Pressure field in the cathode-anode region of a high-power klystron amplifier

The pressure field of a high-power klystron amplifier in the cathode and anode region was investigated. The investigation was performed using a 1.3 GHz, 100 A and 240 kV high-power klystron with five reentrant coaxial cavities, assembled in cylindrical drift tube 1.2 m long. The diffusion equation in mathematical model was also solved by using a 3-D finite element method code, in order to obtain pressure profile in region of interest. The results show that density profile of molecules between cathode-anode region was determined, where cathode pressure is approximately 10% higher than anode pressure.

Photoluminescence-structure relationships in ormosils for integrated optical devices

Planar waveguides with low losses in the infrared (from 0.6-1.1 dB/cm) were prepared with sol-gel derived poly(oxyethylene)/siloxane hybrid doped with zirconium(IV) n-propoxide (ZPO) and methacryloxypropyltrimethoxysilane (MAPTMS). The doped nanohybrids were characterized by small angle X-ray scattering, 29Si nuclear magnetic resonance and photoluminescence spectroscopy and compared with the undoped hybrid material. The results indicate an effective interaction between the zirconium particles and the siliceous nanodomains. © 2005 Materials Research Socicty.

Structure and properties of Ti4+-Ureasil organic-inorganic hybrids

Hybrid planar waveguides were prepared from Ti4+-acetylacetone (acac)-Ureasil sols deposited on glass substrates. Structural features have been investigated by spectroscopic measurements (Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS) and Raman scattering) and Small Angle X-ray Scattering (SAXS). Addition of Ti 4+-acac to the ureasil (Ti:Si molar ratio 1:1) leads to the formation of bonds between the Ti complex and the siloxane groups, whereas further addition of Ti4+ (Ti:Si molar ratio 5:1) leads to the additional formation of titanium-rich nanoclusters. The optical parameters of the waveguides such as refractive index, thickness, propagating modes and attenuation coefficient were measured at 632.8, 543.5 and 1550 nm by the prism coupling technique. The refractive index can be tuned by the Ti4+ relative content. The few microns thick planar waveguides support well confined propagating modes with low attenuation loss for all compositions. ©2006 Sociedade Brasileira de Química.

One-dimensional superfluid Bose-Fermi mixture: Mixing, demixing, and bright solitons

We study an ultracold and dilute superfluid Bose-Fermi mixture confined in a strictly one-dimensional (1D) atomic waveguide by using a set of coupled nonlinear mean-field equations obtained from the Lieb-Liniger energy density for bosons and the Gaudin-Yang energy density for fermions. We consider a finite Bose-Fermi interatomic strength gbf and both periodic and open boundary conditions. We find that with periodic boundary conditions-i.e., in a quasi-1D ring-a uniform Bose-Fermi mixture is stable only with a large fermionic density. We predict that at small fermionic densities the ground state of the system displays demixing if gbf >0 and may become a localized Bose-Fermi bright soliton for gbf <0. Finally, we show, using variational and numerical solutions of the mean-field equations, that with open boundary conditions-i.e., in a quasi-1D cylinder-the Bose-Fermi bright soliton is the unique ground state of the system with a finite number of particles, which could exhibit a partial mixing-demixing transition. In this case the bright solitons are demonstrated to be dynamically stable. The experimental realization of these Bose-Fermi bright solitons seems possible with present setups. © 2007 The American Physical Society.

Waveguide features in self-patternable amine functionalized organic-inorganic hybrids

We report the use of organic-inorganic sol-gel derived poly(oxyehylene)/ siloxane hybrid doped with methacrylic acid modified zirconium (IV) n-propoxide for the fabrication of low cost waveguides trough direct UV laser writing. The organic-inorganic hybrids were processed as monoliths with size and shape control. The effective guiding region was identified and the number of modes was estimated via mode field analyses. A grating was successfully superimposed on the channel and the respective reflection spectrum was measured, enabling the determination of the guiding region dimension, the calculation of the effective refractive index of the guided mode. © 2007 IEEE.

Thermal tunability of photonic bandgaps in photonic crystal fibers selectively filled with nematic liquid crystal

We address the bandgap effect and the thermo-optical response of high-index liquid crystal (LC) infiltrated in photonic crystal fibers (PCF) and in hybrid photonic crystal fibers (HPCF). The PCF and HPCF consist of solid-core microstructured optical fibers with hexagonal lattice of air-holes or holes filled with LC. The HPCF is built from the PCF design by changing its cladding microstructure only in a horizontal central line by including large holes filled with high-index material. The HPCF supports propagating optical modes by two physical effects: the modified total internal reflection (mTIR) and the photonic bandgap (PBG). Nevertheless conventional PCF propagates light by the mTIR effect if holes are filled with low refractive index material or by the bandgap effect if the microstructure of holes is filled with high refractive-index material. The presence of a line of holes with high-index LC determines that low-loss optical propagation only occurs on the bandgap condition. The considered nematic liquid crystal E7 is an anisotropic uniaxial media with large thermo-optic coefficient; consequently temperature changes cause remarkable shifts in the transmission spectrums allowing thermal tunability of the bandgaps. Photonic bandgap guidance and thermally induced changes in the transmission spectrum were numerically investigated by using a computational program based on the beam propagation method. © 2010 SPIE.

Utilization of surgical trepan for the obtainment of calvarial autogenous bone graft in maxillary reconstructions

Maxillomandibular reconstructions are traditionally performed by means of autogenous bone grafts collected from intraoral donor areas and extraoral donor areas such as clavicle, iliac bone, rib, and tibia. The calvarial bone has been studied as an alternative donor area, with a low incidence of complications and minimal postoperative morbidity. Complications such as dural lacerations associated with cerebrospinal fluid leakage and extradural and subdural bleeding were minimized due to the use of surgical trepan, allowing the diploic layer delimitation before the osteotomy, preserving the internal calvarial cortical. The purpose of this article is to suggest a new technique for the obtainment of calvarial bone grafts with surgical trepan.

Unusually rapid growth of brown tumour in the mandible after parathyroidectomy associated with the presence of a supernumerary parathyroid gland

The aim of this study is to report the case of a quick growing brown tumour in the jaw after a parathyroidectomy due to the presence of a rare fifth parathyroid gland. The patient had chronic renal disease and the diagnosis was tertiary hyperparathyroidism. Thirty days after the parathyroidectomy, the patient returned with a significant increase in the tumour size. The suspicion of a supernumerary gland was confirmed by parathyroid scintigraphy. The treatment of brown tumour is dependent on the treatment of the hyperparathyroidism. However, curettage should be considered if a large lesion is disturbing mastication. In conclusion, this case should attract the attention of general practitioner dentists, since they may be the first professionals who have contact with the patient with a brown tumour in the jaws. Likewise, this case emphasises the importance of knowing the type of hyperparathyroidism involved to allow for effective treatment planning. © 2011 European Association for Cranio-Maxillo-Facial Surgery.

Analysis of primary stability of dental implants inserted in different substrates using the pullout test and insertion torque

The aim of the study was to evaluate mechanical behavior of implants inserted in three substrates, by measuring the pullout strength and the relative stiffness. 32 implants (Master Porous-Conexao, cylindrical, external hexagon, and surface treatment) were divided into 4 groups (n = 8): pig rib bone, polyurethane Synbone, polyurethane Nacional 40 PCF, and pinus wood. Implants were installed with the exact distance of 5 mm of another implant. The insertion torque (N·cm) was quantified using the digital Kratos torque meter and the pullout test (N) was performed by an axial traction force toward the long axis of the implant (2 min/mm) through mount implant devices attached to a piece adapted to a load cell of 200 Kg of a universal testing machine (Emic DL10000). Data of insertion torque and maximum pullout force were submitted to one-way ANOVA and Bonferroni tests (α = 0.05). Polyurethane Nacional 40 PCF and pinus wood showed the highest values of insertion torque and pullout force, with significant statistical difference (P < 0.05) with other groups. The analysis showed stiffness materials with the highest values for primary stability. © 2013 Nathalia Ferraz Oliscovicz et al.

Performance, survivability and carcass traits of crossbred lambs from five paternal breeds with local hair breed Santa Inês ewes

The present study aimed to evaluate the performance, survivability and carcass traits of crossbred lambs. Data from 299 lambs born to 209 ewes were used. The dams were from a local hair breed (Santa Inês) and five breeds of sires were used: Dorper (DR), Ile de France (IF), Hampshire Down (HD), Texel (TX) and Santa Inês (SI). The lambs were weighed at birth, weaning and slaughter. Fasting body weight, skin thickness, hot and cold carcass weight, carcass yield and carcass length were measured at slaughter. Carcasses were separated into commercial cuts: neck, shoulder, rib, belly, loin and leg. Leg length and circumference were measured. Analyses of variances using MIXED procedure in SAS® were carried out for weights and carcass traits. Factor, discriminant and canonical analysis were carried out. Mortality data of animals from birth until slaughter was analyzed using logistic regression. The HD animals had the highest mortality rate. TX lambs had similar growth rate and survivability compared to DR and IF and had better carcass traits than these genetic groups. Therefore, this breed can be used as paternal breed to crossbreeding with Santa Inês dams. Santa Inês animals did not differ in growth from birth until slaughter compared to crossbred animals, which highlights the potential of this naturalized breed for meat production. Moreover, there is a great variability inside this breed for carcass and growth traits which may undergo great improvement through selection programs. © 2013 Elsevier B.V.

Anatomy of scapes, bracts, and leaves of Paepalanthus sect. Diphyomene (Eriocaulaceae, Poales) and its taxonomic implications

Paepalanthus sect. Diphyomene comprises 18 species with a convoluted taxonomic history. Aiming to correlate anatomical structures with the systematics of this group and its relatives, we studied the anatomy of scapes, reproductive axis bracts, and leaves of 20 Paepalanthus species. Bracts and leaves show differences in epidermal cell thickening; mesophyll width; vascular bundle arrangement; presence or absence of a hypodermis; types of cells in the vascular bundle sheath extensions; margin shape and composition; and presence or absence of aquiferous parenchyma. Scapes differ in contour, rib number, and pith size. Some diagnostic characters found are presence of aquiferous parenchyma and absence of vascular bundle sheath extensions in leaves of P. urbanianus; vascular bundles decreasing in size towards the margin of leaves and bracts, and scapes with a triangular contour in P. flaccidus; scapes with nine ribs in P. acanthophyllus and ten in P. macer. All anatomical features are summarized in tables. These results aid in the identification and characterization of the species of P. sect. Diphyomene. They also support the current section circumscription, reinforcing the relevance of the anatomical characters in order to define natural groups. © 2012 The New York Botanical Garden.

Estimates of genetic parameters for carcass, growth and reproductive traits in Nellore cattle

The objective of this study was to estimate genetic parameters for female mature weight (FMW), age at first calving (AFC), weight gain from birth to 120 days (WG_B_120), from 210 to 365 days (WG_210_365), rib eye area (REA), back fat thickness (BF), rump fat (RF) and body weight at scanning date (BWS) using single and multiple-trait animal models by the REML method from Nellore cattle data. The estimates of heritability ranged from 0.163±0.011 for WG_210_365 to 0.309±0.028 for RF using the single-trait model and from 0.163±0.010 for WG_210_365 to 0.382±0.025 for BWS using the multiple-trait model. The estimates of genetic correlations ranged from -0.35±0.08 between AFC with BF to 0.69±0.04 between WG_B_120 with BWS. Selection for weights gains, REA, and BWS can improve FMW. © 2013 Elsevier B.V.

República Dominicana: orientaciones estratégicas para la competitividad agroempresarial 2011-2030. Fase estratégica 2011-2016. Propuestas para el diálogo agropecuario nacional

XI Encuentro Nacional de Dirigentes del Sector Agropecuario. Puerto Plata, República Dominicana 5 a 7 de agosto de 2010

Aderência aço-concreto: uma análise do comportamento do concreto fabricado com resíduos de borracha

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)