Cell-to-cell contact-independent regulatory T cells in human tuberculosis

info:eu-repo/semantics/nonPublished

The effect of reflow process on the contact resistance and reliability of anisotropic conductive film interconnection for flip chip on flex applications

The work presented in this paper focuses on the effect of reflow process on the contact resistance and reliability of anisotropic conductive film (ACF) interconnection. The contact resistance of ACF interconnection increases after reflow process due to the decrease in contact area of the conducting particles between the mating I/O pads. However, the relationship between the contact resistance and bonding parameters of the ACF interconnection with reflow treatment follows the similar trend to that of the as-bonded (i.e. without reflow) ACF interconnection. The contact resistance increases as the peak temperature of reflow profile increases. Nearly 40% of the joints were found to be open after reflow with 260 °C peak temperature. During the reflow process, the entrapped (between the chip and substrate) adhesive matrix tries to expand much more than the tiny conductive particles because of the higher coefficient of thermal expansion, the induced thermal stress will try to lift the bump from the pad and decrease the contact area of the conductive path and eventually, leading to a complete loss of electrical contact. In addition, the environmental effect on contact resistance such as high temperature/humidity aging test was also investigated. Compared with the ACF interconnections with Ni/Au bump, higher thermal stress in the Z-direction is accumulated in the ACF interconnections with Au bump during the reflow process owing to the higher bump height, thus greater loss of contact area between the particles and I/O pads leads to an increase of contact resistance and poorer reliability after reflow.

Organisational whistleblowing policies: making employees responsible or liable?

This paper explores the possible impact of the recent legal developments on organizational whistleblowing on the autonomy and responsibility of whistleblowers. In the past thirty years numerous pieces of legislation have been passed to offer protection to whistleblowers from retaliation for disclosing organisational wrongdoing. An area that remains uncertain in relation to whistleblowing and its related policies in organisations, is whether these policies actually increase the individualisation of work, allowing employees to behave in accordance with their conscience and in line with societal expectations or whether they are another management tool to control employees and protect organisations from them. The assumptions of whistleblower protection with regard to moral autonomy are examined in order to clarify the purpose of whistleblower protection at work. The two extreme positions in the discourse of whistleblowing are that whistleblowing legislation and policies either aim to enable individual responsibility and moral autonomy at work, or they aim to protect organisations by allowing them to control employees and make them liable for ethics at work.

The Role of Tool/Sheet Contact in Plug-Assisted Thermoforming.

Plug-assisted thermoforming produces a wide range of polymer products through a combination of deformation by air pressure and contact with tool surfaces. In this paper the role of tool/sheet contact in determining the process output is investigated. A combination of thermoforming, friction and heat transfer tests were carried out on common tool and sheet materials. The results show that the typical friction coefficients for the material combinations are within the range 0.1 to 0.3, but the values rise sharply on approaching thermoforming temperatures. Thermal imaging tests demonstrate that all of the plug materials significantly cool the heated sheet on contact, even over very short periods of time. The temperature of the plug is very important. At low plug temperatures heat transfer effects predominate, whereas at high plug temperatures friction effects predominate. A plug temperature of approximately 100oC balances these effects and creates the most effective material distribution.

Global and local contributions to the optical specification of time to contact: Observer sensitivity to composite tau

First-order time remaining until a moving observer will pass an environmental element is optically specified in two different ways. The specification provided by global tau (based on the pattern of change of angular bearing) requires that the element is stationary and that the direction of motion is accurately detected, whereas the specification provided by composite tau (based on the patterns of change of optical size and optical distance) does not require either of these. We obtained converging evidence,for our hypothesis. that observers are sensitive to composite tau in four experiments involving, relative judgments of, time to, passage with forced-choice methodology. Discrimination performance was enhanced in the presence of a local expansion component, while being unaffected when the detection of the direction of heading was impaired. Observers relied on the information carried in composite tau rather than on the information carried in its constituent components. Finally, performance was similar under conditions of observer motion and conditions of object motion. Because composite tau specifies first-order time remaining for a large number of situations, the different ways in which it may be detected are discussed.

Guiding contact by coupling the taus of gaps

Animals control contact with surfaces when locomoting, catching prey, etc. This requires sensorily guiding the rate of closure of gaps between effecters such as the hands, feet or jaws and destinations such as a ball, the ground and a prey. Control is generally rapid, reliable and robust, even with small nervous systems: the sensorimotor processes are therefore probably rather simple. We tested a hypothesis, based on general tau theory, that closing two gaps simultaneously, as required in many actions, might be achieved simply by keeping the taus of the gaps coupled in constant ratio. tau of a changing gap is defined as the time-to-closure of the gap at the current closure-rate. General tau theory shows that tau of a gap could, in principle, be directly sensed without needing to sense either the gap size or its rate of closure. In our experiment, subjects moved an effector (computer cursor) to a destination zone indicated on the computer monitor, to stop in the zone just as a moving target cursor reached it. The results indicated the subjects achieved the task by keeping tau of the gap between effector and target coupled to tau of the gap between the effector and the destination zone. Evidence of tau -coupling has also been found, for example, in bats guiding landing using echolocation. Thus, it appears that a sensorimotor process used by different species for coordinating the closure of two or more gaps between effecters and destinations entails constantly sensing the taus of the gaps and moving so as to keep the taus coupled in constant ratio.

Contact as a Policy Mechanisim in Integrated schools in Israel and Northern Ireland

Policy initiatives in inter-group education evolved in Northern Ireland and Israel at around the same
time. In each jurisdiction, the emphasis is on improving relations between protagonist groups in
ethnically divided societies. Central to this objective and at the core of integrated education
(Northern Ireland) and bilingual/bi-national education (Israel) is sustained contact in a shared
learning environment. Based on qualitative research in four schools, this paper examines the nature
of the contact experience in two integrated schools in Northern Ireland and two bilingual/binational
schools in Israel. Through comparative analysis, and with reference to contact theory, it
illuminates some of the contextual and process variables that seemingly mediate the quality and
moderate the effectiveness of contact in each school setting.

Contact zone dynamics and the evolution of reproductive isolation in a North American treefrog, the spring peeper (Pseudacris crucifer)

Despite over seven decades of speciation research and 25 years of phylogeographic studies, a comprehensive understanding of mechanisms that generate biological species remains elusive. In temperate zones, the pervasiveness of range fragmentation and subsequent range expansions suggests that secondary contact between diverging lineages may be important in the evolution of species. Thus, such contact zones provide compelling opportunities to investigate evolutionary processes, particularly the roles of geographical isolation in initiating, and indirect selection against hybrids in completing (reinforcement), the evolution of reproductive isolation and speciation. The spring peeper (Pseudacris crucifer) has six well-supported mitochondrial lineages many of which are now in secondary contact. Here I investigate the evolutionary consequences of secondary contact of two such lineages (Eastern and Interior) in Southwestern Ontario using genetic, morphological, acoustical, experimental, and behavioural evidence to show accentuated divergence of the mate recognition system in sympatry. Mitochondrial and microsatellite data distinguish these two lineages but also show ongoing hybridization. Bayesian assignment tests and cline analysis imply asymmetrical introgression of Eastern lineage nuclear markers into Interior populations. Male calls are divergent between Eastern and Interior allopatric populations and show asymmetrical reproductive character displacement in sympatry. Female preference of pure lineage individuals is also exaggerated in sympatry, with hybrids showing intermediate traits and preference. I suggest that these patterns are most consistent with secondary reinforcement. I assessed levels of post-zygotic isolation between the Eastern and Interior lineages using a laboratory hybridization experiment. Hybrid tadpoles showed equal to or greater fitness than their pure lineage counterparts, but this may be countered through competition. More deformities and developmental anomalies in hybrid tadpoles further suggest post-zygotic isolation. Despite evidence for pre-mating isolation between the two lineages, isolation appears incomplete (i.e. hybridization is ongoing). I hypothesize that potentially less attractive hybrids may circumvent female choice by adopting satellite behaviour. Although mating tactics are related to body size, genetic status may play a role. I show that pure Eastern males almost always engage in calling, while hybrids adopt a satellite tactic. An absence of assortative mating, despite evidence of female preference, suggests successful satellite interception possibly facilitating introgression.

Intergroup contact, forgiveness, and experience of The Troubles in Northern Ireland

Two studies used random sample surveys to test the contact hypothesis on intergroup attitudes of Catholics and Protestants in Northern Ireland. In Study 1, archival data from two different surveys in 1989 (N= 310 Catholics, 422 Protestants) and 1991 (N= 319 Catholics, 478 Protestants) showed that contact was positively related to attitudes towards denominational mixing. Study 2 (N= 391 Catholics, 647 Protestants) explored predictors of intergroup forgiveness, and also showed that intergroup contact was positively related to out-group attitudes, perspective taking and trust (even among those who had worse experience of sectarian conflict). These studies indicate that research in peace psychology can provide a deeper understanding of the conflict in Northern Ireland and, in due course, contribute to its resolution.