青藏高原东部高寒草甸植物δ~(13)C年间变化及其环境分析

植物有机体稳定碳同位素组成受植物生长期间气候环境因子的影响,包含了大量的环境信息。要真正理解植物体同位素组成所包含的环境信息首先要研究植物体同位素组成与环境之间的关系。文章通过分析2002年和2003年青藏高原东部青海省门源县境内隶属于19科41属51种植物叶片的δ~(13)C值,研究高寒草甸植物稳定碳同位素组成的年间变化及其与环境因子的关系,分析影响δ~(13)C值变化的关键因子。结果表明,所测植物的δ~(13)C值分布在一个很小的范围-29.2‰～-24.9‰之间,平均值为-26.9‰,说明所测植物的光合作用均通过C3途径实现,这可能与该研究区较低温度有关。研究发现一年生植物δ~(13)C值明显低于多年生植物,而且一年生和多年生植物δ~(13)C值之间的差异在2002年（t=-3.031,P〈0.01）和2003年（t=-3.567,P〈0.001）均能达到显著性水平,表明多年生植物水分利用效率显著高于一年生植物,能更好的适应该地区寒冷干燥的低温环境。两年间植物δ~(13)C值有明显不同,2003年显著低于2002年（t=6.786,P〈0.001）。通过分析两年间环境因子的变化认为植物叶片δ~(13)C值的年间变化主要是由于降水的变化引起的,随降雨量的增加而降低。不同植物种δ~(13)C值年间变化差别很大,反应了植物对环境变化的不同响应。在植被恢复中应选用植物δ~(13)C值随环境变化存在较大差异的物种,因为此类物种能够采取不同的对策适应该地区环境的变化。

江河源区退化天然草地的恢复及其生态效益分析

根据天然草地退化程度的差异,采用松耙+补播+施肥+封育(退化较严重的草地)、封育+施肥(轻度退化草地)等措施,植物群落物种组成、多样性等特征值及其植被盖度发生明显变化.研究第2年结果表明,物种数封育+施肥处理最高(32种),对照居中(26种),补播+施肥处理最低(13种);多样性指数大小依次为封育+施肥(3.126)、对照(2.819)、补播+施肥(1.494);均匀度指数大小依次为封育+施肥(0.902)、对照(0.865)、补播+施肥(0.582);群落总盖度大小依次为封育+施肥(85.9%)、补播+施肥(79.7%)、对照(72.9%);补播+施肥+封育处理后地上生物量最大(460.65 g/m2),原生植被+封育+施肥处理居中(310.14 g/m2),对照最低(178.96 g/m2);地下生物量大小依次为封育+施肥(6 920.37 g/m2)、补播+施肥(1 458.96 g/m2)、对照(828.91 g/m2);补播+施肥+封育处理优良牧草较对照提高近50倍,杂草类减少82.81%,封育+施肥处理较对照良牧草比例提高48倍,杂草类比例减少80.46%.半人工草地通过灭除杂草和施肥相结合的示范试验表明:单纯进行灭杂,地上生物量减少,灭杂和施肥相结合不仅可提高地上生物量,而且可提高优良牧草的比例;不同处理区土壤养分含量各不相同,其中封育+施肥处理全氮、全碳、有机碳最高,对照居中,补播+施肥较低.

多取代山酮及其糖甙山酮的~1H和~（13）CNMR研究

总结了作者所测定过的多取代酮及其糖甙类衍生物的１Ｈ和13ＣＮＭＲ位移数据．着重就取代基与结构的关系进行了探讨．认为多取代酮１位和８位取代情况直接影响着其他位置的化学位移数值．这一现象可以直接用于该类化合物的结构鉴定．

Effect of imitated global warming on Delta C-13 values in seven plant species growing in Tibet alpine meadows

Open-top chambers were used to estimate the possible effects of global warming on delta C-13 of seven plant species grown in alpine meadow ecosystem. The delta C-13 values of plant species were lower after long-term growth in open-top chambers. In the course of experiment, temperature significantly increased inside the chambers by 4 degrees C. Plant species grown at a lower elevation above sea level had higher delta C-13 values as compared to those grown at a higher elevation. This was in accordance with the effect of open-top chamber on delta C-13 values in plants. Greater availability of CO2 and lower water vapor as indicated by an increase in discrimination against (CO2)-C-13, probably result in more negative delta C-13 values of plants because higher stomatal conductance increases availability of CO2 and causes greater discrimination against (CO2)-C-13. The plant species studied could be the indicator species for testing global warming by the change in carbon isotope ratios at the two growth temperatures.

班公湖带多不杂超大型富金斑岩铜矿床的成岩成矿年代学、岩石学及高氧化岩浆¬流体-成矿作用

Duobuza copper deposit, newly discovered typical gold-rich porphyry copper deposit with superlarge potential, is located in the Tiegelong Mesozoic tectonic -magmatic arc of the southern edge of Qiangtang block and the northern margin of Bangonghu-Nujiang suture. Quartz diorite porphyrite and grandiorite porphyry, occurred in stock, are the main ore-bearing porphyries. As the emplacement of porphyry stock, a wide range of hydrothermal alteration has developed. Within the framework of the ore district, abundant hydrothermal magnetite developed, and the relationship between precipitation of copper and gold and hydrothermal magnetite seems much close. Correspondingly, a series of veinlets and network veinlets occurred in all alteration zones. Therefore, systematic research on such a superlarge high-grade Duobuza gold-rich porphyry copper deposit can fully revealed the metallogenic characteristics of gold-rich porphyry copper deposits in this region, establish metallogenetic model and prospecting criteria, and has important practical significance on the promotion of regional exploration. In addition, this research on it can enrich metallogenic theory of strong oxidation magma-fluid to gold-rich porphyry copper deposit, and will be helpful to understand the metallogenic characteristics in early of subduction of Gangdese arc stages and its entire evolution history of the Qinghai-Tibet Plateau, the temporal and spatial distribution of ore deposits and their geodynamics settings. Northern ore body of Duobuza copper deposit have been controlled with width (north-south) about 100 ~ 400 m, length (east-west) about 1400 m, dip of 200 °, angle of dip 65 °~ 80 °. And controlled resource amount is of 2.7 million tons Cu with grade 0.94% and 13 tons Au with 0.21g/tAu. Overall features of ore body are large scale, higher grade copper, gold-rich. Ore occurred in the body of granodiotite porphyry and quartz diorite porphyrite and its contact zone with wall rock. Through the detailed mapping and field work studies, some typies of alteration are identificated as follows: albitization, biotititation, sericitization, silication, epidotization, chloritization, carbonatization, illitization, kaolinization and so on. The range of alteration is more than 10km2. Wall alteration zone can be divided into potassic alteration, moderate argillization alteration, argillization, illite-hydromuscovite or propylitization from ore-bearing porphyry center outwards, but phyllic alteration has not well developed and only sericite-quartz veins occurred in local area. Moreover, micro-fracture is development in ore district , and correspondingly a series of veinlets are development as follows: biotite vein (EB type), K-feldspar-biotite-chalcopyrite-quartz vein, magnetite-antinolite-K-feldspar vein, quartz-chalcopyrite-magnetite veins (A-type), quartz-magnetite-biotite-K-feldspar vein, chalcopyrite veinlets in potassic alteration zone; (2) chalcopyrite occurring in the center vein–quartz vein (B type), chalcopyrite veinlets, chalcopyrite-gypsum vein in intermediate argillization alteration; (3) chalcopyrite- pyrite-quartz vein, pyrite-quartz vein, chalcopyrite-gypsum veins, quartz-gypsum- molybdenite-chalcopyrite vein in argillization alteration; (4) gypsum veins, quartz-(molybdenite)-chalcopyrite vein, quartz-pyrite vein, gypsum- chalcopyrite vein, potassium feldspar veinlets, Carbonate veins, quartz-magnetite veins in the wall rock. In short, various veins are very abundant within the framework of the ore district. The results of electronic probe microscopy analysis (EMPA) indicate that Albite (Ab 91.5~99.7%) occurred along the rim of plagioclase phenocryst and fracture, and respresents the earliest stages of alteration. K-feldspar (Or 75.1~96.9%) altered plagioclase phenocryst and matrix or formed secondary potassium feldspar veinlets. Secondary biotite occurred mainly in phenocryst, matrix and veinlets, belong to magnesium-rich biotite formed under the conditions of high-oxidation magma- hydrothermal. Chloritization developed in all alteration zones and alterd iron- magnesium minerals such as biotite and hornblende and then formed chlorite veinlets. As the temperature rises, Si in the tetrahedral site of chlorite decreased, and chlorite component evolved from diabantite to ripiolite. The consistent 280℃~360℃ of formation temperature hinted that chlorite formed on the same temperature range in all alteration zones. However, formation temperature range of chlorite from the gypsum-carbonate-chlorite vein was 190℃~220℃, and it may be the product of the latest stage of hydrothermal activity. The closely relationship between biotite and rutile indicate that most of rutiles are precipitated in the process of biotite alteration and recrystallization. In addition, the V2O3 concentration of rutile from ore body in Duobuza gold-rich porphyry copper deposit is >0.4％, indicate that V concentration in rutile has important significance on marking main ore body of porphyry copper deposit. Apatites from Duobuza deposit all are F-rich. And apatite in the wall rock contained low MnO content and relatively high FeO content, which may due to the basaltic composition of the wall rocks. The MnO in apatite from altered porphyry show a strong positive correlation with FeO. In addition, Cl/F ratio of apatite from wall rock was highest, followed by the potassic alteration zone and potassic alteration zone overprinted by moderate argillization alteration was the lowest. SO2 in Apatite are in the scope of 0 to 0.66%, biotite in the apatite has the highest SO2, followed by the potassic alteration zone, potassic alteration zone overprinted by moderate argillization alteration, and the lowest in the surrounding rocks, which may be caused by the decrease of oxygen fugacity of hydrothermal fluid and S exhaust by sulfide precipitation in potassic alteration. Magnetite in the wall rock have higher Cr2O3 and lower Al2O3 features compared with altered porphyry, this may be due to basalt wall rock generally has high Cr content. And magnetites have higher TiO2 content in potassic alteration than moderate argillization alteration overprinted by potassic alteration, argillization and wall rock, suggested that its formation temperature in potassic alteration was the highest among them. The ore minerals mainly are chalcopyrite and bornite, and Au contents of chalcopyrite, bornite, and pyrite are similar with chalcopyrite slightly higher. The Eu* negative anomaly of disseminated chalcopyrite was relatively lower than chalcopyrite in veinlets. Within a drill hole, the Eu* negative anomaly of disseminated chalcopyrite was gradually larger from bottom to top. Magnetite has the same distribution model, with obvious negative Eu* abnormal, and ΣREE in great changes. The gypsum has the highest ΣREE content and the obvious negative anomaly, and biotite obviously has the Eu* abnormal. Based on the petrographic and geochemical characteristics, five series of magmatic rocks can be broadly classified; they are volcanic rocks of the normal island arc, high-Nb basaltic rocks, adakites, altered porphyry and diorite. The Sr, Nd, Hf isotopes and geochemistry of various series of magmatic rock show that they may be the result of mixing between basic magma and various degrees of acid magma coming from lower crust melted by high temperature basic underplating from partial melting of the subduction sediment melt metasomatic mantle wedge. Furthermore S isotope and Pb isotope of the sulfide, ore-bearing porphyries and volcanic rocks indicated ore-forming source is the mantle wedge metasomatied by subduction sediment melt. Oxygen fugacity of magma estimated by Fe2O3/FeO of whole rock and zircon Ce4+/Ce3+ indicated that the oxidation of basalt-andesitic rocks is higher than ore-forming porphyry, and might imply high-oxidation characteristics of underplated basic magma. Its high oxidative mechanism is likely mantle sources metasomatied by subduction sediment magma, including water and Fe3+. And such high oxidation of basaltic magma is conducive to the mantle of sulfides in the effective access to melt. And the An component of dark part within plagioclase phenocryst zoning belong to bytownite (An 74%), and its may be a result of magma composition changes refreshment by basaltic magma injection. SHRIMP zircon U-Pb and LA-ICP-MS zircon U-Pb geochronology study showed that the intrusions and volcanic rocks from Duobuza porphyry copper deposit belong to early Cretaceous magma series (126~105Ma). The magma evolution series are as follows: the earliest diorite and diorite porphyrite → ore-bearing porphyry and barren grandiorite porphyry →basaltic andesite → diorite porphyrite → andesite → basaltic andesite, and magma component shows a evolution trend from intermediate to intermediate-acid to basic. Based on the field evidences, the formation age of high-Nb basalt may be the latest. The Ar-Ar geochronology of altered secondary biotite, K-feldspar and sericite shows that the main mineralization lasting a interval of about 4 Ma, the duration limit of whole magma-hydrothermal evolution of about 6 Ma, and possibly such a long duration limit may result in the formation of Duobuza super-large copper deposit. Moreover, tectonic diagram and trace element geochemistry of volcanic rocks and diorite from Duobuza porphyry copper deposit confirm that it formed in a continental margin arc environment. Zircon U-Pb age of volcanic rocks and porphyry fall in the range of 105~121Ma, and Duobuza porphyry copper deposit locating in the north of the Bangonghu- Nujiang suture zone, suggested that Neo-Tethys ocean still subducted northward at least early Cretaceous, and its closure time should be later than 105 Ma. Three major inclusion types and ten subtypes are distinguished from quartz phenocrysts and various quartz veins. Vapor generally coexisting with brine inclusions, suggest that fluid boiling may be the main ore-forming mechanism. Raman spectrums of fluid inclusions display that the content of vapor and liquid inclusion mainly contain water, and vapor occasionally contain a little CO2. In addition, the component of liquid inclusions mainly include Cl-, SO42-, Na+, K+, a small amount of Ca2+, F-; and Cl- and Na+ show good correlation. Vapor mainly contains water, a small amount of CO2, CH4 and C2H6 and so on. The daughter minerals identified by Laman spectroscopy and SEM include gypsum, chalcopyrite, halite, sylvite, rutile, potassium feldspar, Fe-Mn-chloride and other minerals, and ore-forming fluid belong to a complex hydrothermal system containing H2O-NaCl-KClFeCl2CaCl2. H and O isotopic analysis of quartz phenocryst, vein quartz, magnetite, chlorite and gypsum from all alteration zones show that the ore-forming fluid of Duobuza gold-rich porphyry copper deposit consisted mainly of magmatic water, without addition of meteric water. Duobuza gold-rich porphyry copper deposit formed by the primary magmatic fluid (600-950C), which has high oxidation, ultra-high salinity and metallogenic element-rich, exsolution direct from the magma, and it is representative of the typical orthomagmatic end member of the porphyry continuum. Moreover, the fluid evolution model of Duobuza gold-rich porphyry copper deposit has been established. Furthermore, two key factors for formation of large Au-rich porphyry copper deposit have been summed up, which are ore-forming fluids earlier separated from magma and high oxidation magma-mineralization fluid system.

准噶尔盆地南缘台13井区侏罗系油藏表征与建模

Junggar Basin has a large amount of recoverable reserves, However, due to the unfavorable factors, such as bad seismic data quality, complex structure with many faults and less wells, the exploration of oil and gas is still relatively limited, so advanced theoretical guidance and effective technical supports are desirable. Based on the theories of sedimentology, as well as comprehensive studies of outcrops, seismic data, drilling data and setting of this area, the paper establishes the isochronous correlation framework, and analyzes the sedimentary facies types and provenance direction, and obtains the profile and plain maps of the sedimentary facies combined with the logging constrained inversion. Then the paper analyzes the reservoir controlling factors, reservoir lithology attribute, 4-property relationship and sensibility based on the sedimentary facies research, and sets up a 3D geological model using facies controlled modeling. Finally, the paper optimizes some target areas with the conclusions of reservoir, structure and reservoir formation.Firstly, the paper establishs the isochronous correlation framework by the seismic data, drilling data and setting of this area. The sedimentary facies in Tai13 well block are braided river and meandering river according to the analysis of the lithology attribute, logging facies and sedimentary structure attribute of outcrop. The concept of “wetland” is put forward for the first time. The provenance direction of Badaowan and Qigu formation is obtained by the geology setting, sedimentary setting and paleocurrent direction. The paper obtains the profile and plain maps of the sedimentary facies from the sand value of the wells and the sand thickness maps from the logging constrained inversion. Then, this paper takes characteristics and control factors of the Jurassic reservoirs analysis on thin section observation, scanning transmission electron microscope observation and find out the petrology characteristics of reservoir, space types of reservoir and lithofacies division. In this area, primary pores dominate in the reservoir pores, which believed that sedimentation played the most important roles of the reservoir quality and diagenesis is the minor factor influencing secondary porosity. Using stochastic modeling technique，the paper builds quantitative 3-D reservoir Parameter. Finally, combined the study of structure and reservoir formation, the reservoir distribution regularity is concluded: (a) structures control the reservoir formation and accumulation. (b) Locating in the favorable sedimentary facies belt. And the area which meets these conditions mentioned above is a good destination for exploration.

13万年以来黄土高原东缘与捷克的风成沉积序列

The loess-paleosols in the Chinese loess plateau and Europe are the main eolian sediment sequences in mid-latitude area of north hemisphere. They record not only the paleoclimatic and paleoenvironmental processes since the last interglacial, but also the configuration of magnetic field during polarity transition. Comparisons of environmental magnetism, paleomagnetism and climate proxy analysis has been made for the loess/paleosol sequences in Datong and Czech Republic. The Datong loess/paleosol sequence is composed of the Holocene soil SO, the last glacial loess LI, the last interglacial soil SI and the upper penultimate loess L2. A basalt layer occurs in L2. The main magnetic minerals in LI and SI are magnetite, maghemite and ilmenite. The presence of local volcanic elastics in the loess and the characteristics of the magnetic minerals indicate that there are local materials in Datong loess, which differentiate the Datong loess from the central and eastern loess of the Chinese Loess Plateau. In addition, there are four polarity events in Datong loess, which are generally consistent with Gothenburg> Mono Lake, Laschamp and Blake events. Some signals of the East Asia monsoon were recorded in the Datong loess/paleosol sequences. Magnetic susceptibility, the content of >63um grains and the organic matter are used as climate proxies, which are similar to those of the typical eolian sediments in the loess plateau. In addition, it is possible that the Datong loess also recorded the Younger Dryas and the climatic fluctuations during the Holocene. The main magnetic minerals in the loess/paleosol at Znojmo section are magnetite, maghemite, hematite, pyrite, pyrrhotite and goethite. The morphology of these grains reveals that the iron sulfides originated from the eluvium loam above hypothetical ore deposits in the vicinity of the section or glaciofluvial sediments from nearby glacial margins. The pattern of the susceptibility variation at Dolni Vestonice section is coincident with that of the organic matter content. The grain size variation along the section recorded the climate instability since the last interglacial. The climate events in the Dolni Vestonice section may be correlated with the Heinrich events recorded in North Atlantic sediments, suggesting they controlled by the same marine-continent climate system.

植物营养元素的含量和δ~(13)C值随海拔而变化的特征及营养元素相互作用对碳同位素分馏作用的影响

为了研究植物营养元素的含量和δ~(13)C值随海拔而变化的相关关系,沿着海拔450 m的贵州茂兰至海拔1330 m的贵州安顺一线,采集和分析研究了C_3植物——小果蔷薇(R.cymosa Tratt)的叶片。分析结果表明,植物叶片中营养元素含量随着海拔的上升而产生的变化是:氮、磷和钾的含量会在增高,而钙和镁的含量却会降低。植物叶片的δ~(13)C值会增大,其变幅为+2.4‰/1000m。