Towards generalized Doherty power amplifier design for multiband operation

This paper presents a new variant of broadband Doherty power amplifier that employs a novel output combiner. A new parameter ∝ is introduced to permit a generalized analysis of the recently reported Parallel Doherty power amplifier (PDPA),and hence offer design flexibility. The circuit prototype of the new DPA fabricated using GaN devices exhibits maximum drain efficiency of 85% at 43-dBm peak power and 63% at 6-dB backoff power (BOP). Measured drain efficiency of >60% at peak power across 500-MHz frequency range and >50% at 6-dB BOP across 480-MHz frequency range were achieved, confirming the  theoretical wideband characteristics of the new DPA.

TRP Channels and calcium signalling in dental pulp stem cells

Introduction: Ca2+ ion is an important intracellular messenger essential for the regulation of various cellular functions including proliferation, differentiation and apoptosis. Transient Receptor Potential (TRP) channels are calcium permeable cationic channels that play important role in regulation of free intracellular calcium ([Ca2+]i) in response to thermal, physical and chemical stimuli. Ca2+ signalling in human dental pulp stem cells (hDPSCs) and the ion channels regulating Ca2+ are largely not known. Objectives: Investigate changes in [Ca2+]i and determine the ion channels that regulate calcium signalling in hDPSCs. Methods: DPSCs were derived from immature third molars and cells less than passage 6 were used in all the experiments. Changes in [Ca2+]i were studied with Fura2 calcium imaging. RNA was extracted from DPSCs and a panel of TRP channel gene expression was determined by qPCR employing custom designed FAM TRP specific primers and probes (Roche, UK) and the Light Cycler 480 Probes Master (Roche). Results: hDPSCs express gene transcripts for all TRP families including TRPV1, V2, V4, TRPA1, TRPC3, TRPC5, TRPC6, TRPM3, TRPM7 and TRPP2. Stimulation of cells with appropriate TRP channel agonist induced increase in [Ca2+]i and similar responses were obtained when cell were mechanically stimulated by membrane stretch with application of hypotonic solution. Conclusion: TRP channels mediate calcium signalling in hDPSCs that merit further investigation.

Human odontoblasts express functional TRPV2 channels

Background: The transient receptor potential (TRP) ion channels play a critical role in sensory physiology, where they act as transducers of thermal, mechanical and chemical stimuli. We have previously shown the functional expression of several TRP channels by human odontoblast-like cells and proposed their significance in odontoblast sensory perception. Functional expression of the mechano-sensitiveTRPV2 channel by human odontoblasts would further support a role for TRP channels in odontoblast physiology. Objective: The objective of the current study was to determine the functional expression of TRPV2 by human odontoblasts. Methods: Human dental pulp cells were cultured in the presence of 2 mM β-glycerophoshate to induce an odontoblast phenotype. TRPV2 gene expression was determined by qPCR employing custom designed FAM TRPV2 specific primers and probes (Roche, UK) and the Light Cycler 480 Probes Master (Roche). TRPV2 protein expression was determined following SDS-PAGE and Western blotting of cell lysate preparations. Functional expression of TRPV2 was investigated by Ca2+ microfluorimetry. Results: qPCR data indicated robust expression of TRPV2 in odontoblast-like cells. Western blotting revealed a discrete immunoreactive protein band indicating expression of TRPV2 in cell lysates. In functional assays, the chemical agonist of TRPV2, cannabidiol, was shown to elicit [Ca2+]i transients, that were reduced to baseline in the presence of the TRPV2 antagonist Tranilast, suggesting channel functionality in odontoblast-like cells. Conclusion: These results provide the first evidence for the functional expression of TRPV2 in human odontoblast-like cells, providing further support for the role of TRP channels in odontoblast physiology.

Lipopolysaccharide modification in Gram-negative bacteria during chronic infection

The Gram-negative bacterial lipopolysaccharide (LPS) is a major component of the outer membrane that plays a key role in host-pathogen interactions with the innate immune system. During infection, bacteria are exposed to a host environment that is typically dominated by inflammatory cells and soluble factors, including antibiotics, which provide cues about regulation of gene expression. Bacterial adaptive changes including modulation of LPS synthesis and structure are a conserved theme in infections, irrespective of the type or bacteria or the site of infection. In general, these changes result in immune system evasion, persisting inflammation, and increased antimicrobial resistance. Here, we review the modifications of LPS structure and biosynthetic pathways that occur upon adaptation of model opportunistic pathogens (Pseudomonas aeruginosa, Burkholderia cepacia complex bacteria, Helicobacter pylori and Salmonella enterica) to chronic infection in respiratory and gastrointestinal sites. We also discuss the molecular mechanisms of these variations and their role in the host-pathogen interaction.

Adaptation and Evaluation of the Neighborhood Environment Walkability Scale in India (NEWS-India)

Physical inactivity is the fourth leading risk factor for global mortality, with most of these deaths occurring in low and middle-income countries (LMICs) like India. Research from developed countries has consistently demonstrated associations between built environment features and physical activity levels of populations. The development of culturally sensitive and reliable measures of the built environment is a necessary first step for accurate analysis of environmental correlates of physical activity in LMICs. This study systematically adapted the Neighborhood Environment Walkability Scale (NEWS) for India and evaluated aspects of test-retest reliability of the adapted version among Indian adults. Cultural adaptation of the NEWS was conducted by Indian and international experts. Semi-structured interviews were conducted with local residents and key informants in the city of Chennai, India. At baseline, participants (N = 370; female = 47.2%) from Chennai completed the adapted NEWS-India surveys on perceived residential density, land use mix-diversity, land use mix-access, street connectivity, infrastructure and safety for walking and cycling, aesthetics, traffic safety, and safety from crime. NEWS-India was administered for a second time to consenting participants (N = 62; female = 53.2%) with a gap of 2–3 weeks between successive administrations. Qualitative findings demonstrated that built environment barriers and constraints to active commuting and physical activity behaviors intersected with social ecological systems. The adapted NEWS subscales had moderate to high test-retest reliability (ICC range 0.48–0.99). The NEWS-India demonstrated acceptable measurement properties among Indian adults and may be a useful tool for evaluation of built environment attributes in India. Further adaptation and evaluation in rural and suburban settings in India is essential to create a version that could be used throughout India.

"Rosen, Tulpen, Nelken..." : ein Poesiealbum für die EFH

Ein „Poesiealbum“ für die Evangelische Fachhochschule Hannover.

Can the European low-cost airline boom continue? Implications for regional airports

At a time when the traditional major airlines have struggled to remain viable, the low-cost carriers have become the major success story of the European airline industry. This paper looks behind the headlines to show that although low-cost airlines have achieved much, they too have potential weaknesses and face a number of challenges in the years ahead. The secondary and regional airports that have benefited from low-cost carrier expansion are shown to be vulnerable to future changes in airline economics, government policy and patterns of air service. An analysis of routes from London demonstrates that the low-cost airlines have been more successful in some markets than others. To attractive and historically under-served leisure destinations in Southern Europe they have stimulated dramatic growth and achieved a dominant position. To major hub cities however they typically remain marginal players and to secondary points in Northern Europe their traffic has been largely diverted from existing operators. There is also evidence that the UK market is becoming saturated and new low-cost services are poaching traffic from other low-cost routes. Passenger compensation legislation and possible environmental taxes will hit the low-cost airline industry disproportionately hard. The high elasticities of demand to price in certain markets that these airlines have exploited will operate in reverse. One of the major elements of the low-cost business model involves the use of smaller uncongested airports. These offer faster turn-arounds and lower airport charges. In many cases, local and regional government has been willing to subsidise expansion of air services to assist with economic development or tourism objectives. However, recent court cases against Ryanair now threaten these financial arrangements. The paper also examines the catchment areas for airports with low-cost service. It is shown that as well as stimulating local demand, much traffic is captured from larger markets nearby through the differential in fare levels. This has implications for surface transport, as access to these regional airports often involves long journeys by private car. Consideration is then given to the feasibility of low-cost airlines expanding into the long-haul market or to regional operations with small aircraft. Many of the cost advantages are more muted on intercontinental services.

Embodied perspective-taking indicated by selective disruption from aberrant self motion

Spatial perspective-taking that involves imagined changes in one’s spatial orientation is facilitated by vestibular stimulation inducing a congruent sensation of self-motion. We examined further the role of vestibular resources in perspective-taking by evaluating whether aberrant and conflicting vestibular stimulation impaired perspective-taking performance. Participants (N = 39) undertook either an “own body transformation” (OBT)task, requiring speeded spatial judgments made from the perspective of a schematic figure, or a control task requiring reconfiguration of spatial mappings from one’s own visuo-spatial perspective. These tasks were performed both without and with vestibular stimulation by whole-body Coriolis motion, according to a repeated measures design, balanced for order. Vestibular stimulation was found to impair performance during the first minute post stimulus relative to the stationary condition. This disruption was task-specific, affecting only the OBT task and not the control task, and dissipated by the second minute post-stimulus. Our experiment thus demonstrates selective temporary impairment of perspective-taking from aberrant vestibular stimulation, implying that uncompromised vestibular resources are necessary for efficient perspective-taking. This finding provides evidence for an embodied mechanism for perspective-taking whereby vestibular input contributes to multisensory processing underlying bodily and social cognition. Ultimately, this knowledge may contribute to the design of interventions that help patients suffering sudden vertigo adapt to the cognitive difficulties caused by aberrant vestibular stimulation.

Design of a Multiband Full-Rate Ultra-Wideband Receiver in FPGA

MultiBand OFDM (MB-OFDM) UWB [1] is a short-range promising wireless technology for high data rate communications up to 480 Mbps. In this paper, we have designed and implemented in an Virtex-6 FPGA an MB-OFDM UWB receiver for the highest data rate of 480 Mbps. To test the system, we have also implemented an MB-OFDM transmitter and an AWGN generator in VHDL and determined the bit error rates at the receiver running in an FPGA.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.

Desenvolvimento de métodos de análise físico-química em águas usando um analisador multiparamétrico AQUAKEM

Trabalho Final de mestrado para obtenção do grau de Mestre em Engenharia Química e Biológica

Caracterização física e química de fíleres para fabrico de misturas betuminosas

Mestrado em Engenharia Geotécnica e Geoambiente

Transplantação hepática no C. H. Porto

RESUMO - Contexto: a actividade de transplantação hepática envolve um número considerável de profissionais multidisciplinares e, possui uma alocação de verbas importante do ponto de vista do administrador hospitalar. Estudar e analisar a actividade de transplantação hepática no Centro Hospitalar do Porto (CHP), é por isso, objecto do trabalho. Objectivos: Efectuar uma análise custo/proveito do processo de transplantação hepática para o CHP nos anos de 2010, 2011 e 2012 e, caracterizar a população em estudo com o maior número de variáveis possível. Metodologia: Seleccionou-se para análise os pacientes com o Grupo de Diagnóstico Homogéneo (GDH) 480 que realizaram transplante hepático entre 1 de Janeiro de 2010 até 30 de Junho de 2012 de modo a quantificar os custos e proveitos dos 161 pacientes desde a fase pré-transplante, passando pelo internamento até aos 6 meses após a alta hospitalar da fase pós-transplante. Na análise de custos da fase pré-transplante consideraram-se os custos com recursos humanos (RH) médicos das consultas e o custo com meios complementares de diagnóstico e terapêutica (MCDT’s). Na fase de internamento considerou-se os custos relativos à cirurgia (RH e material de consumo clinico e farmacológico) e diárias de internamento. Para a fase pós-transplante contabilizou-se os custos relativos a RH médicos das consultas, o custo com MCDT’s e fármacos. O apuramento de proveitos decorreu do contrato programa da instituição, da Portaria 839-A/2009 de 31 de Julho para o cálculo pelo peso relativo do transplante hepático, pelo Despacho nº 19964/2008 de 28 de Julho para a comparticipação dos fármacos. Considerou-se ainda o incentivo à transplantação pelos Despachos nº6155/2006, de 15 de Março e nº 10485/2011, de 19 de Agosto. Resultados: Da análise global dos 161 GDH’s o verificado foi um custo total para o CHP de 7.505.518,89euro (um custo médio de 46.618,13euro por paciente). Quanto aos proveitos utilizando o contrato programa do CHP bem como os Despachos relativos ao incentivo à transplantação e à comparticipação de fármacos, existiu proveitos de 7.089.462,77euro (proveito médio de 44.033,93euro). Se o cálculo dos proveitos de internamento fosse pelo peso relativo do transplante hepático os proveitos seriam de 21.834.655,50euro (proveito médio de 135.618,98euro).

An 40Ar/39Ar, Rb/Sr, and stable isotope study of micas in low-grade fold-and-thrust belt: An example from the Swiss Helvetic Alps

White micas in carbonate-rich tectonites and a few other rock types of large thrusts in the Swiss Helvetic fold-and-thrust belt have been analyzed by Ar-40/Ar-39 and Rb/Sr techniques to better constrain the timing of Alpine deformation for this region. Incremental Ar-40/Ar-39 heating experiments of 25 weakly metamorphosed (anchizone to low greenschist) samples yield plateau and staircase spectra. We interpret most of the staircase release spectra result from variable mixtures of syntectonic (neoformed) and detrital micas. The range in dates obtained within individual spectra depends primarily on the duration of mica nucleation and growth, and relative proportions of neoformed and detrital mica. Rb/Sr analyses of 12 samples yield dates of ca. 10-39 Ma (excluding one anomalously young sample). These dates are slightly younger than the Ar-40/Ar-39 total gas dates obtained for the same samples. The Rb/ Sr dates were calculated using initial Sr-87/Sr-86 ratios obtained from the carbonate-dominated host rocks, which are higher than normal Mesozoic carbonate values due to exchange with fluids of higher Sr-87/Sr-86 ratios (and lower O-18/O-16 ratios). Model dates calculated using Sr-87/Sr-86 values typical of Mesozoic marine carbonates more closely approximate the Ar-40/Ar-39 total gas dates for most of the samples. The similarities of Rb/Sr and Ar-40/Ar-39 total gas dates are consistent with limited amounts of detrital mica in the samples. The delta(18)O values range from 24-15%. (VSMOW) for 2-6 mum micas and 27-16parts per thousand for the carbonate host rocks. The carbonate values are significantly lower than their protolith values due to localized fluid-rock interaction and fluid flow along most thrust surfaces. Although most calcite-mica pairs are not in oxygen isotope equilibrium at temperatures of ca. 200-400 degreesC, their isotopic fractionations are indicative of either 1) partial exchange between the minerals and a common external fluid, or 2) growth or isotopic exchange of the mica with the carbonate after the carbonate had isotopically exchanged with an external fluid. The geological significance of these results is not easily or uniquely determined, and exemplifies the difficulties inherent in dating very fine-grained micas of highly deformed tectonites in low-grade metamorphic terranes. Two generalizations can be made regarding the dates obtained from the Helvetic thrusts: 1) samples from the two highest thrusts (Mt. Gond and Sublage) have all of their Ar-40/Ar-39 steps above 20 Ma, and 2) most samples from the deepest Helvetic thrusts have steps (often accounting for more than 80% of Ar-39 release) between 15 and 25 Ma. These dates are consistent with the order of thrusting in the foreland-imbricating system and increase proportions of neoformed to detrital mica in the more metamorphosed hinterland and deeply buried portions of the nappe pile. Individual thrusts accommodated the majority of their displacement during their initial incorporation into the foreland-imbricating system, and some thrusts remained active or were reactivated down to 15 Ma.