Biological cycle of Tenuipalpus heveae Baker (Acari, Tenuipalpidae) on leaflets of three rubber tree clones

Life cycle of Tenuipalpus heveae Baker (Acari, Tenuipalpidae) on leaflets from three rubber tree clones. The biological cycle of Tenuipalpus heveae Baker, 1945 (Tenuipalpidae), a potential rubber tree pest mite, was studied by the observation of individuals reared on leaflets of the clones GT 1, PB 235 and RRIM 600, in controlled environmental conditions. Three daily observations were done of 60 eggs on leaflets from each clone in order to verify the development of immature stages and the female oviposition. The fertility life table was constructed based in the collected data. Mites reared on PB 235 had faster rate of development, requiring less time in days, to double its population in number (TD), and had the highest values for egg production, female longevity, net reproductive rate (Ro), intrinsic rate of natural increase (r m) and finite rate of increase (λ). Lower reproductive values and the longest time necessary to reach adult stage were recorded for the mites on GT 1. In all studied clones, the deutonymphal phase had the highest viability, while the larval phase had the lowest, highlighted by the survivorship curve that indicated high mortality during this life stage. The clone PB 235 allowed the most suitable conditions for the development of T. heveae, followed by RRIM 600, while GT 1 was the less suitable substratum to rear this mite species.

Effects of (p)ppGpp on the progression of the cell cycle of Caulobacter crescentus.

Bacteria must control the progression of their cell cycle in response to nutrient availability. This regulation can be mediated by guanosine tetra- or pentaphosphate [(p)ppGpp], which are synthesized by enzymes of the RelA/SpoT homologue (Rsh) family, particularly under starvation conditions. Here, we study the effects of (p)ppGpp on the cell cycle of Caulobacter crescentus, an oligotrophic bacterium with a dimorphic life cycle. C. crescentus divides asymmetrically, producing a motile swarmer cell that cannot replicate its chromosome and a sessile stalked cell that is replication competent. The swarmer cell rapidly differentiates into a stalked cell in appropriate conditions. An artificial increase in the levels of (p)ppGpp in nonstarved C. crescentus cells was achieved by expressing a truncated relA gene from Escherichia coli, encoding a constitutively active (p)ppGpp synthetase. By combining single-cell microscopy, flow cytometry approaches, and swarming assays, we show that an increase in the intracellular concentration of (p)ppGpp is sufficient to slow down the swarmer-to-stalked cell differentiation process and to delay the initiation of chromosome replication. We also present evidence that the intracellular levels of two master regulators of the cell cycle of C. crescentus, DnaA and CtrA, are modulated in response to (p)ppGpp accumulation, even in the absence of actual starvation. CtrA proteolysis and DnaA synthesis seem indirectly inhibited by (p)ppGpp accumulation. By extending the life span of the motile nonreproductive swarmer cell and thus promoting dispersal and foraging functions over multiplication under starvation conditions, (p)ppGpp may play a central role in the ecological adaptation of C. crescentus to nutritional stresses.

Tough adults, frail babies: an analysis of stress sensitivity across early life-history stages of widely introduced marine invertebrates

All ontogenetic stages of a life cycle are exposed to environmental conditions so that population persistence depends on the performance of both adults and offspring. Most studies analysing the influence of abiotic conditions on species performance have focussed on adults, while studies covering early life-history stages remain rare. We investigated the responses of early stages of two widely introduced ascidians, Styela plicata and Microcosmus squamiger, to different abiotic conditions. Stressors mimicked conditions in the habitats where both species can be found in their distributional ranges and responses were related to the selection potential of their populations by analysing their genetic diversity. Four developmental stages (egg fertilisation, larval development, settlement, metamorphosis) were studied after exposure to high temperature (30°C), low salinities (26 and 22 ) and high copper concentrations (25, 50 and 100 µg/L). Although most stressors effectively led to failure of complete development (fertilisation through metamorphosis), fertilisation and larval development were the most sensitive stages. All the studied stressors affected the development of both species, though responses differed with stage and stressor. S. plicata was overall more resistant to copper, and some stages of M. squamiger to low salinities. No relationship was found between parental genetic composition and responses to stressors. We conclude that successful development can be prevented at several life-history stages, and therefore, it is essential to consider multiple stages when assessing species' abilities to tolerate stress. Moreover, we found that early development of these species cannot be completed under conditions prevailing where adults live. These populations must therefore recruit from elsewhere or reproduce during temporal windows of more benign conditions. Alternatively, novel strategies or behaviours that increase overall reproductive success might be responsible for ensuring population survival.

Rapid antagonistic coevolution between strains of the social amoeba Dictyostelium discoideum.

Social groups face a fundamental problem of overcoming selfish individuals capable of destroying cooperation. In the social amoeba Dictyostelium discoideum, there is evidence that some clones ('cheaters') contribute disproportionately to the viable spores in a fruiting body while avoiding the dead stalk cell fate. It remains unclear, however, whether this cheating is actually the product of selection. Here, I report the results of an experimental evolution study designed to test whether clones of D. discoideum will evolve resistance to cheating in the laboratory with genetic variation created only through spontaneous mutation. Two strains, one green fluorescent protein (GFP)-labelled and one wild-type, were allowed to grow and develop together before the wild-type strain was removed and replaced with a naïve strain evolving in parallel. Over the course of 10 social generations, the GFP-labelled strain reliably increased its representation in the spores relative to control populations that had never experienced the competitor. This competitive advantage extended to the non-social, vegetative growth portion of the life cycle, but not to pairwise competition with two other strains. These results indicate strong antagonism between strains, mediated by ample mutational variation for cheating and also suggest that arms races between strains in the wild may be common.

Molecular genetic approaches to the biology of the moss "Physcomitrella patens"

La mousse haplobiontique Physcomitrella patens est utilisée comme système génétique modèle pour l'étude du développement des plantes. Cependant, l'absence d'un protocole efficace de transformation a constitué jusqu'à présent un gros désavantage méthodologique pour le développement futur de ce système expérimental. Les résultats présentés dans le premier chapitre relatent la mise au point d'un protocole de transformation basé sur la technique de transfert direct de gènes dans des protoplastes par précipitation au PEG. Un essai d'expression transitoire de gènes a été mis au point. Ce protocole a été adapté afin de permettre l'introduction in vivo d'anticorps dans des protoplastes. Le protocole modifié permet d'introduire simultanément du DNA et des IgG dans les cellules, et nous avons démontré que ces anticorps peuvent inactiver spécifiquement le produit d'un gène co-introduit (GUS), ainsi que certaines protéines impliquées dans des processus cellulaires (tubuline). Cet essai, baptisé "essai transitoire d'immuno-inactivation in vivo", devrait être directement applicable à d'autres protoplastes végétaux, et permettre l'élaboration de nouvelles stratégies dans l'étude de processus cellulaires. Le second chapitre est consacré aux expériences de transformation de la mousse avec des gènes conférant une résistance à des antibiotiques. Nos résultats démontrent que l'intégration de gènes de résistance dans le génome de P. patens est possible, mais que cet événement est rare. Il s'agit là néanmoins de la première démonstration d'une transformation génétique réussie de cet organisme. L'introduction de gènes de résistance aux antibiotiques dans les protoplastes de P. patens génère à haute fréquence des clones résistants instables. Deux classes de clones instables ont été identifiés. La caractérisation phénotypique, génétique et moléculaire de ces clones suggère fortement que les séquences transformantes sont concaténées pour former des structures de haut poids moléculaire, et que ces structures sont efficacement répliquées et maintenues dans les cellules résistantes en tant qu'éléments génétiques extrachromosomaux. Ce type de transformation nous permet d'envisager des expériences permettant l'identification des séquences génomiques impliquées dans la replication de l'ADN de mousse. Plusieurs lignées transgéniques ont été retransformées avec des plasmides portant des séquences homologues aux séquences intégrées dans le génome, mais conférant une résistance à un autre antibiotique. Les résultats présentés dans le troisième chapitre montrent que les fréquences de transformation intégrative dans les lignées transgéniques sont 10 fois plus élevées que dans la lignée sauvage, et que cette augmentation est associée à une coségrégation des gènes de résistance dans la plupart des clones testés. Ces résultats génétiques indiquent que l'intégration de séquences d'ADN étranger dans le génome de P. patens a lieu en moyenne 10 fois plus fréquemment par recombinaison homologue que par intégration aléatoire. Ce rapport homologue/aléatoire est 10000 fois supérieur aux rapports obtenus avec d'autres plantes, et fournit l'outil indispensable à la réalisation d'expériences de génétique inverse dans cet organisme à haplophase dominante. THESIS SUMMARY The moss Physcomitrella patens is used as a model genetic system to study plant development, taking advantage of the fact that the haploid gametophyte dominates in its life cycle. But further development of this model system was hampered by the lack of a protocol allowing the genetic transformation of this plant. We have developed a transformation protocol based on PEG-mediated direct gene transfer to protoplasts. Our data demonstrate that this procedure leads to the establishment of an efficient transient gene expression assay. A slightly modified protocol has been developed allowing the in vivo introduction of antibodies in moss protoplasts. Both DNA and IgGs can be loaded simultaneously, and specific antibodies can immunodeplete the product of an expression cassette (GUS) as well as proteins involved in cellular processes (tubulins). This assay, named transient in vivo immunodepletion assay, should be applicable to other plant protoplasts, and offers new approaches to study cellular processes. Transformations have been performed with bacterial plasmids carrying antibiotic resistance expression cassette. Our data demonstrate that integrative transformation occurs, but at low frequencies. This is the first demonstration of a successful genetic transformation of mosses. Resistant unstable colonies are recovered at high frequencies following transformation, and two different classes of unstable clones have been identified. Phenotypical, genetic and molecular characterisation of these clones strongly suggests that bacterial plasmids are concatenated to form high molecular arrays which are efficiently replicated and maintained as extrachromosomal elements in the resistant cells. Replicative transformation in P. patens should allow the design of experiments aimed at the identification of genomic sequences involved in moss DNA replication. Transgenic strains have been retransformed with bacterial plasmids carrying sequences homologous to the integrated transloci, but conferring resistance to another antibiotic. Our results demonstrate an order of magnitude increase of integrative transformation frequencies in transgenic strains as compared to wild-type, associated with cosegregation of the resistance genes in most of these double resistant transgenic strains. These observations provide strong genetic evidence that gene targeting occurs about ten times more often than random integration in the genome of P. patens. Such ratio of targeted to random integration is about 10 000 times higher than previous reports of gene targeting in plants, and provides the essential requirement for the development of efficient reverse genetics in the haplodiplobiontic P. patens.

Durable, Cost-Effective Pavement Markings Phase I: Synthesis of Current Research, June 2001

Pavement marking technology is a continually evolving subject. There are numerous types of materials used in the field today, including (but not limited to) paint, epoxy, tape, and thermoplastic. Each material has its own set of unique characteristics related to durability, retro reflectivity, installation cost, and life-cycle cost. The Iowa Highway Research Board was interested in investigating the possibility of developing an ongoing program to evaluate the various products used in pavement marking. This potential program would maintain a database of performance and cost information to assist state and local agencies in determining which materials and placement methods are most appropriate for their use. The Center for Transportation Research and Education at Iowa State University has completed Phase I of this research: to identify the current practice and experiences from around the United States to recommend a further course of action for the State of Iowa. There has been a significant amount of research completed in the last several years. Research from Michigan, Pennsylvania, South Dakota, Ohio, and Alaska all had some common findings: white markings are more retro reflective than yellow markings; paint is by-and-large the least expensive material; paint tends to degrade faster than other materials; thermoplastic and tapes had higher retro reflective characteristics. Perhaps the most significant program going on in the area of pavement markings is the National Transportation Product Evaluation Program (NTPEP). This is an ongoing research program jointly conducted by the American Association of State Highway and Transportation Officials and its member states. Field and lab tests on numerous types of pavement marking materials are being conducted at sites representing four climatological areas. These results are published periodically for use by any jurisdiction interested in pavement marking materials performance.At this time, it is recommended that the State of Iowa not embark on a test deck evaluation program. Instead, close attention should be paid to the ongoing evaluations of the NTPEP program. Materials that fare well on the NTPEP test de cks should be considered for further field studies in Iowa.

Durable, Cost-Effective Pavement Markings Phase I: Synthesis of Current Reseaech, June 2001

Pavement marking technology is a continually evolving subject. There are numerous types of materials used in the field today, including (but not limited to) paint, epoxy, tape, and thermoplastic. Each material has its own set of unique characteristics related to durability, retroreflectivity, installation cost, and life-cycle cost. The Iowa Highway Research Board was interested in investigating the possibility of developing an ongoing program to evaluate the various products used in pavement marking. This potential program would maintain a database of performance and cost information to assist state and local agencies in determining which materials and placement methods are most appropriate for their use. The Center for Transportation Research and Education at Iowa State University has completed Phase I of this research: to identify the current practice and experiences from around the United States to recommend a further course of action for the State of Iowa. There has been a significant amount of research completed in the last several years. Research from Michigan, Pennsylvania, South Dakota, Ohio, and Alaska all had some common findings: white markings are more retroreflective than yellow markings; paint is by-and-large the least expensive material; paint tends to degrade faster than other materials; thermoplastic and tapes had higher retroreflective characteristics. Perhaps the most significant program going on in the area of pavement markings is the National Transportation Product Evaluation Program (NTPEP). This is an ongoing research program jointly conducted by the American Association of State Highway and Transportation Officials and its member states. Field and lab tests on numerous types of pavement marking materials are being conducted at sites representing four climatological areas. These results are published periodically for use by any jurisdiction interested in pavement marking materials performance. At this time, it is recommended that the State of Iowa not embark on a test deck evaluation program. Instead, close attention should be paid to the ongoing evaluations of the NTPEP program. Materials that fare well on the NTPEP test de cks should be considered for further field studies in Iowa.

Life-history evolution and the polyphenic regulation of somatic maintenance and survival.

Here we discuss life-history evolution from the perspective of adaptive phenotypic plasticity, with a focus on polyphenisms for somatic maintenance and survival. Polyphenisms are adaptive discrete alternative phenotypes that develop in response to changes in the environment. We suggest that dauer larval diapause and its associated adult phenotypes in the nematode (Caenorhabditis elegans), reproductive dormancy in the fruit fly (Drosophila melanogaster) and other insects, and the worker castes of the honey bee (Apis mellifera) are examples of what may be viewed as the polyphenic regulation of somatic maintenance and survival. In these and other cases, the same genotype can--depending upon its environment--express either of two alternative sets of life-history phenotypes that differ markedly with respect to somatic maintenance, survival ability, and thus life span. This plastic modulation of somatic maintenance and survival has traditionally been underappreciated by researchers working on aging and life history. We review the current evidence for such adaptive life-history switches and their molecular regulation and suggest that they are caused by temporally and/or spatially varying, stressful environments that impose diversifying selection, thereby favoring the evolution of plasticity of somatic maintenance and survival under strong regulatory control. By considering somatic maintenance and survivorship from the perspective of adaptive life-history switches, we may gain novel insights into the mechanisms and evolution of aging.

Looking for factors involved in the light-dependent degradation of phytochrome A

SUMMARY : Phytochromes constitute a family of red/far-red photoreceptors regulating all the major transitions during the life cycle of plants. In Arabidopsis, five members: phyA,_ B, C, D and E, were identified. Phytochromes are synthesized in their inactive red-light absorbing form called Pr. Upon light absorbance they convert to the far-red light absorbing Pfr form. The Pfr form is the active conformer which converts back to the Pr form either rapidly upon far-red perception or in a slower process called dark reversion. ph~A represents an exception, in that it does not significantly dark-revert and two specific processes have been developed by the plants to decrease the amount of biologically active phyA. The first one is alight-dependent repression of the PHYA gene expression and the second one is alight-dependent degradation of the phyA protein. The latter is the most efficient process to rapidly decrease the level of active phyA. The ability of plants to regulate the amount of active phyA is critical in a far-red rich environment, a situation observed under a canopy. In these conditions, phyA is essential to induce the germination and the deetiolation of the young seedling. Later in the development the ability of phyA to repress growth counteracts the shade avoidance response. Therefore decreasing the amount of phyA allows stem growth and to compete with neighbours for the light. In this thesis, I investigate the light-dependent degradation of phyA. I developed a reverse genetic approach based on the systematic analysis of the light-dependent accumulation of phyA in the different cullin mutant cull, cul3a; cul3b and cul4. This analysis allowed me to show that CUL1 and CUL3A-based E3 ligase complexes are involved in the regulation of phyA degradation. Surprisingly, our results also demonstrate that cu14 is not affected in the degradation of phyA whereas constitutive Photomorphogenic 1 (COP1) a subunit of one CUL4based E3 complex was reported to be involved. Further investigations showed that the phenotype of cop1 is conditional, the mutant being defective in phyA degradation only in the presence of metabolisable sugars. I also showed that phyA is degraded by a proteasome-dependent mechanism both in the cytoplasm and in the nucleus using mutants and transgenic lines affected in the localization of phyA. Interestingly, I observed that phyA degradation was faster in the nucleus than in the cytosol and that rapid degradation of Pr also occurred in the nucleus suggesting that cytosolic accumulation of phyA in the dark is a way to regulate its proteolysis. Finally, we identify a short region similar to a PEST sequence required for phyA stability and we developed a unbiased genetic screen to identify new components involved in the regulation of the light-dependent degradation of phyA. The significance of these results are discussed. RESUME : Les phytochromes (phy) constituent une famille de photorécepteurs absorbant la lumière rouge et rouge lointaine et régulant toutes les étapes de transitions majeures dans la vie des plantes. Chez Arabidopsis, cinq membres : phyA, B, C, D et E ont été identifiés. Les phytochromes sont synthétisés sous une forme inactive appelée Pr absorbant la lumière rouge. Après perception de lumière ils passent sous une forme active Pfr absorbant dans le rouge lointain. La forme Pfr peut retourner sous la forme Pr après absorption de lumiëre rouge lointaine ou dans un processus lent appelé «réversion à l'obscurité ». phyA représente une exception à cette règle car il ne retoune pas significativement sous sa forme inactive dans le noir. Deux processus spécifiques ont donc été développés pour diminuer le taux de phyA actif. Le premier consiste en la répression du gène PHYA en condition de lumière et le second en une dégradation induite par la lumière de la protéine phyA. Ce dernier processus est le plus efficace pour diminuer rapidement le niveau de phyA. La capacité des plantes à réguler le taux de phyA actifs est critique dans un environnement riche en lumière rouge lointaine, une situation observée sous une canopée. Sous une canopée, phyA est essentiel pour induire la germination et la dé-étiolation de la jeune pousse. Plus tard dans le développement la capacité de phyA de réprimer la croissance freine la «réponse à l'évitement de l'ombre ». Par conséquent diminuer le taux de phyA permet la croissance de la tige et donc de rentrer en compétition pour la lumière avec les plantes avoisinantes. Dans cette thèse, j'ai étudié la dégradation de phyA. J'ai développé une approche génétique inverse basée sur l'analyse systématique de l'accumulation de phyA en condition de lumière dans les différents mutants cullin, cul1, cul3a, cul3b et cul4. Ces analyses nous ont permis d'identifier qu'un complexe E3 ligase CUL1 et un complexe E3 ligase CUL3A sont impliqués dans la régulation de la dégradation de phyA. Mes résultats démontrent aussi que le mutant cul4 n'est pas affecté dans la dégradation de phyA alors que Çonstitutive Photomorphogenic 1 (COPI) une sous unité d'un complexe CUL4 à été identifier dans la régulation de cette dégradation. Des analyses supplémentaires suggèrent que l'effet de la mutation cop1 est dépendante dë la présence de sucres métabolisables. J'ai aussi montré que phyA est dégradé dans le noyau et dans le cytoplasme par un mécanisme dépendant du protéasome et que la dégradation dans le.noyau est non seulement aspécifique de la forme Pr ou Pfr mais aussi est plus rapide que dans le cytoplasme. Ceci suggère que l'accumulation de phyA dans le cytoplasme permet son accumulation à des niveaux élevés à l'obscurité. Enfin j'ai identifié une région similaire à un motif PEST requise pour la stabilité de phyA et j'ai aussi développé un criblage génétique non biaisé pour identifier de nouveaux composants impliqués dans la régulation de la dégradation de phyA. L'importance de ces résultats est discutée dans le dernier chapitre de cette thèse.

A regional Industrial Symbiosis methodology and its implementation in Geneva, Switzerland

The Agenda 21 for the Geneva region is the results from a broad consultation process including all local actors. The article 12 stipulates that « the State facilitates possible synergies between economic activities in order to minimize their environmental impacts » thus opening the way for Industrial Ecology (IE) and Industrial Symbiosis (IS). An Advisory Board for Industrial Ecology and Industrial Symbiosis implementation was established in 2002 involving relevant government agencies. Regulatory and technical conditions for IS are studied in the Swiss context. Results reveal that the Swiss law on waste does not hinder by-product exchanges. Methodology and technical factors including geographic, qualitative, quantitative and economical aspects are detailed. The competition with waste operators in a highly developed recycling system is also tackled.The IS project develops an empirical and systematic method for detecting and implementing by-products synergies between industrial actors disseminated throughout the Geneva region. Database management tool for the treatment of input-output analysis data and GIS tools for detecting potentials industrial partners are constantly improved. Potential symbioses for 17 flows (including energy, water and material flows) are currently studied for implementation.

The Role of Magnesium in Concrete Deterioration, HR-355, 1994

Concretes with service lives of less than 15 years and those with lives greater than 40 years were studied with petrographic microscope, scanning electron microscope, and electron microprobe to determine why these two groups of concrete exhibit such different degrees of durability under highway conditions. Coarse aggregate used in both types of concrete were from dolomite rock, but investigation revealed that dolomite aggregate in the two groups of concretes were much different in several respects. The poorly-performing aggregate is fine-grained, has numerous euhedral and subhedral dolomite rhombohedra, and has relatively high porosity. Aggregate from durable concrete is coarse-grained, with tightly interlocked crystal fabric, anhedral dolomite boundaries, and low porosity. Aggregate in short service life concrete was found to have undergone pervasive chemical reactions with the cement which produced reaction rims on the boundaries of coarse aggregate particles and in the cement region adjacent to aggregate boundaries. Textural and porosity differences are believed to be chiefly responsible for different service lives of the two groups of concrete. The basic reaction that has occurred in the short service life concretes between coarse aggregate and cement is an alkali-dolomite reaction. In the reaction dolomite from the aggregate reacts with hydroxide ions from the cement to free magnesium ions and carbonate ions, and the magnesium ions precipitate as brucite, Mg(OH)2. Simultaneously with this reaction, a second reaction occurs in which product carbonate ions react with portlandite from the cement to form calcite and hydroxide ions. Crystal growth pressures of newly formed brucite and calcite together with other processes, e.g. hydration state changes of magnesium chloride hydrates, lead to expansion of the concretes with resultant rapid deterioration. According to this model, magnesium from any source, either from reacting dolomite or from magnesium road deicers, has a major role in highway concrete deterioration. Consequently, magnesium deicers should be used with caution, and long-term testing of the effects of magnesium deicers on highway concrete should be implemented to determine their effects on durability.

Field Monitoring of Curved Girder Bridges with Integral Abutments, TPF-5(169), 2014

Nationally, there are questions regarding the design, fabrication, and erection of horizontally curved steel girder bridges due to unpredicted girder displacements, fit-up, and locked-in stresses. One reason for the concerns is that up to one-quarter of steel girder bridges are being designed with horizontal curvature. There is also an urgent need to reduce bridge maintenance costs by eliminating or reducing deck joints, which can be achieved by expanding the use of integral abutments to include curved girder bridges. However, the behavior of horizontally curved bridges with integral abutments during thermal loading is not well known nor understood. The purpose of this study was to investigate the behavior of horizontal curved bridges with integral abutment (IAB) and semi-integral abutment bridges (SIAB) with a specific interest in the response to changing temperatures. The long-term objective of this effort is to establish guidelines for the use of integral abutments with curved girder bridges. The primary objective of this work was to monitor and evaluate the behavior of six in-service, horizontally curved, steel-girder bridges with integral and semi-integral abutments. In addition, the influence of bridge curvature, skew and pier bearing (expansion and fixed) were also part of the study. Two monitoring systems were designed and applied to a set of four horizontally curved bridges and two straight bridges at the northeast corner of Des Moines, Iowa—one system for measuring strains and movement under long term thermal changes and one system for measuring the behavior under short term, controlled live loading. A finite element model was developed and validated against the measured strains. The model was then used to investigate the sensitivity of design calculations to curvature, skew and pier joint conditions. The general conclusions were as follows: (1) There were no measurable differences in the behavior of the horizontally curved bridges and straight bridges studied in this work under thermal effects. For preliminary member sizing of curved bridges, thermal stresses and movements in a straight bridge of the same length are a reasonable first approximation. (2) Thermal strains in integral abutment and semi-integral abutment bridges were not noticeably different. The choice between IAB and SIAB should be based on life – cycle costs (e.g., construction and maintenance). (3) An expansion bearing pier reduces the thermal stresses in the girders of the straight bridge but does not appear to reduce the stresses in the girders of the curved bridge. (4) An analysis of the bridges predicted a substantial total stress (sum of the vertical bending stress, the lateral bending stress, and the axial stress) up to 3 ksi due to temperature effects. (5) For the one curved integral abutment bridge studied at length, the stresses in the girders significantly vary with changes in skew and curvature. With a 10⁰ skew and 0.06 radians arc span length to radius ratio, the curved and skew integral abutment bridges can be designed as a straight bridge if an error in estimation of the stresses of 10% is acceptable.

Propuesta de implementación del cultivo del manzano (Malus domestica) en la Vall d'Alinyà : análisis de viabilidad ambiental-económica y certificación de créditos voluntarios de carbono

El presente proyecto tiene por objetivo realizar una propuesta de cultivo de manzano (Malus domestica) en la Vall d’Alinyà para el desarrollo de un producto agroalimentario que contribuya a la revitalización de esta área rural y a la mitigación del calentamiento global. Para ello, se pretende proporcionar una metodología para calcular, con mayor precisión, el comportamiento de los cultivos como sumidero de carbono a partir del balance neto de gases con efecto invernadero (GEI) del sistema. Con tal de obtener las emisiones de GEI generadas por los cultivos se desarrolla un análisis del ciclo de vida (ACV), y para obtener la fijación de los cultivos, se realiza un análisis de su capacidad de absorción de dióxido de carbono en la biomasa de la plantación. Además, mediante el uso de sistemas de información geográfica (SIG), se determinaron los terrenos potenciales para el cultivo del manzano en la zona de estudio. Posteriormente, se verifica la certificación de créditos en el mercado de carbono voluntario y se analiza la viabilidad económica del proyecto, obteniendo así un producto (la manzana) con valor ambiental añadido. Como conclusión se obtuvo una viabilidad positiva de la verificación de créditos, puesto que el balance neto de carbono fue positivo, absorbiéndose 234,54 t CO2 en todo el territorio potencialmente cultivable (16,92 ha) y durante 15 años de actividad agrícola. Al mismo tiempo, la propuesta resultó viable económicamente, generándose unos beneficios ligados a la venta de producción frutícola y de los créditos de carbono de 79.484 € durante los 15 años de actividad productiva.

LM-vesiturbiinin tuotteistaminen

Tämän työn tarkoituksena on kehittää LM-vesiturbiini tuotantoon soveltuvaksi, käytöltään pitkäikäiseksi ja helposti huollettavaksi tuotesarjaksi. Työn ohjaavana runkona on käytetty VDI-Richtlinie 2221: 'Kehitystyön ja konstruoinnin yleinen kulku', mukaista järjestelmää. Lisäksi on käytetty valmistuksellista modulointia tuotteen osien suunnittelussa. Erityisesti on huomioitu tuotteen koko elinkaaren aikaiset kustannukset (LCC) ja sen vaatimukset mitoitukseen. LM-vesiturbiinistaon kehitetty kolmen erikokoisen laitteiston tuotesarja. Tuoteperheen yksittäisistä sylinteriryhmistä voidaan koota joustavasti erikokoisia ja -tehoisia energiantuotantoyksiköitä, jotka soveltuvat käyttöön hyvin pieniinkin virtauksiin ja putouskorkeuksiin. Piensarjatuotantoon hyvin soveltuvat materiaalit on valittu silmälläpitäen mahdollisimman edullista kokonaiskustannusta. Kiertomäntä laitteiston toiminnan kannalta tärkeimpänä ja siten vaativimpana osana on edellyttänyt laserhitsausta ja -leikkausta sekä koekappaleiden valmistusta, joiden perusteellalopulliseen rakenteeseen on päädytty. Mitoitus perustuu perinteisiin lujuuslaskentamenetelmiin, joiden avulla eri osien kestävyys käyttöolosuhteissa on pyrittysaamaan luotettavaksi vähintään 20 vuoden kestoiälle ja väsymiskestävyyteen käytön aikaisissa vaihtelevissa olosuhteissa. Kiertomäntä on ns. kevytrakenne koostuen ohutlevykennorakenteesta ja täytteenä olevasta kompound-materiaalista.

Using tools to help cost estimating and pricing: examination of costing model's and cost breakdown's workability and their capability to cooperative work

Tämä diplomityö käsittelee työkaluja, jotka on suunniteltu kustannusten ennakointiin ja hinnan asetantaan. Aluksi on käyty läpi perinteisen ja toimintoperusteisen kustannuslaskennan perusteita. Näiden menetelmien välisiä eroja on tarkasteltu ja toimintoperusteisen kustannuslaskennan paremmin sopivuus nykypäivän yrityksille on perusteltu. Toisena käsitellään hinnoittelu. Hinnan merkitys, hinnoittelumenetelmät ja päätös lopullisesta hinnasta on käyty läpi. Hinnoittelun jälkeen esitellään kustannusjärjestelmät ja kustannusten arviointi. Nämä asiat todistavat, että tarkat kustannusarviot ovat elintärkeitä yritykselle. Tuotteen kustannusarviointi, hinnan asetanta ja tarjoaminen ovat erittäin merkityksellisiä asioita ottaen huomioon koko projektin elinkaaren ja tulevat tuotot. Nykyään on yleistä käyttää työkaluja kustannusarvioinnissa ja joskus myös hinnoittelussa. Työkalujen luotettavuus on tiedettävä, ennenkuin työkalut otetaan käyttöön. Myös työkalujen käyttäjät täytyy perehdyttää hyvin. Muuten yritys todennäköisesti kohtaa odottamattomia ja epämiellyttäviä yllätyksiä.