Structural Integrity of the Contralesional Hemisphere Predicts Cognitive Impairment in Ischemic Stroke at Three Months

After stroke, white matter integrity can be affected both locally and distally to the primary lesion location. It has been shown that tract disruption in mirror's regions of the contralateral hemisphere is associated with degree of functional impairment. Fourteen patients suffering right hemispheric focal stroke (S) and eighteen healthy controls (HC) underwent Diffusion Weighted Imaging (DWI) and neuropsychological assessment. The stroke patient group was divided into poor (SP; n = 8) and good (SG; n = 6) cognitive recovery groups according to their cognitive improvement from the acute phase (72 hours after stroke) to the subacute phase (3 months post-stroke). Whole-brain DWI data analysis was performed by computing Diffusion Tensor Imaging (DTI) followed by Tract Based Spatial Statistics (TBSS). Assessment of effects was obtained computing the correlation of the projections on TBSS skeleton of Fractional Anisotropy (FA) and Radial Diffusivity (RD) with cognitive test results. Significant decrease of FA was found only in right brain anatomical areas for the S group when compared to the HC group. Analyzed separately, stroke patients with poor cognitive recovery showed additional significant FA decrease in several left hemisphere regions; whereas SG patients showed significant decrease only in the left genu of corpus callosum when compared to the HC. For the SG group, whole brain analysis revealed significant correlation between the performance in the Semantic Fluency test and the FA in the right hemisphere as well as between the performance in the Grooved Pegboard Test (GPT) and theTrail Making Test-part A and the FA in the left hemisphere. For the SP group, correlation analysis revealed significant correlation between the performance in the GPT and the FA in the right hemisphere.

Fluorescence cross-correlation spectroscopy to study hemodynamics

[EN] In the recent years a series of optical correlation techniques have been developed in order to be able to measure flow velocity with high spatial resolution while being non-invasive in order to be employed in-vivo on biological organisms. The technique employed in my thesis work, scanning laser image correlation (SLIC), is a powerful approach for the detection of flow motions because it overcomes some limitations of the classical spectroscopy techniques. SLIC method consists in repeated laser scans over a linear pattern and on the cross correlation of the signal emitted by the excited fluorophores in different positions along the scan line. Therefore, the resulting measurements for flow velocity are really accurate.

River Dart Salmon Project. Summary of Phase I report.

This is the River Dart Salmon Project Summary of Phase I Report (2002) by the Westcountry Rivers Trust. The report contains sections on the introduction to Dart Salmon, factors affecting salmon numbers, salmon rod catch and salmon electro-fishing data, and a summary and discussion of the next phase. It also contains two tables with time series analysis on fry/parr numbers in representative section of the River Dart and figures with trends in fry/parrs numbers at juveniles electro-fishing sites. The section on salmon rod catch data includes trend analysis, cross-correlation of catches in different rivers and a general conclusion.

Prediction of sound emission from open turbulent premixed flames

The sound emission from open turbulent flames is dictated by the two-point spatial correlation of rate of change of fluctuating heat release rate and this correlation has not been investigated directly in the past studies. Turbulent premixed flame data from DNS and laser diagnostics are analyzed to study this correlation function and the two-point spatial correlation of the fluctuating heat release rate. This shows that the correlation functions have simple Gaussian forms whose integral length scale is related to the laminar flame thickness and amplitude depends on the spatial distribution of the time-mean rate of heat release. These results and RANS-CFD solution of open turbulent premixed flames are post-processed to obtain the far field SPL, which agrees well with measured values. © 2010 by the American Institute of Aeronautics and Astronautics, Inc.

Effect of stocking density on growth of tiger shrimp (Penaeus monodon Fab.) fed on commercial formulated diets

Three different stocking rates in a semi-intensive pilot shrimp project was adopted in duplicates of three treatments designated as T1, T2 and T3 having initial per meter square stocking density of shrimp of 40, 44 and 51 respectively of 0.025g size post larva. The study was conducted for 84 days. Commercial pelleted diets designated as starter - 1, 2, 3 and grower were fed at a satiation level during the study period with a feeding frequency of 4 to 5 times per day. Feed rationing was based on the survivability, body weight and tray checking. 5-25% of the pond water was exchanged daily. Sampling was done for growth after every 2nd week. Monthly sampling was done for mortality in the ponds. Mean weight gain of the shrimp in treatments T1, T2 and T3 were 16.96 ± 1.14, 16.04 ± 1.38 and 14.08 ± 1.17g respectively and T1 with a low stocking density showed a significantly best growth among the treatments. Total mortality in treatments T1, T2 and T3 were as 30.00, 39.77 and 31.37% respectively. Significantly higher feed conversion ratio (FCR) of 1.87 was obtained with shrimp in treatment T3 followed by shrimp in T1 and T2 with FCR values of 1.70 and 1.41 respectively. A positive correlation of growth and salinity was observed during the study. Total production per unit area was the highest in the treatment T3 (4928 kg/ha) and followed by T1 (4747 kg/ha) and T2 (4251 kg/ha). The result show significantly negative correlation between individual growth and density.

Observation on some of the environmental parameters of selected shrimp farms in Khulna, Bangladesh

In recent years, the ecological degradation, loss of technological sustenance and other multidimensional consequences caused by shrimp farming have made the experts and authorities bound to rethink about the development of the industry. The present study describes the water and sediment quality, and culture and management techniques in five selected shrimp farms at Paikgacha, Khulna throughout a production cycle from March to September 1997. The water quality parameters were found to be more or less suitable throughout the cycle. The concentration of the limiting major nutrients such as nitrogen and phosphorus and minor nutrients such as calcium and magnesium were satisfactorily high, concentrations of the organic matter content were also high. Remarkable negative correlation of shrimp production with secchi depth was observed among the farms. Production per cycle ranged between 273 kg/ha and as low as 63 kg/ha.

Reproductive biology of freshwater crab, Paratelphusa spinigera, Wood Mason (Crustacea-Decapoda)

This study was aimed to analyze the annual reproductive cycle of the freshwater crab Paratelphusa spinigera (Wood Mason, 1871). P. spinigera breeds only once in a year; hence, it is a monovoltine species. Gonad maturation, changes in abdomen shape, size and female maturity index (FMI) marked the onset of sexual maturity of female P. spinigera. The occurrence of berried females marked the onset of breeding season. The fecundity of P. spinigera ranged from 533 to 1306 in number, with an average of 699.11 ± 217.38. The correlation of fecundity with carapace width and body weight was also found to be positively significant (r = 0. 780 and 0.933, respectively). The eggs were carried on the pleopods and nurtured for approximately 30-35 days, until the eggs hatch, showing perfect maternal care. The FMI values ranging between 0.70 and 0.80 represented immature stage of gonadal development. When the FMI ranged from 0.91 to 1.00, all stages of gonadal development, i.e. developing, maturing and mature stages were observed. The females with fully ripe ovary had FMI values greater than 1.00.

Adaptive control of stiffness to stabilize hand position with large loads.

The goal of this work was to investigate stability in relation to the magnitude and direction of forces applied by the hand. The endpoint stiffness and joint stiffness of the arm were measured during a postural task in which subjects exerted up to 30% maximum voluntary force in each of four directions while controlling the position of the hand. All four coefficients of the joint stiffness matrix were found to vary linearly with both elbow and shoulder torque. This contrasts with the results of a previous study, which employed a force control task and concluded that the joint stiffness coefficients varied linearly with either shoulder or elbow torque but not both. Joint stiffness was transformed into endpoint stiffness to compare the effect on stability as endpoint force increased. When the joint stiffness coefficients were modeled as varying with the net torque at only one joint, as in the previous study, we found that hand position became unstable if endpoint force exceeded about 22 N in a specific direction. This did not occur when the joint stiffness coefficients were modeled as varying with the net torque at both joints, as in the present study. Rather, hand position became increasingly more stable as endpoint force increased for all directions of applied force. Our analysis suggests that co-contraction of biarticular muscles was primarily responsible for the increased stability. This clearly demonstrates how the central nervous system can selectively adapt the impedance of the arm in a specific direction to stabilize hand position when the force applied by the hand has a destabilizing effect in that direction.

Study of distribution, growth and reproduction polychaetes Nereidae in intertidal zone of Bandar Abbas and effect dominant species on white Indian shrimp brood stocks (Fenneropenaeus indicus)

Distribution of polychaetes worms Nereidae in intertidal zone of Bandar Abbass indicated that distribution rate of worms from the west to east for the reason status of seabed type, habitat and feeding substrate used to worms increased. Also investigation description that last-mentioned worms are belong to Nereididae family, Perinereis genus and species of Perinereis nuntia. By viewpoint seabed soil types experiments implement indicated Nereididae worms have higher survival with sandy clay loam soil texture. Statistical analysis showed positive relation coefficient correlation of Pearson between substrate type to frequency of worms and too substrate type with soil organic matter value (P<0.05). By viewpoint feeding also experiments with different feed treatment indicated that Nereid worms is Omnivore but in natural condition more utilized algae substrate special Entermorpha and survival rate had the worms last-mentioned in dietary treatments on this algae 93/3% different significant with other treatments (P<0.05). In this project pond-reared white Indian shrimp (Fenneropenaeus indicus) were used in four maturation and spawning trials lasting 60 days. one group of shrimps was fed a formulated pelleted special of broodstock diet only, a second group was fed squid meat diet; a third group of shrimps with mollusca (Solen vagina) meat diet and fourth group was fed polychaete worms Nereidae family, collected in intertidal zone of Bandar Abbass. Four types of dietary treatments (M1, M4) were given to separate batches that were run in three duplicate. Results of experiments demonstrate that more grew rate and maturation and spawning rate and we found that shrimps fed with polychaete worms have the best condition and then shrimps fed with solen. This is demonstrate furthermore environmental circumstance, endocrine hormone, types of feed important of maturation and spawning of shrimps and in polychaete worms used HUFA help to maturation ovarian in shrimp.

Optical trapping of carbon nanotubes and graphene

We study optical trapping of nanotubes and graphene. We extract the distribution of both centre-of-mass and angular fuctuations from three-dimensional tracking of these optically trapped carbon nanostructures. The optical force and torque constants are measured from auto and cross-correlation of the tracking signals. We demonstrate that nanotubes enable nanometer spatial, and femto-Newton force resolution in photonic force microscopy by accurately measuring the radiation pressure in a double frequency optical tweezers. Finally, we integrate optical trapping with Raman and photoluminescence spectroscopy demonstrating the use of a Raman and photoluminescence tweezers by investigating the spectroscopy of nanotubes and graphene fakes in solution. Experimental results are compared with calculations based on electromagnetic scattering theory. © 2011 by the Author(s); licensee Accademia Peloritana dei Pericolanti, Messina, Italy.

Comparative study of vision tracking methods for tracking of construction site resources

Vision tracking has significant potential for tracking resources on large scale, congested construction sites, where a small number of cameras strategically placed around the site could replace hundreds of tracking tags. The correlation of vision tracking 2D positions from multiple views can provide the 3D position. However, there are many 2D vision trackers available in the literature, and little information is available on which one is most effective for construction applications. In this paper, a comparative study of various vision tracker categories is carried out, to identify which one is most effective in tracking construction resources. Testing parameters for evaluating categories of trackers are identified, and benefits and limitations of each category are presented. The most promising trackers are tested using a database of construction operations videos. The results indicate the effectiveness of each tracker in relation to each parameter of the test, and the most suitable tracker needed to research effective 3D vision trackers of construction resources.

Correlations between the morphology and emission properties of trench defects in InGaN/GaN quantum wells

Atomic force microscopy (AFM) and scanning electron microscopy (SEM) with cathodoluminescence (CL) were performed on exactly the same defects in a blue-emitting InGaN/GaN multiple quantum well (QW) sample enabling the direct correlation of the morphology of an individual defect with its emission properties. The defects in question are observed in AFM and SEM as a trench partially or fully enclosing a region of the QW having altered emission properties. Their sub-surface structure has previously been shown to consist of a basal plane stacking fault (BSF) in the plane of the QW stack, and a stacking mismatch boundary (SMB) which opens up into a trench at the sample surface. In CL, the material enclosed by the trench may emit more or less intensely than the surrounding material, but always exhibits a redshift relative to the surrounding material. A strong correlation exists between the width of the trench and both the redshift and the intensity ratio, with the widest trenches surrounding regions which exhibit the brightest and most redshifted emission. Based on studies of the evolution of the trench width with the number of QWs from four additional MQW samples, we conclude that in order for a trench defect to emit intense, strongly redshifted light, the BSF must be formed in the early stages of the growth of the QW stack. The data suggest that the SMB may act as a non-radiative recombination center. © 2013 American Institute of Physics.

A computational fluid-structure interaction study of inflation cycles of a tension cone decelerator

Inflatable aerodynamic decelerators present potential advantages for planetary entry in missions of robotic and human exploration. The design of these structures face many engineering challenges, including complex deformable geometries, anisotropic material response, and coupled shockturbulence interactions. In this paper, we describe a comprehensive computational fluid-structure interaction study of an inflation cycle of a tension cone decelerator in supersonic flow and compare the simulations with earlier published experimental results. The aeroshell design and flow conditions closely match recent experiments conducted at Mach 2.5. The structural model is a 16-sided polygonal tension cone with seams between each segment. The computational model utilizes adaptive mesh refinement, large-eddy simulation, and shell mechanics with self-contact modeling to represent the flow and structure interaction. This study focuses on the dynamics of the structure as the inflation pressure varies gradually, and the behavior of forces experienced by the flexible and rigid (the payload capsule) structures. © 2011 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Effects of Arsenate on Microcystin Content and Leakage of Microcystis Strain PCC7806 Under Various Phosphate Regimes

Both arsenic pollution and eutrophication are prominent environmental issues when considering the problem of global water pollution. It is important to reveal the effects of arsenic species on cyanobacterial growth and toxin yields to assess ecological risk of arsenic pollution or at least understand naturally occurring blooms. The sensitivity of cyanobacteria to arsenate has often been linked to the structural similarities of arsenate and phosphate. Thus, we approached the effect of arsenate with concentrations from 10(-8) to 10(-4) M on Microcystis strain PCC7806 under various phosphate regimes. The present study showed that Microcystis strain PCC7806 was arsenate tolerant up to 10(-4) M. And such tolerance was without reference to both content of intra- and extra-cellular phosphate. It seems that arsenate involved the regulation of microcystin synthesis and cellular polyphosphate contributed to microcystin production of Microcystis responding to arsenate, since there was a positive linear correlation of the cellular microcystin quota with the exposure concentration of arsenate when the cells were not preconditioned to phosphate starvation. It is presumed that arsenate could help to actively export microcystins from living Microcystis cells when preconditioned to phosphate starvation and incubated with the medium containing 1 mu M phosphate. This study firstly provided evidence that microcystin content and/or release of Microcystis might be impacted by arsenate if it exists in harmful algal blooms. (C) 2008 Wiley Periodicals, Inc. Environ Toxicol 24:97 94, 2009.

Nonylphenol and octylphenol in urban eutrophic lakes of the subtropical China

The paper studied two estrogenic pollutants, 4-nonylphenol (NP) and 4-tert-octylphenol (OP) in water, suspended particle (SP) and sediments in urban eutrophic lakes. The concentrations of NP ranged from 1.94 to 32.85 mu g/l, 0.876 to 31.13 mu g/l and 3.54 to 32.43 mu g/g dry weight (dw) in water, suspended particle (SP) and sediments, respectively, and that of OP from 0.027 to 1.44 mu g/l, 0.008 to 1.777 mu g/l and 0.058 to 1.245 mu g/g dw in water, suspended particle (SP) and sediments, respectively. An increasing trend in the concentration was noticed in all matrices close to the sewage inlets, which was found to be the major factor affecting the spatial distribution of alkylphenols (APs) in the lakes. Due to restoration of submerged macrophytes, which might accumulate APs, the contaminations of APs in the Little Moon Lake (LML) and the Little Lotus Lake (LLL) were lower than those in the Big, Moon Lake (BML) and the Bier Lotus Lake (BLL). A reasonable correlation of NP and OP was obtained among water, suspended particle and sediment. The possible environmental stress of APs concentration on aquatic organisms in Wuhan urban lakes was also discussed.