New records of feather mites (Acari: Astigmata) from Brazil, with description of a new species from the Black Vulture (Aves: Cathartidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Immediate loading of implants installed in a healed alveolar bony ridge or immediately after tooth extraction: an experimental study in dogs

ObjectiveTo compare the sequential healing at immediately loaded implants installed in a healed alveolar bony ridge or immediately after tooth extraction.Material and methodsIn the mandible of 12 dogs, the second premolars were extracted. After 3months, the mesial roots of the third premolars were endodontically treated and the distal roots extracted. Implants were placed immediately into the extraction sockets (test) and in the second premolar region (control). Crowns were applied at the second and third maxillary premolars, and healing abutments of appropriate length were applied at both implants placed in the mandible and adapted to allow occlusal contacts with the crowns in the maxilla. The time of surgery and time of sacrifices were planned in such a way to obtain biopsies representing the healing after 1 and 2weeks and 1 and 3months. Ground sections were prepared for histological analyses.ResultsAt the control sites, a resorption of the buccal bone of 1mm was found after 1week and remained stable thereafter. At the test sites, the resorption was 0.4mm at 1-week period and further loss was observed after 1month. The height of the peri-implant soft tissue was 3.8mm both at test and control sites. Higher values of mineralized bone-to-implant contact and bone density were seen at the controls compared with the test sites. The differences, however, were not statistically significant.ConclusionsDifferent patterns of sequential early healing were found at implants installed in healed alveolar bone or in alveolar sockets immediately after tooth extractions. However, three months after implant installation, no statistically significant differences were found for the hard- and soft-tissue dimensions.

Bat coronavirus in brazil related to appalachian ridge and porcine epidemic diarrhea viruses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Two new species of the feather mite genus Analloptes (Trouessart, 1885) (Acariformes: Astigmata: Xolalgidae) from passerines (Aves: Passeriformes) in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ridge-based fingerprint matching using hough transform

Despite the efficacy of minutia-based fingerprint matching techniques for good-quality images captured by optical sensors, minutia-based techniques do not often perform so well on poor-quality images or fingerprint images captured by small solid-state sensors. Solid-state fingerprint sensors are being increasingly deployed in a wide range of applications for user authentication purposes. Therefore, it is necessary to develop new fingerprint-matching techniques that utilize other features to deal with fingerprint images captured by solid-state sensors. This paper presents a new fingerprint matching technique based on fingerprint ridge features. This technique was assessed on the MSU-VERIDICOM database, which consists of fingerprint impressions obtained from 160 users (4 impressions per finger) using a solid-state sensor. The combination of ridge-based matching scores computed by the proposed ridge-based technique with minutia-based matching scores leads to a reduction of the false non-match rate by approximately 1.7% at a false match rate of 0.1%. © 2005 IEEE.

Cranial osteology of meiglyptini (aves: piciformes: picidae)

The Meiglyptini comprise eight species grouped into three genera: Meiglyptes and Mulleripicus, with three species each, and Hemicircus, with two species. The aim of the present study was to describe the cranial osteology of six species and three genera of Meiglyptini and to compare them to each other, as well as with other species of woodpeckers and other bird groups. The cranial osteology varied among the investigated species, but the most markedly distinct characteristics were: (1) a frontal overhang is only observed in the middle portion of the frontale of H. concretus; (2) the Proc. zygomaticus and suprameaticus are thick and long in species of the genus Mulleripicus, but short in other species; (3) the Pes pterygoidei is relatively larger in species of the genus Mulleripicus, while it is narrow, thin and relatively smaller in species of the genus Meiglyptes and indistinct in H. concretus; (4) the bony projection of the ectethmoidale is relatively short and thin in species of Mulleripicus and more developed in H. concretus. It appears that the greatest structural complexity of the cranial osteology is associated with the birds' diet, with the frugivorous H. concretus being markedly different from the insectivorous species.

Índice de importância de diferentes espécies de plantas na atração de aves para uma área reflorestada em Piracicaba

A restauração de áreas degradadas pode beneficiar espécies típicas do ambiente original, com a expansão e criação de habitats, tornando-se uma ferramenta de extrema importância para a conservação. Frugívoros atraídos por plantas zoocóricas utilizadas em plantios não apenas podem dispersar sementes dessas plantas como também trazer sementes alóctones, promovendo a diversidade genética local. Assim, é fundamental entender as condições em que o processo de dispersão de sementes opera, a fim de subsidiar programas de recuperação ambiental. Este trabalho avaliou a importância das espécies: embaúba (Cecropia pachystachya), pitanga (Eugenia uniflora), figueira-do-brejo (Ficus insipida), aroeira-pimenteira (Schinus terebinthifolius), pau-pólvora (Trema micranta), fumo-bravo (Solanum mauritianum) na atração de aves frugívoras em uma Área de Preservação Permanente de 6,2 ha replantada em 2006 no município de Piracicaba, São Paulo. Apenas C. pachystachya, E. uniflora e F. insipida foram utilizadas no plantio, o que indica que as outras espécies foram introduzidas pela fauna. Observações focais foram realizadas em pelo menos dois indivíduos de cada espécie, totalizando dez horas de observação por espécie. Foram registradas 29 espécies de aves alimentandose dos frutos. Utilizando-se de uma adaptação da fórmula de Murray (2000) para o índice de importância na atração da avifauna, foram encontrados os valores de 0,086 para C. pachystachya, 0,031 para E. uniflora, 0,020 para F. insipida, 0,123 para S. terebinthifolius, 0,083 para S. mauritianum e 0,623 para T. micrantha. O grande valor observado para essa última em relação às outras pode ser justificado pelo grande número de espécies visitantes e de relações exclusivas, especialmente com aves que são predominantemente insetívoras ou granívoras. A importância de T. micrantha provavelmente se deve à alta concentração de lipídios em seu fruto. Os...

Assembleia de aves em dois fragmentos florestais no interior do estado de São Paulo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chromosomal evolution of South American Columbiformes (Aves)

Karyotypes are compared of 14 species of Brazilian Columbiformes (family Columbidae): Claravis pretiosa (2n=74), Columba cayennensis (2n=76), Columba picazuro (2n=76), Columba speciosa (2n=76), Columbina minuta (2n=76), Columbina passerina (2n=76), Columbina picui (2n=76), Columbina talpacoti (2n=76), Geotrygon montana (2n=86), Leptotila rufaxilla (2n=76), Leptotila verreauxi (2n=78), Scardafella squammata (2n=78), Uropelia campestris (2n=68) and Zenaida auriculata (2n=76). The macrochromosomes of each species were analysed by conventional Giemsa staining, cytobiometrically and with G-and C-banding. All species studied are characterized by typical bird karyotypes with a few pairs of macrochromosomes and many microchromosomes. The morphology and relative length of the Z chromosome are nearly the same in all species, but the W chromosome shows variation. The G-band patterns of the first pair in Columbiformes show a large positive band distally in the long arm, common to all species of the order. The constitutive heterochromatin is restricted to the centromeres of the macro- and microchromosomes. The W is the most heterochromatic chromosome in all species studied. Studies of relative lengths, arm ratios and G- and C-banding patterns showed that in Columbiformes pairs 3, 4 and 5 are the most stable. The types of rearrangements distinguishing between species vary among the genera: pericentric inversions in Columba; fusions and translocations in Uropelia; centric fissions in Geotrygon; fusions, translocations, para and pericentric inversions in Columbina, Leptotila, Zenaida and Scardafella. On the basis of the karyological findings the phylogenetic relationships of the Brazilian Columbiformes are discussed. © 1984 Dr W. Junk Publishers.

Formulação não linear: novas oportunidades para a produção de aves e melhoria da rentabilidade

As atuais estratégias de formulação exigiram a aplicação de novas ferramentas computacionais, que utilizam a modelagem matemática, dando suporte na tomada de decisão para uma nutrição de precisão. Por este motivo, destaca-se a programação não linear, que não visa apenas formular uma dieta que atenda as necessidades do animal, segundo o custo mínimo, mas também maximizar a margem de lucro. Assim, o presente trabalho teve como objetivo validar a utilização do modelo/princípio não linear (PNL), com maximização do retorno econômico, através de estimativas de desempenho das aves e dos custos da ração, segundo a variação de preço do kg do frango de corte (preço médio histórico de 2009 e 2010), as fases de criação e do sexo. Para tanto, foram utilizados 480 pintos de corte, 240 machos e 240 fêmeas de mesma linhagem (Cobb 500), no período de 1 a 56 dias de idade. O delineamento experimental foi inteiramente ao acaso, totalizando 6 tratamentos (aumentado ou diminuído em 25% ou 50% o preço médio histórico), com 4 repetições e 10 aves por parcela experimental. As aves foram alimentadas ad libitum com água e rações experimentais, formuladas à base de milho, farelo de soja, óleo de soja, suplemento vitamínico e mineral, calcário e fosfato bicálcico. Foi avaliado o desempenho (ganho de peso, consumo e conversão alimentar), consumo total energético e lucro nas diferentes fases (inicial, crescimento e terminação). O consumo de ração mostrou diferença significativa (P<0,05) entre as dietas que foram formuladas segundo o princípio não linear e linear. O consumo total energético foi significativamente influenciado (P<0,05) tanto pelo princípio de formulação como pela variação do preço histórico do frango, sendo o esperado, uma vez que essa condição é que viabiliza a aplicação do modelo para máximo lucro. Quanto ao lucro foi demonstrado que o princípio de formulação não linear permite minimizar as perdas significativamente (P<0,05), principalmente em condições desfavoráveis do preço do frango no mercado. Conclui-se que a programação não linear favorece a nutrição de precisão, partindo de um principio que este método oferece novas oportunidades para a produção de aves e melhorias de rentabilidade.

The influence of the alveolar ridge shape on the stress distribution in a free-end saddle removable partial denture supported by implant

The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.

Reconstruction of maxillary ridge atrophy caused by dentoalveolar trauma, using autogenous block bone graft harvested from chin: a case report

Background Dentoalveolar trauma, especially when involving front teeth, negatively affect the patient’s life; in particular, tooth avulsion is a complex injury that affects multiple tissues, and no treatment option offers stable long-term outcomes. The aim of this study was to report a case of reconstruction of atrophic anterior alveolar ridge after tooth loss, performed with autograft harvested from the chin, and subsequent prosthetic rehabilitation with the use of an osseointegrated implant. Case report A 23-years-old Caucasian girl, presented an atrophic alveolar bone in the area of tooth 11, as a result of tooth resorption 10 years after a tooth reimplantation procedure. Reconstruction was performed with autogenous bone harvested from the chin. After 6-months healing period to allow autograft incorporation, a dental implant was inserted. After further 6- months, a screw-retained implant supported metal-ceramic prosthesis was fabricated. Results The prosthetic rehabilitation was successful, and after a follow-up period of 5 years, the achieved result was stable.Conclusion It can be concluded that the autogenous bone graft harvested from the chin, is a safe and effective option for alveolar ridge defects reconstruction, allowing a subsequent placement of a dental implant supporting a prosthetic restoration.

Reconstruction of maxillary ridge atrophy caused by sequela of dentoalveolar trauma with autogenous bone graft harvested from mentum

Dentoalveolar traumatisms, particularly those that affect the anterior teeth, interfere adversely in the patient s life.Among them, tooth avulsion is pointed out because it is characterized as a complex injury that affects multiple tissues, andbecause there is no effective treatment available for its resolution with a stable long-term outcome.Aim/Hypothesis: The aim of the present study was to relate a clinical case of complete reconstruction of atrophy of the alveolarbone corresponding to tooth 11, lost by tooth resorption 10 years after the tooth reimplantation procedure.Material and methods: Reconstruction was performed with autogenous bone harvested from the mentum donor site. Surgicalaccess began in the receptor area with a Newman mucoperiosteal incision using a scalpel blade 15 mounted in a scalpel handlefor detachment and exposure of the receptor site. Extensive bone resorption was observed in the vestibular-palatine direction,proved by the thinness of the receptor bed. Decorticalization of the vestibular bone plate was performed. After preparing thereceptor bed, and incision was made in the mucosa in the depth of the anterior vestibular fornix, then a perpendicular muscleperiostealincision to detach and exposure the donor area. The bone graft necessary for reconstruction of the donor area wasdelimited, followed by monocortical osteotomy and the monocortical graft was removed. The next stage was to perform shapingfor passive graft accommodation and fixation by means of two bicortical screws. After fixation of the graft the sharp angles wererounded off in order to avoid possible exposure and/or fenestrations of the reconstructed area, then the receptor and donor areawere sutured. After the 6-month period to allow incorporation of the autogenous graft, an osseointegrated dental implant wasinserted. At the end of the 6-month period of waiting for osseointegration to occur, the process of fabricating the screw-retainedmetal ceramic

Ácaros de penas (Acari: Astigmata) em aves não passeriformes do Brasil

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Densidade, seleção de micro-habitat e distribuição de Phylloscartes eximius (Aves: Tyrannidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)