Enabling adaptability in service aggregates using transparent shaping techniques

Distributed applications are exposed as reusable components that are dynamically discovered and integrated to create new applications. These new applications, in the form of aggregate services, are vulnerable to failure due to the autonomous and distributed nature of their integrated components. This vulnerability creates the need for adaptability in aggregate services. The need for adaptation is accentuated for complex long-running applications as is found in scientific Grid computing, where distributed computing nodes may participate to solve computation and data-intensive problems. Such applications integrate services for coordinated problem solving in areas such as Bioinformatics. For such applications, when a constituent service fails, the application fails, even though there are other nodes that can substitute for the failed service. This concern is not addressed in the specification of high-level composition languages such as that of the Business Process Execution Language (BPEL). We propose an approach to transparently autonomizing existing BPEL processes in order to make them modifiable at runtime and more resilient to the failures in their execution environment. By transparent introduction of adaptive behavior, adaptation preserves the original business logic of the aggregate service and does not tangle the code for adaptive behavior with that of the aggregate service. The major contributions of this dissertation are: first, we assessed the effectiveness of BPEL language support in developing adaptive mechanisms. As a result, we identified the strengths and limitations of BPEL and came up with strategies to address those limitations. Second, we developed a technique to enhance existing BPEL processes transparently in order to support dynamic adaptation. We proposed a framework which uses transparent shaping and generative programming to make BPEL processes adaptive. Third, we developed a technique to dynamically discover and bind to substitute services. Our technique was evaluated and the result showed that dynamic utilization of components improves the flexibility of adaptive BPEL processes. Fourth, we developed an extensible policy-based technique to specify how to handle exceptional behavior. We developed a generic component that introduces adaptive behavior for multiple BPEL processes. Fifth, we identify ways to apply our work to facilitate adaptability in composite Grid services.

Development of New Structural Health Monitoring Techniques

During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop – DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

Development of New Structural Health Monitoring Techniques

During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop – DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

A Deontic Analysis of Inter-Organizational Control Requirements

This research focuses on the design and verification of inter-organizational controls. Instead of looking at a documentary procedure, which is the flow of documents and data among the parties, the research examines the underlying deontic purpose of the procedure, the so-called deontic process, and identifies control requirements to secure this purpose. The vision of the research is a formal theory for streamlining bureaucracy in business and government procedures. Underpinning most inter-organizational procedures are deontic relations, which are about rights and obligations of the parties. When all parties trust each other, they are willing to fulfill their obligations and honor the counter parties’ rights; thus controls may not be needed. The challenge is in cases where trust may not be assumed. In these cases, the parties need to rely on explicit controls to reduce their exposure to the risk of opportunism. However, at present there is no analytic approach or technique to determine which controls are needed for a given contracting or governance situation. The research proposes a formal method for deriving inter-organizational control requirements based on static analysis of deontic relations and dynamic analysis of deontic changes. The formal method will take a deontic process model of an inter-organizational transaction and certain domain knowledge as inputs to automatically generate control requirements that a documentary procedure needs to satisfy in order to limit fraud potentials. The deliverables of the research include a formal representation namely Deontic Petri Nets that combine multiple modal logics and Petri nets for modeling deontic processes, a set of control principles that represent an initial formal theory on the relationships between deontic processes and documentary procedures, and a working prototype that uses model checking technique to identify fraud potentials in a deontic process and generate control requirements to limit them. Fourteen scenarios of two well-known international payment procedures -- cash in advance and documentary credit -- have been used to test the prototype. The results showed that all control requirements stipulated in these procedures could be derived automatically.

Estudo da eficiência eletroquímica para tratamento de chorume gerado em aterro sanitário brasileiro

This work was performing effluent degradation studies by electrochemical treatment. The electrochemical oxidation (EO) hydroquinone (H2Q) was carried out in acid medium, using PbO2 electrode by galvanostatic electrolysis, applying current densities of 10 and 30 mA/cm2 . The concentration of H2Q was monitored by differential pulse voltammetry (DPV). The experimental results showed that the galvanostatic electrolysis process performance significantly depends on the applied current density, achieving removal efficiencies of 100% and 80 % and 10 applying 30 mA/cm2 , respectively. Furthermore, the electroanalytical technique was effective in H2Q be used as a detection method. In order to test the efficiency of PbO2 electrode, the electrochemical treatment was conducted in an actual effluent, leachate from a landfill. The liquid waste leachate (600ml effluent) was treated in a batch electrochemical cell, with or without addition of NaCl by applying 7 mA/cm2 . The efficiency of EO was assessed against the removal of thermo-tolerant coliforms, total organic carbon (TOC), total phosphorus and metals (copper, cobalt, chromium, iron and nickel). These results showed that efficient removal of coliforms was obtained (100%), and was further decrease the concentration of heavy metals by the cathode processes. However, results were not satisfactory TOC, achieving low total removal of dissolved organic load. Because it is considered an effluent complex were developed other tests with this effluent to monitor a larger number of decontamination parameters (Turbidity, Total Solids, Color, Conductivity, Total Organic Carbon (TOC) and metals (barium, chromium, lithium, manganese and Zinc), comparing the efficiency of this type of electrochemical treatment (EO or electrocoagulation) using a flow cell. In this assay was compared to electro streaming. In the case of the OE, Ti/IrO2-TaO5 was used as the anode, however, the electrocoagulation process, aluminum electrodes were used; applying current densities of 10, 20 and 30 mA/cm2 in the presence and absence of NaCl as an electrolyte. The results showed that EO using Ti/IrO2–TaO5 was anode as efficient when Cl- was present in the effluent. In contrast, the electrocoagulation flow reduces the dissolved organic matter in the effluent, under certain experimental conditions.

Colonialism, political unconscious and cognitive mapping in the space of the film "Captain Phillips"

The purpose of this article has been made through a Marxist analysis of the US film "Captain Phillips" (PaulGreengrass, 2013), based on a true story. I have found how the evolution of capitalism in the West continuesto consolidate the belief reified in a historical and geographical superiority of the political and socioeconomicwestern models regarding Africa and Asia lowers models. At the same time, through categories like dialecticalmaterialism, criticism of diffusionist theory and application of cognitive mapping to large geopoliticalspaces located in most poor areas of the world, I have realized a remark about currently being articulatingthe political unconscious of working class in rich countries and the poor in poor countries, establishing arelationship between the ideological representation that takes an individual from his historical reality (ona scale that moves from local to global), and how he has developed a mental ability to escape of the responsibilityto make a critical review of what's happening around him in all areas. Finally, through physicalspace captured in the film, I have realized a materialist critique of globalized business process that takesplace through the carriage of goods, outlining spatial and cognitively limits of the mentality of our time, bothamong "winners"as among the "losers", based on the spatial movement of capital.

Exploring Service Innovation Practices Through a Longitudinal Ethnographic Case Study

Case study research has the advantage of investigating issues that are embedded within the context of the case. A novel approach to investigation of the implementation of service innovation process has been adopted through a longitudinal ethnographic case study. This approach was found useful, as the outcome of the study was intended to be an in-depth understanding of firm’s current innovation practices and its consequences with the implementation of a novel business process. In this applied research, an array of longitudinal data was generated chiefly through the technique of participant-observation. Participant-observation as a qualitative or naturalistic method has its roots in ethnographic research. Participant-observation involves “participating in the social world, in whatever role, and reflecting on the products of that participation” (Hammersley & Atkinson, 1983, p.16). This method offers a degree of understanding of the context under study that can come only from personal experience. In this presentation, I discuss the role of the researcher-practitioner as participant-observer and the usefulness of ethnographic case study methodology and participant-observation technique to investigating service innovation practices that are embedded within the context-specific setting of the case.

Analisi e ottimizzazione del flusso di approvvigionamento in una produzione su commessa: il caso CT Pack S.r.l.

La tesi ha l'obiettivo di analizzare e ottimizzare i flussi di approvvigionamento in un'azienda che produce su commessa: CT Pack S.r.L, specializzata nella realizzazione di macchine automatiche per il packaging di biscotti, gelato e cioccolato. Per raggiungere l'obiettivo si è preso come riferimento il modello proposto dal BPR (Business Process Reengineering): sono stati analizzati i principali attori coinvolti, in particolare fornitori e magazzino, mediante l'uso di KPI definiti ad hoc. Sulla base di questi sono stati individuati due processi critici: il primo riguarda la gestione del magazzino, che presenta un'elevata quantità di codici non movimentati anche a causa del processo di gestione del materiale avanzato al termine di ciascuna commessa; il secondo riguarda il materiale a consumo, che impiega i magazzinieri per un tempo eccessivo, è caratterizzato da giacenze per il 30% non movimentate e da supermarket collocati in officina ridondanti e caratterizzati da bassi tassi di utilizzo (anche sotto il 50%). Per risolvere questi problemi ed effettuare una riprogettazione si fa affidamento agli strumenti proposti dal project management: si imposta quindi un progetto che ha l'obiettivo di ridurre nel breve periodo il valore di magazzino mediante lo smaltimento attraverso diverse vie di codici non utilizzati e agisce nel lungo periodo per evitare che le criticità si ripropongano. Mediante la riprogettazione della gestione dei resi di produzione si prevede un maggior controllo, grazie al lavoro congiunto di ufficio tecnico e ufficio acquisti. La nuova gestione del materiale a consumo ha in se alcune delle tecniche proposte dalla lean production (il kanban, per esempio) e integra il fornitore nella catena di approvvigionamento, garantendo un maggior controllo sulle quantità, un risparmio di circa 7 h/mese di lavoro per i magazzinieri e una riduzione delle giacenze del 46%.

Negros misturados: um estudo de caso sobre identidades negras em Mossoró-RN

With more or less 213.000 habitants, Mossoró is the second more developed city from the Rio Grande do Norte. The town is proclamated like the land of freedom. To so far, exist four moments in your history related with the defence of freedom that is point like truthful from so proclamation. Suchlike happenings are the first female vote on Brazil, the resistance against the Lampião s band, the worman s mutiny and the slave release in 1883, five year before the Áurea law sanction. These happenings are commemorate yearly on setember with one big theatrical event called by the freedom high. Inside this contexto of exaltation to freedom, there is one black movement by name black and beautiful. Is the present dissertation, talked about the building of black identities between the black militants of Mossoró and the dwellers from the Santo Antônio district. With such approach, we intend to think about possibles differences or likeness, how the militants and dwellers from the refered district self-calleds like blacks or not. We are understanding black identity like one process to self-affirmation done by specificities of the social context and the individual particularity. This way, the identity change into one dynamic and contextual reality, gone always by one business process against the interaction of the social actors. So we search to discuss the specificities that involve the process to building of black identities in the city of freedom

Determinación de brechas estructurales para la integración de la Responsabilidad Social en una empresa del sector BPO de la ciudad de Manizales

El estudio realizado sobre la determinación de brechas estructurales para la integración de la Responsabilidad Social en una empresa del sector BPO (Business Process Outsourcing) de la ciudad de Manizales tuvo como objetivos: caracterizar los enfoques de responsabilidad social empresarial-RSE-; establecer la relación entre las políticas, prácticas, valores y objetivos corporativos con los principios y materias fundamentales de la RSE, identificar mecanismos de relación con los stakeholders, e identificar las estrategias de comunicación y las acciones para la integración de la RSE. El estudio fue realizado por mediante la aplicación de instrumentos metodológicos basados en la ISO 26000, OHSAS 18001 e ISO 14001, a las áreas de control interno, comercial, operaciones, nómina, compras y presupuesto. Los resultados evidencian brechas en la integración de grupos de interés, en los mecanismos de comunicación interna y externa y en las materias fundamentales, en especial las relacionadas con prácticas laborales y medio ambiente. La implementación del Sistema de Seguridad y Salud en el trabajo basado en las OHSAS 18001 y el Sistema de Gestión ambiental según la ISO 14001 puede contribuir al cierre de brechas detectadas; por otra parte, es fundamental definir estrategias corporativas que fortalezcan la relación y comunicación con los diferentes stakeholders.

Lean universities.

This chapter examines lean implementation in higher education (HE) institutions. There is evidence of lean initiatives beginning in HE in the US in the early 2000s; there is also some evidence of business process improvement activity before this time (Moore et al., 2004; Waterbury et al., 2011). Today, many universities and other HE institutions are pursuing lean thinking.