Estudo da velocidade de despassivação de aços em estruturas de concreto armado, em meio de cloreto

The aim of the present study was to investigate the corrosion resistance in chloride medium of two cylindrical steel samples from civil construction (CA-50 and CA-60). For this purpose, electrochemical measurements were performed in NaCl solution, 4.0 g/L, naturally aerated. According to electrochemical responses, it was observed an active dissolution process at open circuit potential for both steels. In this comparative study, the differences between CA-50 and CA60 were not significant, since the values of polarization resistance estimated by EIS were the same order of magnitude for both types of steel (oscillating between 200 and 500 Ohm). For all evaluated thicknesses of concrete reinforcement, these values ranged between 2 and 9 kOhm, and the lower value was associated with lower thickness, particularly at 7, 21 and 35 days. When these results were compared with those determined for the CA-60, it was found that the layer of concrete reinforcement provide a protection against corrosion in chloride medium at least ten times larger

Reconfiguração de sistemas de distribuição operando em vários níveis de demanda através de uma meta-heurística de busca em vizinhança variável

Pós-graduação em Engenharia Elétrica - FEIS

Estimation methods of reference evapotranspiration (ETo) for Uberlândia -MG

One approach to verify the adequacy of estimation methods of reference evapotranspiration is the comparison with the Penman-Monteith method, recommended by the United Nations of Food and Agriculture Organization - FAO, as the standard method for estimating ET0. This study aimed to compare methods for estimating ET0, Makkink (MK), Hargreaves (HG) and Solar Radiation (RS), with Penman-Monteith (PM). For this purpose, we used daily data of global solar radiation, air temperature, relative humidity and wind speed for the year 2010, obtained through the automatic meteorological station, with latitude 18° 91' 66 S, longitude 48° 25' 05 W and altitude of 869m, at the National Institute of Meteorology situated in the Campus of Federal University of Uberlandia - MG, Brazil. Analysis of results for the period were carried out in daily basis, using regression analysis and considering the linear model y = ax, where the dependent variable was the method of Penman-Monteith and the independent, the estimation of ET0 by evaluated methods. Methodology was used to check the influence of standard deviation of daily ET0 in comparison of methods. The evaluation indicated that methods of Solar Radiation and Penman-Monteith cannot be compared, yet the method of Hargreaves indicates the most efficient adjustment to estimate ETo.

Contribuição ao estudo do desgaste de bedames na usinagem de ligas de alumínio-silício

Pós-graduação em Engenharia Mecânica - FEIS

Efeito do intervalo entre sessões de exercício de força sobre o desempenho neuromuscular

Introduction: The rest interval between bouts is a crucial variable of resistance training to ensure recovery of neuromuscular capacity. Objective: To compare the effect of rest interval between repeated bouts of resistance training on neuromuscular capacity of trained men. Methods: Eight resistance-trained men (21.6 +/- 3.3 years, 75.1 +/- 11.3 kg, 178.2 +/- 6.8 cm) performed two randomized and crossover resistance exercise bouts, repeated with rest interval of 24h or 48h. The bouts consisted of horizontal, inclined and declined bench press performed with five sets of 10 repetitions with an intensity of 70% of one repetition maximum (1RM) for each exercise. Neuromuscular performance post-exercise bout (strength, power and speed), was assessed with an accelerometer (Myotest (R)), with a load of 50% 1RM, in the bench press exercise. Results: Both sessions (24 and 48h) showed significant reduction (P < 0.05) in the neuromuscular capacity (strength, power and speed) post-exercise bout, returning to baseline values within 24h (P> 0.05). Conclusion: The results suggest that the rest interval of 24h is sufficient for recovery of neuromuscular performance in upper limbs of resistance-trained men.

Complexidade do ambiente e assimetria no andar de idosos com doença de Parkinson

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A articulação do quadril em uma perspectiva preditora da velocidade de marcha em idosas e como foco de intervenção de duas modalidades terapêuticas: Método Pilates e Haste Vibratória

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise experimental da resistência à corrosão e da velocidade de corrosão: uma proposta pedagógica

In this work it is proposed the use of a chemical activity, in which a corrosion process occurs, aiming to provide to the student relationship among the learning concepts and corrosion phenomena that occur everyday. It is suggested that the experiment development is based on Vygotsky theory, so that students work in groups, which may facilitate social interaction among students and results discussion among groups under professor guidance. This proposal can provide the involved concepts learning, as well as student training such as a critical and reflexive individual.

Relação dos saltos vertical, horizontal e sêxtuplo com a agilidade e velocidade em crianças

The aim of the present study were: 1) To verify the relationship of vertical, horizontal and sextuple jumps with agility and velocity of 5, 10 and 25 m; 2) To verify the capacity of these jumps to predict the agility and 5, 10 and 25 m velocity performance in children. Twenty eight boys (9.47 ± 0.64 years) and thirty girls (9.69 ± 0.70 years) were evaluated. The correlation values between agility and velocity on 5, 10 and 25 m velocity were, respectively, r = 0.63, 0.51, 0.44 and 0.64 with vertical jump, r = 0.68, 0.62, 0.28 and 0.62 with sextuple jump, and r = 0.60, 0.50, 0.26 and 0.57 with horizontal jump. The vertical and sextuple jumps were able to predict the agility and 25 m velocity performance (p < 0.05). Furthermore, they demonstrated capacity to predict 5 and 10 m velocity, respectively (p < 0.05). The vertical and sextuple jump tests may be used for assessment and control of training with children practicing activities that require agility and velocity, since both jumps predicted the agility and velocity performance, which did not occur with the horizontal jump.

Influência do treinamento aeróbico intradialítico no fluxo sanguíneo cerebral e o reflexo sobre a função cognitiva e qualidade de vida em pacientes renais crônicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade da operação de semeadura de uma semeadora adubadora de plantio direto em função do tipo de martelete e velocidade de deslocamento

The current paper had as its objective to analyze the precision planter's operational performance according to five different displacement velocities and two types of jumpers for planting no-tillage corn. The utilized experimental delineation consisted of blocks at random with parcels subdivided in factorial scheme 2x5, two types of jumpers (4 and 5 staples) and five different displacement velocities (3.0; 4.5; 5.0; 7.0 e 9.0 km h-1) with four repetitions and by applying the average comparation test, as for the jumpers effects as for the displacement velocities effects, to the significance level of 5%. It was evaluated the data concerned to the longitudinal distribution of plants, average number of days for the emergence of seedlings, initial and final stand of plants, survival indices, mechanical harm on seeds, germination tests and grain production. It was also observed the planter displacement velocity effect of on variables as: longitudinal distribution of plants, average number of days for the emergence of seedlings, initial and final stand of plants, mechanical harm and yield. The survival indice of plants were high for all the studied velocities and jumpers. Among the studied velocities, the one of 5.0 km h-1 presented the highest yield to both types of jumpers.

Aplicação da teoria fuzzy no controle de sistemas de geração de energias alternativas

This paper presents the application and use of a methodology based on fuzzy theory and simulates its use in intelligent control of a hybrid system for generating electricity, using solar energy, photovoltaic and wind. When using a fuzzy control system, it reached the point of maximum generation of energy, thus shifting all energy generated from the alternative sources-solar photovoltaic and wind, cargo and / or batteries when its use not immediately. The model uses three variables used for entry, which are: wind speed, solar radiation and loading the bank of batteries. For output variable has to choose which of the batteries of the battery bank is charged. For the simulations of this work is used MATLAB software. In this environment mathematical computational are analyzed and simulated all mathematical modeling, rules and other variables in the system described fuzzy. This model can be used in a system of control of hybrid systems for generating energy, providing the best use of energy sources, sun and wind, so we can extract the maximum energy possible these alternative sources without any prejudice to the environment.

Avaliação do tempo de resposta de um controlador de fluxo com DGPS submetido à variação de velocidade de voo em condições de voo simulado em laboratório

The application of pesticides is one of the most important steps in the agricultural production process. The spray volume can directly affect application success, and this parameter is directly dependent on the displacement speed of the sprayer. In conventional systems, the operator has to maintain a constant speed to ensure uniform application along the tracks. In order to improve over application quality and preserve levels of precision for applied doses; the use of electronic flow control systems allows for automatic adjustment of volume applied over the area when there is a change in velocity during application. The objective of this research was to study the response times of a flow controller with DGPS for aerial application subjected to variations of velocity in laboratory simulated flight conditions. For this purpose, a bench test has been developed including software for simulating DGPS signals, which was used to simulate different flight speeds and conditions. The results showed the average response time from the flow controller to a change in velocity to be between 6 and 20 seconds. Variations in total flow and the controller setting had a significant influence on response time with situations where there was interaction between the factors being evaluated. There was a tendency for better response times using a constant setting for the control algorithm other than that specified by the manufacturer. The flow controller presented an average error rates below 2% in all evaluated operating conditions, providing satisfactory accuracy in determining the output of product in different test situations.

Mobilização do solo, velocidade de infiltração de água e taxa de cobertura do solo na grama esmeralda, sob manejos mecanizados

The excessive compaction of the soil observed in sod production systems, affects the physical attributes of the soil, which can influence the water infiltration into the soil and hence the rate of soil cover by turfgrasses and time of the sod production. To minimize the effects of soil compacting, some producers use soil preparation equipment that raises the soil on the surface but does not cause excessive roughness which may harm the quality of the sod. Thus, the aim of the present study was to evaluate the infiltration rate and soil cover rate due to different management mechanized in the zoysiagrass sod production. The experimental design had random plots and four replications. The treatments consisted of five mechanized managements of soil: witness (without the use of equipment); coulter blade disc harrow used once (1CB), coulter blade disc harrow used twice (2CB), surface chisel used once (1C), surface chisel and coulter blade disc harrow used once (1C + 1CB). The treatments with 2CB and 1C + 1CB provided greater basic water infiltration speed in the soil and higher rate of soil cover by the turfgrass. The rate of soil cover by turfgrass is positively correlated with water infiltration rate at 133 and 226 DAP, demonstrating the influence of managements used in zoysiagrass sod production and the increment in the infiltration rate of water. Soil preparation utilizing coulter blade disc harrow used twice or surface chisel and coulter blade disc harrow used once is recommended under the conditions this study was done.

O uso variável das construções condicionais em contextos de aquisição de tradições discursivas da escrita

Pós-graduação em Estudos Linguísticos - IBILCE