Biotic factors and occurrence of Lutzomyia longipalpis in endemic area of visceral leishmaniasis, Mato Grosso do Sul, Brazil

The relationships between environmental exposure to risk agents and health conditions have been studied with the aid of remote sensing imagery, a tool particularly useful in the study of vegetation cover. This study aims to evaluate the influence of environmental variables on the spatial distribution of the abundance of Lutzomyia longipalpis and the reported canine and human visceral leishmaniasis (VL) cases at an urban area of Campo Grande, state of Mato Grosso do Sul. The sandfly captures were performed in 13 residences that were selected by raffle considering four residences or collection station for buffer. These buffers were generated from the central house with about 50, 100 and 200 m from it in an endemic area of VL. The abundance of sandflies and human and canine cases were georreferenced using the GIS software PCI Geomatica. The normalized difference vegetation index (NDVI) and percentage of land covered by vegetation were the environmental variables extracted from a remote sensing IKONOS-2 image. The average NDVI was considered as the complexity of habitat and the standard deviation as the heterogeneity of habitat. One thousand three hundred sixty-seven specimens were collected during the catch. We found a significant positive linear correlation between the abundance of sandflies and the percentage of vegetation cover and average NDVI. However, there was no significant association between habitat heterogeneity and the abundance of these flies.

Variability of ascending aorta diameter measurements as assessed with electrocardiography-gated multidetector computerized tomography and computer assisted diagnosis software.

Recently, morphometric measurements of the ascending aorta have been done with ECG-gated multidector computerized tomography (MDCT) to help the development of future novel transcatheter therapies (TCT); nevertheless, the variability of such measurements remains unknown. Thirty patients referred for ECG-gated CT thoracic angiography were evaluated. Continuous reformations of the ascending aorta, perpendicular to the centerline, were obtained automatically with a commercially available computer aided diagnosis (CAD). Then measurements of the maximal diameter were done with the CAD and manually by two observers (separately). Measurements were repeated one month later. The Bland-Altman method, Spearman coefficients, and a Wilcoxon signed-rank test were used to evaluate the variability, the correlation, and the differences between observers. The interobserver variability for maximal diameter between the two observers was up to 1.2 mm with limits of agreement [-1.5, +0.9] mm; whereas the intraobserver limits were [-1.2, +1.0] mm for the first observer and [-0.8, +0.8] mm for the second observer. The intraobserver CAD variability was 0.8 mm. The correlation was good between observers and the CAD (0.980-0.986); however, significant differences do exist (P<0.001). The maximum variability observed was 1.2 mm and should be considered in reports of measurements of the ascending aorta. The CAD is as reproducible as an experienced reader.

Optimización de los recursos de red de una organización mediante el uso de un servidor dedicado basado en software libre

Estudio de optimización de recursos de red basado en la utilización de un servidor dedicado gestionado mediante software libre.

Sistema de Administración de Propiedades Proyecto de Software Libre Wakodi

El trabajo se centra en proporcionar una solución informática para la Administración de Propiedades haciendo uso de nuevas tecnologías y a su vez dotar de las herramientas necesarias para la construcción de una comunidad. El desarrollo de la solución pasa por la descripción de las herramientas empleadas y las etapas para su construcción, que incluyen el análisis, diseño, implementación y posterior implantación. Se hace énfasis en el Framework elegido para demostrar las ventajas de su aplicación. En la construcción de la comunidad se describen las herramientas utilizadas para la difusión del proyecto que incluyen la publicación de una página del proyecto, el uso de redes sociales y páginas publicitarias y la puesta en marcha de un software de colaboración para la administración del desarrollo del proyecto.

Viri, Remote execution of Python scripts

Viri is a system for automatic distribution and execution of Python code on remote machines. This is especially useful when dealing with a large group of hosts.With Viri, Sysadmins can write their own scripts, and easily distribute and execute them on any number of remote machines. Depending on the number of computers to administrate, Viri can save thousands of hours, that Sysadmins would spend transferring files, logging into remote hosts, and waiting for the scripts to finish. Viri automates the whole process.Viri can also be useful for remotely managing host settings. It should work together with an application where the information about hosts would be maintained. This information can include cron tasks, firewall rules, backup settings,... After a simple Integration of this application with your Viri infrastructure, you can change any settings in the application, and see how it gets applied on the target host automatically.

Open source software expectations in retail businesses of Igualada : an exploratory study

The emergence of open source software in the last years has become a common topic of study in different fields, from the most technical characteristics to the economical aspects. This paper examines the current status about the literature dealing with economics of open source and explores the uses, infrastructure and expectations of retail businesses and institutions of the town of Igualda about it. This qualitative case study finds out that the current equipment and level of uses of ICTs are low and that the current situation of the town stores is receptive to a potential introduction of open source software.

Using free data mining software and clustering algorithms to find predictors from student qualifications

In this project a research both in finding predictors via clustering techniques and in reviewing the Data Mining free software is achieved. The research is based in a case of study, from where additionally to the KDD free software used by the scientific community; a new free tool for pre-processing the data is presented. The predictors are intended for the e-learning domain as the data from where these predictors have to be inferred are student qualifications from different e-learning environments. Through our case of study not only clustering algorithms are tested but also additional goals are proposed.

Búsqueda, selección e implantación de un sistema online de software libre para revisión por pares en congresos científicos

Este proyecto tiene como objetivo implementar un sistema libre bajo GNU/Linux para la recepción y evaluación de trabajos presentados a un congreso argentino sobre sistemas embebidos. Además, se piensa en un futuro en organizar un evento de software libre con revisión de pares, para lo cual sería coherente utilizar un sistema con licencia de software libre.

Integrating Metalib and SFX into the BV-SSPA

Introduction To guarantee the success of a virtual library it is essential that all users can access all the library resources independently of the user’s location. Achieving this goal in the Andalusian Public Health System has been a particularly difficult task, due to it is made up of 10 research centers and 95.000 health-care professionals. Aims Since the BV-SSPA started three years ago, one of its mayor aims has been to provide remote access to all its resources in this complex scenario, as well as facilitate the access to the virtual library to both professionals and citizens. IP access was guaranteed because health-care professionals could access everything from their workplaces thanks to the intranet, but it was restricted when they were not there. The BV-SSPA solved this problem by installing a federated authentication and authorization system called PAPI and a PAPI rewriting proxy. After three years the BV-SSPA has met a new challenge: adapting its federated access system to Metalib and SFX, specifically the access management module PDS had to be connected with the existing PAPI system. This new challenge came along with the introduction of a new metasearcher and link resolver. Material and Methods Initially there were three independent systems: • A Metalib and SFX PDS module, • A federated authentication and authorization system: PAPI. • A PAPI Rewriting Proxy. The chosen solution went through the reutilization of the existing software. To achieve this goal, a PHP connector between these applications was developed and several modules in the PDS configuration were modified. On the other hand, providing a simplified access to Metalib has been solved using Xerxes and integrating it in a Drupal website. Results Thanks to this connector the BV-SSPA was able to get all its users remotely accessing its new metasearcher without changing the way they used to validate, or without having to remember a new username and password. Futhermore, thanks to Xerxes, it is possible to use Metalib from a simple interface and without having to leave the BV-SSPA website to go its native interface.

AUVReport : Software de control y generación de informes para Vehículos Autónoos Submarinos

Desarrollo de software para el control de calidad y la generación automatizada de informes técnicos sobre ficheros de estado generados por AUV (vehículos autónomos submarinos).

ERP vs software de gestió a entorns complexos de producció

L'objectiu principal de l'estudi és fer una avaluació d'una possible introducció a l'ERP d'un entorn complex de producció com pot ser el món de l'electrònica. Partirem de la hipòtesi que l'empresa vol substituir el software de gestió que fa servir actualment, i que ha estat desenvolupat internament, per plantejar la possibilitat d'introduir aquest entorn sota l'ERP actual o utilitzar un software de gestió de tercers.

ApplicationMap : Administración web y comercio electrónico en entornos de software libre

Este proyecto tiene como objetivo desarrollar las herramientas necesarias para poder crear un mapa conceptual de las aplicaciones de una organización, representar gráficamente este mapa y controlar el estado de cada aplicación. En concreto, se trata de desarrollar un formato XML que permita identificar y describir una aplicación, detallar con qué tecnología está desarrollada, qué componentes utiliza, especificar las interacciones o dependencias con otros sistemas, etc.

JULIDE: a software tool for 3D reconstruction and statistical analysis of autoradiographic mouse brain sections.

In this article we introduce JULIDE, a software toolkit developed to perform the 3D reconstruction, intensity normalization, volume standardization by 3D image registration and voxel-wise statistical analysis of autoradiographs of mouse brain sections. This software tool has been developed in the open-source ITK software framework and is freely available under a GPL license. The article presents the complete image processing chain from raw data acquisition to 3D statistical group analysis. Results of the group comparison in the context of a study on spatial learning are shown as an illustration of the data that can be obtained with this tool.

Modelling of Mercury’s surface composition and remote detection from the orbit with the BepiColombo Mercury Planetary Orbiter

It can be assumed that the composition of Mercury’s thin gas envelope (exosphere) is related to thecomposition of the planets crustal materials. If this relationship is true, then inferences regarding the bulkchemistry of the planet might be made from a thorough exospheric study. The most vexing of allunsolved problems is the uncertainty in the source of each component. Historically, it has been believedthat H and He come primarily from the solar wind, while Na and K originate from volatilized materialspartitioned between Mercury’s crust and meteoritic impactors. The processes that eject atoms andmolecules into the exosphere of Mercury are generally considered to be thermal vaporization, photonstimulateddesorption (PSD), impact vaporization, and ion sputtering. Each of these processes has its owntemporal and spatial dependence. The exosphere is strongly influenced by Mercury’s highly ellipticalorbit and rapid orbital speed. As a consequence the surface undergoes large fluctuations in temperatureand experiences differences of insolation with longitude. We will discuss these processes but focus moreon the expected surface composition and solar wind particle sputtering which releases material like Caand other elements from the surface minerals and discuss the relevance of composition modelling