Characterization of Treponema phagedenis-like spirochetes isolated from papillomatous digital dermatitis lesions in dairy cattle

Four spirochete strains were isolated from papillomatous digital dermatitis (PDD) lesions in Iowa dairy cattle and compared with two previously described spirochete strains isolated from dairy cattle in California. These six strains shared an identical 16S ribosomal DNA sequence that was 98% similar to Treponema phagedenis and 99% similar to the uncultivated PDD spirochete sequence DDLK-4. The whole-cell protein profiles resolved by sodium dodecyl sulfate-polyacrylamide gel electrophoresis of these six strains were similar. However, these strains showed differences in the antigenic diversity of lipopolysaccharide (LPS). Genetic diversity was also detected by pulsed-field gel electrophoresis of genomic DNA digests, revealing differences among five of the six strains. Serum immunoglobulin G antibodies from dairy cattle with active PDD lesions reacted with the LPS of all but one PDD spirochete strain. Likewise, peripheral blood mononuclear cells from cattle with active PDD lesions produced blastogenic responses to one of the two California isolates. Both antibody and lymphocyte blastogenic responses were reduced in convalescent dairy cattle, suggesting the immune response to these spirochetes has short duration. These results demonstrate genetic and antigenic diversity among T. phagedenis-like treponemes and provide further evidence for the involvement of these spirochetes in the pathogenesis of PDD.

Use of confocal microscopy to follow the development of penetrative hyphae during growth of Rhizopus oligosporus in an artificial solid-state fermentation system

Two methods were compared for determining the concentration of penetrative biomass during growth of Rhizopus oligosporus on an artificial solid substrate consisting of an inert gel and starch as the sole source of carbon and energy. The first method was based on the use of a hand microtome to make sections of approximately 0.2- to 0.4-mm thickness parallel to the substrate surface and the determination of the glucosamine content in each slice. Use of glucosamine measurements to estimate biomass concentrations was shown to be problematic due to the large variations in glucosamine content with mycelial age. The second method was a novel method based on the use of confocal scanning laser microscopy to estimate the fractional volume occupied by the biomass. Although it is not simple to translate fractional volumes into dry weights of hyphae due to the lack of experimentally determined conversion factors, measurement of the fractional volumes in themselves is useful for characterizing fungal penetration into the substrate. Growth of penetrative biomass in the artificial model substrate showed two forms of growth with an indistinct mass in the region close to the substrate surface and a few hyphae penetrating perpendicularly to the surface in regions further away from the substrate surface. The biomass profiles against depth obtained from the confocal microscopy showed two linear regions on log-linear plots, which are possibly related to different oxygen availability at different depths within the substrate. Confocal microscopy has the potential to be a powerful tool in the investigation of fungal growth mechanisms in solid-state fermentation. (C) 2003 Wiley Periodicals, Inc.

Desenvolvimento e análise de uma rede neural artificial para estimativa da erosividade da chuva para o Estado de São Paulo

O conhecimento do valor da erosividade da chuva (R) de determinada localidade é fundamental para a estimativa das perdas de solo feitas a partir da Equação Universal de Perdas de Solo, sendo, portanto, de grande importância no planejamento conservacionista. A fim de obter estimativas do valor de R para localidades onde este é desconhecido, desenvolveu-se uma rede neural artificial (RNA) e analisou-se a acurácia desta com o método de interpolação "Inverso de uma Potência da Distância" (ID). Comparando a RNA desenvolvida com o método de interpolação ID, verificou-se que a primeira apresentou menor erro relativo médio na estimativa de R e melhor índice de confiança, classificado como "Ótimo", podendo, portanto, ser utilizada no planejamento de uso, manejo e conservação do solo no Estado de São Paulo.

Desfolha artificial simulando danos de pragas na cultura do girassol (Helianthus annuus L., Asteraceae)

O girassol está sujeito às perdas de área foliar por diferentes fatores, dentre eles os insetos desfolhadores, contra aos quais geralmente são dirigidas aplicações de inseticidas na cultura. A desfolha artificial em plantas de importância econômica é uma metodologia útil na simulação de ataques dessas pragas em lavouras na determinação dos níveis de dano econômico. O objetivo deste estudo foi avaliar componentes de produção das plantas de girassol submetidas a níveis crescentes de desfolha de 0, 10, 25, 50, 75 e 100%, realizada em três distintos estádios fenológicos da cultura, a saber: V6 (seis folhas com no mínimo 4,0 cm de comprimento), R1 (quando a inflorescência circundada pela bráctea imatura torna-se visível) e R5.5 (50% das flores do disco estão fertilizadas ou em antese), perfazendo um total de 18 tratamentos, os quais foram dispostos em blocos ao acaso, com quatro repetições. Para todos os componentes de produção avaliados (diâmetro do capítulo, biomassa total de sementes da planta e biomassa de 100 aquênios) houve efeito significativo da interação dos tratamentos, evidenciando que o efeito da desfolha será dependente do estágio fenológico da planta. O estádio R5.5 foi mais sensível à desfolha, ocasionando perdas em todos os componentes de produção avaliados.

Dose inseminante utilizada na fertilização artificial de ovócito de piracanjuba (Brycon orbignyanus)

A piracanjuba (Brycon orbignyanus Valenciennes, 1849) é uma espécie de peixe migratória, ameaçada de extinção. O objetivo do presente estudo foi determinar a dose inseminante na fertilização artificial de ovócitos de piracanjuba. Para isso, utilizou-se delineamento em blocos casualizados, com quatro tratamentos e três repetições. Três casais de piracanjuba, selecionados dos tanques de reprodutores da Estação Ambiental de Itutinga (EAI - CEMIG), no período de piracema 2006/2007, receberam aplicação de hormônio extrato bruto de hipófise de carpa (EBHC) para obtenção dos gametas. Adotaram-se quatro tratamentos diferentes para a fertilização de 0,1 grama de ovócitos: 10µL, 20µL, 30µL e 40µL de sêmen. As amostras foram ativadas com 5 mL de água do próprio tanque e, em seguida, levadas para incubadoras, dotadas de renovação constante de água, à temperatura de 28ºC. Após 8 e 16 horas, analisaram-se as taxas de fertilização (ovos viáveis) e de eclosão dos ovos, respectivamente. Os resultados obtidos foram comparados pelo teste de Tukey a 5%. As relações sêmen-ovócitos testadas não alteraram as taxas de fertilização e eclosão (P>0,05). O número de espermatozoides-ovócitos, variando de 10,4 x10(5) a 41,6 x10(5), foi eficiente para obtenção de boas taxas de fertilidade.

Morphological, physical and pedogenetic attributes related to water yield in small watersheds in Guarapari/ES, Brazil

Soil characteristics related to the genesis, land use and management are important factors in water dynamics in watersheds. This study evaluated physical, morphological and pedogenetic attributes related to water yield potential in small watersheds in Guarapari, ES, Brazil. The following representative profiles were selected, morphologically described and sampled in area of Atlantic Forest domain: Lithic Udifolists, Oxyaquic Udifluventes, Typic Paleudults, Typic Hapludults, Typic Hapludox, Oxic Dystrudepts and Typic Endoaquents. Samples were collected in the soil profiles for physical analysis. Measurements of field-saturated hydraulic conductivity and soil penetration resistance were perfomed in some profiles, which were under different uses. The Endoaquents of Limão Creek can be considered efficient as temporary water reservoirs. However, the use of artificial drainage tends to reduce this effect. Differential erosion was detected by the sand texture on the surface of the Typic Paleudults due to the low degree of clay flocculation, slope, high resistance to the penetration and low hydraulic conductivity of the Bt horizon, making it necessary to adopt soil management practices to increase the water infiltration. Under pasture, mainly in the cattle trails where the trampling is more intense, there was high resistance to penetration in the superficial layers of the Typic Hapludults. The Typic Hapludox have the greatest potential for water yield in the small watersheds because of its greater extent in the headwaters and their morphological and physical characteristics, which can result in increased aquifer recharge.

Effect of cattle manure on sunflower production and water use in two types of soil

The aim of the present study was to evaluate water consumption, use efficiency and yield components of sunflower variety Embrapa 122 V/2000 cultivated in two types of soil (Fluvissol and Haplic Luvisol) subjected to increasing doses of cattle manure. The experiment was carried out in a greenhouse at Universidade Estadual da Paraíba. The experimental design was completely randomized in a factorial scheme. The irrigation was performed every other day, replacing the water absorbed by the plants. The water consumption and the use efficiency were evaluated, being the use efficiency determined by the ratio of the total dry mass of sunflower and the amount of water used to produce it in each treatment. Plants were harvested at 95 days after sowing when the following parameters were evaluated: number of seeds per plant, weight of seeds per plant, weight of 1000 seeds and the outer diameter of the capitulum (head). The results showed that the sunflower was positively affected by cattle manure application, increasing the production components and the water use efficiency, regardless of the type of soil. Excepting for the 1000 seeds weight and the water use efficiency, the type of soil affected significantly the water use, the number and weight of seeds per plant. The plants cultivated in Haplic Luvisol had a better performance.

Automatic modeling of pectus excavatum corrective prosthesis using artificial neural networks

Pectus excavatum is the most common deformity of the thorax. Pre-operative diagnosis usually includes Computed Tomography (CT) to successfully employ a thoracic prosthesis for anterior chest wall remodeling. Aiming at the elimination of radiation exposure, this paper presents a novel methodology for the replacement of CT by a 3D laser scanner (radiation-free) for prosthesis modeling. The complete elimination of CT is based on an accurate determination of ribs position and prosthesis placement region through skin surface points. The developed solution resorts to a normalized and combined outcome of an artificial neural network (ANN) set. Each ANN model was trained with data vectors from 165 male patients and using soft tissue thicknesses (STT) comprising information from the skin and rib cage (automatically determined by image processing algorithms). Tests revealed that ribs position for prosthesis placement and modeling can be estimated with an average error of 5.0 ± 3.6 mm. One also showed that the ANN performance can be improved by introducing a manually determined initial STT value in the ANN normalization procedure (average error of 2.82 ± 0.76 mm). Such error range is well below current prosthesis manual modeling (approximately 11 mm), which can provide a valuable and radiation-free procedure for prosthesis personalization.

Automatic modeling of pectus excavatum corrective prosthesis using artificial neural networks

Pectus excavatum is the most common deformity of the thorax. Pre-operative diagnosis usually includes Computed Tomography (CT) to successfully employ a thoracic prosthesis for anterior chest wall remodeling. Aiming at the elimination of radiation exposure, this paper presents a novel methodology for the replacement of CT by a 3D laser scanner (radiation-free) for prosthesis modeling. The complete elimination of CT is based on an accurate determination of ribs position and prosthesis placement region through skin surface points. The developed solution resorts to a normalized and combined outcome of an artificial neural network (ANN) set. Each ANN model was trained with data vectors from 165 male patients and using soft tissue thicknesses (STT) comprising information from the skin and rib cage (automatically determined by image processing algorithms). Tests revealed that ribs position for prosthesis placement and modeling can be estimated with an average error of 5.0 ± 3.6 mm. One also showed that the ANN performance can be improved by introducing a manually determined initial STT value in the ANN normalization procedure (average error of 2.82 ± 0.76 mm). Such error range is well below current prosthesis manual modeling (approximately 11 mm), which can provide a valuable and radiation-free procedure for prosthesis personalization.

Artificial neural networks for automatic modelling of the pectus excavatum corrective prosthesis

Pectus excavatum is the most common deformity of the thorax and usually comprises Computed Tomography (CT) examination for pre-operative diagnosis. Aiming at the elimination of the high amounts of CT radiation exposure, this work presents a new methodology for the replacement of CT by a laser scanner (radiation-free) in the treatment of pectus excavatum using personally modeled prosthesis. The complete elimination of CT involves the determination of ribs external outline, at the maximum sternum depression point for prosthesis placement, based on chest wall skin surface information, acquired by a laser scanner. The developed solution resorts to artificial neural networks trained with data vectors from 165 patients. Scaled Conjugate Gradient, Levenberg-Marquardt, Resilient Back propagation and One Step Secant gradient learning algorithms were used. The training procedure was performed using the soft tissue thicknesses, determined using image processing techniques that automatically segment the skin and rib cage. The developed solution was then used to determine the ribs outline in data from 20 patient scanners. Tests revealed that ribs position can be estimated with an average error of about 6.82±5.7 mm for the left and right side of the patient. Such an error range is well below current prosthesis manual modeling (11.7±4.01 mm) even without CT imagiology, indicating a considerable step forward towards CT replacement by a 3D scanner for prosthesis personalization.

Comparative analysis between statistical and artificial intelligence models in business failure prediction

A growing number of predicting corporate failure models has emerged since 60s. Economic and social consequences of business failure can be dramatic, thus it is not surprise that the issue has been of growing interest in academic research as well as in business context. The main purpose of this study is to compare the predictive ability of five developed models based on three statistical techniques (Discriminant Analysis, Logit and Probit) and two models based on Artificial Intelligence (Neural Networks and Rough Sets). The five models were employed to a dataset of 420 non-bankrupt firms and 125 bankrupt firms belonging to the textile and clothing industry, over the period 2003–09. Results show that all the models performed well, with an overall correct classification level higher than 90%, and a type II error always less than 2%. The type I error increases as we move away from the year prior to failure. Our models contribute to the discussion of corporate financial distress causes. Moreover it can be used to assist decisions of creditors, investors and auditors. Additionally, this research can be of great contribution to devisers of national economic policies that aim to reduce industrial unemployment.