Ant Group Effects on the Insecticide and Dye Flow Among Atta sexdens rubropilosa (Hymenoptera: Formicidae) Workers

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adhesive Quality of Self-adhesive and Conventional Adhesive Resin Cement to Y-TZP Ceramic Before and After Aging Conditions

Purpose: This study evaluated the adhesive quality of simplified self-adhesive and conventional resin cements to Y-TZP in dry and aged conditions. Methods: Y-TZP ceramic blocks (N=192) (5 x 5 x 2 mm) were embedded in acrylic resin and randomly divided into two groups, based on surface conditioning: 96% isopropanol or chairside tribochemical silica coating and silanization. Conditioned ceramics were divided into four groups to receive the resin cements (Panavia F 2.0, Variolink II, RelyX U100 and Maxcem). After 24 hours, half of the specimens (n=12) from each group were submitted to shear bond strength testing (0.5 nun/minute). The remaining specimens were tested after 90 days of water storage at 37 degrees C and thermocycling (12,000x, 5 degrees C-55 degrees C). Failure types were then assessed. The data were analyzed using three-way ANOVA and the Tukey's test (alpha=0.05). Results: Significant effects of ceramic conditioning, cement type and storage conditions were observed (p<0.0001). The groups cleaned using alcohol only showed low bond strength values in dry conditions and the bond strength was reduced dramatically after aging. Groups conditioned using silica coating and silanization showed higher bond strengths both in dry and aged conditions. A high number of specimens failed prematurely prior to testing when they were cleaned using 96% isopropanol. Conclusion: Overall, silica coating and silanization showed higher, stable bond strengths with and without aging. The durability of resin-ceramic adhesion varied, depending on the adhesive cement type.

Effect of dentinal surface preparation on bond strength of self-etching adhesive systems

The aim of this study was to evaluate the effects of dentin surface treatments on the tensile bond strength (TBS) of the self-etching primer Clearfil SE Bond (CSE) and the one-step self-etching One-Up Bond F (OUB). The exposed flat dentin surfaces of twenty-four sound third molars were prepared with diamond bur at high-speed, carbide bur at low-speed or wet ground with #600 grit SiC paper. The adhesive systems were applied to the dentin surfaces and light-cured according to the manufacturers' instructions. A 6-mm high composite crown was incrementally built-up and each increment was light-cured for 40 seconds. After being stored in water (37°C/24 h), the samples were serially sectioned parallel to the long axis, forming beams (n = 20) with a cross-sectional area of approximately 0.8 mm 2. The specimens were tested in a Universal Testing Machine at 0.5 mm/min. The cross-sectional area was measured and the results (MPa) were analyzed by two-way ANOVA and Tukey Test (p < 0.05). Overall, the groups treated with CSE exhibited the highest TBS for all surface treatments. Dentin surfaces prepared with carbide bur at low speed reduced TBS in the CSE group; however, OUB was not affected by surface treatments. The effect of surface abrasive methods on TBS was material-dependent.

Interaction between total-etch and self-etch adhesives and conventional and self-adhesive resin cements

The aim of this study was to compare the bond strength to enamel between resin cements combined with total-etch and self-etch adhesive systems and a self-adhesive cement. Eighty bovine incisors had their buccal surface ground flat exposing a plane area in the enamel. Eighty Artglass resin cylinders measuring 3 mm in diameter and 4 mm in height were fabricated. The teeth were divided into eight groups of 10 teeth each and the resin cylinders were cemented with different adhesive systems and resin cements; G1: RelyX Unicem (self-adhesive cement); G2: H 3PO 4 + Single Bond + RelyX ARC; G3: AdheSE + Variolink II; G4: H 3PO 4 + Excite + Variolink II; G5: Xeno III + Enforce; G6: H 3PO 4 + Prime&Bond NT + Enforce; G7: Biatite Primers 1 and 2 + Bistite II DC; G8: H 3PO 4 + Bistite Primers 1 and 2 + Bistite II DC. After application of the adhesives, the cylinders were cemented according to manufacturer instructions. The specimens were submitted to 2000 thermal cycles at a temperature ranging from 5±5°C to 55±5°C, and shear bond strength was then tested at a variety of 1 mm/min. The data were analyzed by ANOVA and the Tukey's test (á=5%), obtaining a p value of 0.00. The following mean (±standard deviation) bond strength values were observed for each group: G1: 5.14(±0.99)a; G3: 16.23(±4.69)b; G7: 17.82(±3.66)b; G5: 18.48(±2.88)bc; G8: 20.15(±4.12)bc; G4: 22.85(±3.08)cd; G2: 24.96(±2.89)d; G6: 26.07(±1.69)d. Groups followed by the same letters did not differ significantly. For most of the resin cements tested, the application of adhesive systems using acid etching resulted in a higher bond strength when compared to the self-etch adhesive systems and to the self-adhesive cement.

Length of resin tags in pit-and-fissure sealants: all-in-one self-etching adhesive vs phosphoric acid etching.

PURPOSE: To investigate the penetration (tags) of adhesive materials into enamel etched with phosphoric acid or treated with a self-etching adhesive, before application of a pit-and-fissure sealant. MATERIALS AND METHODS: The sample comprised six study groups with six specimens each. Before pit-and-fissure sealing with the materials Clinpro SealantTM (Groups I and II), Vitro Seal ALPHA (Groups III and IV) and Fuji II LC (Groups V and VI), the teeth in Groups I, III, and V were etched with 35% phosphoric acid for 30 seconds. Teeth in Groups II, IV, and VI received application of the self-etching adhesive Adper Prompt L-Pop. The treated teeth were sectioned buccolingually, ground to 100-microm thickness, decalcified, and analyzed by conventional light microscopy at 400x magnification. RESULTS: The teeth etched with phosphoric acid exhibited significantly greater penetration than specimens treated with self-etching adhesive. CLINICAL SIGNIFICANCE: When compared with enamel treated with a self-etching adhesive, the penetration (tags) of adhesive materials into enamel was greater when applied on enamel etched with phosphoric acid.

Durability of the bond strength of self-adhesive resin cements to human dentin

This study subjected two self-adhesive resin cements and two conventional resin cements to dry and aging conditions, to compare their microtensile bond strengths (MTBS) to dentin. Using four different luting systems (n = 10), 40 composite resin blocks (each 5x5x4 mm) were cemented to flat human crown dentin surfaces. The specimens were stored in water for 24 hours (37°C), at which point each specimen was sectioned along two axes to obtain beams that were divided randomly into two groups: dry samples, which were tested immediately, and samples that were subjected to accelerated aging conditions (12, 000 thermocycles followed by storage for 150 days). The μTBS results were affected significantly by the luting system used (P < 40001). Only the μTBS of Rely-X Unicem was reduced significantly after aging; the μTBS remained stable or increased for the other self-adhesive resin cement and the two conventional cements.

Analysis of the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel

Objective: To analyze the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel. Material and Method: Twenty-four healthy human molars extracted for orthodontic reasons, were sectioned in the mesio-distal direction and divided into two groups (n=24) according to the sealant to be applied: GI - conventional sealant Climpro (3M/ESPE) and GII - self-etching sealant Enamel Loc (Premier Dental). The sealants were applied on flattened enamel in matrixes 1 mm in diameter, in accordance with the manufacturers' recommendations. The specimens were stored in distilled water at 37°C for 24 hours. After this, half the samples of both groups were submitted to 500 thermal cycles in 30s baths at temperatures between 5 and 55°C. Forty-eight hours after the samples were made, the microtensile shear test was performed in an Instron 4411 test machine, with a stainless steel wire with a cylindrical cross section of 0.2mm in diameter at a constant speed of 0.5mm/s. The bond strength values were submitted to ANOVA for 2 factors and the fracture patterns were examined under an optical microscope at 65X magnification. Results: Thermal cycling did not influence the bond strength of the two sealants. The conventional sealant Climpro presented a statistically higher microtensile shear bond strength (11.72MPa, 11.34MPa with and without cycling, respectively) than the self-etching sealant Enamel Loc (5.92MPa, 5.02MPa with and without cycling, respectively). Fracture pattern analysis showed the occurrence of 100% of adhesive failures for Enamel Loc, while the conventional sealant Climpro presented 95% of adhesive failures and 5% of mixed failures. Conclusion: The conventional sealant presented higher microtensile shear bond strength to dental enamel in comparison with the self-etching sealant. Thermal cycling did not affect the bond strength of the sealants used in this study. © 2011 Nova Science Publishers, Inc.

Physical inactivity and related barriers: A study in a community dwelling of older brazilians

This study sought to investigate the prevalence of physical inactivity and related barriers in older Brazilian adults. A cross-sectional, population-based study was conducted, and a stratified random sampling procedure was used. A total of 359 older adults were interviewed. The long version of the International Physical Activity Questionnaire (IPAQ) and the Questionnaire of Barriers to Physical Activity Practice were used to assess physical activity level and barriers, respectively. No statistically significant difference was observed on the prevalence of physical inactivity in either gender or age groups. Regarding barriers, the proportion of 9 out of 22 barriers was statistically significant between men and women. Self-reported physical inactivity/activity in older Brazilian adults continues to be a concern. Uncommonly, older males reported a higher prevalence of physical inactivity compared to their counterparts. Additionally, physical inactivity prevalence continued to increase with the aging process. Yet, personal barriers such as lack of time and poor health were strongly associated with physical inactivity. The results of this study may help health professionals and public policy makers to better address the issues related to a healthy lifestyle among older adults and promote physical activity among Brazilian older adults and in other countries with similar characteristics. © 2012 Sebastião Gobbi et al.

The efficacy of the self-adjusting file and ProTaper for removal of calcium hydroxide from root canals

Objective: The goal of this study was to evaluate the efficacy of the Self-Adjusting File (SAF) and ProTaper for removing calcium hydroxide [Ca(OH)2] from root canals. Material And Methods: Thirty-six human mandibular incisors were instrumented with the ProTaper system up to instrument F2 and filled with a Ca(OH)2-based dressing. After 7 days, specimens were distributed in two groups (n=15) according to the method of Ca(OH)2 removal. Group I (SAF) was irrigated with 5 mL of NaOCl and SAF was used for 30 seconds under constant irrigation with 5 mL of NaOCl using the Vatea irrigation device, followed by irrigation with 3 mL of EDTA and 5 mL of NaOCl. Group II (ProTaper) was irrigated with 5 mL of NaOCl, the F2 instrument was used for 30 seconds, followed by irrigation with 5 mL of NaOCl, 3 mL of EDTA, and 5 mL of NaOCl. In 3 teeth Ca(OH)2 was not removed (positive control) and in 3 teeth canals were not filled with Ca(OH)2 (negative control). Teeth were sectioned and prepared for the scanning electron microscopy. The amounts of residual Ca(OH)2 were evaluated in the middle and apical thirds using a 5-score system. Results: None of the techniques completely removed the Ca(OH)2 dressing. No difference was observed between SAF and ProTaper in removing Ca(OH)2 in the middle (P=0.11) and the apical (P=0.23) thirds. Conclusion: The SAF system showed similar efficacy to rotary instrument for removal of Ca(OH)2 from mandibular incisor root canals.

Avaliação da eficiência de adesão de um cimento resinoso autocondicionante (self-adhesive) sobre esmalte e dentina: efeito termociclagem e condicionamento dental : estudo in vitro

Pós-graduação em Odontologia Restauradora - ICT

Percepções de adolescentes de escola pública e de escola privada na cidade de Belém-PA acerca de saúde e doença mental

Estudos sobre saúde mental na adolescência destacam este tema como questão relevante, pois essa faixa etária, além de constituir-se como uma grande parcela da população que precisa e não procura atendimento, é identificada como um grupo etário vulnerável e de risco. A família e a escola têm sido consideradas como fatores de proteção à saúde mental de adolescentes. Sendo assim, precisa-se pensar em formas de intervenção mais eficazes, considerando o contexto familiar, cultural e social destes indivíduos. O objetivo do estudo foi investigar percepções sobre saúde e doença mental de adolescentes de escola pública e de escola privada na cidade de Belém-PA, bem como as principais redes de apoio e estratégias de cuidado utilizadas pelos adolescentes. Realizou-se um estudo transversal, do tipo quantitativo, no qual participaram 60 adolescentes, de ambos os sexos, e seus cuidadores. Os adolescentes tinham idades entre 12 a 17 anos, sendo 30 alunos de escola pública, localizada em um bairro periférico, e 30 de escola privada, localizada em um bairro central, na cidade de Belém-PA. Os cuidadores eram do sexo feminino, com idade entre 25 a 57 anos. Como instrumentos foram utilizados: roteiro de entrevista familiar, roteiro de entrevista com os coordenadores das escolas e questionário sobre saúde e doença mental e sobre serviços de saúde (versão para adolescente). Os resultados dos questionários foram analisados preferencialmente pelo teste do Qui-quadrado e o teste G para amostras independentes. Todo o processamento estatístico foi realizado no software BioEstat versão 5.2. Os resultados obtidos nas entrevistas permitiram a análise de aspectos socioeconômicos e de fatores de risco e de proteção na família dos adolescentes. Os resultados obtidos com os questionários revelaram que as percepções dos adolescentes da escola pública acerca da saúde mental estavam associadas a não ser tão sensível/frágil e a pensar positivo, ser otimista. Na escola privada, estavam associadas a sentir-se equilibrado e ser algo muito importante. Quanto às percepções de doença mental, na escola pública estavam relacionadas ao momento em que o corpo não está bem e a quando profissionais aconselham um tratamento; na escola privada, a ter sentimentos feridos e ser algo que não se percebe logo. Com relação à origem das ideias sobre saúde/doença mental, não houve real diferença entre os grupos. No que tange à religião, houve discordância apenas em relação a cura da doença mental. Como estratégia de enfrentamento, na escola pública esta esteve relacionada a falar com alguém sobre o problema enquanto na escola privada os adolescentes relataram que não procuravam ajuda. A mãe foi apontada como principal na busca de ajuda pelos adolescentes da escola pública; na escola particular, a principal referência foi o médico da família. A principal barreira para os adolescentes da escola pública no acesso ao serviço de saúde mental foi não saber o que o psicólogo/psiquiatra vai fazer com ele, e na escola privada foi não querer ser gozado/caçoado. Nos dois grupos, os principais problemas em saúde mental relatados foram problemas na escola e de comportamento. Os adolescentes de escola privada responderam que somente às vezes sentem-se sozinhos e felizes, enquanto na escola pública, os adolescentes afirmaram que sempre estiveram de bom humor e satisfeitos com a vida. Discute-se a necessidade de promover fatores de proteção à saúde mental de adolescentes.

Clinical evaluation of postoperative sensitivity using self-etching adhesives containing glutaraldehyde

The present clinical study aimed to assess the postoperative sensitivity (POS) after 48 hours and seven days in occlusal restorations bonded with three different adhesive systems, two of them containing glutaraldehyde. The restorative procedures were performed using the three-step etch-and-rinse Adper SBMP-Plus adhesive (SBMP), the two-step etch-and-rinse Gluma Comfort One Bond + Desensitizer adhesive (GC+D) and the all-in-one self-etching/priming I Bond (IB) adhesive, which also has glutaraldehyde in its formula. All cavities were restored with Filtek Supreme nanoparticle composite resin. After 48 hours and seven days the patients were recalled and the postoperative sensitivity evaluated. The data analyzed by non-parametric Friedman test showed no significant differences in POS among the three tested groups after 48 hours and seven days.

In vitro analysis of shear bond strength and adhesive remnant index comparing light curing and self-curing composites

OBJETIVO: Avaliar in vitro a resistência ao cisalhamento de compósitos autopolimerizáveis (Concise e Alpha Plast) e fotopolimerizáveis (Transbond XT e Natural Ortho) utilizados na colagem de braquetes metálicos da marca Morelli, analisando o índice de adesivo remanescente (ARI) e da integridade da superfície do esmalte por meio de microscopia eletrônica de varredura (MEV). MÉTODOS: foram utilizados 40 pré-molares humanos extraídos. As raízes dos dentes foram incluídas em gesso-pedra especial, no interior de tubos de PVC usados para a confecção dos corpos de prova. Esses corpos de prova foram divididos em quatro grupos: grupo G1, braquetes associados ao compósito Concise; grupo G2, braquetes associados ao compósito Alpha Plast; grupo G3, braquetes associados ao compósito Transbond XT; e grupo G4, braquetes associados ao compósito Natural Ortho. Os grupos foram submetidos ao teste de cisalhamento em máquina universal de ensaios, a uma velocidade de 0,5mm por minuto. RESULTADOS: houve diferença estatística entre os grupos G3 e G4, sendo os valores de G4 superiores; no entanto, não foram encontradas diferenças estatisticamente significativas entre os grupos G1, G2 e G3 e G1, G2 e G4. Na análise do ARI não foram encontradas diferenças estatísticas entre os grupos, predominando escores baixos. De acordo com a análise da MEV, constatou-se o rompimento dos compósitos e a integridade do esmalte entre os grupos. CONCLUSÃO: a resistência ao cisalhamento foi satisfatória e semelhante entre os compósitos utilizados, sendo que a resina Natural Ortho apresentou-se superior à Transbond XT.

Efetividade dos florais de Bach no bem estar espiritual de estudantes universitários: ensaio clínico randonizado duplo cego

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ethical Care of the Self and the Teacher in the Pedagogical Relationship: Reflections Based on the Latest Foucault

Our conception of education is that it is the responsible action whereby man becomes human, trains and faces the challenges that life and the world present, as man enters a larger, shared cultural tradition and thus joins the world. However such sharing implies that we must not just rely on tradition, but remain open to new ideas. It is essential for schooling to preserve a field where the art of living intersects with the world for which future generations are being prepared. It is in this field of intersection that this essay seeks to discuss Michel Foucault's thought, care of the self and the role played by others in the acquisition of ethical attitudes pertaining to one's conduct in life. Through reconstructing Foucault's ideas, we elaborate on the hypothesis that, before morally shaping students, teaching them values, or aiding in their skill acquisition in the sense prevailing in schooling today, it is important to understand the notion of care of the self (and how the notion implies interaction with others for effective care of the self). Care of the self is vital for thoroughly understanding the relationships between ethics and education in school. We particularly examine how Foucault's ideas and his analysis of the teacher's role in shaping the student's life conduct can help educators rethink pedagogical action in an ethical sense and find within it a certain openness to the formation of attitudes in educators and students