A TAXONOMIC REVIEW OF TYLOTOTRITON VERRUCOSUS ANDERSON (AMPHIBIA, CAUDATA, SALAMANDRIDAE)

Generally it has not been recognized that salamanders of two distinctive color morphs currently are assigned to Tylototriton verrucosus Anderson. One form is uniformly dark brown dorsally, with bright orange coloration confined to the ventral edge of the tail; the other has a dark brown to black dorsal ground color with orange dorsolateral warts, an orange vertebral crest, and orange lateral and medial crests on the head. In addition, the limbs and ventrolateral surfaces of the second form have a variable pattern of orange coloration. The brown form occurs in northeastern India, Nepal, northern Burma, Bhutan, northern Thailand, the type locality in extreme western Yunnan, and perhaps in northern Vietnam. The orange-patterned form occurs only in western Yunnan Province, People's Republic of China. The two forms appear to be allopatric but occur close together in the area of the type locality near the Burma border in western Yunnan. There is no evidence of color intergradation in specimens from this region. Analyses of morphometric and meristic characters, however, suggest the possibility of limited genetic exchange between adjacent populations of brown and orange-patterned forms in western Yunnan. The genetic and taxonomic relationships between the two forms is not fully resolved. However, these two highly distinctive forms obviously have evolved along independent trajectories and merit taxonomic recognition. We therefore propose to restrict the concept of Tylototriton verrucosus to the brown form and designate a neotype for that purpose, and we describe a new species to receive the orange-patterned form.

Sexual behavior in a one-male unit of Rhinopithecus bieti in captivity

Data regarding the sexual behavior of black-and-white snub-nosed monkeys (Rhinopithecus bieti) were collected in 1998 in a one-male unit in captivity by all-occurrences sampling during the mating season. Before the present study, little was known about the sexual behavior of this species. This study showed that female solicitation is mainly expressed as "prostration plus glancing laterally" (PG) or "sitting plus head moving up and down" (HM), and male solicitation is exhibited by the "grunt bared-teeth display." The mount-to-ejaculation ratio was 5.2 on average, and single-mount ejaculations (SMEs) were observed in only 4.4% of mounts on days with at least one ejaculation. Therefore, the main copulatory pattern of this species is multiple-mount ejaculation (MME). Females initiated 72% of 18 ejaculatory mounts. Females initiated more ejaculatory mounts than non-ejaculatory ones. In general, the patterns of sexual behavior in this species are similar to those reported for other Colobines. (C) 2004 Wiley-Liss, Inc.

A taxonomic revision of the genus Pseudostegana Okada, 1978 (Diptera, Drosophilidae)

The genus Pseudostegana is revised, with descriptions of 20 new species from Southeast Asia: P. angustifasciata Chen and Wang, sp. n., P. atrofrons Chen and Toda, sp. n., P. bifasciata Chen and Toda, sp. n., P. bisetosa Chen and Toda, sp. n., P. curvata Chen and Toda, sp. n., P. dactylis Chen and Toda, sp. n., P. dolichopoda Chen and Wang, sp. n., P. hamata Chen and Toda, sp. n., P. latifasciata Chen and Toda, sp. n., P. leptoptera Chen and Toda, sp. n., P. melanogaster Chen and Toda, sp. n., P. melanopogonias Chen and Toda, sp. n., P. myrmecoformis Chen and Toda, sp. n., P. nitidifrons Chen and Wang, sp. n., P. nitidiventris Chen and Toda, sp. n., P. orbicapitata Chen and Toda, sp. n., P. oxycephala Chen and Toda, sp. n., P. pallidimaculata Chen and Wang, sp. n., P. philoga Chen and Wang, sp. n. and P xanthoptera Chen and Wang, sp. n. On the basis of the wing patterns, six species-groups are established: the atrofrons, grandipalpis, fleximediata, javana, latiparma and zonaria groups. A key to the all species of this genus is provided.

Multiple color reflection in a single unit cell using double-layer electrochromic reaction

Multiple color states have been realized in single unit cell using double electrochromic (EC) reaction. The precise control of bistability in EC compounds which can maintain several colors on the two separated electrodes allows this new type of pixel to be realized. The specific electrical driving gives a way to maintain both sides in the reduced EC states and this colors overlapping in the vertical view direction can achieve the black state. The four color states (G, B, W, BK) in one cell/pixel can make a valuable progress to achieve a high quality color devices such like electronic paper, outdoor billboard, smart window and flexible display using external light source. © 2012 Optical Society of America.

Graphics processing unit cooling solutions: Acoustic characteristics

The change in acoustic characteristics in personal computers to console gaming and home entertainment systems with the change in the Graphics Processing Unit (GPU), is presented. The tests are carried out using identical configurations of the software and system hardware. The prime components of the hardware used in the project are central processing unit, motherboard, hard disc drive, memory, power supply, optical drive, and additional cooling system. The results from the measurements taken for each GPU tested are analyzed and compared. The test results are obtained using a photo tachometer and reflective tape adhered to one particular fan blade. The test shows that loudness is a psychoacoustic metric developed by Zwicker and Fastal that aims to quantify how loud a sound is perceived as compared to a standard sound. The acoustic experiment reveals that the inherent noise generation mechanism increases with the increase of the complexity of the cooling solution.

The effects of operational and design parameters on the tolerance of ADSR fuel pin cladding to beam interruptions

This paper investigates the effects of design parameters, such as cladding and coolant material choices, and operational phenomena, such as creep and fission product decay heat, on the tolerance of Accelerator Driven Subcritical Reactor (ADSR) fuel pin cladding to beam interruptions. This work aims to provide a greater understanding of the integration between accelerator and nuclear reactor technologies in ADSRs. The results show that an upper limit on cladding operating temperature of 550 °C is appropriate, as higher values of temperature tend to accelerate creep, leading to cladding failure much sooner than anticipated. The effect of fission product decay heat is to reduce significantly the maximum stress developed in the cladding during a beam-trip-induced transient. The potential impact of irradiation damage and the effects of the liquid metal coolant environment on the cladding are discussed. © 2013 Elsevier Ltd. All rights reserved.

A method for analysing operational complexity in supply chains

This paper proposes a method for analysing the operational complexity in supply chains by using an entropic measure based on information theory. The proposed approach estimates the operational complexity at each stage of the supply chain and analyses the changes between stages. In this paper a stage is identified by the exchange of data and/or material. Through analysis the method identifies the stages where the operational complexity is both generated and propagated (exported, imported, generated or absorbed). Central to the method is the identification of a reference point within the supply chain. This is where the operational complexity is at a local minimum along the data transfer stages. Such a point can be thought of as a 'sink' for turbulence generated in the supply chain. Where it exists, it has the merit of stabilising the supply chain by attenuating uncertainty. However, the location of the reference point is also a matter of choice. If the preferred location is other than the current one, this is a trigger for management action. The analysis can help decide appropriate remedial action. More generally, the approach can assist logistics management by highlighting problem areas. An industrial application is presented to demonstrate the applicability of the method. © 2013 Operational Research Society Ltd. All rights reserved.

Electronic load interface for improving PV dual-converter system operational margin

An electronic load interface (ELI) for improving the operational margin of a photovoltaic (PV) dual-converter system under dynamic conditions is presented. The ELI - based on a modified buck-boost converter - interfaces the output of the converters and the load system. It improves the operational margin of the PV dual-converter system by extending the conditions under which the dual-converter system operates at the maximum power point. The ELI is activated as and when needed, so as minimise system losses. By employing the ELI, utilisation and efficiency of a PV dual-converter system increases. In general, the concept of the ELI can be applied to multi-converter PV systems - such as multi-converter inverters, and multi-converter DC-DC converter systems - for performance and efficiency improvement. © 2013 The Institution of Engineering and Technology.

Implementation of trailer steering control on a multi-unit vehicle at high speeds

A high-speed path-following controller for long combination vehicles (LCVs) was designed and implemented on a test vehicle consisting of a rigid truck towing a dolly and a semitrailer. The vehicle was driven through a 3.5 m wide lane change maneuver at 80 km/h. The axles of the dolly and trailer were steered actively by electrically-controlled hydraulic actuators. Substantial performance benefits were recorded compared with the unsteered vehicle. For the best controller weightings, performance improvements relative to unsteered case were: lateral tracking error 75% reduction, rearward amplification (RA) of lateral acceleration 18% reduction, and RA of yaw rate 37% reduction. This represents a substantial improvement in stability margins. The system was found to work well in conjunction with the braking-based stability control system of the towing vehicle with no negative interaction effects being observed. In all cases, the stability control system and the steering system improved the yaw stability of the combination. © 2014 by ASME.

Genetic Diversity of the Plankton Community and Its Relation to Taxonomic Composition and Environmental Factors in Lake Xiliang

Genetic diversity of the plankton community in Lake Xiliang was depicted by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) fingerprinting. Seventy-seven bands (33 of 16S rDNA and 44 of 18S rDNA) were detected, sixty-two planktonic taxa were identified in six sample stations in November 2007. The most common taxa were Ceratium hirundinella, Bdelloidea, Keratella cochlearis, Polyarthra trigla, and copepod nauplii. Based on environmental factors, taxonomic composition, and PCR-DGGE fingerprinting, unweighted pair-group method using arithmetic averages clustering and principal components analysis were used to analyze habitat similarities. There was distinct spatial heterogeneity in Lake Xiliang, and the genetic diversity of the plankton community was closely related to taxonomic composition and environmental factors.

Taxonomic notes on water bloom forming Microcystis species (Cyanophyta) from China - An example from samples of the Dianchi Lake

Ten common species of Microcystis, based on the examination of water samples from the Dianchi Lake, Yunnan, China, were morphologically described, and their taxonomy was also discussed. They are Microcystis aeruginosa, M botrys, M firma, M flos-aquae, M ichthyoblabe, M novacekii, M pseudofilamentosa, M smithii, M viridis and M wesenbergii. Taxonomic status of other Microcystis species reported in China was also evaluated.