986 resultados para shelf-life


Relevância:

60.00% 60.00%

Publicador:

Resumo:

This paper explores demand and production management challenges in the food processing industry. The goal is to identify the main production planning constraints and secondly to explore how each of these constraints affects company’s performance in terms of costs and customer service level. A single case study methodology was preferred since it enabled the collection of in-depth data. Findings suggest that product shelf life, carcass utilization and production lead time are the main constraints affecting supply chain efficiency and hence, a single planning approach is not appropriate when different products have different technological and processing characteristics.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Lyophilisation or freeze drying is the preferred dehydrating method for pharmaceuticals liable to thermal degradation. Most biologics are unstable in aqueous solution and may use freeze drying to prolong their shelf life. Lyophilisation is however expensive and has seen lots of work aimed at reducing cost. This thesis is motivated by the potential cost savings foreseen with the adoption of a cost efficient bulk drying approach for large and small molecules. Initial studies identified ideal formulations that adapted well to bulk drying and further powder handling requirements downstream in production. Low cost techniques were used to disrupt large dried cakes into powder while the effects of carrier agent concentration were investigated for powder flowability using standard pharmacopoeia methods. This revealed superiority of crystalline mannitol over amorphous sucrose matrices and established that the cohesive and very poor flow nature of freeze dried powders were potential barriers to success. Studies from powder characterisation showed increased powder densification was mainly responsible for significant improvements in flow behaviour and an initial bulking agent concentration of 10-15 %w/v was recommended. Further optimisation studies evaluated the effects of freezing rates and thermal treatment on powder flow behaviour. Slow cooling (0.2 °C/min) with a -25°C annealing hold (2hrs) provided adequate mechanical strength and densification at 0.5-1 M mannitol concentrations. Stable bulk powders require powder transfer into either final vials or intermediate storage closures. The targeted dosing of powder formulations using volumetric and gravimetric powder dispensing systems where evaluated using Immunoglobulin G (IgG), Lactate Dehydrogenase (LDH) and Beta Galactosidase models. Final protein content uniformity in dosed vials was assessed using activity and protein recovery assays to draw conclusions from deviations and pharmacopeia acceptance values. A correlation between very poor flowability (p<0.05), solute concentration, dosing time and accuracy was revealed. LDH and IgG lyophilised in 0.5 M and 1 M mannitol passed Pharmacopeia acceptance values criteria with 0.1-4 while formulations with micro collapse showed the best dose accuracy (0.32-0.4% deviation). Bulk mannitol content above 0.5 M provided no additional benefits to dosing accuracy or content uniformity of dosed units. This study identified considerations which included the type of protein, annealing, cake disruption process, physical form of the phases present, humidity control and recommended gravimetric transfer as optimal for dispensing powder. Dosing lyophilised powders from bulk was demonstrated as practical, time efficient, economical and met regulatory requirements in cases. Finally the use of a new non-destructive technique, X-ray microcomputer tomography (MCT), was explored for cake and particle characterisation. Studies demonstrated good correlation with traditional gas porosimetry (R2 = 0.93) and morphology studies using microscopy. Flow characterisation from sample sizes of less than 1 mL was demonstrated using three dimensional X-ray quantitative image analyses. A platinum-mannitol dispersion model used revealed a relationship between freezing rate, ice nucleation sites and variations in homogeneity within the top to bottom segments of a formulation.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

2002 Mathematics Subject Classification: 62P30, 62P10.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Prodotti di IV gamma a base di frutta e verdura minimamente trattati o pronti all'uso non possono essere considerati sicuri da un punto di vista microbiologico e sono stati spesso associati a casi di tossinfezione. Per tali episodi è stato evidenziato che la qualità dell'acqua utilizzata per il lavaggio è una fase critica. D'altra parte è noto che la disinfezione è una delle fasi di lavorazione più importanti per i prodotti minimamente trattati in quanto ha effetti diretti sulla qualità dei prodotti finiti, sulla sicurezza e la loro shelf-life. Tradizionalmente, l'industria di IV gamma ha impiegato i composti derivati del cloro per la fase di disinfezione in virtù della loro efficacia, semplicità d'uso e basso costo. Tuttavia vi è una diffusa tendenza ad eliminare i prodotti a base di cloro a causa soprattutto della preoccupazione in relazione ai rischi ambientali e sanitari per il consumatore associati alla formazione di sottoprodotti alogenati cancerogeni. Tra le varie tecnologie emergenti, proposte come alternative al cloro, il plasma ha presentato buone potenzialità in virtù delle specie chimiche che lo compongono, principalmente specie reattive dell’ossigeno e dell’azoto, che sembrano essere responsabili di stress ossidativo alle cellule microbiche, con conseguenti danni per DNA, proteine e lipidi. L’obiettivo generale di questo elaborato finale è stato quello di valutare la possibilità di utilizzare la tecnologia del plasma per la decontaminazione superficiale di carote julienne. In particolare si sono presi in considerazione trattamenti diretti in cui il vegetale è stato esposto al plasma per differenti tempi compresi tra 5 e 40 minuti. Inoltre, si è utilizzo il plasma per il trattamento di acqua che è stata successivamente impiegata per il lavaggio delle carote julienne. L'efficacia di entrambe le modalità di trattamento è stata verificata nei confronti sia della microflora naturalmente contaminante le carote, sia di alcuni microrganismi patogeni che possono essere associati a tale vegetale: Listeria monocytogenes, Salmonella Enteritidis ed Escherichia coli.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Lactic acid bacteria expolysaccharides (LAB-EPS), in particular those formed from sucrose have the potential to improve food and beverage rheology and enhance their sensory properties potentially replacing or reducing expensive hydrocolloids currently used as improvers in food and beverage industries. Addition of sucrose not only enables EPS formation but also affects organic acid formation, thus influencing the sensory properties of the resulting food/beverage products. The first part of the study the organoleptic modulation of barley malt derived wort fermented using in situ produced bacterial polysaccharides has been investigated. Weisella cibaria MG1 was capable to produce exopolysaccharides during sucrosesupplemented barley malt derived wort fermentation. Even though the strain dominated the (sucrose-supplemented) wort fermentation, it was found to produce EPS (14.4 g l-1) with lower efficiency than in SucMRS (34.6 g l-1). Higher maltose concentration in wort led to the increased formation of oligosaccharide (OS) at the expense of EPS. Additionally, small amounts of organic acids were formed and ethanol remained below 0.5% (v/v). W. cibaria MG1 fermented worts supplemented with 5 or 10% sucrose displayed a shear-thinning behaviour indicating the formation of polymers. This report showed how novel and nutritious LAB fermented wort-base beverage with prospects for further advancements can be formulated using tailored microbial cultures. In the next step, the impact of exopolysaccharide-producing Weissella cibaria MG1 on the ability to improve rheological properties of fermented plant-based milk substitute plant based soy and quinoa grain was evaluated. W. cibaria MG1 grew well in soy milk, exceeding a cell count of log 8 cfu/g within 6 h of fermentation. The presence of W. cibaria MG1 led to a decrease in gelation and fermentation time. EPS isolated from soy yoghurts supplemented with sucrose were higher in molecular weight (1.1 x 108 g/mol vs 6.6 x 107 g/mol), and resulted in reduced gel stiffness (190 ± 2.89 Pa vs 244 ± 15.9 Pa). Soy yoghurts showed typical biopolymer gels structure and the network structure changed to larger pores and less cross-linking in the presence of sucrose and increasing molecular weight of the EPS. In situ investigation of Weissella cibaria MG1 producing EPS on quinoa-based milk was performed. The production of quinoa milk, starting from wholemeal quinoa flour, was optimised to maximise EPS production. On doing that, enzymatic destructuration of protein and carbohydrate components of quinoa milk was successfully achieved applying alpha-amylase and proteases treatments. Fermented wholemeal quinoa milk using Weissella cibaria MG1 showed high viable cell counts (>109 cfu/mL), a pH of 5.16, and significantly higher water holding capacity (WHC, 100 %), viscosity (> 0. 5 Pa s) and exopolysaccharide (EPS) amount (40 mg/L) than the chemically acidified control. High EPS (dextran) concentration in quinoa milk caused earlier aggregation because more EPS occupy more space, and the chenopodin were forced to interact with each other. Direct observation of microstructure in fermented quinoa milk indicated that the network structures of EPS-protein could improve the texture of fermented quinoa milk. Overall, Weissella cibaria MG1 showed favorable technology properties and great potential for further possible application in the development of high viscosity fermented quinoa milk. The last part of the study investigate the ex-situ LAB-EPS (dextran) application compared to other hydrocolloids as a novel food ingredient to compensate for low protein in biscuit and wholemeal wheat flour. Three hydrocolloids, xanthan gum, dextran and hydroxypropyl methylcellulose, were incorporated into bread recipes based on high-protein flours, low-protein flours and coarse wholemeal flour. Hydrocolloid levels of 0–5 % (flour basis) were used in bread recipes to test the water absorption. The quality parameters of dough (farinograph, extensograph, rheofermentometre) and bread (specific volume, crumb structure and staling profile) were determined. Results showed that xanthan had negative impact on the dough and bread quality characteristics. HPMC and dextran generally improved dough and bread quality and showed dosage dependence. Volume of low-protein flour breads were significantly improved by incorporation of 0.5 % of the latter two hydrocolloids. However, dextran outperformed HPMC regarding initial bread hardness and staling shelf life regardless the flour applied in the formulation.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The dietary intake of sodium chloride has increased considerably over the last few decades due to changes in the human diet. This higher intake has been linked to a number of diseases including hypertension and other cardiovascular diseases. Numerous international health agencies, as well as the food industry, have now recommended a salt intake level of 5-6 g daily, approximately half of the average current daily intake level. Cereal products, and in particular bread, are a major source of salt in the Western diet. Therefore, any reduction in the level of salt in bread could have a major impact on global health. However, salt is a critical ingredient in bread production, and its reduction can have a deleterious effect on the production process as well as on the final bread quality characteristics such as shelf-life, bread volume and sensory characteristics, all deviating from the bakers’ and consumers’ expectations. This work addresses the feasibility of NaCl reduction in wheat bread focusing on options to compensate NaCl with the use of functional sourdoughs. Three strains were used for the application of low-salt bread; L. amylovorus DSM19280, W. cibaria MG1 and L. reuteri FF2hh2. The multifunctional strain L. reuteri FF2hh2 was tested the first time and its application could be demonstrated successfully. The functionalities were based on the production of exopolysaccharides as well as the production of antifungal compounds. While the exopolysaccharides, mainly high molecular dextrans, positively influenced mainly bread loaf volume, crumb structure and staling rate, the strains producing antifungal compounds prolonged the microbial shelf life significantly and compensated the lack of salt. The impact on the sensory characteristics of bread were evaluated by descriptive sensory evaluation. The increase in surface area as well as the presence of organic acids impacted significantly on the flavour profile of the sourdough bread samples. The flavour attribute “salt” could be enhanced by sourdough addition and increased the salty perception. Furthermore, a trained sensory panel evaluated for the first time the impact of yeast activity, based on different salt and yeast concentrations, on the volatile aroma profile of bread crumb samples. The analytical measurements using high resolution gas chromatography and proton-transfer-reaction mass spectrometry (PTR-MS) resulted in significantly different results based on different yeast activities. Nevertheless, the extent of the result could not be recognised by the sensory panel analysing the odour profile of the bread crumb samples. Hence, the consumer cannot recognised low-salt bread by its odour. The use of sourdough is a natural option to overcome the broad range of technological issues caused by salt reduction and also a more popular alternative compared to existing chemical salt replacers.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The establishment and control of oxygen levels in packs of oxygen-sensitive food products such as cheese is imperative in order to maintain product quality over a determined shelf life. Oxygen sensors quantify oxygen concentrations within packaging using a reversible optical measurement process, and this non-destructive nature ensures the entire supply chain can be monitored and can assist in pinpointing negative issues pertaining to product packaging. This study was carried out in a commercial cheese packaging plant and involved the insertion of 768 sensors into 384 flow-wrapped cheese packs (two sensors per pack) that were flushed with 100% carbon dioxide prior to sealing. The cheese blocks were randomly assigned to two different storage groups to assess the effects of package quality, packaging process efficiency, and handling and distribution on package containment. Results demonstrated that oxygen levels increased in both experimental groups examined over the 30-day assessment period. The group subjected to a simulated industrial distribution route and handling procedures of commercial retailed cheese exhibited the highest level of oxygen detected on every day examined and experienced the highest rate of package failure. The study concluded that fluctuating storage conditions, product movement associated with distribution activities, and the possible presence of cheese-derived contaminants such as calcium lactate crystals were chief contributors to package failure.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Large (10 × 10 cm) sheets of surface-enhanced Raman spectroscopy (SERS) active polymer have been prepared by stabilising metal nanoparticle aggregates within dry hydroxyethylcellulose (HEC) films. In these films the aggregates are protected by the polymer matrix during storage but in use they are released when aqueous analyte droplets cause the films to swell to their gel form. The fact that these "Poly-SERS" films can be prepared in bulk but then cut to size and stored in air before use means that they provide a cost effective and convenient method for routine SERS analysis. Here we have tested both Ag and Au Poly-SERS films for use in point-of-care monitoring of therapeutic drugs, using phenytoin as the test compound. Phenytoin in water could readily be detected using Ag Poly-SERS films but dissolving the compound in phosphate buffered saline (PBS) to mimic body fluid samples caused loss of the drug signal due to competition for metal surface sites from Cl- ions in the buffer solution. However, with Au Poly-SERS films there was no detectable interference from Cl- and these materials allowed phenytoin to be detected at 1.8 mg L-1, even in PBS. The target range of detection of phenytoin in therapeutic drug monitoring is 10-20 mg L-1. With the Au Poly-SERS films, the absolute signal generated by a given concentration of phenytoin was lower for the films than for the parent colloid but the SERS signals were still high enough to be used for therapeutic monitoring, so the cost in sensitivity for moving from simple aqueous colloids to films is not so large that it outweighs the advantages which the films bring for practical applications, in particular their ease of use and long shelf life.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Purpose of this paper:
Recent literature indicates that around one third of perishable products finish as waste (Mena et al., 2014): 60% of this waste can be classified as avoidable (EC, 2010) suggesting logistics and operational inefficiencies along the supply chain. In developed countries perishable products are predominantly wasted in wholesale and retail (Gustavsson et al., 2011) due to customer demand uncertainty the errors and delays in the supply chain (Fernie and Sparks, 2014). While research on logistics of large retail supply chains is well documented, research on retail small and medium enterprises’ (SMEs) capabilities to prevent and manage waste of perishable products is in its infancy (c.f. Ellegaard, 2008) and needs further exploration. In our study, we investigate the retail logistics practice of small food retailers, the factors that contribute to perishable products waste and the barriers and opportunities of SMEs in retail logistics to preserve product quality and participate in reverse logistics flows.

Design/methodology/approach:
As research on waste of perishable products for SMEs is scattered, we focus on identifying key variables that contribute to the creation of avoidable waste. Secondly we identify patterns of waste creation at the retail level and its possibilities for value added recovery. We use explorative case studies (Eisenhardt, 1989) and compare four SMEs and one large retailer that operate in a developed market. To get insights into specificities of SMEs that affect retail logistics practice, we select two types of food retailers: specialised (e.g. greengrocers and bakers) and general (e.g. convenience store that sells perishable products as a part of the assortment)

Findings:
Our preliminary findings indicate that there is a difference between large retailers and SME retailers in factors that contribute to the waste creation, as well as opportunities for value added recovery of products. While more factors appear to affect waste creation and management at large retailers, a small number of specific factors appears to affect SMEs. Similarly, large retailers utilise a range of practices to reduce risks of product perishability and short shelf life, manage demand, and manage reverse logistics practices. Retail SMEs on the other hand have limited options to address waste creation and value added recovery. However, our findings show that specialist SMEs could successfully minimize waste and even create possibilities for value added recovery of perishable products. Data indicates that business orientation of the SME, the buyersupplier relationship, and an extent of adoption of lean principles in retail coupled with SME resources, product specific regulations and support from local authorities for waste management or partnerships with other organizations determine extent of successful preservation of a product quality and value added recovery.

Value:
Our contribution to the SCM academic literature is threefold: first, we identify major factors that contribute to the generation waste of perishable products in retail environment; second, we identify possibilities for value added recovery for perishable products and third, we present opportunities and challenges for SME retailers to manage or participate in activities of value added recovery. Our findings contribute to theory by filling a gap in the literature that considers product quality preservation and value added recovery in the context of retail logistics and SMEs.

Research limitations/implications:
Our findings are limited to insights from five case studies of retail companies that operate within a developed market. To improve on generalisability, we intend to increase the number of cases and include data obtained from the suppliers and organizations involved in reverse logistics flows (e.g. local authorities, charities, etc.).

Practical implications:
With this paper, we contribute to the improvement of retail logistics and operations in SMEs which constitute over 99% of business activities in UK (Rhodes, 2015). Our findings will help retail managers and owners to better understand the possibilities for value added recovery, investigate a range of logistics and retail strategies suitable for the specificities of SME environment and, ultimately, improve their profitability and sustainability.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Le alte pressioni di omogeneizzazione sono considerate una tecnologia non termica basata sull’applicazione di pressioni comprese tra 60 e 400 MPa ad alimenti fluidi o fluidificabili, con un tempo di trattamento di pochi millisecondi. Questa tecnologia permette di ottenere una serie di effetti sull’alimento che variano in rapporto all’entità del trattamento applicato e alla matrice fluida considerata. Pertanto, le alte pressioni di omogeneizzazione rappresentano una delle tecnologie maggiormente studiate in ragione delle loro buone opportunità applicative a livello industriale. Tale tecnologia viene comunemente applicata per modificare le proprietà funzionali di alcune macromolecole caratteristiche degli alimenti ed ha permesso l’ottenimento di prodotti di origine lattiero-casearia ed anche succhi di frutta caratterizzati da migliore texture, gusto, flavour e aumentata shelf-life. L’omogeneizzazione ad alta pressione, considerata come trattamento di sanitizzazione a freddo, è in grado di disattivare sia microrganismi patogeni che degradativi presenti in un determinato sistema, contribuendo a ridurre o contenere quindi lo sviluppo microbico nei prodotti alimentari. L’effetto di tale tecnologia, quando applicata a livelli compresi tra 60-200 MPa bar è stato valutato nei confronti di diversi patogeni quali Escherichia coli, Listeria monocytogenes, Yersinia enterocolitica, Staphylococcus aureus, Salmonella typhimurium microrganismi degradativi, come Bacillus subtilis e lieviti, deliberatamente inoculati in prodotti diversi.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In questo studio sono state prodotte 5 diverse tipologie di Squacquerone inoculate con St. thermophilus e con batteri lattici funzionali in forma planctonica o microincapsulata al fine di garantire la loro sopravvivenza, in ambienti caratterizzati da condizioni chimico-fisiche proibitive. Sono stati utilizzati Lb. crispatus BC4 e Lb. paracasei A13 caratterizzati da comprovata attività anti-Candida e battericida o probiotica, rispettivamente. I campioni sono stati caratterizzati a livello microbiologico, chimico-fisico, reologico, proteolitico ed organolettico durante la maturazione/conservazione a 4°C. I dati hanno dimostrato che l’incapsulazione non ha inciso sulla sopravvivenza dei ceppi funzionali in quanto la loro concentrazione è sempre stata costante. La proteolisi ha dimostrato un’evidente relazione tra il ceppo e le modalità della sua immissione nel prodotto: in presenza dei co-starter non incapsulati i processi litici sono accelerati rispetto al campione di controllo, mentre la cinetica di proteolisi viene influenzata negativamente dalle microcapsule. I campioni funzionali, dopo 4 giorni, sono risultati nettamente più apprezzati a livello sensoriale, indipendentemente dal tipo di inclusione dei microrganismi. A fine shelf-life i 5 Squacqueroni sono invece molto più simili tra loro. Di conseguenza, la microincapsulazione può essere vista come uno strumento per modulare le cinetiche di maturazione dello Squacquerone e il momento di immissione di questo sul mercato, per estendere la sua shelf-life ed allargare i mercati. In conclusione sia l’addizione dei co-starter in forma planctonica, che in forma microincapsulata con St. thermophilus, hanno permesso di produrre quattro diversi Squacqueroni identificabili come alimenti funzionali caratterizzati da specifici patterns proteolitici e organolettici. La microincapsulazione e la selezione dei ceppi sono da considerarsi strumenti utili alla innovazione e alla differenziazione dei prodotti lattiero-caseari.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Background Sweet cherries (Prunus avium L.) are a nutritious fruit which are rich in polyphenols and have high antioxidant potential. Most sweet cherries are consumed fresh and a small proportion of the total sweet cherries production is value added to make processed food products. Sweet cherries are highly perishable fruit with a short harvest season, therefore extensive preservation and processing methods have been developed for the extension of their shelf-life and distribution of their products. Scope and Approach In this review, the main physicochemical properties of sweet cherries, as well as bioactive components and their determination methods are described. The study emphasises the recent progress of postharvest technology, such as controlled/modified atmosphere storage, edible coatings, irradiation, and biological control agents, to maintain sweet cherries for the fresh market. Valorisations of second-grade sweet cherries, as well as trends for the diversification of cherry products for future studies are also discussed. Key Findings and Conclusions Sweet cherry fruit have a short harvest period and marketing window. The major loss in quality after harvest include moisture loss, softening, decay and stem browning. Without compromising their eating quality, the extension in fruit quality and shelf-life for sweet cherries is feasible by means of combination of good handling practice and applications of appropriate postharvest technology. With the drive of health-food sector, the potential of using second class cherries including cherry stems as a source of bioactive compound extraction is high, as cherry fruit is well-known for being rich in health-promoting components.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Thermal treatments and storage influence milk quality, particularly in low lactose milk as the higher concentration of reducing sugars can lead to the increased formation of the Maillard reaction products (MRPs). The control of the Amadori products (APs) formation is the key step to mitigate the Maillard reaction (MR) in milk. The use of fructosamine oxidases, (Faox) provided promising results. In this paper, the effects of Faox I were evaluated by monitoring the concentration of free and bound MRPs in low lactose milk during shelf life. Results showed that the enzyme reduced the formation of protein-bound MRPs down to 79% after six days at 37 °C. Faox I lowered the glycation of almost all the free amino acids resulting effective on basic and polar amino acids. Data here reported corroborate previous findings on the potentiality of Faox enzymes in controlling the early stage of the MR in foods.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

L’objectif principal de cette maîtrise était de développer des formulations d’épices capables de remplacer les nitrites et nitrates dans les produits carnés tout en gardant la même durée de conservation que ces derniers ainsi que leurs propriétés organoleptiques, antibactériennes et antioxydantes. Un criblage qualitatif puis quantitatif des épices a été réalisé et trois épices ont été sélectionnées, les clous de girofle, le cumin et la cannelle. Puis, des poudres de fruits ont été testées pour approcher la couleur rosée que donnent les échantillons contenant les nitrites. L’analyse sensorielle effectuée par la suite a fait ressortir le caractère sucré de la poudre de fruit et des propriétés très intéressantes de certaines formulations par rapport à l’ajout des nitrites. Enfin, une analyse technico-économique a été réalisée et a montré une très faible augmentation du coût de production des produits carnés en utilisant nos formulations d’épices et de poudre de fruit.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Le piante e gli animali presentano elementi comuni nel loro sistema di difesa contro gli agenti patogeni, come la sintesi diretta di enzimi idrolitici (chitinasi, glucanasi, proteinasi e ossidasi) e di peptidi antimicrobici (AMPs). Gli AMPs sono peptidi ampiamente espressi negli organismi animali (vertebrati e invertebrati) e nelle piante. Possono essere espressi costitutivamente o rapidamente indotti inseguito ad uno stimolo biotico, a differenti livelli cellulari, per interagire direttamente con l’agente infettante e/o per modulare la risposta immunitaria contro i patogeni. Tali peptidi sono oggi classificati in relazione alle loro caratteristiche biochimiche (carica netta) e/ o alle loro caratteristiche strutturali (composizione amminoacidica, struttura lineare o circolare). In base a queste caratteristiche le molecole possono essere distinte nei seguenti gruppi: 1) peptidi lineari ad alfa elica; 2) peptidi ciclici con β-sheets e due o più ponti disolfuro; 3) peptidi con alfa elica e β-sheets stabilizzati da ponti disolfuro; 4) peptidi con hairpin o loop stabilizzati da ponti disolfuro; 5) peptidi lineari con residui aminoacidici ripetuti, come prolina, glicina, triptofano o istidina; 6) piccoli peptidi con struttura avvolta o con una struttura secondaria non definita. Nonostante la loro diversità strutturale, i peptidi antimicrobici presentano la caratteristica comune di inibire la crescita di un largo spettro di microbi, quali Gram-positivi, Gram-negativi, funghi e in alcuni casi anche virus, tanto da far coniare il termine di “antibiotici naturali”. Negli ultimi anni è notevolmente incrementato l’interesse verso tali peptidi dal momento che dati scientifici hanno mostrato che questi non inducono lo sviluppo di meccanismi di resistenza nei microrganismi patogeni. Gli AMPs quindi potrebbero costituire una valida alternativa non solo in ambito sanitario, per la sostituzione di antibiotici di sintesi chimica e di origine microbiologica, ma potrebbero avere un importante utilizzo in campo industriale e nello sviluppo di nuovi sistemi di conservazione degli alimenti al fine di incrementare la loro “shelf-life”.