Schiff Base Complexes and their Assemblies on Surfaces

Schiff bases and their transition metal complexes are of significant current interest even though they have been prepared for decades. They have been used in various applications such as catalysis, corrosion protection, and molecular sensors. In this study, N-aryl Schiff base ketimine ligands as well as numerous new, differently substituted salen and salophen-type ligands and their cobalt(II), copper(II), iron(II), manganese(II), and nickel(II) complexes were synthesised. New solid state structures of the above compounds and the dioxygen coordination properties of cobalt(II) complexes and catalytic properties of three synthesised binuclear complexes were examined. The prepared complexes were applied in the formation of self-assembled layers on a polycrystalline gold surface and liquid-graphite interface. The effect of metal ion and ligand structure on the as-formed patterns was studied. When studying gold surfaces, a unique thiol-assisted dissolution of elemental gold was observed and a new thin gold foil preparation method was introduced. In the summary, synthesis, structures, and properties of Schiff base ligands and their transition metal complexes are described in detail and the applications of these reviewed. Assemblies of other complexes on a liquid-graphite interface and on a gold surface are also presented, and the surface characterisation methods and surfaces employed are described.

Divide-and-Correct Algorithm for Division in a Negative Base

A divide-and-correct algorithm is described for multiple-precision division in the negative base number system. In this algorithm an initial quotient estimate is obtained from suitable segmented operands; this is then corrected by simple rules to arrive at the true quotient.

Re-examination of one-point methods of liquid limit determination

This Paper deals with the analysis of liquid limit of soils, an inferential parameter of universal acceptance. It has been undertaken primarily to re-examine one-point methods of determination of liquid limit water contents. It has been shown by basic characteristics of soils and associated physico-chemical factors that critical shear strengths at liquid limit water contents arise out of force field equilibrium and are independent of soil type. This leads to the formation of a scientific base for liquid limit determination by one-point methods, which hitherto was formulated purely on statistical analysis of data. Available methods (Norman, 1959; Karlsson, 1961; Clayton & Jukes, 1978) of one-point liquid limit determination have been critically re-examined. A simple one-point cone penetrometer method of computing liquid limit has been suggested and compared with other methods. Experimental data of Sherwood & Ryley (1970) have been employed for comparison of different cone penetration methods. Results indicate that, apart from mere statistical considerations, one-point methods have a strong scientific base on the uniqueness of modified flow line irrespective of soil type. Normalized flow line is obtained by normalization of water contents by liquid limit values thereby nullifying the effects of surface areas and associated physico-chemical factors that are otherwise reflected in different responses at macrolevel.Cet article traite de l'analyse de la limite de liquidité des sols, paramètre déductif universellement accepté. Cette analyse a été entreprise en premier lieu pour ré-examiner les méthodes à un point destinées à la détermination de la teneur en eau à la limite de liquidité. Il a été démontré par les caractéristiques fondamentales de sols et par des facteurs physico-chimiques associés que les résistances critiques à la rupture au cisaillement pour des teneurs en eau à la limite de liquidité résultent de l'équilibre des champs de forces et sont indépendantes du type de sol concerné. On peut donc constituer une base scientifique pour la détermination de la limite de liquidité par des méthodes à un point lesquelles, jusqu'alors, n'avaient été formulées que sur la base d'une analyse statistique des données. Les méthodes dont on dispose (Norman, 1959; Karlsson, 1961; Clayton & Jukes, 1978) pour la détermination de la limite de liquidité à un point font l'objet d'un ré-examen critique. Une simple méthode d'analyse à un point à l'aide d'un pénétromètre à cône pour le calcul de la limite de liquidité a été suggérée et comparée à d'autres méthodes. Les données expérimentales de Sherwood & Ryley (1970) ont été utilisées en vue de comparer différentes méthodes de pénétration par cône. En plus de considérations d'ordre purement statistque, les résultats montrent que les méthodes de détermination à un point constituent une base scientifique solide en raison du caractère unique de la ligne de courant modifiée, quel que soit le type de sol La ligne de courant normalisée est obtenue par la normalisation de la teneur en eau en faisant appel à des valeurs de limite de liquidité pour, de cette manière, annuler les effets des surfaces et des facteurs physico-chimiques associés qui sans cela se manifesteraient dans les différentes réponses au niveau macro.

Arithmetic Algorithms in a Negative Base

Algorithms are described for the basic arithmetic operations and square rooting in a negative base. A new operation called polarization that reverses the sign of a number facilitates subtraction, using addition. Some special features of the negative-base arithmetic are also mentioned.

Deterministic Division Algorithm in a Negative Base

Described here is a deterministic division algorithm in a negative-base number system; here, the divisor is mapped into a suitable range by premultiplication, so that the choice of the quotient digit is deterministic.

Mononitrosalted and phenylamido substituted chelate linkage isomers of quadridentate Schiff base copper(II) complexes

The nitrosation of monophenylamido substututed quadridentate Schiff base complexes of copper(II) are observed to adopt N-bonded isonitroso coordination whereas the phenylisocyanation of the corresponding mononitrosated quadridentate complexes are found to prefer O-bonded isonitroso coordination.

Short-term survival of discarded pearl perch (Glaucosoma scapulare Ramsay, 1881) caught by hook-and-line in Queensland, Australia

Post-release survival of line-caught pearl perch (Glaucosoma scapulare) was assessed via field experiments where fish were angled using methods similar to those used by commercial, recreational and charter fishers. One hundred and eighty-three individuals were caught during four experiments, of which >91 survived up to three days post-capture. Hook location was found to be the best predictor of survival, with the survival of throat- or stomach-hooked pearl perch significantly (P < 0.05) lower than those hooked in either the mouth or lip. Post-release survival was similar for both legal (≥35 cm) and sub-legal (<35 cm) pearl perch, while those individuals showing no signs of barotrauma were more likely to survive in the short term. Examination of the swim bladders in the laboratory, combined with observations in the field, revealed that swim bladders rupture during ascent from depth allowing swim bladder gases to escape into the gut cavity. As angled fish approach the surface, the alimentary tract ruptures near the anus allowing swim bladder gases to escape the gut cavity. As a result, very few pearl perch exhibit barotrauma symptoms and no barotrauma mitigation strategies were recommended. The results of this study show that pearl perch are relatively resilient to catch-and-release suggesting that post-release mortality would not contribute significantly to total fishing mortality. We recommend the use of circle hooks, fished actively on tight lines, combined with minimal handling in order to maximise the post-release survival of pearl perch.

Line tension of a two dimensional gas-liquid interface

In two dimensional (2D) gas-liquid systems, the reported simulation values of line tension are known to disagree with the existing theoretical estimates. We find that while the simulation erred in truncating the range of the interaction potential, and as a result grossly underestimated the actual value, the earlier theoretical calculation was also limited by several approximations. When both the simulation and the theory are improved, we find that the estimate of line tension is in better agreement with each other. The small value of surface tension suggests increased influence of noncircular clusters in 2D gas-liquid nucleation, as indeed observed in a recent simulation.

Isotope shifts and hyperfine structure in the 555.8-nm S-1(0) -> P-3(1) line of Yb

We apply our technique of using a Rb-stabilized ring-cavity resonator to measure the frequencies of various spectral components in the 555.8-nm 1S0-->3P1 line of Yb. We determine the isotope shifts with 60 kHz precision, which is an order-of-magnitude improvement over the best previous measurement on this line. There are two overlapping transitions, 171Yb(1/2-->3/2) and 173Yb(5/2-->3/2), which we resolve by applying a magnetic field. We thus obtain the hyperfine constants in the 3P1 state of the odd isotopes with a significantly improved precision. Knowledge of isotope shifts and hyperfine structure should prove useful for high-precision calculations in Yb necessary to interpret ongoing experiments testing parity and time-reversal symmetry violation in the laws of physics.

Queensland Spanner Crab Fishery: Commercial quota setting for June 2016 – May 2018

The Queensland (QLD) fishery for spanner crabs primarily lands live crab for export overseas, with gross landings valued around A$5 million per year. Quota setting rules are used to assess and adjust total allowable harvest (quota) around an agreed target harvest of 1631 t and capped at a maximum of 2000 t. The quota varies based on catch rate indicators from the commercial fishery and a fishery independent survey. Quota management applies only to ‘Managed Area A’ which includes waters between Rockhampton and the New South Wales (NSW) border. This report has been prepared to inform Fisheries Queensland (Department of Agriculture and Fisheries) and stakeholders of catch trends and the estimated quota of spanner crabs in Managed Area A for the forthcoming annual quota periods (1 June 2016–31 May 2018). The quota calculations followed the methodology developed by the crab fishery Scientific Advisory Group (SAG) between November 2007 and March 2008. The QLD total reported spanner crab harvest was 1170 t for the 2015 calendar year. In 2015, a total of 55 vessels were active in the QLD fishery, down from 262 vessels at the fishery’s peak activity in 1994. Recent spanner crab harvests from NSW waters average about 125 t per year, but fell to 80 t in 2014–2015. The spanner crab Managed Area A commercial standardised catch rate averaged 0.818 kg per net-lift in 2015, 22.5% below the target level of 1.043. Compared to 2014, mean catch rates in 2015 were marginally improved south of Fraser Island. The NSW–QLD survey catch rate in 2015 was 20.541 crabs per ground-line, 33% above the target level of 13.972. This represented an increase in survey catch rates of about four crabs per groundline, compared to the 2014 survey. The QLD spanner crab total allowable harvest (quota) was set at 1923 t in the 2012-13 and 2013-14 fishing years, 1777 t in 2014-15 and 1631 t in 2015-16. The results from the current analysis rules indicate that the quota for the next two fishing years be retained at the base quota of 1631 t.