Studies on Latex Stage Carbon Black Masterbatching of NR and its Blend with SBR

Carbon Black is incorporated In natural rubber latex in , the presence of polyethylene glycol. The dispersion of carbon blade in the vulcanizatea is analyzed using polaroid M.4 land camera The mechanical properties of the carbon black meeterbatched NR/SBR blend Is compared with that of conventional NR/SBR blend before and after ageing , The resilience, flex resistance and hardness are found to be superior for N-LCMISBR compounds. The compression set and abrasion resistance are comparable for both types of blends . The processebiity and die swell of these blends at different shear rates are also compared.

Optimization of Two Stage Process for the Growth of In2S3 , CuInSe2 and CuIn (Sel-xSx)2Thin Films for Solar Cell Application

Two stage processes consisting of precursor preparation by thermal evaporation followed by chalcogenisation in the required atmosphere is found to be a feasible technique for the PV materials such as n-Beta In2S3, p-CulnSe2, p-CulnS2 and p-CuIn(Sel_xSx)2. The growth parameters such as chalcogenisation temperature and duration of chalcogenisation etc have been optimised in the present study.Single phase Beta-In2S3 thin films can be obtained by sulfurising the indium films above 300°C for 45 minutes. Low sulfurisation temperatures required prolonged annealing after the sulfurisation to obtain single phase Beta-1n2S3, which resulted in high material loss. The maximum band gap of 2.58 eV was obtained for the nearly stoichiometric Beta-In2S3 film which was sulfurised at 350°C. This wider band gap, n type Beta-In2S3 can be used as an alternative to toxic CdS as window layer in photovoltaics .The systematic study on the structural optical and electrical properties of CuInSe2 films by varying the process parameters such as the duration of selenization and the selenization temperature led to the conclusion that for the growth of single-phase CuInSe2, the optimum selenization temperature is 350°C and duration is 3 hours. The presence of some binary phases in films for shorter selenization period and lower selenization temperature may be due to the incomplete reaction and indium loss. Optical band gap energy of 1.05 eV obtained for the films under the optimum condition.In order to obtain a closer match to the solar spectrum it is desirable to increase the band gap of the CulnSe2 by a few meV . Further research works were carried out to produce graded band gap CuIn(Se,S)2 absorber films by incorporation of sulfur into CuInSe2. It was observed that when the CulnSe2 prepared by two stage process were post annealed in sulfur atmosphere, the sulfur may be occupying the interstitial positions or forming a CuInS2 phase along with CuInSe2 phase. The sulfur treatment during the selenization process OfCu11 ln9 precursors resulted in Culn (Se,S)2 thin films. A band gap of 1.38 eV was obtained for the CuIn(Se,S)2.The optimised thin films n-beta 1n2S3, p-CulnSe2 and p-Culn(Sel-xSx)2 can be used for fabrication of polycrystalline solar cells.

Preparation and characterization of micro and nano fiber reinforced natural rubber composites by latex stage processing

Use of short fibers as reinforcing fillers in rubber composites is on an increasing trend. They are popular due to the possibility of obtaining anisotropic properties, ease of processing and economy. In the preparation of these composites short fibers are incorporated on two roll mixing mills or in internal mixers. This is a high energy intensive time consuming process. This calls for developing less energy intensive and less time consuming processes for incorporation and distribution of short fibers in the rubber matrix. One method for this is to incorporate fibers in the latex stage. The present study is primarily to optimize the preparation of short fiber- natural rubber composite by latex stage compounding and to evaluate the resulting composites in terms of mechanical, dynamic mechanical and thermal properties. A synthetic fiber (Nylon) and a natural fiber (Coir) are used to evaluate the advantages of the processing through latex stage. To extract the full reinforcing potential of the coir fibers the macro fibers are converted to micro fibers through chemical and mechanical means. The thesis is presented in 7 chapters

The protective and attractive covering of a vegetated embankment using coir geotextiles

This paper presents the results of a field experiment conducted in Kerala, South India, to test the effectiveness of coir geotextiles for embankment protection. The results reveal that treatment with geotextile in combination with grass is an effective eco-hydrological measure to protect steep slopes from erosion. In the context of sustainable watershed management, coir is a cheap and locally available material that can be used to strengthen traditional earthen bunds or protect the banks of village ponds from erosion. Particularly in developing countries, where coir is abundantly available and textiles can be produced by small-scale industry, this is an attractive alternative for conventional methods. This paper analyses the performance of coir geotextile in different treatments with respect to soil moisture content, protection against erosion and biomass production

A Study of Single Stage Semi‐Dry Anaerobic Digestion of Organic Fraction of Municipal Solid Waste

Solid waste generation is a natural consequence of human activity and is increasing along with population growth, urbanization and industrialization. Improper disposal of the huge amount of solid waste seriously affects the environment and contributes to climate change by the release of greenhouse gases. Practicing anaerobic digestion (AD) for the organic fraction of municipal solid waste (OFMSW) can reduce emissions to environment and thereby alleviate the environmental problems together with production of biogas, an energy source, and digestate, a soil amendment. The amenability of substrate for biogasification varies from substrate to substrate and different environmental and operating conditions such as pH, temperature, type and quality of substrate, mixing, retention time etc. Therefore, the purpose of this research work is to develop feasible semi-dry anaerobic digestion process for the treatment of OFMSW from Kerala, India for potential energy recovery and sustainable waste management. This study was carried out in three phases in order to reach the research purpose. In the first phase, batch study of anaerobic digestion of OFMSW was carried out for 100 days at 32°C (mesophilic digestion) for varying substrate concentrations. The aim of this study was to obtain the optimal conditions for biogas production using response surface methodology (RSM). The parameters studied were initial pH, substrate concentration and total organic carbon (TOC). The experimental results showed that the linear model terms of initial pH and substrate concentration and the quadratic model terms of the substrate concentration and TOC had significant individual effect (p < 0.05) on biogas yield. However, there was no interactive effect between these variables (p > 0.05). The optimum conditions for maximizing the biogas yield were a substrate concentration of 99 g/l, an initial pH of 6.5 and TOC of 20.32 g/l. AD of OFMSW with optimized substrate concentration of 99 g/l [Total Solid (TS)-10.5%] is a semi-dry digestion system .Under the optimized condition, the maximum biogas yield was 53.4 L/kg VS (volatile solid).. In the second phase, semi-dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for substrate concentration of 100 g/l (TS-11.2%) for investigating the start-up performances under thermophilic condition (50°C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS for the substrate concentration of 100 g/l. About 66.7% of volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day-1. A laboratory bench scale reactor with a capacity of 36.8 litres was designed and fabricated to carry out the continuous anaerobic digestion of OFMSW in the third phase. The purpose of this study was to evaluate the performance of the digester at total solid concentration of 12% (semi-dry) under mesophlic condition (32°C). The digester was operated with different organic loading rates (OLRs) and constant retention time. The performance of the reactor was evaluated using parameters such as pH, volatile fatty acid (VFA), alkalinity, chemical oxygen demand (COD), TOC and ammonia-N as well as biogas yield. During the reactor’s start-up period, the process is stable and there is no inhibition occurred and the average biogas production was 14.7 L/day. The reactor was fed in continuous mode with different OLRs (3.1,4.2 and 5.65 kg VS/m3/d) at constant retention time of 30 days. The highest volatile solid degradation of 65.9%, with specific biogas production of 368 L/kg VS fed was achieved with OLR of 3.1 kg VS/m3/d. Modelling and simulation of anaerobic digestion of OFMSW in continuous operation is done using adapted Anaerobic Digestion Model No 1 (ADM1).The proposed model, which has 34 dynamic state variables, considers both biochemical and physicochemical processes and contains several inhibition factors including three gas components. The number of processes considered is 28. The model is implemented in Matlab® version 7.11.0.584(R2010b). The model based on adapted ADM1 was tested to simulate the behaviour of a bioreactor for the mesophilic anaerobic digestion of OFMSW at OLR of 3.1 kg VS/m3/d. ADM1 showed acceptable simulating results.

Higher Education Governance in Vietnam: University Action, the State and Changing Relationships

Diese Dissertation stellt eine Studie da, welche sich mit den Änderungen in der Governance der Hochschulbildung in Vietnam beschäftigt. Das zentrale Ziel dieser Forschungsarbeit ist die Untersuchung der Herkunft und Änderung in der Beziehung der Mächte zwischen dem vietnamesischen Staat und den Hochschulbildungsinstituten (HI), welche hauptsächlich aus der Interaktion dieser beiden Akteure resultiert. Die Macht dieser beiden Akteure wurde im sozialen Bereich konstruiert und ist hauptsächlich durch ihre Nützlichkeit und Beiträge für die Hochschulbildung bestimmt. Diese Arbeit beschäftigt sich dabei besonders mit dem Aspekt der Lehrqualität. Diese Studie nimmt dabei die Perspektive einer allgemeinen Governance ein, um die Beziehung zwischen Staat und HI zu erforschen. Zudem verwendet sie die „Resource Dependence Theory“ (RDT), um das Verhalten der HI in Bezug auf die sich verändernde Umgebung zu untersuchen, welche durch die Politik und eine abnehmende Finanzierung charakterisiert ist. Durch eine empirische Untersuchung der Regierungspolitik sowie der internen Steuerung und den Praktiken der vier führenden Universitäten kommt die Studie zu dem Schluss, dass unter Berücksichtigung des Drucks der Schaffung von Einkommen die vietnamesischen Universitäten sowohl Strategien als auch Taktiken entwickelt haben, um Ressourcenflüsse und Legitimität zu kontrollieren. Die Entscheidungs- und Zielfindung der Komitees, die aus einer Mehrheit von Akademikern bestehen, sind dabei mächtiger als die der Manager. Daher werden bei initiativen Handlungen der Universitäten größtenteils Akademiker mit einbezogen. Gestützt auf die sich entwickelnden Muster der Ressourcenbeiträge von Akademikern und Studierenden für die Hochschulbildung prognostiziert die Studie eine aufstrebende Governance Konfiguration, bei der die Dimensionen der akademischen Selbstverwaltung und des Wettbewerbsmarktes stärker werden und die Regulation des Staates rational zunimmt. Das derzeitige institutionelle Design und administrative System des Landes, die spezifische Gewichtung und die Koordinationsmechanismen, auch als sogenanntes effektives Aufsichtssystem zwischen den drei Schlüsselakteuren - der Staat, die HI/Akademiker und die Studierenden – bezeichnet, brauchen eine lange Zeit zur Detektion und Etablierung. In der aktuellen Phase der Suche nach einem solchen System sollte die Regierung Management-Tools stärken, wie zum Beispiel die Akkreditierung, belohnende und marktbasierte Instrumente und das Treffen informations-basierter Entscheidungen. Darüber hinaus ist es notwendig die Transparenz der Politik zu erhöhen und mehr Informationen offenzulegen.

Technical and scale efficiency of cassava production system in Delta State, Nigeria: an application of Two-Stage DEA approach

The present study examines the level of pure technical and scale efficiencies of cassava production system including its sub-processes (that is production and processing stages) of 278 cassava farmers/processors from three regions of Delta State, Nigeria by applying Two-Stage Data Envelopment Analysis (DEA) approach. Results reveal that pure technical efficiency (PTE) is significantly lower at the production stage 0.41 vs 0.55 for the processing stage, but scale efficiency (SE) is high at both stages (0.84 and 0.87), implying that productivity can be improved substantially by reallocation of resources and adjusting operation size. The socio-economic determinants exert differential impacts on PTE and SE at each stage. Overall, education, experience and main occupation as farmer significantly improve SE while subsistence pressure reduces it. Extension contact significantly improves SE at the processing stage but reduces PTE and SE overall. Inverse size-PTE and size-SE relationships exist in cassava production system. In other words, large/medium farms are technically and scale inefficient. Gender gap exists in performance. Male farmers are technically efficient at processing stage but scale inefficient overall. Farmers in northern region are technically efficient. Investments in education, extension services and infrastructure are suggested as policy options to improve the cassava sector in Nigeria.

Moderating effects of management control systems and innovation on performance. Simple methods for correcting the effects of measurement error for interaction effects in small samples

In the accounting literature, interaction or moderating effects are usually assessed by means of OLS regression and summated rating scales are constructed to reduce measurement error bias. Structural equation models and two-stage least squares regression could be used to completely eliminate this bias, but large samples are needed. Partial Least Squares are appropriate for small samples but do not correct measurement error bias. In this article, disattenuated regression is discussed as a small sample alternative and is illustrated on data of Bisbe and Otley (in press) that examine the interaction effect of innovation and style of use of budgets on performance. Sizeable differences emerge between OLS and disattenuated regression

Assessing the Precision of Compositional Data in a Stratified Double Stage Cluster Sample: Application to the Swiss Earnings Structure Survey

Precision of released figures is not only an important quality feature of official statistics, it is also essential for a good understanding of the data. In this paper we show a case study of how precision could be conveyed if the multivariate nature of data has to be taken into account. In the official release of the Swiss earnings structure survey, the total salary is broken down into several wage components. We follow Aitchison's approach for the analysis of compositional data, which is based on logratios of components. We first present diferent multivariate analyses of the compositional data whereby the wage components are broken down by economic activity classes. Then we propose a number of ways to assess precision

La adquisición de la interrogación: las interrogativas parciales en catalán y castellano = The acquisition of interrogatives:Wh-questions in Catalan and Spanish

En este trabajo se describe la naturaleza y secuencia de adquisición de las preguntas interrogativas parciales en niños de habla catalana y/o castellana dentro de un marco de análisis según el cual la adquisición de las estructuras lingüísticas se construye gradualmente desde estructuras concretas hasta estructuras más abstractas. La muestra utilizada se compone de 10 niños y niñas procedentes de corpus longitudinales cuyas edades van de los 17 meses a los 3 años. El análisis se ha realizado atendiendo a la estructura sintáctica de la oración, los errores, los pronombres y adverbios interrogativos, y la tipología verbal. Los resultados muestran que la secuencia de adquisición pasa por un momento inicial caracterizado por producciones estereotipadas o fórmulas, durante el cual sólo aparecen algunas partículas interrogativas en estructuras muy concretas. Posteriormente la interrogación aparece con otros pronombres y adverbios y se diversifica a otros verbos, además, no se observan errores en la construcción sintáctica. Estos resultados suponen un hecho diferencial respecto de estudios previos en lengua inglesa

INFO2009 Stage Test Orientation

notes and slides to guide preparation for stage test

Pérdida de heterocigocidad e identificación de portadoras de distrofia muscular de Duchenne: un caso familiar con evento de recombinación*

La distrofia muscular de Duchenne y Becker (DMD/DMB) es una entidad de herencia recesiva ligada al cromosoma X que se presenta con debilidad muscular y es causada por mutaciones en el gen de la distrofina. La pérdida de heterocigocidad permite identificar a las mujeres portadoras de deleción en el gen de la distrofina mediante haplotipos. Objetivo: identificar mujeres portadoras en una familia con un paciente afectado de DMD mediante análisis de pérdida de heterocigocidad. Materiales y métodos: se analizaron nueve miembros de una familia con un afectado de DMD. Se hizo extracción de ADN y amplificación de diez STR del gen de la distrofina; se construyeron haplotipos, y se determinó el estado de portadora de deleción en dos de las seis mujeres analizadas, quienes mostraron pérdida de heterocigocidad de tres STR. Se establecieron algunos eventos de recombinación. Resultados: Dos de las seis mujeres analizadas, mostraron perdida de heterocigocidad en tres de los diez STR genotipificados, indicando su estado de portadora de deleción en este fragmento del gen de la Distrofina Con la segregación familiar de los haplotipos se establecieron eventos de recombinación. Conclusiones: mediante pérdida de heterocigocidad es posible establecer el estado de portadora de deleción en el gen de la distrofina con un 100% de certeza. La construcción de haplotipos identifica el cromosoma X portador de la deleción en familiares del caso índice. Se evidenció un evento de recombinación en una de las hermanas del afectado, lo que hace indeterminado su estado de portadora.