Untersuchungen zum Verletzungspotential handelsüblicher Soft-Air-Waffen mit einer Geschossenergie zwischen 0,08 Joule und 0,5 Joule

Magdeburg, Univ., Med. Fak., Diss., 2015

1H Magnetresonanzspektroskopie der gesunden Leber und von malignen Leberläsionen bei 3.0 Tesla

Magdeburg, Univ., Med. Fak., Diss., 2015

O emprego das soluções de HCl 0,1 N de EDTA (NH4)2 CO3 e da ditizona - acetato de amônio na extração de zinco em solos de Piracicaba

Foram feitas determinações de zinco total, solúvel em HCl 0,1 N, solúvel em EDTA-(NH4) 2CO3 e solúvel em ditizona em 8 perfis de solos de 8 séries de solos do município de Piracicaba, Estado de São Paulo-Brasil. Para determinação do zinco total, solúvel em HCl 0,1 N, solúvel em EDTA(NH4/2CO3 e solúvel em ditizona, usouse o método de TRIERWEILER e LINDSAY (1968) e para a ditizona (NH4/2SO4 o método de SHAW e DEAN (1952). Foram estudadas as correlações entre as soluções extratoras de zinco e o zinco total, e o confronto entre os extratores químicos. A solução extratora de HCl 0,1 N extraiu maior quantidade de zinco do que as soluções do EDTA-carbonato de amônio e de ditizona acetato de amônio. Esta, por sua vez, na maior parte dos casos, não diferiu da solução do EDTA-carbonato de amônio. Estudo de correlações entre as soluções extratoras e o zinco total mostrou que apenas o HCl 0,1 N apresentou tal correlação. As principais conclusões foram as seguintes: 1- Os teores de zinco total para os perfis de solos situam-se entre 23 e 128 ppm de Zn. 2- As séries Bairrinho, Luiz de Queiroz e Guamium foram as mais altas em Zn total (46 a 128 ppm). 3- As séries Paredão Vermelho, Quebra Dente, Monte Olimpo e Lageadinho foram as mais baixas em zinco total (23 a 55 ppm de Zn). 4- O HCl 0,1 N extraiu mais zinco do que as soluções de EDTA- (NH4) 2CO3 e da ditizona e acetato de amônio. Entre estas duas soluções não houve diferença nos teores. 5- Os solos Luiz de Queiroz, Lageadinho e Bairrinho, foram os altos em zinco solúvel, pelas soluções extratoras.

Distortion of surface groups in Cat (0) free-by-cyclic groups

Given a non-positively curved 2-complex with a circle-valued Morse function satisfying some extra combinatorial conditions, we describe how to locally isometrically embed this in a larger non- positively curved 2-complex with free-by-cyclic fundamental group. This embedding procedure is used to produce examples of CAT(0) free-by-cyclic groups that contain closed hyperbolic surface subgroups with polynomial distortion of arbitrary degree. We also produce examples of CAT(0) hyperbolic free-by-cyclic groups that contain closed hyperbolic surface subgroups that are exponentially distorted.

Cat(0) and Cat (-1) dimensions of torsion free

We show that a particular free-by-cyclic group has CAT(0) dimension equal to 2, but CAT(-1) dimension equal to 3. We also classify the minimal proper 2-dimensional CAT(0) actions of this group; they correspond, up to scaling, to a 1-parameter family of locally CAT(0) piecewise Euclidean metrics on a fixed presentation complex for the group. This information is used to produce an infinite family of 2-dimensional hyperbolic groups, which do not act properly by isometries on any proper CAT(0) metric space of dimension 2. This family includes a free-by-cyclic group with free kernel of rank 6.

BOI 2.0: disseny d'una implementació de JPEG 2000

JPEG 2000 és un estàndard de compressió d'imatges que utilitza tècniques estat de l’art basades en la transformada wavelet. Els principals avantatges són la millor compressió, la possibilitat d’operar amb dades comprimides i que es pot comprimir amb i sense pèrdua amb el mateix mètode. BOI és la implementació de JPEG 2000 del Grup de Compressió Interactiva d’Imatges del departament d’Enginyeria de la Informació i les Comunicacions, pensada per entendre, criticar i millorar les tecnologies de JPEG 2000. La nova versió intenta arribar a tots els extrems de l’estàndard on la versió anterior no va arribar.

Sistema de gestió de tallers: aplicació de tecnologies Web 2.0 a la planificació de la feina d'un taller mecànic

El projecte consisteix en una aplicació que facilita la gestió d'un taller de reparació de vehicles, adquirint especial importància la planificació, control i seguiment dels treballs que porten a terme els operaris. L’aplicatiu es desenvoluparà en entorn web i pretendrà aproximar-se al nivell de prestacions que una aplicació tradicional d'escriptori, gràcies a l'ús de tecnologies Web 2.0 com AJAX, però amb tot el valor afegit que implica una aplicació web.

Sparse regularization for fiber ODF reconstruction: from the suboptimality of ℓ2 and ℓ1 priors to ℓ0.

Diffusion MRI is a well established imaging modality providing a powerful way to probe the structure of the white matter non-invasively. Despite its potential, the intrinsic long scan times of these sequences have hampered their use in clinical practice. For this reason, a large variety of methods have been recently proposed to shorten the acquisition times. Among them, spherical deconvolution approaches have gained a lot of interest for their ability to reliably recover the intra-voxel fiber configuration with a relatively small number of data samples. To overcome the intrinsic instabilities of deconvolution, these methods use regularization schemes generally based on the assumption that the fiber orientation distribution (FOD) to be recovered in each voxel is sparse. The well known Constrained Spherical Deconvolution (CSD) approach resorts to Tikhonov regularization, based on an ℓ(2)-norm prior, which promotes a weak version of sparsity. Also, in the last few years compressed sensing has been advocated to further accelerate the acquisitions and ℓ(1)-norm minimization is generally employed as a means to promote sparsity in the recovered FODs. In this paper, we provide evidence that the use of an ℓ(1)-norm prior to regularize this class of problems is somewhat inconsistent with the fact that the fiber compartments all sum up to unity. To overcome this ℓ(1) inconsistency while simultaneously exploiting sparsity more optimally than through an ℓ(2) prior, we reformulate the reconstruction problem as a constrained formulation between a data term and a sparsity prior consisting in an explicit bound on the ℓ(0)norm of the FOD, i.e. on the number of fibers. The method has been tested both on synthetic and real data. Experimental results show that the proposed ℓ(0) formulation significantly reduces modeling errors compared to the state-of-the-art ℓ(2) and ℓ(1) regularization approaches.

Exploration du Plexus Brachial en Imagerie par Résonance Magnétique 3T.

Objectifs: Optimiser la visualisation du plexus brachial dans le cadre d'un examen par résonance magnétique (IRM), avec prise en compte des paramètres techniques. Matériels et méthodes: L'IRM est devenue la technique de choix pour explorer le plexus brachial en raison de ses capacités techniques (rapport signal/bruit, contraste). Pour cela, nousavons optimisé d'une part des séquences de routine et d'autre part des séquences 3D, dans le but de différencier les structures nerveuses et les tissusenvironnants. Une analyse technique des examens sera réalisée sur la base d'un échantillon de patients de morphotypes variés. Résultats: La morphologie de la région étudiée, différente d'un patient à l'autre, influence la qualité de l'examen. Effectivement, l'épaisseur de tissu (graisseux oumusculaire) présent au niveau du plexus brachial et plus particulièrement celle qui sépare l'air ambiant de l'air présent dans les poumons , demande certainsajustements techniques tels que : shimming, plan d'acquisition et reconstruction issue des séquences 3D. Conclusion: Dans le cadre de cet examen peu fréquent, le manipulateur joue un rôle important tant par les ajustements techniques que par ses connaissances anatomiques,afin de produire une imagerie du plexus brachial de haute précision et de grande qualité.

Kaos en la Red 2.0

La página Web de Kaosenlared es un medio de comunicación libre y alternativo. Se quiere dar un paso adelante y profundizar en lo que se llama Web 2.0. La aplicación Web deberá permitir a usuarios registrarse, iniciar sesión, hacerse un perfil, consultar, editar y eliminar sus noticias y comentarios, hacerse su “Kaos” personalizando la página principal y tener un blog. Es un proyecto que va dirigido principalmente a más de 25.000 usuarios de IP’s diferentes que se conectan a la página Web para informarse de noticias de interés.

Intravoxel incoherent motion perfusion imaging in acute stroke: initial clinical experience.

INTRODUCTION: Intravoxel incoherent motion (IVIM) imaging is an MRI perfusion technique that uses a diffusion-weighted sequence with multiple b values and a bi-compartmental signal model to measure the so-called pseudo-diffusion of blood caused by its passage through the microvascular network. The goal of the current study was to assess the feasibility of IVIM perfusion fraction imaging in patients with acute stroke. METHODS: Images were collected in 17 patients with acute stroke. Exclusion criteria were onset of symptoms to imaging >5 days, hemorrhagic transformation, infratentorial lesions, small lesions <0.5 cm in minimal diameter and hemodynamic instability. IVIM imaging was performed at 3 T, using a standard spin-echo Stejskal-Tanner pulsed gradients diffusion-weighted sequence, using 16 b values from 0 to 900 s/mm(2). Image quality was assessed by two radiologists, and quantitative analysis was performed in regions of interest placed in the stroke area, defined by thresholding the apparent diffusion coefficient maps, as well as in the contralateral region. RESULTS: IVIM perfusion fraction maps showed an area of decreased perfusion fraction f in the region of decreased apparent diffusion coefficient. Quantitative analysis showed a statistically significant decrease in both IVIM perfusion fraction f (0.026 ± 0.019 vs. 0.056 ± 0.025, p = 2.2 · 10(-6)) and diffusion coefficient D compared with the contralateral side (3.9 ± 0.79 · 10(-4) vs. 7.5 ± 0.86 · 10(-4) mm(2)/s, p = 1.3 · 10(-20)). CONCLUSION: IVIM perfusion fraction imaging is feasible in acute stroke. IVIM perfusion fraction is significantly reduced in the visible infarct. Further studies should evaluate the potential for IVIM to predict clinical outcome and treatment response.

High-field (3T) magnetic resonance defecography with functional assessment of the evacuation phase : a pictorial essay : P10

Purpose: Dynamic high-field magnetic resonance (MR) defecography including the evacuation phase is a promising tool for the assessment of functional pelvic disorders, nowadays seen with increasing frequency in elderly women in particular. Learning objectives: 1. To describe the adequate technique of dynamic high-field MRI (3T) in assessing pelvic floor disorders. 2. To provide an overview of the most common pathologies occurring during the evacuation phase, especially in comparison with results of conventional defecography. Methods and materials: After description of the ideal technical parameters of MR defecography performed in supine position after gel rectal filling with a 3 Tesla unit and including the evacuation phase we stress the importance of using a standardized evaluation system for the exact assessment of pelvic floor pathophysiology. Results: The typical pelvic floor disorders occurring before and/or during the evacuation phase, such as sphincter insufficiency, vaginal vault and/or uterine prolapse, cystourethrocele, peritoneo-/ entero-/ sigmoïdocele or rectal prolapse, are demonstrated. The difference between the terms "pelvic floor descent" and "pelvic floor relaxation" are pictorially outlined. MR results are compared with these of conventional defecography. Conclusion: Exact knowledge about the correct technique including the evacuation phase and the use of a standardized evaluation system in assessing pelvic floor disorders by dynamic high-field MRI is mandatory for accurate and reproducible diagnosis.