Review of doctoral research in second-language teaching and learning in Australia (2003–2006)

This article reviews recent doctoral research in Australian universities in the area of language teaching and learning. Doctoral work in three main areas of research concentration is described: language teaching, language learning, and writing. The authors whose studies are reviewed are graduates of the Australian National University, Griffith University, Macquarie University, the University of Technology, Sydney, the University of Sydney, the University of New South Wales, the University of Melbourne, Monash University, La Trobe University, Deakin University and Murdoch University.

Community accessibility of health information and the consequent impact for translation into community languages

This paper reports on a research project that investigated the accessibility of health information and the consequent impact for translation into community languages. This is a critical aspect of the mediation of intercultural and interlingual communication in the domain of public health information and yet very little research has been undertaken to address such issues. The project was carried out in collaboration with the New South Wales Multicultural Health Communication Service (MHCS), which provides advice and services to state-based health professionals aiming to communicate with non-English speaking communities. The research employed a mixed-method and action research based approach involving two phases. The primary focus of this paper is to discuss major quantitative findings from the first pilot phase, which indicated that there is much room to improve the way in which health information is written in English for effective community-wide communication within a multilingual society.

3.46 Ga Apex chert 'microfossils' reinterpreted as mineral artefacts produced during phyllosilicate exfoliation

We acknowledge the facilities, scientific and technical assistance of the Australian Microscopy & Microanalysis Research Facility at: Centre for Microscopy Characterisation and Analysis, The University of Western Australia; Electron Microscopy Unit, The University of New South Wales. These facilities are funded by the Universities, State and Commonwealth Governments. DW was funded by the European Commission and the Australian Research Council (FT140100321). This is ARC CCFS paper number XXX. We acknowledge Martin van Kranendonk, Owen Green, Cris Stoakes, Nicola McLoughlin, the late John Lindsay and the Geological Survey of Western Australia for fieldwork assistance, Thomas Becker for assistance with Raman microspectroscopy, Anthony Burgess from FEI for the preparation of one of the TEM wafers, and Russell Garwood, Tom Davies, Imran Rahman & Stephan Lautenschlager for training and advice on the SPIERS and AVIZO software suites. We thank Chris Fedo and an anonymous reviewer for comments that improved the manuscript.

3.46 Ga Apex chert 'microfossils' reinterpreted as mineral artefacts produced during phyllosilicate exfoliation

We acknowledge the facilities, scientific and technical assistance of the Australian Microscopy & Microanalysis Research Facility at: Centre for Microscopy Characterisation and Analysis, The University of Western Australia; Electron Microscopy Unit, The University of New South Wales. These facilities are funded by the Universities, State and Commonwealth Governments. DW was funded by the European Commission and the Australian Research Council (FT140100321). This is ARC CCFS paper number XXX. We acknowledge Martin van Kranendonk, Owen Green, Cris Stoakes, Nicola McLoughlin, the late John Lindsay and the Geological Survey of Western Australia for fieldwork assistance, Thomas Becker for assistance with Raman microspectroscopy, Anthony Burgess from FEI for the preparation of one of the TEM wafers, and Russell Garwood, Tom Davies, Imran Rahman & Stephan Lautenschlager for training and advice on the SPIERS and AVIZO software suites. We thank Chris Fedo and an anonymous reviewer for comments that improved the manuscript.

Dendrogeochemical Study of a Copper Deposit in Black Springs, Australia

The Bushranger Copper project is a known porphyry-style copper deposit located roughly 150 km west of Sydney in New South Wales, Australia. Monterey pines (Pinus radiata) growing over the mineralization were cored and their rings were counted. Segments of the core representing growth between 2003 and 2008 were selected, digested in nitric acid, and analyzed via ICP-MS. This time span was selected because there was the least variation in tree ring width among all samples during these years, indicating uniform growth. The relative concentrations of the pathfinder elements Al, Cu, Mo, Pb and Zn were highest in the south-western corner of the area. Based on the data this area is the most prospective area to conduct further exploration efforts.

A guideline to improve qualitative social science publishing in ecology and conservation journals

A rise in qualitative social science manuscripts published in ecology and conservation journals speaks to the growing awareness of the importance of the human dimension in maintaining and improving Earth’s ecosystems. Given the rise in the quantity of qualitative social science research published in ecology and conservation journals, it is worthwhile quantifying the extent to which this research is meeting established criteria for research design, conduct, and interpretation. Through a comprehensive review of this literature, we aimed to gather and assess data on the nature and extent of information presented on research design published qualitative research articles, which could be used to judge research quality. Our review was based on 146 studies from across nine ecology and conservation journals. We reviewed and summarized elements of quality that could be used by reviewers and readers to evaluate qualitative research (dependability, credibility, confirmability, and transferability); assessed the prevalence of these elements in research published in ecology and conservation journals; and explored the implications of sound qualitative research reporting for applying research findings. We found that dependability and credibility were reasonably well reported, albeit poorly evolved in relation to critical aspects of qualitative social science such as methodology and triangulation, including reflexivity. Confirmability was, on average, inadequately accounted for, particularly with respect to researchers’ ontology, epistemology, or philosophical perspective and their choice of methodology. Transferability was often poorly developed in terms of triangulation methods and the suitability of the sample for answering the research question/s. Based on these findings, we provide a guideline that may be used to evaluate qualitative research presented in ecology and conservation journals to help secure the role of qualitative research and its application to decision making.

Stout Whiting Fishery Summary : Commercial Quota Setting for 2017

This fishery assessment report describes the commercial stout whiting fishery operation along Australia’s east coast between Sandy Cape and the Queensland-New South Wales border. The fishery is identified by a T4 symbol. This study follows methods applied in (O'Neill & Leigh, 2016a) and extends the results of that study by using the latest data available up to end of March 2016. The fishery statistics reported herein are for fishing years 1991 to 2016. This study analysed stout whiting catch rates from both Queensland and New South Wales (NSW) for all vessels, areas and fishing gears. The 2016 catch rate index from Queensland and NSW waters was 0.86. This means that the 2016 catch rate index was 86% of the mean standardised catch rate. Results showed that there was a stable trend in catch rates from 2012 to 2016, as in the previous study (O'Neill & Leigh, 2016a), with the 2015 and 2014 catch rates 85% of the mean catch rate. The fish-length frequency and age-length-otolith data were translated using two models which showed: • Where patterns of fish age-abundance were estimated from the fish-length frequency and age-length data, there were slightly decreased estimated measures of fish survival at 38% for 2014, compared to fish survival estimates in 2013 at 40%. The 2014 and 2015 estimated age structure was dominated by 1+ and 2+ old fished, with a slightly higher frequency of age 2 - 3 fish for 2015. • Where only the age-length data were used, estimates showed that from 2011 to 2014 the survival index increased. The estimated survival index increased from 35% in 2013 to 64% in 2014, indicating stronger survival of fish as they recruited and aged. Together the stout whiting catch rate and survival indicators showed the recent fishery harvests were sustainable. Since 1997, T4 management (Stout Whiting Fishery) is centred on annual assessments of total allowable commercial catch (TACC). The TACC is assessed before the start of each fishing year using statistical assessment methodologies, namely evaluation of trends in fish catch rates and catch-at-age frequencies measured against management reference points. The TACC has been under-caught in many years. For setting the 2017 T4 stout whiting TACC, the calculations covered a range of settings to account for the variance in the data and provide options for quota change. The overall (averaged) results suggested: • The procedure where the quota was adjusted based on previous TACC setting in year 2016 gave a recommended TACC for 2017 of between 1100 and 1130 t. • The procedure that focussed directly on optimising the average harvest to match target reference points gave a recommended TACC for 2017 of between 860 and 890 t. Use of these estimates to set TACC will depend on management and industry aims for the fishery.

Stout Whiting Fishery Summary : Queensland Total Allowable Catch for 2016

In Queensland, stout whiting are fished by Danish seine and fish otter-trawl methods between Sandy Cape and the Queensland-New South Wales border. The fishery is currently identified by a T4 symbol and is operated by two primary quota holders. Since 1997, T4 management has been informed by annual stock assessments in order to determine a total allowable commercial catch (TACC) quota. The TACC is assessed before the start of each fishing year using statistical methodologies. This includes evaluation of trends in fish catch-rates and catch-at-age frequencies against management reference points. The T4 stout whiting TACC for 2014 was adjusted down to 1150 t as a result of elevated estimates of fishing mortality and remained unchanged in 2015 (2013 TACC = 1350 t quota). Two T4 vessels fished for stout whiting in the 2015 fishing year, harvesting 663 t from Queensland waters. Annual T4 landings of stout whiting averaged about 713 t for the fishing years 2013–2015, with a maximum harvest in the last 10 fishing years of 1140 t and a maximum historical harvest of 2400 t in the 1995. Stout whiting catch rates from both Queensland and New South Wales were analysed for all vessels, areas and fishing gears. The 2015 catch rate index was equal to 0.85, down 15% compared to the 2010–2015 fishing year average (reference point =1). The stout whiting fish length and otolith weight frequencies indicated larger and older fish in the calendar year 2014. This data was translated to show improved measures of fish survival at about 38% per year and near the reference point of about 41%. Together, the stout whiting catch rate and survival indicators show the fishery was sustainable. Earlier population modelling conducted for the year 2013 also suggested the stock was sustainable, but the estimate was only marginally above the biomass for maximum sustainable yield. Irrespective, reasons for reduced catch rates should be examined further and interpreted with precaution, particularly given the TACC has been under-caught in many years. For setting of the 2016 TACC, alternate analyses and reference points were compared to address data uncertainties and provide options for quota change. The results were dependent on the stock indicator and harvest procedure used. Uncertainty in all TACC estimates should be considered as they were sensitive to the data inputs and assumptions. For the 2016 T4 fishing year, upper levels of harvest should be limited to 1000–1100 t following procedure equation 1, with target levels of harvest at 750–850 t for procedure equation 2. Use of these estimates to set TACC will depend on management and industry intentions.

Comparison of growth traits between abundant and uncommon forms of a non-native vine, Dolichandra unguis-cati (Bignoniaceae) in Australia

Cat’s claw creeper vine, Dolichandra unguis-cati (L.) Lohmann (syn. Macfadyena unguis-cati (L.) Gentry) (Bignoniaceae), is a major environmental weed in Australia. Two distinct forms of this weed (‘long’ and ‘short’ pod), with differences in leaf morphology and fruit size, occur in Australia. The long pod form has only been reported in less than fifteen localities in the whole of south-east Queensland, while the short pod form is widely distributed in Queensland and New South Wales. This study sought to compare growth traits such as specific leaf area, relative growth rate, stem length, shoot/root ratio, tuber biomass and branching architecture between these forms. These traits were monitored under glasshouse conditions over a period of 18 months. Short pod exhibited higher values of relative growth rates, stem length, number of tubers and specific leaf area than long pod, but only after 10 months of plant growth. Prior to this, long and short pod did not differ significantly. Higher values for these traits have been described as characteristics of successful colonizers. Results from this study could partly explain why the short pod form is more widely distributed in Australia while long pod is confined to a few localities.

Optimising plant bed performance through adaptive research with the Australian sweetpotato industry

A key driver of Australian sweetpotato productivity improvements and consumer demand has been industry adoption of disease-free planting material systems. On a farm isolated from main Australian sweetpotato areas, virus-free germplasm is annually multiplied, with subsequent 'pathogen-tested' (PT) sweetpotato roots shipped to commercial Australian sweetpotato growers. They in turn plant their PT roots into specially designated plant beds, commencing in late winter. From these beds, they cut sprouts as the basis for their commercial fields. Along with other intense agronomic practices, this system enables Australian producers to achieve worldRSQUOs highest commercial yields (per hectare) of premium sweetpotatoes. Their industry organisation, ASPG (Australian Sweetpotato Growers Inc.), has identified productivity of mother plant beds as a key driver of crop performance. Growers and scientists are currently collaborating to investigate issues such as catastrophic plant beds losses; optimisation of irrigation and nutrient addition; rapidity and uniformity of initial plant bed harvests; optimal plant bed harvest techniques; virus re-infection of plant beds; and practical longevity of plant beds. A survey of 50 sweetpotato growers in Queensland and New South Wales identified a substantial diversity in current plant bed systems, apparently influenced by growing district, scale of operation, time of planting, and machinery/labour availability. Growers identified key areas for plant bed research as: optimising the size and grading specifications of PT roots supplied for the plant beds; change in sprout density, vigour and performance through sequential cuttings of the plant bed; optimal height above ground level to cut sprouts to maximise commercial crop and plant bed performance; and use of structures and soil amendments in plant bed systems. Our ongoing multi-disciplinary research program integrates detailed agronomic experiments, grower adaptive learning sites, product quality and consumer research, to enhance industry capacity for inspired innovation and commercial, sustainable practice change.