Rehydration of corn grain with acid whey improves the silage quality

Our objective was to investigate the effects of rehydration with acid whey or water at three moisture levels, as well as the effects of bacterial inoculation, on the fermentation, chemical composition and aerobic stability of corn grain silages. The trial was conducted in a completely randomized design with four replicates in a factorial arrangement as follows: 3 (rehydration with three different moisture levels: 300,350 and 400 mL/kg of corn grain)x 2 (silage inoculated with bacteria or not inoculated (control))x 2 (liquid used in the rehydration: acid whey or water). Overall, corn grain silages rehydrated with acid whey produced more lactic acid than the silages rehydrated with water (13.8 vs. 12.6 g/kg of dry matter (DM), respectively). In addition, increases in the rehydration of corn grain silages promoted decreases (linear) in lactic acid concentration as well as in production of total acids. Although inoculated silages had higher pH as consequence of the rehydration using water at the three levels, these treatments presented high DM recovery. In general, neutral detergent fiber (aNDFom) decreased if inoculant was applied in corn grain silages rehydrated with acid whey. After silos opening, silages rehydrated with 350 or 400 mL/kg (independent of the liquid) had lower aerobic stability than silages rehydrated with 300 mL/kg. Overall, we found that the inoculant did not promote significant changes in the composition of the corn grain silage. In contrast, the potential of the use of acid whey in ensiling corn grain is high, as its addition leads to improvements in the fermentation process and aerobic stability of the silages. (C) 2014 Elsevier B.V. All rights reserved.

Effects of feeding corn silage inoculated with microbial additives on the ruminal fermentation, microbial protein yield, and growth performance of lambs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The physiology and impact on fertility of the period of proestrus in lactating dairy cows

In cattle, proestrus begins with the initiation of luteolysis and ends with initiation of estrus and the GnRH/LH surge. This period is marked by a dramatic decrease in circulating progesterone (P4) that reaches a nadir by about 36-48 h in cows undergoing natural or prostaglandin F2 alpha (PGF)-induced luteolysis. Inadequate luteolysis is a cause of reduced fertility particularly in timed AI programs with small elevations in circulating P4 reducing fertility. Increasing circulating estradiol (E2) during proestrus is dependent on presence, size, and function of the dominant follicle and this varies during natural proestrus, due to whether animals have two or three follicular waves, and during PGF-induced proestrus, according to stage of the follicular wave at time of PGF treatment. Inadequate circulating E2 can limit fertility and increase pregnancy loss in some specific circumstances such as in cows with low BCS and in cows during heat stress. Thus, studies to optimize the length of proestrus and the concentrations of E2 and P4 during proestrus could produce substantial improvements in fertility and reductions in pregnancy loss.

MINERAL NITROGEN SUBSTITUTION BY CHICKEN LITTER IN SUCCESSION OAT/CORN

The constant search for sustainability of production systems have driven research to find alternatives to the problems arising from the intensified use such systems. In this context the present work aimed study the effects of substitution of mineral nitrogen by chicken litter in oat and corn crop in succession and the chemical characteristics of soil. The study was conducted during the period May 2009 to March 2010 in area of Oxisol. The design was of randomized block with four replications. The six treatments were obtained by a combination of different amounts of chicken litter (0, 1500, 3000, 4500, 6000 and 7500 kg ha(-1)) applied 30 days before the sowing of oats combined with the mineral nitrogen applied in coverage in corn (311.1, 257.8, 202.2, 148.9, 95.6, 42.2 kg ha(-1) of urea), for the total supply of 140 kg ha(-1) of nitrogen (N). The application of poultry litter in oat promotes increased the production of dry matter, and content and accumulation of N. The mineral nitrogen substitution by chicken litter increases the yield of corn crop. The use of poultry litter alters the chemical properties of soil, increasing the levels of organic matter, exchangeable Al and acidity potential. However lowers the pH, K, Ca, Mg, sum of bases and base saturation.

RESPONSE OF CORN GROWN IN TILLAGE SYSTEM FOR THE APPLICATION OF NITROGEN DOSES IN A SEQUENCE OF PLANT COVER

The use of cover crops can produce large amounts of biomass, improving the cycling of nutrients, particularly nitrogen, promoting productivity gains and cost savings. Given this, the objective was to evaluate the use of N rates associated to cover crops grown in pre-harvest nutritional status, nitrogen accumulation and corn yield in both years. The experiment was conducted in an Oxisol with maize, no-tillage system. The experimental design was a randomized block, split plot with four replications. The main treatments were: six cropping systems (sun hemp, jack bean, lablab, millet, and velvet bean fallow) in secondary treatments: four doses of nitrogen (0, 60, 120 and 180 kg ha(-1) N). Corn yield was not affected by the type of coverage for pre-season, regardless of the nitrogen applied in the soil. Still, the use of nitrogen fertilizer in the soil promotes gains in grain yield in the first year of cultivation, regardless of the type of coverage in pre-season. In the first year (2006/2007) the species of coverage produced more biomass were velvet bean, jack bean, sun hemp and lablab, while in the second year (2007/08) were the sun hemp, millet, lablab, jack bean and velvet bean, respectively.

SEQUENTIAL SAMPLING AND MICROSATELLITES FOR EVALUATION OF THE GENETIC QUALITY IN CORN SEEDS LOTS

In the seed production system, genetic purity is one of the fundamental requirements for its commercialization. The present work had the goal of determined the sample size for genetic purity evaluation, in order to protect the seed consumer and the producer and to evaluate the sensitivity of microsatellite technique for discriminating hybrids from their respective relatives and for detecting mixtures when they are present in small amounts in the samples. For the sequential sampling, hybrid seeds were marked and mixed in with the seed lots, simulating the following levels of contamination: 0.25, 0.5, 1.0, 2.0, 4.0, and 6.0%. After this, groups of 40 seeds were taken in sequence, up to a maximum of 400 seeds, with the objective of determining the quantity of seeds necessary to detect the percentage of mixture mentioned above. The sensitivity of microsatellite technique was evaluated by mixing different proportions of DNA from the hybrids with their respective seed lines. For the level of mixture was higher than 1:8 (1P1:8P2; 8P1:1P2), the sensitivity of the marker in detecting different proportions of the mixture varied according to the primer used. In terms of the sequential sampling, it was verified that in order to detect mixture levels higher than 1% within the seed lot- with a risk level for both the producer and the consumer of 0.05- the size of the necessary sample was smaller than the size needed for the fixed sample size. This also made it possible to reduce costs, making it possible to use microsatellites to certify the genetic purity of corn seeds lots.

INFLUENCE OF NOZZLE TYPE AND SPRAY RATES ON CORN AND WEED PLANTS DROP DEPOSITIONS

The objective of this study was to evaluate different nozzles and spray rates on drop deposition in corn (Zea mays), Euphorbia heterophylla and Brachiaria plantaginea, both weeds located at and between crop rows. The experimental design established was complete random blocks with treatments arranged at 2 x 2 factorial scheme (2 nozzles types: DG11002VS flat flan and medium droplets, TXVK08 cone and very fine droplets; and 2 rates: 100 and 200 L ha(-1)) with four replications. The spray applications occurred at 13 days after corn germination (3-5 expanded leaves), when E. heterophylla and B. plantaginea plants had 2-4 and 2-3 leaves, respectively. Solution of Brilliant Blue (FD&C-1) dye at 3,000 ppm was used as spray tracer. It was concluded that the greatest average deposits in corn plants was provided by TXVK08, independently of the spray rates used. The most uniform deposits occurred when the spray rates of 200 L ha(-1) was used. Spray deposits were most uniform in B. plantaginea compared to E. heterophylla when both weds were located at crop row, independently of nozzle or spray rates. However, the DG 11002VS spray nozzle provided the most uniform drop deposition on B. plantaginea located between the rows, while the most efficient deposition over E. heterophylla located between rows was TXVK08.

Short-term effect of alginate-biochar microbeads in corn germination

Biochar is the solid by-product of biomass pyrolysis. It is a promising soil conditioner and can be a material with high aggregate economic value, since its performance can improve plant’s nutrient utilization and reduce the usage of conventional fertilizers. Biochar can be used in the formulation of new types of fertilizers as polymeric microbeads. These microbeads can be enriched with biochar and nutrients in its matrix to form fertilizers of slow release of nutrients. Thus, as a promising agricultural material, it is important to assess the environmental hazards caused by the implementation of these microbeads. In this context, seeds were sown in a soil-less Petri dish with microbeads produced with biochar from sugarcane enriched with or without phosphate. The seeds germination and its vitality were evaluated by the first germination count (FGC) and the germination speed index (GSI). The short-term effects showed that the microbeads, in general, assessed by the means of FGC, GSI and mass gain showed the best performance, suggesting that the environment created by these materials provided the best chemical and physical interaction with the embryonic axes.

Apparent protein and energy digestibility and amino acid availability of corn and co-products in extruded diets for nile tilapia, oreochromis niloticus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Characterization of corn (Zea mays) leaf powder and Its adsorption properties regarding Cu(II) and Cd(II) from aqueous samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Formulations of Melia azedarach to control diabrotica speciosa (germar) (coleoptera: chrysomelidae) larvae in corn and plant enhancement

We evaluated oil and powder formulations of Melia azedarach for controlling larvae of Diabrotica speciosa (Germar) in corn and plant enhancement. Five concentrations of each formulation were evaluated and compared to fipronil (negative control) and distilled water (positive control). After treatment, the number of surviving insects (larvae, pupae, and adults), the adult body weight, the sex ratio, and the longevity were recorded, while the height, dry weight of aerial part and roots, and number of leaves of plants were measured. The oil formulation at 4.0 mL reduced the larvae population of D. speciosa similarly to the insecticide fipronil, which resulted in greater height, dry weight of the root system, and number of leaves. Powder formulation at concentrations of 40, 80, and 160 mg caused larval mortality above 80%; however, these concentrations did not prevent reduction of plant height and dry weight of aerial part. Further studies assessing the residual period of M. azedarach control against D. speciosa larvae and its phytotoxicity, which are common traits associated with azadirachtin application, are necessary to subsidize the next steps of this alternative control strategy.

Impact of the processes of total testicular regression and recrudescence on the epididymal physiology of the bat myotis nigricans (chiroptera: vespertilionidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ventilatory, metabolic, and thermal responses to hypercapnia in female rats: effects of estrous cycle, ovariectomy, and hormonal replacement

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agronomic and chemical characteristics of hybrid corn to ensiling

Our aim was to evaluate agronomic and chemical characteristics of corn hybrids to ensiling. It were evaluated nine corn hybrids (MX 300, RB 9308, 2B655, XB 6012, GNZ 2500, PL6890, PRE 32D10, PRE 22T10 e AG 1051), with three replicates. The higher fresh matter yield were observed in the hybrids PL6890 and PRE 32D10, while the dry matter yield was observed in the hybrid PRE 32D10 (13.43 t ha(-1)). The hybrids PRE 32D10 and PRE 22T10 stood out to present higher percent of leaf in relation to whole plant, while the lower percent of stems was found in the hybrids MX 300, 2B655 and XB 6012, however the higher leaves: stems relation was found in XB 6012 (0.49). There was higher CP content in the hybrid PRE 32D10 (9.10% of DM), while the lower NDF (57.78% of DM) and cellulose content (24.27% of DM) were observed in the hybrid GNZ 2500. The hybrid PL6890 presented higher ADF and lignin contents, the others hybrids had values lower. The lower NDIN content was observed in the hybrid RB 9308, while the lower AIDN content occurred on the hybrid 2B655. The lower buffer capacity was observed in the hybrid 2B655 (0.29). There are some differences on chemical composition among the corn hybrids used in this study, however, it is recommended to use the hybrids MX 300, PL6890 and PRE 32D10 for showing higher dry matter yield, which may reflect in the amortization of silage production costs.

Site and extent of amino acid digestion in dairy cattle fed with corn and its byproducts

The study was conducted to evaluated the site and extent of dry matter (DM), crude protein (CP), methionine (Met), lysine (Lys), and threonine (Thr) digestion of corn and byproducts obtained from corn germ mixed with different amounts of extruded or non-extruded ether extract (EE) in dairy cattle. Treatments consisted in eight types of feed and two processing in a 4 x 2 factorial design. There were four feeds: corn grain cracked (Corn), corn germ meal with 1% EE (CG1), corn germ meal with 7% EE (CG7), and corn germ meal with 10% EE (CG10). The feeds were processed in one of two ways: extruded (Ex) and not extruded. In situ techniques were used to determine DM, CP, Met, Lys, and Thr partial and total tract digestion. A basic diet was compounded of corn germ meal, soybean meal and coastcross hay in a 70: 30 roughage to concentrate ratio. There was no interaction (P>0.05) between feeds and processing method. Extrusion improved (P<0.05) total tract digestibility of corn DM but not CP. Intestinal digestibility was similar (P>0.05) for corn and corn germ meal mixed with 7 and 10% EE, regardless of EE processing method. The CP total tract digestibility of corn germ meal with 1% non-extruded EE was 16.62% higher (P<0.05) than that of the extruded form. The best total CP digestibility was obtained for corn germ meal with 7% EE, independently of the processing method. The effects of EE processing method on partial and total digestibility differed between amino acid. Corn and corn byproduct extrusion may improve dry matter digestibility, but do not necessarily influence crude protein digestion. Ruminal and intestinal digestibility of Met, Lys, and Thr depends on both feed type and processing method. Therefore, amino acid availability should be considered individually.