Tratamiento químico y biológico de efluentes mineros cianurados a escala laboratorio

El cianuro es el compuesto químico empleado por excelencia para la lixiviación de oro en la industria minera. Sin embargo, es altamente tóxico para los organismos que se desarrollan alrededor de las industrias mineras, y para el medio ambiente. Con el fin de reducir los niveles de cianuro libre en efluentes provenientes de la minería, el trabajo se enfocó en determinar las condiciones óptimas para la degradación de cianuro empleando compuestos químicos y un consorcio microbiano. Los ensayos químicos y biológicos se realizaron por separado, utilizando muestras de efluentes provenientes de la minería a diferentes concentraciones de cianuro (280 y 10 mg/l CN-). Para la degradación química se utilizó tres oxidantes diferentes: hipoclorito de sodio, peróxido de hidrógeno y ácido de caro en diferentes concentraciones, pH (10-11) y tiempos de degradación (4,71 y 20,75 h). Para los ensayos de biodegradación se empleó un consorcio microbiano en matraces que contenían el efluente cianurado y medio líquido a pH (11), agitación (200 rpm) y temperatura (20±5°C). Se midió la concentración de cianuro libre, pH y la concentración de biomasa. Los resultados del tratamiento químico mostraron que el mejor compuesto oxidante fue el peróxido de hidrógeno (8:1 gH2O2/gCN-) a pH (10), obteniendo un 92,7% remoción de cianuro libre en 45 minutos (280 mg/l CN-) y un 91,0% de remoción en 25 minutos (10 mg/l CN-). Mientras que en la degradación biológica en matraces la remoción fue del 73,7% (280 mg/l CN-) en 384 h y de 78,6% (10 mg/l CN-) en 240 h.

Degradação de Ocratoxina a: estudo de processo e toxicidade

A ocratoxina A (OTA), micotoxina encontrada em diferentes níveis e em diversas matrizes, apresenta efeitos carcinogênicos, nefrotóxicos e teratogênicos. O desenvolvimento de métodos capazes de diminuir esta contaminação a níveis permitidos pela legislação é incentivado e os processos biológicos utilizados envolvem o uso de enzimas e/ou microrganismos para degradação da OTA e são preferenciais pela especificidade, bem como pelas condições brandas para a detoxificação. O objetivo do trabalho foi estudar a ação de carboxipeptidase A nos níveis e na toxicidade de OTA, visando aplicar a técnica para detoxificar farinhas de trigo. Primeiramente foi estimado o risco de exposição à ocratoxina A pelo consumo de farinhas de trigo. Para isso foram estabelecidas condições de determinação de OTA em farinhas de trigo, empregando técnicas de estatística multivariada para definir os principais interferentes na extração de OTA pelo método de QuEChERS e detecção em CLAE-FL. O método validado permitiu a avaliação da ocorrência natural em 20 amostras de farinha de trigo, estando estas contaminadas na faixa de 0,22 a 0,85 µg.kg-1 , apresentando um valor de ingestão diária de 0,08 ngOTA.dia-1 .kgmassacorpórea -1 e uma disponibilidade de 94,4%. Em seguida foi realizada a padronização da extração de carboxipeptidase A em biomassa de Rhizopus oryzae que consistiu em agitação ultrassônica durante 30 minutos numa potencia fixa de 150 W e 40 kHz e a triagem de agentes biológicos para degradação de OTA. Para o estudo da degradação in vitro de OTA, método de extração e detecção de OTA e OTα em CLAEFL foi validado e o processo de degradação foi realizado com Rhizopus oryzae e Trichoderma reesei, obtendo-se uma redução máxima de 63,5% e 57,7%, respectivamente. A degradação apresentou uma correlação alta (R>0,9) e significativa (p<0,05) com a produção de Otα, indicando que ocorreu a produção de enzimas capazes de hidrolisar a micotoxina, por exemplo, a carboxipeptidase A. O estudo da toxicidade de OTA e seu metabólito OTα foi realizado em neutrófilos humanos, onde foi observado a ausência de efeito tóxico de OTα. Também foi determinado o mecanismo de toxicidade de OTA pelo aumento de Ca2+ intracelular pela liberação a partir das reservas internas. Esta liberação, subsequentemente, provoca uma cascata de eventos, nomeadamente: a produção de espécies reativas, depleção de ATP, perda de ΔΨm, levando à morte por necrose. Para reduzir o risco de exposição à micotoxina pela ingestão de matéria prima contaminada, carboxipeptidase A extraída de diferentes fontes foi aplicada na hidrólise de OTA em farinha de trigo para posterior determinação do conteúdo residual de OTA e OTα, empregando método validado. O estudo mostrou uma redução de OTA entre 16,8 e 78,5% e produção de OTα entre 2 a 8,2 ng.g-1 . As carboxipeptidases mais promissoras para degradação foram as provenientes de Rhizopus e Trichoderma e a carboxipeptidase comercial. Ficou demonstrado que se pode recomendar a aplicação de enzimas proteolíticas, tipo carboxipeptidase, para reduzir o risco de exposição à micotoxina quando utilizada matéria prima contaminada, por exemplo, farinha de trigo para diferentes processos. A transformação de OTA para OTα e seus efeitos na redução da toxicidade da micotoxina corroboram com esta afirmação.

First-episode psychosis in a 15 year-old female with clinical presentation of anti-NMDA receptor encephalitis: a case report and review of the literature

BACKGROUND: Anti-NMDA receptor encephalitis is an autoimmune disease that was identified in 2007, and manifests in a stepwise manner with psychiatric, neurological and autonomic symptoms. The disease is caused by autoantibodies against NMDA receptors. It can have a paraneoplastic origin, mainly secondary to ovarian teratomas, but it can also be unrelated to the tumor. This disease can affect both sexes and all ages. CASE PRESENTATION: Here, we present a case of a 15 year-old female adolescent with first-episode psychosis with anti-NMDA receptor encephalitis not related to tumor, which manifested with delusion, hallucinations, panic attacks, agitation, and neurological symptoms, and later with autonomic instability. She was treated with immunotherapy and psychiatric medication resulting in improvement of her main psychiatric and neurological symptoms. CONCLUSION: Our main objective in presenting this case is to alert clinicians to this challenging and recent disease that has a clinical presentation that might resemble a functional psychiatric condition and can be underdiagnosed in the context of child and adolescent psychiatry

Safety and risk factors for difficult endoscopist-directed ERCP sedation in daily practice: a hospital-based case-control study

Background: There are limited data concerning endoscopist-directed endoscopic retrograde cholangiopancreatography deep sedation. The aim of this study was to establish the safety and risk factors for difficult sedation in daily practice. Patients and methods: Hospital-based, frequency matched case-control study. All patients were identified from a database of 1,008 patients between 2014 and 2015. The cases were those with difficult sedations. This concept was defined based on the combination of the receipt of high-doses of midazolam or propofol, poor tolerance, use of reversal agents or sedation-related adverse events. The presence of different factors was evaluated to determine whether they predicted difficult sedation. Results: One-hundred and eighty-nine patients (63 cases, 126 controls) were included. Cases were classified in terms of high-dose requirements (n = 35, 55.56%), sedation-related adverse events (n = 14, 22.22%), the use of reversal agents (n = 13, 20.63%) and agitation/discomfort (n = 8, 12.7%). Concerning adverse events, the total rate was 1.39%, including clinically relevant hypoxemia (n = 11), severe hypotension (n = 2) and paradoxical reactions to midazolam (n = 1). The rate of hypoxemia was higher in patients under propofol combined with midazolam than in patients with propofol alone (2.56% vs. 0.8%, p < 0.001). Alcohol consumption (OR: 2.674 [CI 95%: 1.098-6.515], p = 0.030), opioid consumption (OR: 2.713 [CI 95%: 1.096-6.716], p = 0.031) and the consumption of other psychoactive drugs (OR: 2.015 [CI 95%: 1.017-3.991], p = 0.045) were confirmed to be independent risk factors for difficult sedation. Conclusions: Endoscopist-directed deep sedation during endoscopic retrograde cholangiopancreatography is safe. The presence of certain factors should be assessed before the procedure to identify patients who are high-risk for difficult sedation.

A Irrequietude motora como expressão de uma função materna comprometida: Método Rorschach

Dissertação de Mestrado apresentada ao Instituto Superior de Psicologia Aplicada para obtenção de grau de Mestre na especialidade de Psicologia Clínica.

Obtenção de polímeros de LCC para aplicação como antioxidante de biodiesel de soja

Biodiesel is a fuel obtained from vegetable oils, such as soy, castorbean, among others. The monoester of fatty acid of these oils have chains with mono, di and tri double connections. The presence of these insaturations are susceptible to oxidization. Antioxidants are substances able to prevent oxidization from oils, fats, fat foods, as well as esters of Alquila( biodiesel). The objective of this work is to summarize a new antioxidant from the Cashew Nut Shell Liquid (CNSL) using the electrolysis technique. A current of 2 amperes was used in a single cell of only one group and two eletrodos of stainless steel 304 in a solution of methanol, together with the eletrolits: acetic acid, sodium chloride and sodium hydroxide, for two hours of agitation. The electrolysis products are characterized by the techniques of cromatography in a thin layer, spectroscopy of infrared and gravimetric analysis. The material was submitted to tests of oxidative stability made by the techniques of spectropy of impendancy and Rancimat (EN 14112). The analyses of characterization suggest that the polimerization of the electrolytic material ocurred. The application results of these materials as antioxidants of soy biodiesel showed that the order of the oxidative stability was obtained by both techniques used

Síntese de zeólitas e argilas ácidas pilarizadas a partir de matérias primas naturais

Structural changes in waste for zeolites synthesis are subject of many studies carried out in the synthesis of molecular sieves. These materials are named molecular sieves because they have well defined pore sizes and they have the capacity of select molecules by its size. In this work, it was studied the synthesis processes of two types of molecular sieves: pillared acid clays using as starting material one natural montmorillonite clay and the synthesis of zeolites from a silico-aluminous residue. This residue is a byproduct of the extraction of lithium -spodumene. The preparation of pillared acid clays was performed in two steps: 1° acid treatment of clay samples (time and temperature studies) and 2°pilarization of them with Al13 (Keggin ion). The temperature and acid concentration affect the removal of cations in the structure and porosity of the material obtained. The analysis of X-ray diffraction (XRD) and infrared spectroscopy (IR), showed that increasing the severity of the acid treatment compromises the structural material. Also the pore size distribution is approximately uniform. Despite presenting a structural disorganization, the samples were pillared. As evidenced by XRD increasing the basal spacing, specific area and uniform porosity by adsorption of N2. Regarding the microporous molecular sieves were synthesized zeolites A and NaP1 from a silico-aluminous residue, a byproduct of extracting lithium. The temperature and time of agitation during the synthesis were the most important factors for obtaining zeolite A. The aging of the gel and the highest crystallization time promoted the formation of zeolite NaP1 using a Si / Al ratio = 3.2

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Dispersive liquid–liquid microextraction for metals enrichment: A useful strategy for improving sensitivity of laser-induced breakdown spectroscopy in liquid samples analysis

A rapid and efficient Dispersive Liquid–Liquid Microextraction (DLLME) followed by Laser-Induced Breakdown Spectroscopy detection (LIBS) was evaluated for simultaneous determination of Cr, Cu, Mn, Ni and Zn in water samples. Metals in the samples were extracted with tetrachloromethane as pyrrolidinedithiocarbamate (APDC) complexes, using vortex agitation to achieve dispersion of the extractant solvent. Several DLLME experimental factors affecting extraction efficiency were optimized with a multivariate approach. Under optimum DLLME conditions, DLLME-LIBS method was found to be of about 4.0–5.5 times more sensitive than LIBS, achieving limits of detection of about 3.7–5.6 times lower. To assess accuracy of the proposed DLLME-LIBS procedure, a certified reference material of estuarine water was analyzed.

Evaluation of cross-linked enzyme aggregates of Lactobacillus cell-envelope proteinases, for protein degradation

Enzymatic hydrolysis is a widely used approach to improve the functional, nutritionaland physiological properties of food proteins. In this study, cross-linked enzyme aggre-gates (CLEAs) have been prepared from cell-envelope proteinases (CEPs) of Lactobacillusdelbrueckii subsp. lactis 313 and their proteolytic properties have been evaluated using severalfood proteins. We have optimized cross-linking conditions including ammonium sulphateconcentration, incubation temperatures, agitation speed, glutaraldehyde cross-linker con-centration, reaction time and the addition of proteic feeders. Particularly, the presence ofBSA improves retained activity of cross-linked CEP aggregates (CLCEPAs) from 21.5% to 40.9%.Blocking unreacted cross-linking groups on aggregates is important to enhance recyclabil-ity of CLCEPAs. CLCEPAs had attractive thermal stability at 50◦C and it showed enhancedcatalytic activity over long-term storage after lyophilization. We have demonstrated thatCLCEPAs has proteolytic properties on different food proteins including complex (chickenegg albumin, skimmed-milk protein), fractionated (bovine casein, whey protein isolate), andpurified (bovine serum albumin) proteins. Being the first report of CLEAs from lactobacilliCEPs, this study demonstrates the feasibility of using LDL 313 CLCEPAs for degradation ofvarious food proteins.

Trajectory of sedation assessment and sedative use in intubated and ventilated patients in intensive care: a clinical audit

Background: Sedation is crucial for the recovery of patients in intensive care units (ICUs). Maintaining comfort and safety promotes optimal care for critically ill patients. Purpose: To examine sedation assessment and management undertaken by health professionals for mechanically ventilated patients in one Australian ICU. Methods: A retrospective clinical audit was undertaken of medical records of all eligible, mechanically ventilated patients admitted to an ICU of an Australian metropolitan, teaching hospital over a 12-month period. A Sedation Audit Tool was used to collect data from the day of intubation to 5 days after intubation. Findings: Data were extracted from medical records of 150 patients. The Riker Sedation-Agitation Scale (SAS) was the scoring system used. Patients were unarousable or very sedated between 57% and 81% at some point during the study period, while between 5% and 11% were agitated, very agitated or extremely agitated across this time. Patients' sedation scores were not documented in between 3.3% and 23.3% of patients. Medications commonly used were propofol, midazolam, morphine, and fentanyl. There were 135 situations of adverse events, which related to patients pulling endotracheal tubes leading to malpositioning, patients biting endotracheal tubes causing desaturation, patient experiencing excessive agitation requiring restraint use, patients experiencing increased intracranial pressure above desired limits, patients self-extubating, and patients experiencing over-drowsiness leading to delays in extubation. Conclusions: Many patients were either very sedated or agitated at some point during the study period, and some patients experienced adverse outcomes associated with sedation practices. The findings inform future quality initiatives to improve sedation practices.

Specific mood symptoms confer risk for subsequent suicidal ideation in bipolar disorder with and without suicide attempt history: multi-wave data from STEP-BD

BACKGROUND: Little is known about specific mood symptoms that may confer risk for suicidal ideation (SI) among patients with bipolar disorder (BD). We evaluated prospectively whether particular symptoms of depression and mania precede the onset or worsening of SI, among adults with or without a history of a suicide attempt. METHODS: We examined prospective data from a large (N = 2,741) cohort of patients participating in the Systematic Treatment Enhancement Program for BD (STEP-BD). We evaluated history of suicide attempts at baseline, and symptoms of depression and mania at baseline and follow-up visits. Hierarchical linear modeling tested whether specific mood symptoms predicted subsequent levels of SI, and whether the strength of the associations differed based on suicide attempt history, after accounting for the influence of other mood symptoms and current SI. RESULTS: Beyond overall current depression and mania symptom severity, baseline SI, and illness characteristics, several mood symptoms, including guilt, reduced self-esteem, psychomotor retardation and agitation, increases in appetite, and distractibility predicted more severe levels of subsequent SI. Problems with concentration, distraction, sleep loss and decreased need for sleep predicted subsequent SI more strongly among individuals with a suicide attempt history. CONCLUSIONS: Several specific mood symptoms may confer risk for the onset or worsening of SI among treatment-seeking patients with BD. Individuals with a previous suicide attempt may be at greater risk in part due to greater reactivity to certain mood symptoms in the form of SI. However, overall, effect sizes were small, suggesting the need to identify additional proximal predictors of SI.

Liquid phase adsorption kinetics and equilibrium of toluene by novel modified-diatomite

The adsorption equilibria of toluene from aqueous solutions on natural and modified diatomite were examined at different operation parameters such as pH, contact time, initial toluene concentration was evaluated and optimum experimental conditions were identified. The surface area and morphology of the nanoparticles were characterized by SEM, BET, XRD, FTIR and EDX analysis. It was found that in order to obtain the highest possible removal of toluene, the experiments can be carried out at pH 6, temperature 25°C, an agitation speed of 200 rpm, an initial toluene concentration of 150 mg/L, a centrifugal rate of 4000 rpm, adsorbent dosage = 0.1 g and a process time of 90 min. The results of this work show that the maximum percentage removal of toluene from aqueous solution in the optimum conditions for NONMD was 96.91% (145.36 mg/g). Furthermore, under same conditions, the maximum adsorption of natural diatomite was 71.45% (107.18 mg/g). Both adsorption kinetic and isotherm experiments were carried out. The experimental data showed that the adsorption follows the Langmuir model and Freundlich model on natural and modified diatomite respectively. The kinetics results were found to conform well to pseudo-second order kinetics model with good correlation. Thus, this study demonstrated that the modified diatomite could be used as potential adsorbent for removal of toluene from aqueous solution.

Aerobic fermentation of saccharomeyes cerevisae in a miniature bioreactor made of low cost poly(methylmethacrylate) (PMMA) and poly(Dimethylsiloxane) (PDMS) polymers

In this paper, a minibioreactor platform made of low cost polymers is presented. The minibioreactor prototype was designed as an alternative solution for carrying out microbial fermentation experiments in laboratory. The minibioreactor prototype has a working volume of 1.5 mL and was fabricated from poly(methylmethacrylate) (PMMA) and poly(dimethylsiloxane) (PDMS) polymers. Cell density was measured online whilst agitation rates and the temperature of the reactor content can be tightly controlled to desired set-point values. As proof-of-concept, various S. cerevisae fermentation experiments were conducted. In every experiment, the minibioreactor operated stably for the entire length of operation which was nearly 40 h with very minimal volume loss i.e. about 2.8 μ·h-1 at 37°C. The minibioreactor has the maximum oxygen transfer rate (OTR) of 16.6 mmol·L-1·h-1 under the agitation rate of 300 rpm. Under these conditions, cell specific growth rate as high as 0.291 h-1 was obtained. The experimental data in the minibioreactor operation was also reproducible using shake flask where similar growth profiles were attained under a similar growth conditions.

Production of Recombinant Trichoderma Reesei Endoglucanase Protein CEL7B by Using Kluyveromyces Lactis

This research is about producing recombinant Trichoderma reesei endoglucanase Cel7B by using Kluyveromyces lactis, transformed with chromosomally integrated Cel7B cDNA, as a host cell (K. lactis Cel7B). Cel7B is one of the glycoside hydrolyze family of proteins that are produced by T. reesei. Cel7B together with other endoglucanases, exoglucanases, and â-glucosidases hydrolyze cellulose to glucose, which can then be fermented to biofuels or other value-added products. The research objective of this MS project is to examine favorable fermentation conditions for recombinant Cel7B enzyme production and improved activity. Production of enzyme on different types of media was examined, and the activity of the enzyme was measured by using different tools or procedures. The first condition tested for was using different concentrations of galactose as a carbon and energy source; however galactose also acts as a potent promoter of recombinant Cel7B expression in K. lactis Cel7B. The purpose of this method is to determine the relationship between production of enzyme with increasing sugar concentration. The second culture condition test was using different types of media: a complex medium-yeast extract, peptone, galactose (YPGal); a minimal medium-yeast nitrogen base (YNB) with galactose; and a minimal medium with supplement-yeast nitrogen base with casamino acid (YBC), a nitrogen source, with galactose. The third condition was using different types of reactors or fermenters: a small reactor (shake flask) and a larger automated bioreactor (BioFlo 3000 fermenter). The purpose of this method is to determine the quantity of the protein produced by using different environments of production. Different tools to determine the presence and activity of Cel7B enzyme were used. For the presence of enzyme, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was used. Secondly, to detect enzyme activity, the carboxymethyl cellulose- 3,5-dinitrosalicylic acid (CMC- DNS) assay was employed. SDS-PAGE showed that the enzyme band was at 67 kDa, which is larger than native Cel7B (52 kDa.), likely due to over glycolylation during post-translational processing in K. lactis. For the different types of media used in our fermentation, recombinant Cel7B was produced from yeast extract peptone galactose (YPGal), and yeast nitrogen base with casamino acid (YBC), but was not produced and no activity was detected from yeast nitrogen base (YNB). This experiment concluded that the Cel7B production requires the amino acid resources as part of fermentation medium. In experiments where recombinant Cel7B net activity was measured at 1% galactose initial concentration in YPGal and YBC media, higher enzyme activity was detected for the complex medium YPGal. Higher activity of recombinant Cel7B was detected for flask culture in 2% galactose compared to 1% galactose for YBC medium. Two bioreactor experiments were conducted under these culture conditions at 30°C, pH 7.0, dissolved oxygen of 50% of saturation, and 250 rpm agitation (variable depending on DO control) K. lactis-Cel7B yeast growth curves were quite reproducible with maximum optical density (O.D) at 600 nm of between 7 and 8 (when factoring dilution of 10:1). Galactose was consumed rapidly during the first 15 hours of bioreactor culture and recombinant Cel7B started to appear in the culture at 10-15 hours and increased thereafter up to a maximum of between 0.9 and 1.6 mg/mL/hr in these experiments. These bioreactor enzyme activity results are much higher than comparable experiments conducted with flask-scale culture (0.5 mg/mL/hr). In order to achieve the highest recombinant Cel7B activity from batch culture of K. lactis-Cel7B, based on this research it is best to use a complex medium, 2% initial galactose concentration, and an automated bioreactor where good control of temperature, pH, and dissolved oxygen can be achieved.