La Ilustración ibérica.

"Semanario científico, literario y artístico."

Boletín de la Sociedad Ibérica de Ciencias Naturales

Mode of access: Internet.

ESPIRITUALIDADE E ARTE: Um estudo do Processo de Transcendência na Produção e Contemplação da Cerâmica

O presente estudo, objeto desta dissertação de mestrado, visa demonstrar a transcendência que ocorre na produção e contemplação da cerâmica. Em outras palavras, apresentar o vínculo entre Espiritualidade e Arte e, para tanto, os conceitos sobre espiritualidade pontuados por Leonardo Boff e de Meishu-Sama constituem os pontos de apoio para o estudo. Acrescentamos igualmente as considerações de Meishu-Sama relativamente à arte, as quais constituem a forma central para estruturação da pesquisa. Todo o processo de produção da Arte Cerâmica desde a escolha da argila até as queimas é descrito na dissertação. Concomitantemente, a fase de contemplação da obra é igualmente levada em consideração a partir do resfriamento do forno até o encontro do ceramista com sua obra. Paralelamente à teoria acerca da transcendência, espiritualidade e arte, fotografias explicam as fases do fazer cerâmico, e peças de cerâmicas auxiliam na compreensão do que pretendemos analisar a presença da espiritualidade durante a produção de uma obra artística aqui, mais especificamente, a cerâmica.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Relaciones entre mareas y otros fenómenos geodinámicos: estudios en la Península Ibérica y California

En el ámbito de la investigación sobre Mareas, existen controversias que han dado lugar a extensos debates científicos y a la publicación de resultados contradictorios. Dos de estas discusiones, ampliamente conocidas, son la interpretación geofísica de los residuos finales de marea gravimétrica y la existencia o no de correlación entre las mareas y la ocurrencia de terremotos. El objetivo fundamental de esta tesis doctoral es realizar aportaciones a ambos aspectos de forma significativa y relevante. Si a las amplitudes y desfasajes de las componentes armónicas del potencial de mareas obtenidas a partir de datos de observación les restamos la parte correspondiente al modelo teórico de marea sólida y también la parte correspondiente al efecto oceánico, obtenemos un vector residuo final de marea cuya interpretación es un asunto muy debatido en Geodesia. Mientras que algunos autores sugieren que los residuos finales están relacionados con posibles errores instrumentales y de medida o con errores en la evaluación de los cálculos de la carga oceánica, otros proponen ciertas relaciones empíricas entre estos residuos finales de marea gravimétrica y parámetros que implican variaciones estructurales con respecto a un modelo de Tierra elástico homogéneo, como el flujo térmico o la edad tectonotérmica de la litosfera...

Contributo para a avaliação do desempenho ambiental de telha cerâmica através da aplicação da pegada ambiental do produto

O presente projeto tem como objetivo principal a aplicação da metodologia da pegada ambiental do produto (PAP) no sector da indústria cerâmica, nomeadamente, para o caso de estudo da telha, permitindo a aferição e comunicação do desempenho ambiental ao longo do ciclo de vida da telha Advance Lusa na tonalidade vermelho natural. Com este intuito procedeu-se à avaliação do ciclo de vida (ACV) dos impactos ambientais gerados pela sua produção, desde a extração de matérias-primas até à fase de distribuição, ou seja, com base numa análise ‘cradle-to-gate’. A implementação da metodologia requer o cálculo dos potenciais impactos ambientais tendo em conta as etapas relevantes no contexto dos limites definidos para o sistema em estudo. O método de avaliação de impactos utilizado é o método ILCD Midpoint + através da utilização do software SimaPro e com recurso às respetivas bibliotecas de bases de dados. A avaliação do perfil de utilização dos recursos e emissões possibilita assim aferir o desempenho ambiental da telha em estudo através da identificação de pontos críticos do sistema considerado. Os resultados indicam que os impactos ambientais se devem, principalmente, à utilização de gás natural na etapa de cozedura e, que a fase de produção e/ou fabrico de telha é a que salienta maiores preocupações do ponto vista ambiental, pelo que deverão ser definidas estratégias com o propósito de verificar a aplicabilidade das melhores técnicas disponíveis (MTDs) e de técnicas emergentes, contribuindo assim, para a procura da sustentabilidade dos processos integrantes do presente estudo.

O papel dos Museus nos constructos da experiência global do destino. O caso do Museu da Cerâmica de Caldas da Rainha.

Enquanto actores, desejavelmente interventivos nos Sistemas Turísticos, os Museus, enfrentam desafios de integração dos seus visitantes no Destino em que se inserem. No âmbito desta complexidade e outros contextos aqui não referidos, estes processos de integração do visitante poderão também oscilar entre a integração na temática específica que sustentam, a integração na cultura mais alargada que personificam ou num âmbito ainda mais vasto, poderão contribuir para a integração numa Experiência Global desse mesmo destino. O Museu da Cerâmica investigado, sustenta e incrementa um Imaginário Colectivo assente numa nostalgia cultural que reafirma a cerâmica local como principal veículo da promoção cultural e patrimonial do destino Caldas da Rainha. O presente trabalho perspectiva a possibilidade do Imaginário, em determinados contextos, poder ser equacionado como uma espécie de preconceito cultural que inibe, ou, no mínimo, não contribui para promover experiências culturais mais vastas. No sentido inverso, ganham importância acrescida estratégias a seguir pelos Museus para que as suas funções pedagógicas e emancipadoras sejam mais amplas e interventivas em função de interesses existentes e previamente assumidos pelo Destino.

The Pico de Navas slump (Burgos, Spain): a large rocky landslide caused by underlying clayey sand fluidification

The Pico de Navas landslide was a large-magnitude rotational movement, affecting 50x106m3 of hard to soft rocks. The objectives of this study were: (1) to characterize the landslide in terms of geology, geomorphological features and geotechnical parameters; and (2) to obtain an adequate geomechanical model to comprehensively explain its rupture, considering topographic, hydro-geological and geomechanical conditions. The rupture surface crossed, from top to bottom: (a) more than 200 m of limestone and clay units of the Upper Cretaceous, affected by faults; and (b) the Albian unit of Utrillas facies composed of silty sand with clay (Kaolinite) of the Lower Cretaceous. This sand played an important role in the basal failure of the slide due to the influence of fine particles (silt and clay), which comprised on average more than 70% of the sand, and the high content presence of kaolinite (>40%) in some beds. Its geotechnical parameters are: unit weight (δ) = 19-23 KN/m3; friction angle (φ) = 13º-38º and cohesion (c) = 10-48 KN/m2. Its microstructure consists of accumulations of kaolinite crystals stuck to terrigenous grains, making clayey peds. We hypothesize that the presence of these aggregates was the internal cause of fluidification of this layer once wet. Besides the faulted structure of the massif, other conditioning factors of the movement were: the large load of the upper limestone layers; high water table levels; high water pore pressure; and the loss of strength due to wet conditions. The 3D simulation of the stability conditions concurs with our hypothesis. The landslide occurred in the Recent or Middle Holocene, certainly before at least 500 BC and possibly during a wet climate period. Today, it appears to be inactive. This study helps to understand the frequent slope instabilities all along the Iberian Range when facies Utrillas is present.

The Neolithic of El Niño cave (Ayna, Albacete) in the Sierra del Segura context

Since its excavation in the summer of 1973, El Niño cave has been considered a key site to understand the process of production economy and pottery technology introduction in South-eastern Iberian Peninsula, and especially to approach how such process could have affected people already settled in the Segura mountains. However, data from El Niño cave was very fragmentary, due to the lack of a broad study of Neolithic occupations of the site. In this paper, we present the analysis of pottery, lithic industry and faunal remains, as well as the existing dates from the site´s Holocene levels. The review of different evidence from the site allows suggesting that El Niño cave would have probably acted as a hunting and shepherding station, being a logistical site of larger places. However, limitations due to the fact that we are dealing with a 40- year-old excavation, prevent specifying how the process of Neolithic introduction in the Segura Mountains occurred.

The management of bone tools from the Bronze Age site of El Portalón of Cueva Mayor, Sierra de Atapuerca, Burgos

In this paper we analyze the set of Bronze Age bone tools recovered at the archaeological site of El Portalón of Cueva Mayor in the Sierra de Atapuerca (Burgos). The Bronze Age cultural period is the best represented in the cavity and its study has forced us to unify the different excavation and stratigraphical criteria undertaken from the earliest archaeological excavations developed by J.M. Apellániz during the 70s until the excavations of the current research team (EIA) since 2000. We propose here for the first time a relationship between the initial system of “beds” used by Apellániz and our recent sedimentary sequence that recognizes eleven stratigraphic levels radiometrically dated from the late Upper Pleistocene to the Middle Age. Within the bone industry assemblage we recognize a large variety of utensils and ornamental elements, with native and allochthonous features, that make evident a regional as well as long distance relationships of these populations of the interior of the Iberian Peninsula during the recent Prehistory.

La cerámica del yacimiento arqueológico de Castillejo del Bonete (Terrinches, Ciudad Real). Estudio morfológico y tecnólogico

El presente trabajo incluye el estudio de un amplio conjunto cerámico perteneciente al yacimiento arqueológico de la Edad del Cobre y Edad del Bronce de Castillejo del Bonete. La muestra fue recuperada de distintas áreas del asentamiento durante la campaña de excavación de 2012. La investigación ha tenido como fin conocer mejor la relación forma-función de las vasijas, su proceso de fabricación, así como el modelo productivo y las posibles manifestaciones simbólicas presentes en el repertorio analizado. La metodología utilizada para cumplir con los objetivos se ha basado en la recopilación de datos, considerando una serie de variables morfológicas y tecnológicas, y su procesamiento con el empleo de técnicas estadísticas sencillas.

Visibilidad y percepción en la construcción de un paisaje Prehistórico. El caso de Calviá (Mallorca, Islas Baleares)

El presente trabajo se centra en el estudio del papel que juega el control visual del espacio en las prácticas sociales de las comunidades prehistóricas. Este trabajo se articula a partir de un estudio de caso, el término municipal de Calviá, situado en el sureste de la isla de Mallorca, para analizar las diferentes formas de monumentalidad arquitectónica y cómo estas se constituyen cómo un punto de referencia social dentro del paisaje. Partiendo de una amplia horquilla temporal, que abarcaría el Bronce Naviforme (1550-850 AC), el período Talayótico (850-550 AC) y el Postalayótico (550-123 AC), se propone analizar los cambios y pervivencias en la construcción del paisaje, a través de estrategias de visibilidad, percepción y movimiento alrededor de los monumentos arquitectónicos. A través de la perspectiva de la Arqueología del Paisaje y mediante el uso de Sistemas de Información Geográfica (SIG) se propone un análisis de tendencias a largo plazo en la configuración social de un paisaje.