Appendix 1: List of cladistic characters published on ammonites

The file here provided, is the list of all characters that have been used in cladistic analysis on ammonoids published so far. It constitutes the base of a study which investigates practices in characters establishment. Find here after the abstract of the article that is associated to this file. Cladistics appears as one of the most useful method to reconstruct phylogeny of fossil taxa. However, ammonoids workers tend to sulk this method. The capital step of cladistic analysis is the recognition of homology hypothesis as clue to reconstruct monophyletic clades based on the sharing of derived traits. Previous authors have suggested that coding schemes are usually direct transcription of original taxa description. However, establishing a list of characters (i.e. a matrix taxa /characters) is a very different work compared to a compilation of diagnoses. How morphology is coded in ammonoids? How coding schemes are influenced by traditional descriptions / characters? Here, we review all cladistic analyses of ammonoids published in the literature to compare characters and the way authors have dealt with the treatment of continuous characters, polymorphism and ontogeny. Several barriers are usually invoked to justify that cladistics cannot be applied to reconstruct ammonoids phylogenies. We show that an appropriate use of improvements both on ammonoids' knowledge and cladistics methodology may overcome limitations usually invoked to perform cladistic analysis on ammonoids.

Distribution of foraminifera and other components in ODP Leg 188 sites

During Leg 188 of the Ocean Drilling Program (ODP), employing JOIDES Resolution, we drilled holes at three sites in the southern Indian Ocean in and near Prydz Bay, East Antarctica, between 28 January and 29 February 2000. The objectives of the voyage were to: - Core through sediments deposited when Antarctica underwent the transition from "greenhouse" to the modern "icehouse" state late in the Eocene or early in the Oligocene, at sites obtaining their sediment from the currently subglacial Gamburtsev Mountains that probably were the site of nucleation of the ice sheet (principally Site 1166); - Obtain a sediment record from times at which major changes in the ice sheet volume and characteristics took place as judged from oxygen isotope records, especially at ~23.7 Ma (Oligocene/Miocene boundary), 12-16 Ma (middle Miocene), and 2.7 Ma (late Pliocene) (mainly Site 1165); and - Sample through the upper Pliocene and Quaternary in an attempt to document fluctuations in the extent of the ice sheet over the continental shelf during the Quaternary (especially Site 1167). Paleogene foraminifer-bearing marine sections were not intersected, and thus discussion of marine sections is restricted to the Neogene. Foraminifers are not major contributors to Leg 188 chronostratigraphy but contribute to paleoenvironmental interpretation, to issues such as carbonate compensation depth (CCD) effects and source and history of sediment, and provide a basis for Sr and d18O studies. Chronostratigraphy for the various sections was compiled from diatoms, radiolarians, and paleomagnetism (Shipboard Scientific Party, 2001, doi:10.2973/odp.proc.ir.188.101.2001). Foraminifers were sporadic rather than continuous except in short intervals; however, the Neogene foraminifers from the region are very poorly known and the new records proved to be of significant value in paleoenvironmental interpretation. Only at Site 1167 did drilling intersect a section that yielded foraminifers virtually throughout. Other than for the very young section at each site, there is virtually no continuity of assemblages between sites and thus each section is treated here as separate and unrelated.

(Table 2) Properties of relict ice and sand wedges from six sites near Rio Gallegos, southern Patagonia

Relict sand wedges are ubiquitous in southern Patagonia. At six sites we conducted detailed investigations of stratigraphy, soils, and wedge frequency and characteristics. Some sections contain four or more buried horizons with casts. The cryogenic features are dominantly relict sand wedges with an average depth, maximum apparent width, minimum apparent width, and H/W of 78, 39, 3.8, and 2.9 cm, respectively. The host materials are fine-textured (silt loam, silty clay loam, clay loam) till and the infillings are aeolian sand. The soils are primarily Calciargidic Argixerolls that bear a legacy of climate change. Whereas the sand wedges formed during very cold (-4 to -8 °C or colder) and dry (ca. <=100 mm precipitation/yr) glacial periods, petrocalcic horizons from calcium carbonate contributed by dustfall formed during warmer (7 °C or warmer) and moister (>= 250 mm/yr) interglacial periods. The paleo-argillic (Bt) horizons reflect unusually moist interglacial events where the mean annual precipitation may have been 400 mm/yr. Permafrost was nearly continuous in southern Patagonia during the Illinoian glacial stage (ca. 200 ka), the early to mid-Pleistocene (ca. 800-500 ka), and on two occasions during the early Pleistocene (ca. 1.0-1.1 Ma).

Adjustment methods of national input-output tables for harmonized and consistent multi-regional input-output databases

Despite the fact that input–output (IO) tables form a central part of the System of National Accounts, each individual country's national IO table exhibits more or less different features and characteristics, reflecting the country's socioeconomic idiosyncrasies. Consequently, the compilers of a multi-regional input–output table (MRIOT) are advised to thoroughly examine the conceptual as well as methodological differences among countries in the estimation of basic statistics for national IO tables and, if necessary, to carry out pre-adjustment of these tables into a common format prior to the MRIOT compilation. The objective of this study is to provide a practical guide for harmonizing national IO tables to construct a consistent MRIOT, referring to the adjustment practices used by the Institute of Developing Economies, JETRO (IDE-JETRO) in compiling the Asian International Input–Output Table.

Offshore Wind Farms: Foundations and influence on the Littoral Processes

Offshore wind farms are beginning to form part of coastal and marine landscapes located in dynamic surroundings. An integral management model must therefore be applied to achieve not only technical and economic viability of the project but also respect for the environment. Amongst other aspects, the latter calls for an analysis of the possible impact these facilities may have on littoral processes and this requires the differences between littoral processes prior and subsequent to the facility’s construction to be known. The maritime climate, the composition of the coast, lay-out distribution and characteristics of the facility’s components need to be known, particularly foundations as they are the main obstacles waves and currents meet. This article first addresses different aspects related to an offshore wind farm’s influence on the analysis of how it affects littoral dynamics and, because of their importance in this study, pays special attention to foundations. Coastal erosion due to this type of facility is then examined. The main conclusion of this article is that, whilst there are certain opinions claiming the coast is not affected by the presence of this kind of facility since the distance from location to coast and between wind turbine generators themselves is long, the impact must be analysed in each specific case, at least until experience proves otherwise and criteria are adopted in this respect.

Some techniques for automated, resource-aware distributed and mobile computing in a multi-paradigm programming system

Distributed parallel execution systems speed up applications by splitting tasks into processes whose execution is assigned to different receiving nodes in a high-bandwidth network. On the distributing side, a fundamental problem is grouping and scheduling such tasks such that each one involves sufñcient computational cost when compared to the task creation and communication costs and other such practical overheads. On the receiving side, an important issue is to have some assurance of the correctness and characteristics of the code received and also of the kind of load the particular task is going to pose, which can be specified by means of certificates. In this paper we present in a tutorial way a number of general solutions to these problems, and illustrate them through their implementation in the Ciao multi-paradigm language and program development environment. This system includes facilities for parallel and distributed execution, an assertion language for specifying complex programs properties (including safety and resource-related properties), and compile-time and run-time tools for performing automated parallelization and resource control, as well as certification of programs with resource consumption assurances and efñcient checking of such certificates.

Dynamic Response Optimization of Vehicles through Efficient Multibody Formulations and Automatic Differentiation Techniques

El diseño y desarrollo de sistemas de suspensión para vehículos se basa cada día más en el diseño por ordenador y en herramientas de análisis por ordenador, las cuales permiten anticipar problemas y resolverlos por adelantado. El comportamiento y las características dinámicas se calculan con precisión, bajo coste, y recursos y tiempos de cálculo reducidos. Sin embargo, existe una componente iterativa en el proceso, que requiere la definición manual de diseños a través de técnicas “prueba y error”. Esta Tesis da un paso hacia el desarrollo de un entorno de simulación eficiente capaz de simular, analizar y evaluar diseños de suspensiones vehiculares, y de mejorarlos hacia la solución optima mediante la modificación de los parámetros de diseño. La modelización mediante sistemas multicuerpo se utiliza aquí para desarrollar un modelo de autocar con 18 grados de libertad, de manera detallada y eficiente. La geometría y demás características de la suspensión se ajustan a las del vehículo real, así como los demás parámetros del modelo. Para simular la dinámica vehicular, se utiliza una formulación multicuerpo moderna y eficiente basada en las ecuaciones de Maggi, a la que se ha incorporado un visor 3D. Así, se consigue simular maniobras vehiculares en tiempos inferiores al tiempo real. Una vez que la dinámica está disponible, los análisis de sensibilidad son cruciales para una optimización robusta y eficiente. Para ello, se presenta una técnica matemática que permite derivar las variables dinámicas dentro de la formulación, de forma algorítmica, general, con la precisión de la maquina, y razonablemente eficiente: la diferenciación automática. Este método propaga las derivadas con respecto a las variables de diseño a través del código informático y con poca intervención del usuario. En contraste con otros enfoques en la bibliografía, generalmente particulares y limitados, se realiza una comparación de librerías, se desarrolla una formulación híbrida directa-automática para el cálculo de sensibilidades, y se presentan varios ejemplos reales. Finalmente, se lleva a cabo la optimización de la respuesta dinámica del vehículo citado. Se analizan cuatro tipos distintos de optimización: identificación de parámetros, optimización de la maniobrabilidad, optimización del confort y optimización multi-objetivo, todos ellos aplicados al diseño del autocar. Además de resultados analíticos y gráficos, se incluyen algunas consideraciones acerca de la eficiencia. En resumen, se mejora el comportamiento dinámico de vehículos por medio de modelos multicuerpo y de técnicas de diferenciación automática y optimización avanzadas, posibilitando un ajuste automático, preciso y eficiente de los parámetros de diseño. ABSTRACT Each day, the design and development of vehicle suspension systems relies more on computer-aided design and computer-aided engineering tools, which allow anticipating the problems and solving them ahead of time. Dynamic behavior and characteristics are thus simulated accurately and inexpensively with moderate computational times and resources. There is, however, an iterative component in the process, which involves the manual definition of designs in a trialand-error manner. This Thesis takes a step towards the development of an efficient simulation framework capable of simulating, analyzing and evaluating vehicle suspension designs, and automatically improving them by varying the design parameters towards the optimal solution. The multibody systems approach is hereby used to model a three-dimensional 18-degrees-of-freedom coach in a comprehensive yet efficient way. The suspension geometry and characteristics resemble the ones from the real vehicle, as do the rest of vehicle parameters. In order to simulate vehicle dynamics, an efficient, state-of-the-art multibody formulation based on Maggi’s equations is employed, and a three-dimensional graphics viewer is developed. As a result, vehicle maneuvers can be simulated faster than real-time. Once the dynamics are ready, a sensitivity analysis is crucial for a robust optimization. To that end, a mathematical technique is introduced, which allows differentiating the dynamic variables within the multibody formulation in a general, algorithmic, accurate to machine precision, and reasonably efficient way: automatic differentiation. This method propagates the derivatives with respect to the design parameters throughout the computer code, with little user interaction. In contrast with other attempts in the literature, mostly not generalpurpose, a benchmarking of libraries is carried out, a hybrid direct-automatic differentiation approach for the computation of sensitivities is developed, and several real-life examples are analyzed. Finally, a design optimization process of the aforementioned vehicle is carried out. Four different types of dynamic response optimization are presented: parameter identification, handling optimization, ride comfort optimization and multi-objective optimization; all of which are applied to the design of the coach example. Together with analytical and visual proof of the results, efficiency considerations are made. In summary, the dynamic behavior of vehicles is improved by using the multibody systems approach, along with advanced differentiation and optimization techniques, enabling an automatic, accurate and efficient tuning of design parameters.

Identificación de áreas prioritarias para la conservación de razas de maíz en la sierra de Ecuador

En Ecuador el maíz es el cultivo más importante en superficie y es base de la alimentación para la población rural que vive en los Andes. A diferencia de lo que sucede en la Costa, en la región Sierra todavía se cultivan numerosas variedades tradicionales que se agrupan en veinticuatro razas. Mantener esta diversidad es, pues, de gran importancia no solo para la seguridad alimentaria, sino también como fuente de genes para tolerancia a factores abióticos que podrían ser incorporados a las variedades modernas. Si bien parte de esta diversidad fue recolectada a mediados del siglo pasado y está siendo conservada en distintos bancos de germoplasma, es deseable que su conservación in situ también esté asegurada, entre otras razones, porque de esta manera el cultivo puede seguir evolucionando. Para poder implementar un plan de conservación en finca que contribuya a preservar este patrimonio, resulta imprescindible identificar áreas idóneas donde concentrar los recursos y conocer las características y tipologías de los agricultores que manejan la diversidad actual. Generar esta información es el objetivo principal de esta investigación y para lograrlo se han llevado a cabo cuatro estudios: (1) Análisis de la diversidad a nivel de razas e identificación de áreas de alta riqueza de razas, alta diversidad morfológica y/o alta diversidad ecogeográfica en la Sierra de Ecuador, (2) Identificación del perfil y las características de los agricultores que conservan y manejan las variedades tradicionales de maíz en la Sierra de Ecuador, (3) Análisis del conocimiento local, manejo y usos de variedades tradicionales de maíz en la Sierra de Ecuador, y (4) Identificación de áreas de alta diversidad y bajo riesgo de pérdida para la conservación en finca de maíz en la Sierra de Ecuador. Para el primer estudio se visitaron 303 fincas distribuidas a lo largo de la Sierra y se recolectaron 636 muestras que fueron caracterizadas morfológicamente mediante 14 variables: 8 relacionadas con la mazorca (forma, longitud y diámetro de la mazorca, color y diámetro de olote y número y disposición de hileras) y 7 referidas el grano (número total de granos, color, forma, longitud, anchura y grosor de grano y tipo de endospermo). Adicionalmente, las fincas donde se tomaron las muestras fueron caracterizadas ecogeográficamente mediante 5 variables climáticas (temperatura media estacional, rango de temperatura media anual, temperatura mínima de diciembre, precipitación estacional y precipitación de octubre), 2 geofísicas (altitud y pendiente) y 5 edáficas (textura principal del suelo, profundidad a roca, pH, contenido en materia orgánica y fertilidad). A partir de esta información y mediante técnicas de sistemas de información geográfica (SIG), se generaron mapas de distribución por raza en formato vectorial y un mapa de riqueza de razas, un mapa de diversidad morfológica y un mapa de diversidad ecogeográfica en formato ráster con celdas de 10 km x 10 km. Los resultados permitieron constatar que, en los últimos 60 años, no se ha perdido ninguna raza. Sin embargo, Canguil, Chaucho y Clavito han dejado de cultivarse en algunas provincias con la consiguiente erosión genética del cultivo. La caracterización morfológica detectó diferencias en el grado de variabilidad intra-raza, siendo Patillo Ecuatoriano, Racimo de Uva y Uchima las razas más heterogéneas tanto para los caracteres cualitativos como cuantitativos. A nivel climático y geofísico, también se detectaron diferencias en el grado de variación intra-raza; Cuzco Ecuatoriano, Kcello Ecuatoriano y Montaña Ecuatoriana fueron las razas que en promedio presentaron mayores rangos y coeficientes de variación para estas variables ecogeográficas. En cuanto a las condiciones edáficas todas las razas, excepto Cónico Dentado, presentaron una gran heterogeneidad, pudiendo crecer tanto en suelos ricos como pobres, con valores de pH entre ácido y moderadamente alcalino. La comparación entre razas reveló diferencias significativas en los rangos ambientales de algunas razas como Cónico Dentado, que tiende a cultivarse a menor altitud y, por tanto, en ambientes menos fríos y de mayor precipitación que Blanco Blandito, Patillo Ecuatoriano, Sabanero Ecuatoriano, Uchima y Zhima. Para la mayoría de las razas se encontraron materiales potencialmente adaptados a condiciones de estrés (precipitación estacional inferior a 500 mm y suelos con pH entre 4.5 y 5.5). Finalmente, los mapas de riqueza, de diversidad morfológica y de diversidad ecogeográfica mostraron 36 celdas de alta diversidad repartidas en las 10 provincias de la Sierra: 11 celdas en las provincias del norte, 11 en las provincias del centro y 14 en las provincias del sur. Para la caracterización e identificación de las tipologías de los agricultores que cultivan maíz en la Sierra de Ecuador y el análisis de los posibles factores de riesgo de pérdida de diversidad, se realizaron entrevistas individuales y semiestructuradas a los agricultores dueños de las fincas donde se recolectaron las muestras para el estudio de diversidad (254 en total). Las preguntas que se formularon (11 abiertas y 5 cerradas) estuvieron organizadas en seis bloques: datos del agricultor, características de la finca, diversidad y conocimiento del cultivo, manejo del cultivo, usos y flujo de semillas. Los resultados indicaron que la diversidad de maíz que hay en la Sierra de Ecuador es manejada mayoritariamente por agricultores mestizos, de entre 30 y 55 años, que cultivan una o dos variedades tradicionales para autoconsumo, en parcelas de menos de 0.5 ha y en asocio con fréjol. El análisis de segmentación mediante el algoritmo Chi-square automatic interaction detection (CHAID) permitió identificar un pequeño grupo de agricultores indígenas con parcelas medianas (entre 0.5 ha y 1.5 ha) que conservan un mayor número de variedades tradicionales por finca que el agricultor promedio. Los análisis estadísticos no detectaron diferencias significativas entre etnias (mestizo vs. indígena), géneros (hombre vs. mujer) y grupos de edad (jóvenes menores de 30 años, adultos entre 30 y 55 años y adultos mayores de 55 años) en lo que respecta al conocimiento del cultivo (criterios de reconocimiento y razones de preferencia) y manejo (tipo de cultivo), pero sí detectaron diferencias entre regiones, principalmente en el modo de cultivar el maíz; mientras que en el norte y sur tienden a sembrarlo en asocio y con un mayor número de especies, en el centro acostumbran a cultivarlo preferentemente solo. En cuanto a los usos, se recopilaron hasta 39 modos diferentes de consumir maíz, siendo Kcello Ecuatoriano y Zhima las razas para las que se registró un mayor número de usos. La comparación del número medio de usos por variedad entre etnias evidenció que los agricultores mestizos utilizan sus variedades tradicionales de forma más variada que los indígenas. Entre los factores de riesgo que se analizaron, el bajo porcentaje de jóvenes agricultores que se ocupan de las fincas podría suponer una amenaza a medio plazo por falta de relevo generacional. Adicionalmente, las numerosas sinonimias y homonimias que se detectaron y el bajo intercambio de semillas también podrían ser causa de pérdida de diversidad, bien por reemplazo o por envejecimiento de la semilla. Finalmente, se concluyó que las razas Chaucho, Complejo Chillo-Huandango, Complejo Mishca-Huandango, Cónico Dentado, Montaña Ecuatoriana y Sabanero Ecuatoriano son particularmente vulnerables, no solo por su baja presencia, sino también por el color de grano que tienen (los mismos que la mayoría de las razas más comunes) y carecer de nombres y usos específicos. Finalmente, para la priorización de áreas de conservación en finca para maíz en la Sierra de Ecuador, se utilizaron 13 criterios de diferente naturaleza: 2 ecogeográficos (precipitación, diversidad ecogeográfica), 6 biológicos (grado de presencia del cultivo, riqueza de razas, diversidad morfológica, presencia de mezclas, presencia de razas locales y riesgo de erosión genética), 3 culturales (abundancia de variedades por finca, diversidad de usos y frecuencia de intercambio) y 2 demográficos (tamaño de la población y distancia a núcleos urbanos). Mediante técnicas SIG y de evaluación multicriterio, los valores originales de las capas-criterio fueron transformados a una escala de 0 a 100. Posteriormente, las capas-criterio normalizadas fueron sumadas utilizando tres métodos de ponderación: (1) mismo peso, (2) diferente peso según la puntuación otorgada por 72 expertos, y (3) diferente peso según el método de comparación entre pares de criterios. Los resultados permitieron identificar ocho celdas de 10 km x 10 km con alta puntuación (> 65): tres celdas en el norte (una en cada una de las provincias), una celda en el centro (en la provincia de Cotopaxi), y cuatro celdas en la región sur (dos en Azuay y otras dos en Loja). ABSTRACT In Ecuador, the maize is the most important cultivation in surface and it is a base of the feeding for the rural population who lives in the Andes. In contrast to what it happens on the Coast, in the Sierra region still there are cultivated numerous traditional varieties that are grouped into twenty-four races. Maintaining this diversity is, therefore, of great importance not only for food security, but also as a source of genes for tolerance to abiotic factors could be incorporated into modern varieties. Although part of this diversity was collected in the middle of the last century and is still preserved in various germplasm banks, it is desirable for the in situ conservation also is assured, among other reasons, because in this way the crop can continue to evolve. To be able to implement a conservation plan on farm that contribute to preserving this heritage, it is essential to identify suitable areas where to concentrate resources and know the characteristics and typology of farmer who managed the current diversity. To generate this information is the main target of this investigation and to achieve this, four studies have been carried out: (1) Analysis of the diversity at races and identification of areas of high richness of races, high morphological diversity and / or ecogeographical high diversity in the Sierra of Ecuador, (2) Identification of the profile and characteristics of farmers who conserve and manage traditional varieties of maize in the Sierra of Ecuador, (3) Analysis of local knowledge, management and use of traditional varieties of maize in the Sierra of Ecuador, and (4) Identification of areas of high diversity and low risk of loss for the conservation of maize in the Sierra of Ecuador. For the first study were visited 303 farms distributed along the Sierra and collected 636 samples that were characterized morphologically by 14 variables: 8 related to the ear (shape, length and diameter of the cob, colour, and diameter of cob and number and arrangement of rows) and 7 referred to the grain (total number of grain, colour, shape, length, width, and thickness and type of grain endosperm). In addition, the farms where the samples were taken were characterized ecogeographically through 5 climatic variables (seasonal average temperature, range of average annual temperature, minimum temperature for December, seasonal precipitation and precipitation of October), 2 geophysical (altitude and slope) and edaphic 5 (main texture of the soil, deep rock, pH, content of organic matter and fertility). From this information and techniques of geographic information systems (GIS), maps were generated for distribution by race in vector format and a map of richness of races, a map of morphological diversity and a map of ecogeographical diversity in raster format with cells of 10 km x 10 km. The results allowed observing that, over the past 60 years, it has not lost any race. Nevertheless, Canguil, Chaucho and Clavito have stopped being cultivated in some provinces with the consequent genetic erosion of the cultivation. The morphological characterization detected differences in the degree of variability intra-race, being Patillo Ecuatoriano, Racimo de Uva and Uchima races more heterogeneous both for the qualitative and quantitative characters. At climate and geophysical level, also detected differences in the degree of variation intra-race; Cuzco Ecuatoriano, Kcello Ecuatoriano and Montaña Ecuatoriana were races that, on average, showed higher ranges and coefficients of variation for these geographical characters. In terms of the edaphic conditions, all races, except Cónico Dentado, showed a great heterogeneity, and can grow both in rich and poor soils, with pH values between acid and moderately alkaline. The comparison between races revealed significant differences in the environmental ranges in some races as Cónico Dentado, which tends to be grown at lower elevations and, therefore, in environments less cold and greater precipitation than Blanco Blandito, Patillo Ecuatoriano, Sabanero Ecuatoriano, Uchima and Zhima. For most of the races were found materials potentially adapted to stress conditions (seasonal precipitation less than 500 mm and soil with a pH between 4.5 and 5.5). Finally, the maps of richness, morphologic diversity and ecogeographical diversity showed 36 cells high diversity distributed in 10 provinces of the Sierra: 11 cells in the northern provinces, 11 in the central provinces and 14 in the southern provinces. For the characterization and identification of the typology of the farmers who cultivate corn in the Sierra of Ecuador and the analysis of the possible factors of risk of loss of diversity, there were realized interviews individual and semistructured to the farmers’ owners of the farms where the samples were gathered for the study of diversity (254 in whole). The questions that were formulated (11 opened ones and 5 closed ones) were organized in six blocks: data of the farmer, characteristics of the farm, diversity and knowledge of the crop, crop management, uses and seed flow. The results indicated that the maize diversity that exist in the Sierra of Ecuador is managed mainly by mestizo farmers, aged between 30 and 55, who cultivate one or two traditional varieties for self-consumption, on plots of less than 0.5 has and in associated with beans. The segmentation analysis algorithm using the Chi-square automatic interaction detection (CHAID technique), allowed to identify a small group of indigenous farmers with medium-sized plots (between 0.5 there is and 1.5 it is) that a major number of traditional varieties preserves for farm that the average farmer. The statistical analysis did not detect significant differences between ethnic groups (mestizos vs. indigenous), genres (man vs. women) and age groups (young people under 30 years of age, adults between 30 and 55 years and adults over 55 years old) in regards to the knowledge of the cultivation (recognition criteria and reasons of preference) and management (type of crop), but if detected differences between regions, mainly on the mode of cultivating the maize; while in the north and south they tend to sow in associate and with a greater number of species, in the center accustomed to cultivate it preferably only. In regards to the uses, they were compiled up to 39 different ways of consuming maize, being Kcello Ecuatoriano and Zhima the races for which a major number of uses registered. The comparison of the average number of uses per variety between ethnic groups showed that the mestizo farmers used their traditional varieties of form more varied than the indigenous people. Between the factors of risk that were analyzed, the low percentage of young farmers who deal with the farms might suppose a medium-term threat for lack of generational relief. In addition, the numerous synonyms and homonyms that were detected and the low seed exchange could also be a cause of loss of diversity, either by replacement or by aging of the seed. Finally, it was concluded that the races Chaucho, Complex Chillo-Huandango, Complex Mishca-Huandango, Cónico Dentado, Montaña Ecuatoriana and Sabanero Ecuatoriano are particularly vulnerable, not only because of their low presence, but also by the grain color they have (the same as the majority of races more common) and lack of names and specific uses. Finally, for the prioritization of maize conservation areas on farm in the Sierra of Ecuador, used 13 criteria of different nature: 2 ecogeographic (precipitation, diversity ecogeographical), 6 biological (degree of presence of the crop, races richness, morphological diversity, the presence of mixtures, presence of local races and risk of genetic erosion), 3 cultural (abundance of varieties per farm, diversity of uses and frequency of exchange) and 2 demographic (population size and distance to urban centers). Using GIS techniques and multicriteria evaluation, the original values of the layers-criterion were transformed to a scale of 0 to 100. Later, the normalized layers - criteria were added using three weighting methods: (1) the same weight, (2) different weight according to the score given by 72 experts, and (3) different weight according to the method of comparison between pairs of criteria. The results allowed to identify eight 10 km cells x 10 km with high punctuation (> 65): three cells in the north (one in each of the provinces), a cell in the center (in the Cotopaxi province), and four cells in the south region (two in Azuay and other two in Loja).

DA PENA À PELÍCULA: AS PERSONAGENS DE CARANDIRU

Este estudo enfoca a transposição da obra literária Estação Carandiru, de Drauzio Varella, para o cinema, no que tange à construção de suas personagens. Para tanto, fez-se um levantamento das personagens e de suas características, de ambas as obras. O objetivo maior é compreender as escolhas feitas durante este diálogo entre mídias, que originou o filme Carandiru, de Hector Babenco, visto que houve uma grande redução no número de personagens. Para esta análise, adotou-se a pesquisa descritiva como procedimento metodológico. Constatou-se que a maior parte das origens das personagens cinematográficas vem de fusões de personagens literárias. Mas também foram encontradas personagens literárias que foram desmembradas e algumas que foram eliminadas. Não se encontrou nenhuma personagem acrescentada.(AU)

DA PENA À PELÍCULA: AS PERSONAGENS DE CARANDIRU

Este estudo enfoca a transposição da obra literária Estação Carandiru, de Drauzio Varella, para o cinema, no que tange à construção de suas personagens. Para tanto, fez-se um levantamento das personagens e de suas características, de ambas as obras. O objetivo maior é compreender as escolhas feitas durante este diálogo entre mídias, que originou o filme Carandiru, de Hector Babenco, visto que houve uma grande redução no número de personagens. Para esta análise, adotou-se a pesquisa descritiva como procedimento metodológico. Constatou-se que a maior parte das origens das personagens cinematográficas vem de fusões de personagens literárias. Mas também foram encontradas personagens literárias que foram desmembradas e algumas que foram eliminadas. Não se encontrou nenhuma personagem acrescentada.(AU)

Correlates of latent and productive HIV type-1 infection in tonsillar CD4+ T cells

Correlates of virus load and characteristics of virus-producing cells in tonsillar tissue were investigated. Our results suggest that when less than 1:100 tonsillar CD4+ T cells from individuals infected with HIV type-1 (HIV-1) contain replication competent provirus, the level of CD4+ T cells in tonsils is comparable to that observed in uninfected individuals. Virus load at or above this level was associated with low CD4 cell numbers in tonsillar tissue. Only a few percent of all infected T cells in tonsillar tissue were active virus producers, with minor differences observed between individuals. Plasma viremia was found to correlate with infectious virus load in tonsillar tissue. With less than 1:1,000 of CD4 cells in lymphoid tissues being involved in active virus production, direct cytopathic effect by HIV-1 on infected CD4 cells is unlikely to fully explain the immunodeficiency seen in AIDS.

Digging for dead genes: an analysis of the characteristics of the pseudogene population in the Caenorhabditis elegans genome

Pseudogenes are non-functioning copies of genes in genomic DNA, which may either result from reverse transcription from an mRNA transcript (processed pseudogenes) or from gene duplication and subsequent disablement (non-processed pseudogenes). As pseudogenes are apparently ‘dead’, they usually have a variety of obvious disablements (e.g., insertions, deletions, frameshifts and truncations) relative to their functioning homologs. We have derived an initial estimate of the size, distribution and characteristics of the pseudogene population in the Caenorhabditis elegans genome, performing a survey in ‘molecular archaeology’. Corresponding to the 18 576 annotated proteins in the worm (i.e., in Wormpep18), we have found an estimated total of 2168 pseudogenes, about one for every eight genes. Few of these appear to be processed. Details of our pseudogene assignments are available from http://bioinfo.mbb.yale.edu/genome/worm/pseudogene. The population of pseudogenes differs significantly from that of genes in a number of respects: (i) pseudogenes are distributed unevenly across the genome relative to genes, with a disproportionate number on chromosome IV; (ii) the density of pseudogenes is higher on the arms of the chromosomes; (iii) the amino acid composition of pseudogenes is midway between that of genes and (translations of) random intergenic DNA, with enrichment of Phe, Ile, Leu and Lys, and depletion of Asp, Ala, Glu and Gly relative to the worm proteome; and (iv) the most common protein folds and families differ somewhat between genes and pseudogenes—whereas the most common fold found in the worm proteome is the immunoglobulin fold and the most common ‘pseudofold’ is the C-type lectin. In addition, the size of a gene family bears little overall relationship to the size of its corresponding pseudogene complement, indicating a highly dynamic genome. There are in fact a number of families associated with large populations of pseudogenes. For example, one family of seven-transmembrane receptors (represented by gene B0334.7) has one pseudogene for every four genes, and another uncharacterized family (represented by gene B0403.1) is approximately two-thirds pseudogenic. Furthermore, over a hundred apparent pseudogenic fragments do not have any obvious homologs in the worm.

Preferential expression of an ammonium transporter and of two putative nitrate transporters in root hairs of tomato.

Root hairs as specialized epidermal cells represent part of the outermost interface between a plant and its soil environment. They make up to 70% of the root surface and, therefore, are likely to contribute significantly to nutrient uptake. To study uptake systems for mineral nitrogen, three genes homologous to Arabidopsis nitrate and ammonium transporters (AtNrt1 and AtAmt1) were isolated from a root hair-specific tomato cDNA library. Accumulation of LeNrt1-1, LeNrt1-2, and LeAmt1 transcripts was root-specific, with no detectable transcripts in stems or leaves. Expression was root cell type-specific and regulated by nitrogen availability. LeNrt1-2 mRNA accumulation was restricted to root hairs that had been exposed to nitrate. In contrast, LeNrt1-1 transcripts were detected in root hairs as well as other root tissues under all nitrogen treatments applied. Analogous to LeNrt1-1, the gene LeAmt1 was expressed under all nitrogen conditions tested, and root hair-specific mRNA accumulation was highest following exposure to ammonium. Expression of LeAMT1 in an ammonium uptake-deficient yeast strain restored growth on low ammonium medium, confirming its involvement in ammonium transport. Root hair specificity and characteristics of substrate regulation suggest an important role of the three genes in uptake of mineral nitrogen.