Micropartículas de p(hbhv) e de blendas de p(hbhv):pcl contendo dexametasona ou acetato de dexametasona como modelos de fármacos : caracterização físico-química e perfis de liberação in vitro

Tendo em vista o controle da porosidade da matriz polimérica de micropartículas constituídas por blendas de poli(hidroxibutirato-co-hidroxivalerato) [P(HBHV)] e de poli- ε-caprolactona (PCL), o presente trabalho objetivou verificar a possibilidade de controle da liberação de fármacos associados a esses sistemas. Foram preparadas micropartículas constituídas de blendas de P(HBHV):PCL nas proporções de 100:0, 90:10 e 80:20 (m/m) pelo método de emulsificação/evaporação de solvente, variandose o volume de fase orgânica. Os modelos de fármacos utilizados foram a dexametasona e o acetato de dexametasona. As micropartículas obtidas apresentaram rendimento e eficiência de encapsulação satisfatória, entretanto, através de análises por microscopia óptica e microscopia eletrônica de varredura foi evidenciada a ocorrência de cristais de fármaco não encapsulado. Os diâmetros de partícula permaneceram em torno de 100 a 200 μm e variaram em função do volume de fase orgânica. A área superficial foi afetada pelo percentual de PCL na blenda e pela presença de cristais do fármaco nas formulações. A análise térmica das amostras demonstrou que o processo de obtenção alterou a estrutura cristalina do P(HBHV) e que a encapsulação dos fármacos levou à variação da sua temperatura de transição vítrea e cristalinidade. Os perfis de dissolução da dexametasona a partir das micropartículas apresentaram ajustes adequados ao modelo monoexponencial e foram semelhantes aos perfis apresentados pelo fármaco não encapsulado. Nas formulações contendo acetato de dexametasona houve liberação sustentada do fármaco por até 250 horas quando associado aos sistemas e a modelagem matemática indicou ajuste dos perfis ao modelo biexponencial. Evidenciou-se um aumento nos valores das constantes de liberação dos fármacos conforme o acréscimo do conteúdo de PCL na blenda.

Inovação pedagógica no Curso de Pedagogia da Universidade de Brasília (UnB): um estudo de abordagem etnográfica

O objetivo deste estudo é compreender a natureza da inovação pedagógica no processo de ensino e aprendizagem de alunos e professores do Curso de Pedagogia da Universidade de Brasília (UnB). Esta pesquisa justifica-se por oferecer uma contribuição original ao campo da inovação pedagógica através da investigação de uma experiência pioneira e inédita no período de 2006 e 2007. O trabalho de campo se deu sob a ótica da abordagem etnográfica orientada por Mattos (2009), Lüdke (2007), André (2004), Erickson (1992), Lapassade (1982) e Spradley (1979). Os instrumentos incluíram: observação participante, estudo de caso etnográfico (Turma de GEPE), entrevistas semi-estruturadas, documentos, dentre outros. As análises dos dados foram de natureza indutiva com o auxílio do quadro analítico de Spradley (1979) das hipóteses progressivas de Hammersley (1992) e do software Atlas.ti. As categorias derivadas das análises foram: conhecimento, currículo, tecnologia e inovação. No âmbito descritivo (GEERTZ, 1989), este estudo registra a experiência de alunos e professores do Curso de Pedagogia da Universidade de Brasília (UnB), autodenominado inovador, subsidiando a análise da inovação pedagógica na perspectiva dos sujeitos do processo de ensino e aprendizagem no ensino superior. Quanto aos resultados do estudo empírico, os dados coletados permitiram identificar: a polissemia de sentidos atribuídos ao termo inovação, a porosidade epistemológica do conhecimento no campo educacional, que sustenta a inovação através da construção dialético reflexiva do conhecimento pelos sujeitos do processo de ensino e aprendizagem; a argumentação de que a ação docente é a principal ―tecnologia cultural‖ e de que as linguagens midiáticas dependem da ação dos docentes para promover inovação; a necessidade de estudar a noção de currículo como viés de inovação pedagógica, investigada no contexto de propostas curriculares inovadoras; e, especialmente, a constatação de que inovação pedagógica como mudança paradigmática (FINO, 2001; 2003) pressupõe transformação ontológica da educação. Esses resultados subsidiam a proposição teórica da inovação pedagógica como ‗utopia realizável‘, isto é, como ―inédito-viável‖ (FREIRE, 1992) no contexto de uma ―Pedagogia da Possibilidade‖ (FREIRE, 2001; McLAREN 1998; SIMON, 1995). Finalmente, baseando-se nos resultados e nessa proposição teórica, a tese oferece recomendações para a prática, pesquisa e políticas públicas em educação.

Patologias na formulação de um betão na ilha da Madeira

Existem diversos métodos de formular a composição de um betão, dos quais, este estudo realça a metodologia aplicada às curvas de referência, nomeadamente a de Faury. No âmbito desta dissertação, o estudo do betão foi focado nas propriedades da resistência à compressão e trabalhabilidade, e nos factores que as influenciam para a obtenção dos resultados pretendidos. A dificuldade deste estudo surgiu na obtenção da trabalhabilidade desejada, derivada do tipo de agregados existentes na empresa e incertezas na quantificação da água de amassadura. Esta foi analisada, com especial destaque, para os parâmetros de absorção e humidade, em que o ensaio normativo da obtenção da capacidade de absorção dos agregados, poderá não ser o mais indicado para quantificar o valor real deste parâmetro. Notou-se que o método de Faury para determinar a água de amassadura, não era o mais indicado, por não ter em conta os parâmetros anteriormente referidos. Foram realizados diversos ensaios de obtenção de parâmetros necessários para efectuar uma formulação acertada. Foram também realizadas diversas amassaduras, com composições distintas, de forma a analisar a sua influência nos resultados. Estes foram analisados através de critérios de conformidade, para classificação do betão em termos de resistência. Foi possível concluir que os resultados da formulação da composição do betão, dependem muito da qualidade dos agregados utilizados, como a sua forma, porosidade e homogeneidade do material pétreo. De acordo com os resultados experimentais, foi concluída a existência de uma insuficiência de finos nas composições criadas para o betão, sugerindo uma curva real granulometria de referência para potencializar a trabalhabilidade para o tipo de agregados utilizados neste estudo.

Análise microestrutural de misturas cerâmicas de grês porcelanato com adição de chamote de telhas cerâmicas

MELO, Maxymme Mendes de ; PINHEIRO, Andrea Santos ; NASCIMENTO, R. M. ; MARTINELLI, Antonio Eduardo ; DUTRA, Ricardo Peixoto Suassuna ; MELO, Marcus Antônio de Freitas . Análise microestrutural de misturas cerâmicas de grês Porcelanato com adição de chamote de telhas cerâmicas. Cerâmica (São Paulo. Impresso), v. 55, p. 356-364, 2009

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Avaliação da potencialidade de uso do resíduo proveniente da indústria de beneficiamento do caulim na produção de piso cerâmico

FORMIGA, Felipe Lira et al. Avaliação da Potencialidade de Uso do Resíduo Proveniente da Indústria de Beneficiamento do Caulim na Produção de Piso Cerâmico. Cerâmica Industrial, v. 14, p. 41-45, 2009.

Ventilação e prescrições urbanísticas: uma aplicação simulada para a Orla da Praia do Meio em Natal/RN

This work analyses a study on natural ventilation and its relation to the urban legislation versus the building types in an urban fraction of coastal area of Praia do Meio in the city of Natal/RN, approaching the type or types of land use most appropriate to this limited urban fraction. The objective of this study is to analyse the effects of the present legislation as well as the types of buildings in this area on the natural ventilation. This urban fraction was selected because it is one of the sites from where the wind flows into the city of Natal. This research is based on the hypothesis stating that the reduction on the porosity of the urban soil (decrease in the set back/boundary clearance), and an increase in the form (height of the buildings) rise the level of the ventilation gradient, consequently causing a reduction on the wind speed at the lowest part of the buildings. Three-dimensional computational models were used to produce the modes of occupation allowed in the urban fraction within the area under study. A Computational Fluid Dynamics (CFD) software was also used to analyse the modes of land occupation. Following simulation, a statistical assessment was carried out for validation of the hypothesis. It was concluded that the reduction in the soil porosity as a consequence of the rates that defined the minimum boundary clearance between the building and the boundary of the plot (and consequently the set back), as well as the increase in the building form (height of the buildings) caused a reduction in the wind speed, thus creating heat islands

Ventilação e prescrições urbanísticas: uma aplicação simulada no bairro de Petrópolis em Natal/RN

The present work studies the natural ventilation and its relationship with the urban standards, which establishes the form of occupation and use of the land in our cities. The method simulates the application of the urban standards of the City Master Plan over the last three years. The simulation takes place in the District of Petrópolis, in the city of Natal , Brazil and analyses the effects of the standards of natural ventilation. The formulated hypothesis states that the reductions in the urban spaces between buildings rises up the vertical profile of ventilation, reducing, therefore, the velocity of the wind at the lower levels of the buildings. To develop the study, occupation models were built, using computerized, three-dimensional models. These occupation models were analyzed using the CFD (Computational Fluid Dynamics) code. The conclusion is that the more we reduce the urban space between buildings, the more we reduce the wind speed in constructed areas, increasing, therefore, the possibility to generate heat islands

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Estudo da permeação em membranas quitosana

This study proposes to do a study on the mathematical modeling of permeation of films based on chitosan. To conduct the study were obtained membranes with various compositions: a virtually pure membrane-based chitosan; one of chitosan associated with poly (ethylene oxide (PEO). The membranes of pure chitosan were treated with plasma in atmospheres of oxygen, argon and methane. The various types of films were characterized as to its permeation regarding sufamerazina sodium. In the process of mathematical modeling were compared the standard method of obtaining the coefficient of permeation recital straight down the slope of the plot obtained by extinction / time with a the integration process of numerical permeability rate will be calculated from the spectroscopy UV