A lesão de isquémia/reperfusão em transplante hepático: análise genética, morfológica e correlação clínica

RESUMO: O transplante hepático ortotópico é uma terapêutica aceite para casos selecionados de falência hepática terminal. O procedimento tem-­‐se aperfeiçoado, evidenciado pelo aumento da taxa de sobrevida de 30 para 75% aos 5 anos, mas cerca de 13 a 27% dos enxertos desenvolve falência primária (PNF) ou disfunção primária (DF) após o transplante. As consequências são devastadoras para a sobrevida do doente e do enxerto. A sua etiologia é multifactorial, incluindo factores relacionados com o dador e o receptor, tempos de isquémia, agressões cirúrgicas, bem como características anatomopatológicas do enxerto. A lesão de isquémia/reperfusão mantem-­‐se como um factor de risco intra operatório, com implicações directas sobre toda a evolução do transplante : existe uma relação íntima entre a PNF e a DF, a preservação do enxerto, a lesão de isquémia/reperfusão, e a falência do transplante. Além disso, está comprovada evidência que sugere que a lesão de I/R torna um aloenxerto mais vulnerável por aumento da imunogenicidade, aumentando a probabilidade de episódios de rejeição precoce e tardia. Com base na prática clínica quotidiana do CHBPT HCC, estudaram-­‐se 54 casos de transplante hepático, agrupados segundo grupos por alocação do enxerto respectivo: Grupo 1(n=27): dador cadáver para receptor cirrótico, Grupo 2 (n=15): dador cadáver para receptor PAF, Grupo 3 (n=12): dador PAF para receptor cirrótico. Observaram-­‐se as alterações histológicas e moleculares sobre o enxerto até ao final da operação do receptor, e as suas consequências clínicas,avaliando: -­‐ As diferentes capacidades de resistência e cada enxerto à lesão de isquémia/reperfusão. -­‐ As situações em que os factores do receptor se sobrepõem às do enxerto na definição do prognóstico, e vice versa. -­‐ A relevância das lesões histológicas e moleculares precoces no tecido hepático na evolução do enxerto e do receptor. Foram colhidas biópsias por agulha dos 54 enxertos hepáticos,42 provenientes de cadáver com coração batente(morte cerebral) e 12 provenientes de dador vivo com PAF, em três tempos diferentes do processo de colheita e transplante hepático: ­‐ A primeira(T0)antes da clampagem da aorta do dador -­‐ A segunda (T1) no final da isquémia fria -­‐ A terceira (T2) após a reperfusão do enxerto, durante o encerramento da parede abdominal. A estas amostras foi extraído RNA total, convertido em cDNA por transcrição reversa e feita a análise da expressão dos genes da CTLA4, IL-­‐1β, IL-­‐4, IL-­‐6, IL-­‐13, TNF-­‐α, Perforina, Selectina, (SELE), Fas-­‐ligando, Granzima-­‐B, Heme-­‐Oxigenase 1(HO1)e Óxido Nítrico Sintetase(iNOS2A)por PCR quantitativo segundo o método do Ct comparativo, utilizando como referência a expressão dos genes da amostra não-­‐isquémica –T0. Os fragmentos de todas as biópsias foram seccionados, para envio de amostra comparativa para processamento histológico habitual, sem qualquer alteração ao protocolo seguido habitualmente na Unidade de Transplantação do Hospital Curry Cabral. A presença de alguns parâmetros histológicos definidos, como esteatose, necrose, vacuolização, congestão sinusoidal e infiltração neutrofílica, foi registada e contabilizada numa classificação numérica. O seguimento clínico e laboratorial, bem como o acompanhamento de eventuais complicações, foi registado e correlacionado com os dados das colheitas de órgãos e com os dados das biópsias. Foram consideradas as seguintes variáveis, como as mais relevantes e objectivas para a interpretação da evolução clínica, tendo sido comparadas estatisticamente com os dados recolhidos, laboratoriais e clínicos: disfunção do enxerto, 207 pós operatórias, número de internamentos igual ou superior a 2 e rejeição crónica e/ou morte do receptor. Foram identificadas características clínicas menos favoráveis, a considerar, nalgumas circunstâncias: género feminino do receptor (sobretudo associado a enxerto masculino, p=0,077), isquémia fria superior a 500 minutos (p=0,074), isquémia quente superior a 90 minutos (p=0,099). Na análise laboratorial, distinguiram-­‐se duas características histológicas desfavoráveis e irreversíveis, como índice de mau prognóstico: a necrose e a balonização (p=0,029); no painel genético escolhido neste estudo,a expressão basal de IL-­‐1β(p=0,028), de SELE p=0,013)e de FAS-­‐L (p=0,079)relacionaram-­‐se com pior prognóstico. Algumas características protectoras intrínsecas dos enxertos só se revelaram indirectamente, como menor infiltração neutrofílica e maior expressão de HO1 e de iNOS nos enxertos PAF, não tendo sido possível provar uma interferência directa nos resultados clínicos. Não se obteve expressão mensurável de genes anti-­‐ inflamatórios nas biopsias hepáticas processadas neste estudo, como a IL13 e a I 4: assim, com a metodologia utilizada, não foi possível obter um perfil de expressão genética associado a boa evolução clínica. O perfil inverso foi sugerido apenas pela expressão basal dos 3 genes mencionados (FAS-­‐L,IL-­‐1β e SELE)no mesmo painel, com o protocolo seguido neste conjunto de 54 doentes. As características do receptor sobrepuseram-­‐se às do enxerto no caso de: -­‐ diagnóstico de PAF no receptor, que determinou uma maior predisposição para a disfunção do enxerto, o que, por sua vez, determina uma menor sobrevida. No entanto, o diagnóstico de PAF no receptor exibe uma curva de sobrevida mais favorável. -­‐ receptores com um baixo balanço de risco (BAR)definiram características favoráveis para enxertos com níveis baixos e moderados de esteatose, fazendo que esta característica, definida como um risco acrescido, não só não se manifestasse clinicamente,como parecesse um factor favorável. As características do enxerto sobrepuseram-­‐se às do receptor no caso de: -­‐ tempo de isquémia fria superior a 500 minutos -­‐ balonização, necrose, FAS-­‐L,IL-­‐1β e SELE em T0 A integração dos resultados moleculares e morfológicos com a evolução clínica, realça o papel da mobilização precoce de neutrófilos nos desempenhos menos favoráveis do enxerto hepático. -------------ABSTRACT: Orthotopic liver transplantation is na accepted therapeutic procedure for selected cases of terminal liver failure. The procedure has been improved, evidenced by the rise of survival rates from 30 to 70% at 5 years, but 13 to 27% of the liver grafts develops primary non function (PNF) or primary dysfunction (PDF) after transplantation. The consequences are devastating for the survival of the patient and of the graft. Its etiology is multifactorial, including factos related with the donor and with the recipient, ischemic times, surgical aggressions, as well as the histological characteristics of the graft. The ischemia/reperfusion lesion is still an intraoperative risk factor, with direct implications in the whole transplant outcome: there is a close interrelation between PNF and DF, graft preservation, ischemia / reperfusion lesion and graft failure. Beyond his, there is proved evidence that suggests that I/R lesion turns the allograft more vulnerable by increasing its immunogenity, increasing the probability of precocious and late rejection episodes. Based on the daily clinical practice at CHBPT /HCC, 54 cases of hepatic transplantation have been studied, grouped by allocation of each graft: Group (n=27):deceased do nortocirrhotic recipient, Group 2 (n=15): deceased donor to FAP recipient, Group 3 (n=12): FAP living donor to cirrhotic recipient. The histologic and molecular changes in the liver graft were observed until the end of the recipiente operation,together with its clinical consequences, evaluating:-­‐The different capacity of resistance of each graft to the ischemia / reperfusion lesion -­‐ The situations where the recipiente factos overlap the ones of the graft, in the definition of prognosis, and vice versa.-­‐ The relevance of the precocious histologic and molecular lesions of the hepatic tissue in the clinical outcome of the graft and the recipient. Needle biopsies were obtained from 54 liver grafts, 42 deceased brain dead donors and 12 from FAP living donors, at three diferente times of the harvesting and the hepatic transplantation: The first one (T0) before clamping the donor aorta -­‐ The second one (T2) in the end of cold ischemia time -­‐ The third one (T) after the reperfusion of the graft, during the closure of the abdominal wall. Total RNAwas extracted to these samples, converted to cDNA by reverse transcription and the analysis of gene expression was made for CTLA4,IL-­‐1β,IL-­‐4,IL-­‐6,IL-­‐13,TNF-­‐α,Perforin,E Selectin (SELE),Fas-­‐ligand,Granzyme-­‐B,Heme-­‐oxigenase 1 (HO1) and Nitric Oxide Sintetase (iNOS2A) by quantitative PCR, according with the Ct comparative method, using the expression of the non ischemic sample – T0. The fragments of all the biopsies were divided, to send a comparative sample to the usual histologic processement, keeping the same usual protocol at the Transplantation Unit of Curry Cabral Hospital. The presence of some defined histologic parameters, such as steatosis, necrosis, vacuolization, sinusoidal congestion and neutrophilic infiltration, was registered and catalogued in a numeric classification. The clinical and laboratory follow-­‐up, as well as the following of eventual complications, was registered and correlated with the data from organ procurement operations and with the data from the biopsies. The following variables were considered as the most relevant and objective ones, to the interpretation of the clinical evolution, being statistically compared with the clinical and laboratorial collected data: graft dysfunction, post-­‐operative complications, number of readmissions of 2 or more and chronic rejection and /or recipiente death. There were identified some unfavorable clinical characteristics, to be considered under certain circumstances: recipiente female gender (specially associated with malegraft, p=0,077), cold ischemia time of more than 500 minutes (p=0,074), warm ischemia time of more than 90 minutes (p=0,099). In the laboratory analysis, two histologic characteristics were identified as unfavorable and irreversible, associated with bad prognosis: necrosis and balonization (p=0,029); in the gene panel selected in this study, the basal expression of IL-­‐1β (p=0,028), SELE (p=0,013) and FAS-­‐L (p=0,079)were related with worse prognosis.Some intrinsic protective characteristics of the grafts were only indirectly revealed, such as less neutrophilic infiltration and bigger expression of HO1 and iNOS in FAP grafts, being impossible to prove any direct inte ference in the clinical results. A relevant and measurable expression of the anti inflammatory genes IL13 and IL4 was not obtained: with the used methodology, it was impossible to obtain a gene expression profile associated with a favorable clinical outcome.The inverse profile was suggested only by the basal expression of the three mentioned genes (FAS-­‐L, IL-­‐ 1β e SELE) in the same gene panel, according with the followed protocol in this group of 54 patients. The characteristics of the recipient overlapped those from the graft, in the case of :-­‐ FAP diagnosis in the recipient, which determined a bigger predisposition to graft dysfunction, which by itself determines a shorter survival. However, FAP diagnosis in the recipiente depicts a more favorable survival curve. -­‐ Recipients with a low balance risk índex (BAR) defined favorable characteristics to grafts with low and moderate grades of steatosis, making that this characteristic, associated with bad prognosis, looked like a favorable factor, and with no clinical interference. The graft characteristics overlapped those from the receptor in the case of: -­‐ Cold ischemic time more than 500 minutes -­‐ Balonization, necrosis, FAS-­‐L, IL-­‐1β and SELE at T0. The integration of molecular and morphologic results with the clinical evolution, stresses the role of a precocious neutrophils mobilization in the worse outcomes of liver grafts.

Social-media monitoring for cold-start recommendations

Generating personalized movie recommendations to users is a problem that most commonly relies on user-movie ratings. These ratings are generally used either to understand the user preferences or to recommend movies that users with similar rating patterns have rated highly. However, movie recommenders are often subject to the Cold-Start problem: new movies have not been rated by anyone, so, they will not be recommended to anyone; likewise, the preferences of new users who have not rated any movie cannot be learned. In parallel, Social-Media platforms, such as Twitter, collect great amounts of user feedback on movies, as these are very popular nowadays. This thesis proposes to explore feedback shared on Twitter to predict the popularity of new movies and show how it can be used to tackle the Cold-Start problem. It also proposes, at a finer grain, to explore the reputation of directors and actors on IMDb to tackle the Cold-Start problem. To assess these aspects, a Reputation-enhanced Recommendation Algorithm is implemented and evaluated on a crawled IMDb dataset with previous user ratings of old movies,together with Twitter data crawled from January 2014 to March 2014, to recommend 60 movies affected by the Cold-Start problem. Twitter revealed to be a strong reputation predictor, and the Reputation-enhanced Recommendation Algorithm improved over several baseline methods. Additionally, the algorithm also proved to be useful when recommending movies in an extreme Cold-Start scenario, where both new movies and users are affected by the Cold-Start problem.

Rifampicin fails to eradicate mature biofilm formed by methicillin-resistant Staphylococcus aureus

INTRODUCTION: Antimicrobial activity on biofilms depends on their molecular size, positive charges, permeability coefficient, and bactericidal activity. Vancomycin is the primary choice for methicillin-resistant Staphylococcus aureus (MRSA) infection treatment; rifampicin has interesting antibiofilm properties, but its effectivity remains poorly defined. METHODS: Rifampicin activity alone and in combination with vancomycin against biofilm-forming MRSA was investigated, using a twofold serial broth microtiter method, biofilm challenge, and bacterial count recovery. RESULTS: Minimal inhibitory concentration (MIC) and minimal bactericidal concentration for vancomycin and rifampicin ranged from 0.5 to 1mg/l and 0.008 to 4mg/l, and from 1 to 4mg/l and 0.06 to 32mg/l, respectively. Mature biofilms were submitted to rifampicin and vancomycin exposure, and minimum biofilm eradication concentration ranged from 64 to 32,000 folds and from 32 to 512 folds higher than those for planktonic cells, respectively. Vancomycin (15mg/l) in combination with rifampicin at 6 dilutions higher each isolate MIC did not reach in vitro biofilm eradication but showed biofilm inhibitory capacity (1.43 and 0.56log10 CFU/ml reduction for weak and strong biofilm producers, respectively; p<0.05). CONCLUSIONS: In our setting, rifampicin alone failed to effectively kill biofilm-forming MRSA, demonstrating stronger inability to eradicate mature biofilm compared with vancomycin.

Megabladder in experimental Chagas disease: pathological features of the bladder wall

Mega-organs, primarily in the digestive tract, are well known to occur in chronic Chagas disease. Acute experimental infection with Trypanosoma cruzi results in parasitism of a wide range of cells, tissues, and organs, including the urinary bladder. Infection of BALB/c mice with 100,000 bloodstream forms of the Y strain of T. cruzi induced acute infection with intense parasitism of all layers of the urinary bladder. Parasites were found in the mucosa, lamina propria, muscular, adventitial connective, and fat tissue. Desquamate epithelial cells with amastigotes in the bladder lumen were also found. After 60 days of infection, mice inoculated with 50 bloodstream forms developed dilated, thin-walled bladders that had inflammatory infiltrates and foci of fibrosis replacing areas of damaged muscular layer. These lesions result from direct damage to the muscle fibers by the T. cruzi, leading to myosites, muscle damage, and scarring. Direct damage of paraganglia cells secondary to parasitism, leading to dilatation, damage of muscle fibers, and scarring with replacement of muscular tissue with connective tissue, should also be considered as a cause of functional disturbance of the urinary bladder.

Study of the role of wall teichoic acids in the localization Staphylococcus aureus cell wall synthesis protein PBP4

The cell wall of Staphylococcus aureus is a highly complex network mainly composed of highly cross-linked peptidoglycan (PG) and teichoic acids (TAs), both important for the maintenance of the integrity and viability of bacteria. The penicillin binding proteins (PBPs), which catalyse the final stage of PG biosynthesis, are targets of β-lactam antibiotics and have been a key focus of antibacterial research. S. aureus has four native PBPs, PBP1-4 carried by both methicillin-sensitive (MSSA) and –resistant (MRSA) strains. PBP4 is required for the synthesis of the highly cross-linked PG and, as shown in recent studies, is essential for the expression of β-lactam resistance in community-acquired strains (CA-MRSA). This protein has a septal localization that seems to be spatially and temporally regulated by an unknown intermediate of the wall teichoic acids (WTA) biosynthesis pathway. Therefore, if WTA synthesis is compromised, PBP4 becomes dispersed throughout the entire cell membrane. The aim of this project was to identify the WTA precursor responsible for the septal recruitment of PBP4. In order to do so, inducible mutants of tarB and tarL genes in the background of NCTCPBP4-YFP were constructed allowing for the study of PBP4 localization in the presence and absence of these specific tar genes.With this work we were able to show that the absence of TarB or TarL leads to the delocalization of PBP4, indicating that TarL or a protein/WTA precursor whose localization/synthesis is dependent on TarL is responsible for the recruitment of PBP4.

The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres toward the active crack plane are significantly important in order to maximize its benefits. Therefore, in this study, the effect of the fibre distribution and orientation on the post-cracking tensile behaviour of the steel fibre reinforced self-compacting concrete (SFRSCC) specimens is investigated. For this purpose, several cores were extracted from distinct locations of a panel and were subjected to indirect (splitting) and direct tensile tests. The local stress-crack opening relationship (σ-w) was obtained by modelling the splitting tensile test under the finite element framework and by performing an Inverse Analysis (IA) procedure. Afterwards the σ-w law obtained from IA is then compared with the one ascertained directly from the uniaxial tensile tests. Finally, the fibre distribution/orientation parameters were determined adopting an image analysis technique.

Self-monitoring of freeze–thaw damage using triphasic electric conductive concrete

The effect of freeze–thaw cycles on concrete is of great importance for durability evaluation of concrete structures in cold regions. In this paper, damage accumulation was studied by following the fractional change of impedance (FCI) with number of freeze–thaw cycles (N). The nano-carbon black (NCB), carbon fiber (CF) and steel fiber (SF) were added to plain concrete to produce the triphasic electrical conductive (TEC) and ductile concrete. The effects of NCB, CF and SF on the compressive strength, flexural properties, electrical impedance were investigated. The concrete beams with different dosages of conductive materials were studied for FCI, N and mass loss (ML), the relationship between FCI and N of conductive concrete can be well defined by a first order exponential decay curve. It is noted that this nondestructive and sensitive real-time testing method is meaningful for evaluating of freeze–thaw damage in concrete.

Produtos têxteis inteligentes incorporando filamentos compósitos com nanotubos de carbono

Programa Doutoral em Engenharia Têxtil.

Development of sandwich panels of customized functionalities for the rehabilitation of the built patrimony

Considering that the future of the construction sector in most European countries will mainly lie in the renovation of the existing building stock, in the next coming years thousands of energy inefficient buildings will need renovation to force EU member states to reach the EU 2020 targets and implement the Energy Performance of Buildings Directive (EPBD). Seeing the actual crisis in the construction sector as an opportunity, this work aims to develop a concept for prefabricated customizable sandwich panels for the multifunctional renovation of buildings, focusing also on technological innovation. More than a conventional solution, this proposal aims to combine sustainable and recycled building materials, available technologies and systems with advanced design and manufacturing tools within an integrated and mass-customizable approach of advanced building renovation prefabricated solutions. The adoption of these new proposed solutions would improve the living standards of the inhabitants of our cities, reducing energy inefficiency and other existing construction/renovation problems, while enabling some advanced features like the incorporation of technical modules that could even monitor the building performance during its full lifetime and the living conditions of its occupants.

Affordable prefabricated modular houses using cement and polymer based materials and advanced design tools

By taking advantage of the appropriate use of cement and polymer based materials and advanced computational tools, a pre-fabricated affordable house was built in a modular system. Modular system refers to the complete structure that is built-up by assembling pre-fabricated sandwich panels composed of steel fibre reinforced self-compacting concrete (SFRSCC) outer layers that are connected by innovative glass fibre reinforced polymer (GFRP) connectors, resulting in a panel with adequate structural, acoustic, and thermal insulation properties. The modular house was prepared for a typical family of six members, but its living area can be easily increased by assembling other pre-fabricated elements. The speed of construction and the cost of the constructive elements make these houses competitive when compared to traditional solutions. In this paper the relevant research subjacent to this project (LEGOUSE) is briefly described, as well as the construction process of the built real scale prototype.

Tensile stress–crack width law for steel fibre reinforced self-compacting concrete obtained from indirect (splitting) tensile tests

In this work, the fracture mode I parameters of steel fibre reinforced self-compacting concrete (SFRSCC) were derived from the numerical simulation of indirect splitting tensile tests. The combined experimental and numerical research allowed a comparison between the stress-crack width (σ - w) relationship acquired straightforwardly from direct tensile tests, and the σ - w response derived from inverse analysis of the splitting tensile tests results. For this purpose a comprehensive nonlinear 3D finite element (FE) modeling strategy was developed. A comparison between the experimental results obtained from splitting tensile tests and the corresponding FE simulations confirmed the good accuracy of the proposed strategy to derive the σ – w for these composites. It is concluded that the post-cracking tensile laws obtained from inverse analysis provided a close relationship with the ones obtained from the experimental uniaxial tensile tests.

Assessment of the performance of steel fibre reinforced self-compacting concrete in elevated slabs

The reinforcement mechanisms at the cross section level assured by fibres bridging the cracks in steel fibre reinforced self-compacting concrete (SFRSCC) can be significantly amplified at structural level when the SFRSCC is applied in structures with high support redundancy, such is the case of elevated slab systems. To evaluate the potentialities of SFRSCC as the fundamental material of elevated slab systems, a ¼ scale SFRSCC prototype of a residential building was designed, built and tested. The extensive experimental program includes material tests for characterizing the relevant properties of SFRSCC, as well as structural tests for assessing the performance of the prototype at serviceability and ultimate limit conditions. Three distinct approaches where adopted to derive the constitutive laws of the SFRSCC in tension that were used in finite element material nonlinear analysis to evaluate the reliability of these approaches in the prediction of the load carrying capacity of the prototype.

Analytical approach for the flexural analysis of RC beams strengthened with prestressed CFRP

The objective of this paper is to propose a simplified analytical approach to predict the flexural behavior of simply supported reinforced-concrete (RC) beams flexurally strengthened with prestressed carbon fiber reinforced polymer (CFRP) reinforcements using either externally bonded reinforcing (EBR) or near surface mounted (NSM) techniques. This design methodology also considers the ultimate flexural capacity of NSM CFRP strengthened beams when concrete cover delamination is the governing failure mode. A moment–curvature (M–χ) relationship formed by three linear branches corresponding to the precracking, postcracking, and postyielding stages is established by considering the four critical M–χ points that characterize the flexural behavior of CFRP strengthened beams. Two additional M–χ points, namely, concrete decompression and steel decompression, are also defined to assess the initial effects of the prestress force applied by the FRP reinforcement. The mid-span deflection of the beams is predicted based on the curvature approach, assuming a linear curvature variation between the critical points along the beam length. The good predictive performance of the analytical model is appraised by simulating the force–deflection response registered in experimental programs composed of RC beams strengthened with prestressed NSM CFRP reinforcements.

Recycled steel fibre reinforced concrete failing in bending and in shear

Recent research is showing that the addition of Recycled Steel Fibres (RSF) from wasted tyres can decrease significantly the brittle behaviour of cement based materials, by improving its toughness and post-cracking resistance. In this sense, Recycled Steel Fibre Reinforced Concrete (RSFRC) seems to have the potential to constitute a sustainable material for structural and non-structural applications. To assess this potential, experimental and numerical research was performed on the use of RSFRC in elements failing in bending and in beams failing in shear. The values of the fracture mode I parameters of the developed RSFRC were determined by performing inverse analysis with test results obtained in three point notched beam bending tests. To assess the possibility of using RSF as shear reinforcement in Reinforced Concrete (RC) beams, three point bending tests were executed with three series of RSFRC beams flexurally reinforced with a relatively high reinforcement ratio of longitudinal steel bars in order to assure shear failure for all the tested beams. By performing material nonlinear simulations with a computer program based on the finite element method (FEM), the applicability of the fracture mode I crack constitutive law derived from the inverse analysis is assessed for the prediction of the behaviour of these beams. The performance of the formulation proposed by RILEM TC 162 TDF and CEB-FIP 2010 for the prediction of the shear resistance of fibre reinforced concrete elements was also evaluated.

Embedded Through-Section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups

The Embedded Through-Section (ETS) technique is a promising technique for the shear strengthening of existing (RC) elements. According to this technique, holes are drilled through the beam section, and bars of steel or FRP material are introduced into these holes and bonded to the concrete with adhesive materials. An experimental program was carried out with RC T-cross section beams strengthened in shear using the ETS steel bars and ETS CFRP rods. The research is focused on the evaluation of the ETS efficiency on beams with different percentage of existing internal transverse reinforcement (ρsw=0.0%, ρsw=0.1% and ρsw=0.17%). The effectiveness of different ETS strengthening configurations was also investigated. The good bond between the strengthening ETS bars and the surrounding concrete allowed the yield initiation of the ETS steel bars and the attainment of high tensile strains in the ETS CFPR rods, leading to significant increase of shear capacity, whose level was strongly influenced by the inclination of the ETS bars and the percentage of internal transverse reinforcement.