Towards equivalent health care of prisoners: European soft law and public health policy in Geneva.

Prisoners have a right to health care and to be protected against inhumane and degrading treatment. Health care personnel and public policy makers play a central role in the protection of these rights and in the pursuit of public health goals. This article examines the legal framework for prison medicine in the canton of Geneva, Switzerland and provides examples of this framework that has shaped prisoners' medical care, including preventive measures. Geneva constitutes an intriguing example of how the Council of Europe standards concerning prison medicine have acquired a legal role in a Swiss canton. Learning how these factors have influenced implementation of prison medicine standards in Geneva may be helpful to public health managers elsewhere and encourage the use of similar strategies.

Single-metal deposition: optimization of this fingermark enhancement technique

Following the introduction of single-metal deposition (SMD), a simplified fingermark detection technique based on multimetal deposition, optimization studies were conducted. The different parameters of the original formula were tested and the results were evaluated based on the contrast and overall aspect of the enhanced fingermarks. The new formula for SMD was found based on the most optimized parameters. Interestingly, it was found that important variations from the base parameters did not significantly affect the outcome of the enhancement, thus demonstrating that SMD is a very robust technique. Finally, a comparison of the optimized SMD with multi-metal deposition (MMD) was carried out on different surfaces. It was demonstrated that SMD produces comparable results to MMD, thus validating the technique.

Multi-phase postmortem CT angiography: recognizing technique-related artefacts and pitfalls.

BACKGROUND AND PURPOSE: Multi-phase postmortem CT angiography (MPMCTA) is increasingly being recognized as a valuable adjunct medicolegal tool to explore the vascular system. Adequate interpretation, however, requires knowledge about the most common technique-related artefacts. The purpose of this study was to identify and index the possible artefacts related to MPMCTA. MATERIAL AND METHODS: An experienced radiologist blinded to all clinical and forensic data retrospectively reviewed 49 MPMCTAs. Each angiographic phase, i.e. arterial, venous and dynamic, was analysed separately to identify phase-specific artefacts based on location and aspect. RESULTS: Incomplete contrast filling of the cerebral venous system was the most commonly encountered artefact, followed by contrast agent layering in the lumen of the thoracic aorta. Enhancement or so-called oedematization of the digestive system mucosa was also frequently observed. CONCLUSION: All MPMCTA artefacts observed and described here are reproducible and easily identifiable. Knowledge about these artefacts is important to avoid misinterpreting them as pathological findings.

Temporal Geobiotic Mapping: a conceptual mapping technique toward visualising geobiotic areas in cross-section

Geobiota are defined by taxic assemblages (i.e., biota) and their defining abiotic breaks, which are mapped in cross-section to reveal past and future biotic boundaries. We term this conceptual approach Temporal Geobiotic Mapping (TGM) and offer it as a conceptual approach for biogeography. TGM is based on geological cross-sectioning, which creates maps based on the distribution of biota and known abiotic factors that drive their distribution, such as climate, topography, soil chemistry and underlying geology. However, the availability of abiotic data is limited for many areas. Unlike other approaches, TGM can be used when there is minimal data available. In order to demonstrate TGM, we use the well-known area in the Blue Mountains, New South Wales (NSW), south-eastern Australia and show how surface processes such as weathering and erosion affect the future distribution of a Moist Basalt Forest taxic assemblage. Biotic areas are best represented visually as maps, which can show transgressions and regressions of biota and abiota over time. Using such maps, a biogeographer can directly compare animal and plant distributions with features in the abiotic environment and may identify significant geographical barriers or pathways that explain biotic distributions.

Superficial soft tissue sarcomas (S-STS): a study of 367 patients from the French Sarcoma Group (FSG) database.

AIM: The specific natural history of superficial soft tissue sarcomas (S-STS) has been rarely considered. We describe the clinical characteristics of a large series of S-STS (N=367) from the French Sarcoma Group (GSF-GETO) database and analyse the prognostic factors affecting outcome. METHODS: We performed univariate and multivariate analyses for overall survival (OS), metastasis-free survival (MFS) and local recurrence-free survival (LRFS). RESULTS: The median age was 59 years. Fifty-eight percent patients were female. Tumour locations were as follows: extremities, 55%; trunk wall, 35.4%; head and neck, 8% and unknown, 1.6%. Median tumour size was 3.0 cm. The most frequent tumour types were unclassified sarcoma (24.3%) and leiomyosarcoma (22.3%). Thirty-three percent of cases were grade 3. Median follow-up was 6.18 years. The 5-year OS, MFS and LRFS rates were 80.9%, 80.7% and 74.7%, respectively. Multivariate analysis retained histological type and wide resection for predicting LRFS and histological type and grade as prognostic factors of MFS. The factors influencing OS were age, histological type, grade and wide resection. STS with early invasion into but not through the underlying fascia had a significantly poorer MFS than with strict S-STS. CONCLUSION: S-STS represent a separate category characterised by a better outcome. Adequate surgery, i.e. wide resection, is essential in the management of S-STS.

Laparoscopic inguinal hernia repair with extraperitoneal double-mesh technique.

Totally extraperitoneal laparoscopic hernia repair is an efficient but technically demanding procedure. As mechanisms of hernia recurrence may be related to these technical difficulties, we have modified a previously described double-mesh technique in an effort to simplify the procedure. Extraperitoneal laparoscopic hernia repairs were performed in 82 male and 17 female patients having inguinal, femoral, and recurrent bilateral hernias. A standard propylene mesh measuring 15 x 15 cm was cut into two pieces of 4 x 15 cm and 11 x 15 cm. The smaller mesh was placed over both inguinal rings without splitting. The larger mesh was then inserted over the first mesh and stapled to low-risk zones, reinforcing the large-vessel area and the nerve transition zone. The mean procedure duration was 60 minutes for unilateral and 100 minutes for bilateral hernia repair. Patients were discharged from the hospital within 48 hours. The mean postoperative follow-up was 22 months, with no recurrences, neuralgia, or bleeding complications. Over a 2-year period, this technique was found to be satisfactory without recurrences or significant complications. In our hands, this technique was easier to perform: it allows for a less than perfect positioning of the meshes and avoids most of the stapling to crucial zones.

Efficiency of the induced mating technique for Toxorhynchites theobaldi (Diptera, Culicidae)

Toxorhynchites mosquitoes play important ecological roles in aquatic microenvironments, and are frequently investigated as potential biological control agents of mosquito disease vectors. Establishment of Toxorhynchites laboratory colonies can be challenging because for some species, mating and insemination either do not occur or require a prohibitive amount of laboratory space for success. Consequently, artificial insemination techniques have been developed to assist with mass rearing of these species. Herein we describe an adapted protocol for colony establishment of T. theobaldi, a species with broad distribution in the Neotropics. The success of the technique and its implications are discussed.

Lean IT Application of 5S/6S Technique in a SME

O Lean não é apenas uma prática. É uma revolução nas Tecnologias de Informação (TI) proporcionando uma maior e melhor utilização dos recursos e procurando alcançar custos mais baixos dos que existem atualmente. É muito mais do que uma lista de ferramentas e metodologias e para que seja estabelecido é necessário mudar comportamentos culturais e incentivar todas as organizações a pensarem de forma diferente sobre o poder da informação versus o valor do negócio. Normalmente associa-se o Lean à criação de valor para a organização. Mas o valor é significativo quando é trazido com eficiência e resultando na eliminação de processos que consomem tempo, recursos e espaço desnecessário. Os princípios Lean podem ajudar as organizações na melhoria da qualidade, redução de custos e no alcance da eficiência através de uma melhor produtividade. Existem vários conceitos Lean que podem ser associados a diferentes objetivos de resolução de problemas. Em particular, este trabalho é uma dissertação programada para analisar um novo paradigma sobre o Lean que surgiu recentemente - Lean para Tecnologias de Informação (Lean IT). Esta dissertação apresenta uma abordagem para o Lean IT (enquadramento, objetivos e metodologia) para realizar o trabalho e utiliza um único estudo de caso, com abordagem à técnica 5S/6S (até o terceiro nível de avaliação), numa Pequena, Média Empresa (PME), de forma a demonstrar a agregação de valor e as vantagens na eliminação de resíduos/desperdícios nos seus processos. A técnica também mostra a evolução da avaliação antes e depois da sua aplicação. Este estudo de caso individual avalia um Departamento de TI (com uma equipe de cinco colaboradores e um chefe de Departamento) através da observação direta, documentação e arquivos de registos e os equipamentos analisados são computadores, postos de trabalho e projetos (código desenvolvido, portais e outros serviços de TI). x Como guia, a metodologia inclui a preparação da avaliação em conjunto com o responsável/chefe do Departamento de TI, o desenrolar das operações, a identificação do fluxo de valor para cada atividade, o desenvolvimento de um plano de comunicação e a análise de cada passo da avaliação do fluxo de processamento. Os principais resultados estão refletidos nas novas ferramentas de trabalho (Microsoft SharePoint e Microsoft Project em detrimento do Microsoft Excel) que fornecem comunicação remota e controlo de projetos para todos os stakeholders, tais como, a gestão de topo, parceiros e clientes (algumas organizações incluem o Outsourcing no desenvolvimento de funcionalidades específicas). Os resultados também refletem-se na qualidade do trabalho, no cumprimento de prazos, na segurança física e lógica, na motivação dos colaboradores e na satisfação dos clientes. A técnica 5S/6S ajuda a esclarecer os conceitos e princípios Lean, exequibilidade e aumenta a curiosidade sobre a implementação da técnica noutros departamentos tais como o Financeiro e ou o de Recursos Humanos. Como forma de consolidação do trabalho tornou-se possível organizar a avaliação para que a organização possa candidatar-se a uma certificação na norma ISO/IEC 25010:2011, no modelo de qualidade de software (software é o core business desta PME). Mas tal só será possível se toda a organização atingir a padronização dos seus processos. Este estudo de caso mostra que os conceitos Lean e a aplicação de uma ou mais das suas técnicas (neste caso particular a técnica 5S/6S) ajuda a obter melhores resultados através da gestão e melhoria dos seus principais serviços.

Isolated limb perfusion with tumor necrosis factor and melphalan for non-resectable soft tissue sarcomas : long-term results on efficacy and limb salvage in a selected group of patients

Rapport de synthèse : Introduction : La perfusion isolée de membre (isolated limb perfusion, ou ILP) par TNF-alpha et melphalan, utilisés en association, est une stratégie de prise en charge chirurgicale des sarcomes non opérables des extrémités. Elle a été en partie développée au CHUV dans les années 1990, sous l'impulsion du Professeur F. Lejeune, ancien Chef du Service d'oncologie médicale (CePO). Les résultats des 31 premiers patients ont été publiés en 2000 dans l'European Journal of Surgical Oncology. Les données dans la littérature manquant sur les résultats à long terme, nous avons revu tous les patients traités au CHUV depuis 1992 pour tenter des de déterminer ces résultats à long terme, en se focalisant sur l'efficacité du traitement, symbolisée par le taux de sauvetage de membres, autrement condamnés à l'amputation ou à une chirurgie mutilante. Matériel et méthode : Etude rétrospective. De 1992 à mars 2006, 51 patients ont été traités par ILP dans notre institution, certains à deux reprises (58 ILP au total). Quatre-vingt-huit pour cent présentaient un sarcome de haut grade de malignité, et 84% une tumeur localement avancée (T2b NO Mo ou plus). Résultats : Le follow-up moyen est de 38.9 mois (4-159, médiane 22 mois), on note 21 % de complications immédiates et 23% de complications tardives ou chroniques. Une réponse complète (nécrose totale ou disparition de la tumeur) a été observée dans 25% des cas, une réponse partielle (>50% de nécrose ou de diminution de taille tumorale) dans 42%, une stabilité de la maladie dans 14% et une progression tumorale dans 14%. Un traitement adjuvant a été entrepris dans 31 % des cas, une résection des résidus tumoraux a pu être effectuée chez 65% des patients. On note un taux de récidive locale de 35% (après 20,3 mois en moyenne) et un taux de récidive à distance de 45% (après 13,4 mois en moyenne). Le disease-free survival est de 14,9 mois et la survie à 5 ans de 43,5%. Le taux d'amputation s'élève à 24%. Conclusion : La perfusion isolée de membre est un traitement grevé d'un taux élevé de complications, mais il peut étre entrepris dans les sarcomes les plus sévères avec un succès significatif. Ainsi, dans notre série, une chirurgie mutilante (en général l'amputation) a pu être épargnée à 76% des patients.