)

Sweet orange is considered a very important species in the citrus world market and presents wide morphological variability. However, its characterization at the molecular level by random amplified polymorphic DNA (RAPD) and isozyme markers is not appropriate. Microsatellite or simple sequence repeats (SSRs) have been suggested as ideal for studies in cultures of vegetative propagation and as value markers for mapping in several species. However, information on microsatellite polymorphism in citrus species is scarce. In this work, microsatellite markers (AG-repeats) were developed from an enrichment library of genomic DNA of sweet orange cv. Pera (Citrus sinensis [L.] Osbeck), and 31 cultivars of sweet orange were evaluated. Evaluation of 18 microsatellite primers did not permit differentiation of the varieties studied. New microsatellite primers are being evaluated with the aim of detecting polymorphisms among the cultivars and closely related species to be used in genetic mapping programs.

Nutrients foliar content for high productivity cultivars of guava in Brazil

Commonly grown in tropical and sub-tropical regions, guava (Psidium guajava L.) is an important fruit crop of Brazil. It is cultivated on a large scale in São Paulo state, and covers about 6,500 hectares. As a result of the guava selection program developed at FCAV/UNESP, two new cultivars were created: 'Rica' and 'Paluma' with a high productivity, and also with higher nutritional requirement. Leaves analysis has become a powerful tool in mineral-nutrition research with fruit crops, not only to determine response to different nutrients, but also for diagnostic techniques in making fertilizer recommendations and assessing deficiency symptoms. Nutrient composition of the leaves varies depending on the leaf maturity, tree age, variety and nutrient supply. For the interpretation of analytical values, selection of the index tissue is important. The results of experiments conducted in the field during 1989-2000 were studied. The nutritional status was evaluated by annual leaf sampling, carried out at full bloom. Recent fully developed leaves, corresponding to the third pair (with the petiole) were collected, starting at the end of the branch, all around the tree, at a height of 1.5 m from the soil, with a total of 30 leaf pairs per sample. The yield was evaluated by weighing all the fruits in the useful area of each lot. Foliar chemical analysis showed excellent correlation with the fruit production. Through the results it was verified that the maximum yield was associated to the following levels: N = 22-26; P = 1.5-1.9; K = 17-20; Ca = 11-15; Mg = 2.5-3.5; S = 3.0-3.5 g kg -1; B = 20-25; Cu = 10-40; Fe = 50-150; Mn = 180-250; Zn = 25-35 mg kg-1 DW in the leaves of the 'Rica' guava and to N = 20-23; P = 1.4-1.8; K = 14-17; Ca = 7-11; Mg = 3.4-4.0; S = 2.5-3.5 g kg-1; B = 20-25; Cu = 20-40; Fe = 60-90; Mn = 40-80; Zn = 25-35 mg kg-1 DW in the leaves of the 'Paluma' guava.

Effect of storage of cuttings on the rooting of different cultivars of cut chrysanthemums (Dendranthema grandiflora Tzvelev) for two different seasons

Chrysanthemums are commercially propagated through cuttings. Pre-rooting storage of cuttings in the dark is a common practice among growers and companies that work and trade with chrysanthemum cuttings. Therefore, the maximum storage period for cuttings and differences in tolerance among cultivars has been investigated. Adventitious roots of cuttings can originate in almost any tissue, including the epidermis, stem cortex and pericycle, ray parenchyma, immature xylem and phloem cells, and pith. The aims of this work were to determine the effect of time of cold storage of cuttings (0, 1, 2, 3, 4, 5 and 6 weeks) on the rooting of four cut chrysanthemum cultivars (Super White, Sheena, Dark Orange Reagan and Town Talk) for two seasons of the year (summer and winter), and also to determine the origin of root formation in chrysanthemum cuttings. The study was carried out as a randomized complete block design with 5 replications for each storage treatment. Each plot was comprised of three cuttings that were examined 14 days after the cutting procedure. During the winter, the roots were studied by scanning electron microscopy (SEM) at the Electron Microscope Laboratory. The following conclusions were made: in winter, cold storage affected the rooting of cuttings, mainly after two weeks of storage for all cultivars. The rooting percentage was lower in the winter and the cuttings could be preserved for a shorter period. The source and growth of roots in chrysanthemum cuttings was found to be endogenous. After three days, callus formed in the pericycle and the first emergence of adventitious roots occurred by the fourth day of rooting. During the summer, cold storage could be up to 4 weeks without any problems.

Cultivation systems and planting seasons effects on the vegetative growing of net melon cultivars

Growth effects of cultivation on soil, sand and commercial substrate, on summer and winter time, of 'Bonus #2', 'Don Carlo's and 'Hy Mark' were assessed. The experiments were conducted in a greenhouse of FCAV-UNESP, in Jaboticabal- SP, Brazil, 21° 15' 22 S, 48° 18'58 W, and an altitude of 595 m, comprising the period from November '99 to April 2000 (Summer), and from July to November 2000 (Winter). On soil cultivation, chemical nutrients were used, and the plants received drip irrigation. On sand, fertigation with recirculation of the nutrient solution were used, and slabs and fertigation with non circulating nutrient solution was used with commercial substrate. 'Bonus #2', grown on sand and in the summer season had improved plant height, internodes length, stem diameter, leaf area and dry matter of shoots and roots. 'Hy Mark', when cultivated on commercial substrate had lower growth. During winter season, the growth was slower.

Net melon cultivars productivity under different cultivation systems, during summer and winter

In order to access the effects of cultivation in soil, sand or a commercial substrate on the productivity of Bonus #2 cultivars, 'Don Carlos' and 'Hy Mark', two experiments were conducted in the greenhouse at FCAV-UNESP, Jaboticabal- SP, Brazil, 21° 15' 22 S, 48° 18'58 W, and altitude of 595 m, from November 1999 to April 2000 (summer), and from July to November 2000 (Winter). For cultivation in soil, chemical nutrients were added, and plants were irrigated with drip irrigation. Fertigation with recirculation of the nutrient solution was used on sand; slabs were used on commercial substrate with the fertigation with non circulating nutrient solution. Bonus #2 cultivar yielded the highest production of marketable fruit, but were later in production, while Hy Mark cultivar had early production but a lower number of fruit per plant. The winter planting yielded higher production of marketable fruit while summer plantings yielded lower number of fruit per plant, but with higher average weigh. The combination between cultivation systems and cultivars yielded higher fruit production in winter.

Damages occurrence and determination of dasineura Sp. (Díptera: Cecidomyiidae) in the pepper cultivars (Capsicum annuum L.) in piracicaba Sp.

The purpose of this study was to evaluate the damage potential of Dasineura sp. (Diptera: Cecidomyiidae) in the pepper cultivars and show its occurrence in Piracicaba, SP. This experiment was carried out from July to November 1998. The occurrence and damages pest in the fruits were determined by weekly evaluations of pepper hybrids, 'Magali R.' larvals were collected from floral buttons and adults were collected from the incubation of buttons in humidity chamber. Healthy and infested fruits were evaluated for damages caused by pest insects. The results indicated that the damages can reach 100% in some periods of evaluation and that the production losses are significantly high with no application of insecticides. The taxonomy study was performed at National Museum of Federal University of Rio de Janeiro (UFRJ). The insect species classification will be the object of study since there is a possibility of observing a specie not described yet.

Mango cultivars behavior in relation to fusarium subglutinans

The mango malformation, caused by the fungus Fusarium subglutinans Wollenweb & Reinking, is probably one of the diseases that causes more damages in the mangoes production in Brazil and other producing countries. This fungus was isolated of a Tommy Atkins plant with advanced symptoms of malformation, purified and prepared to be inoculated in 15 cultivars of national and imported mangoes. Initially, 10 cultivars had been inoculated in July/2000: Bourbon IAC - 100, Coração de Boi, Keitt, Parvin, Primor de Amoreira, Sensation, Smith, Surpresa, Tommy Atkins and Van Dyke. Another group was inoculated in December/2000, on the cultivars: Adams, Bhadauran, Palmer, Princesa and Zill, and with others cultivars Primor de Amoreira, Sensation and Tommy Atkins, that were inoculated in the first time, with the purpose to compare the two times of inoculation. Throughout the evaluated data at the two times of inoculation, after 11 months of evaluation, were maden the analysis of the variance in function of the involved sources of variation and the test of Duncan to compare the averages of inoculated cultivars. With the results obtained, the cultivars Bhadauran, Palmer, Parvin, Sensation, Van Dyke and Zill presents less percentage of plants with malformation symptoms or less progression of symptoms in relation to the others inoculated cultivars, under protected environmental conditions, where the assays were carried out.

Yield and fruit size distribution of processing tomato cultivars

The productivity and fruit size distribution of 28 processing tomato cultivars were analyzed to determine the ones with potential for fresh market. The experiment was done in Jaboticabal-SP, Brazil (21o15'22'' South, 48o18'58'' West, altitude 595 m), in a Haplorthox soil, from June to December. The cultivars H 7155, Hypeel 108, Andino, U 573, H 9036, Ipa 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Peelmech, Curicó, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570 and PSX 37511 were evaluated. The experimental design was randomized blocks, with four repetitions, and five plants per experimental unit. Fruits harvested from each experimental unit were counted, classified by transversal diameter (large, medium, small, very small and cull) and then weighed. Cultivars AG 72, H 9498, Hypeel 45, RPT 1095 and Curicó yielded more than 70 fruits per plant, on average. The total production per plant of cultivars AG 72, H 9498, Hypeel 45, H 7155, Hypeel 108, Halley, Hitech, RPT 1095, H 9494, H 9036 and Curicó was greater than 4 kg. Considering the weight of large and medium fruits, categories which are important for fresh market, the cultivars H 2710, Botu 13, U 573, Hypeel 45, Yuba, RPT 1294 and Ipa 6 presented values above 50% for production.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Analysis of combining ability in soybean cultivars

Eight soybean cultivars (Doko, Bossier, Ocepar-4, BR-15, FT-Cometa, Savana, Paraná and Cristalina) were crossed in a diallel design. Plants of the F1 generation and their parents were evaluated under short-day conditions for the determination of the general (GCA) and specific (SCA) combining ability. The estimated GCA and SCA values were significant for the evaluated traits except for the total cycle. Highest GCA effects for the traits days to flowering, plant height, insertion height, number of branches and total cycle were estimated for the cultivars Doko, Cristalina and Savana. The variability observed in the trait days to flowering can, for the most part, be explained by additive effects.

Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

Production of four cultivars of iceberg lettuce, under protected cultivation, with and without black polyethylene ground cover

The aim of the work was to evaluate the performance of four cultivars of iceberg lettuce, in a greenhouse, with and without ground cover. The experimental design adopted was that of subdivided parcels, where parcels were provided with and without ground cover consisting of black polyethylene and the subparcels consisted of the cultivars. There were three repetitions per treatment and six central plants of each parcel were evaluated. Drip irrigation was utilized. The cultivars studied were: 'Laurel', 'AF-389', 'Mayara' and 'Tainá'. The seeds were planted in Styrofoam trays with 288 cells containing the substrate Plantmax Hortaliças® A. The trays were kept in a greenhouse until transplanting, 25 days after seeding. The parameters examined were: fresh weight of the aerial part per plant, longitudinal (DL) and transverse (DT) diameters of the head, height of the plant and mean number of leaves per plant. Only among the cultivars there were significant differences in transverse and longitudinal diameters of the head and height of the plant. No significant interactions were detected between ground cover and cultivars. With regard to longitudinal and transverse diameters, 'AF-839' (DL = 27.11 cm; DT = 24.53 cm) showed smaller diameters than those of 'Laurel' (DL = 31.13 cm; DT = 30.55 cm), but did not differ from the other cultivars. In regard to height of the plants, 'Laurel' (20.66 cm) had the greatest value and 'AF-839' (16.02 cm) the lowest. The cultivars did not differ with respect to mean number of leaves and fresh weight of the aerial part of the plant. It is concluded that there were no significant differences in the cultivation of the iceberg lettuce with and without ground cover. The cultivar 'Laurel' stood out with respect to longitudinal and transverse diameters and height of the plant, only differing from the 'AF-839' with regard to the diameters.

Efeito do desbaste seletivo nas estimativas de parâmetros genéticos em progénies de Pinus caribaea Morelet var. hondurensis

The objective of this work was to study the effect of selective thinning on the estimates of genetic parameters in progenies of Pinus caribaea var. hondurensis. The progeny test was installed in June 1986, following a 10 × 10, triple square lattice design, containing ten trees in linear plots in 3.0 × 3.0m spacing. Twelve years after the planting, a selective thinning based on Multi-effect index (selection for DBH) was performed, leaving six trees per plot. The assessments were done in four situations: A (before thinning); B (among thinned trees); C (among remnant trees at 13 years of age) and D (two years after the thinning). The following traits were analyzed: total height (H), diameter at breast height (DBH), volume (VOL), stem form (FOR), foxtail (FT), wood density at 1.3 m (WD1) and wood density at the half height (WD2). The thinning led to increase in the estimates of variability among progenies for VOL and decrease for ALT and DBH. There was a high and positive genetic correlation among the growth traits, mainly between DBH and VOL. The latter remained unchanged after thinning. The narrow-sense heritabilities at the individual level, showed a slight increase while at the family mean level had a reduction with the thinning. The estimates of breeding values increased with the thinning. This may lead to an easier identification of the best progenies in further selection.

Effect of plastic film mulch on the production of butterhead lettuce cultivars under protected cultivation

The study was performed in a greenhouse with the aim of evaluating the production of butterhead lettuce cultivars with and without plastic film mulch in the summer. The cultivars studied were 'Elisa', 'Lídia', 'Herman' and 'Luísa'. The experimental design was a split plot, in which the main plot was plastic film mulch (with or without black polyethylene film) and the subplots were the cultivars, with three repetitions. The seedlings were grown in Styrofoam trays of 288 cells and transplanted 25 days after seeding in a space of 25 × 25 cm. Harvests were carried out 45 days after transplanting and the following variables were determined: fresh and dry weights of the aerial part, number of leaves per plant, plant height and the longitudinal and transverse diameters of the plant. Significant differences were found only among the cultivars for the characteristics studied, with no cover × cultivar interaction. Fresh weight of the aerial part of 'Lídia' (270.9 g) was greater than that of 'Herman' (142.5 g), but did not differ from those of 'Luísa' (229.8 g) or 'Elisa' (204.8). The dry weight of the aerial part of 'Lídia' (12.4 g) differed statistically only with respect to that of 'Herman' (7.9 g). The cultivars 'Luísa' and 'Elisa' had an aerial part dry weight of 11.4 and 11.2 g, respectively. The number of leaves per plant of the cultivars 'Luísa' (45.1) and 'Elisa' (43.0) was higher than for 'Herman' (24.05), but did not differ from that of the cultivar 'Lídia' (39.5). The mean transverse and longitudinal diameters, as well as the mean height of the plants, showed that 'Lídia', 'Elisa' and 'Luísa' had the greatest values. The cultivars 'Lídia', 'Elisa' and 'Luísa' were the most productive and plastic film mulch had no effect on lettuce production under protected cultivation.

Sugarcane (Saccharum X officinarum): A Reference Study for the Regulation of Genetically Modified Cultivars in Brazil

Global interest in sugarcane has increased significantly in recent years due to its economic impact on sustainable energy production. Sugarcane breeding and better agronomic practices have contributed to a huge increase in sugarcane yield in the last 30 years. Additional increases in sugarcane yield are expected to result from the use of biotechnology tools in the near future. Genetically modified (GM) sugarcane that incorporates genes to increase resistance to biotic and abiotic stresses could play a major role in achieving this goal. However, to bring GM sugarcane to the market, it is necessary to follow a regulatory process that will evaluate the environmental and health impacts of this crop. The regulatory review process is usually accomplished through a comparison of the biology and composition of the GM cultivar and a non-GM counterpart. This review intends to provide information on non-GM sugarcane biology, genetics, breeding, agronomic management, processing, products and byproducts, as well as the current technologies used to develop GM sugarcane, with the aim of assisting regulators in the decision-making process regarding the commercial release of GM sugarcane cultivars. © 2011 The Author(s).