Distribución, características y procesamiento de la pesquería de centolla Lithodes panamensis.

El área de trabajo comprendió de 7°S a 16°S, en profundidades de 768 a 1506 m y distancia de la costa entre 19 y 44 mn. Se pescaron cuatro especies de centolla: Paralomis longipes (más representativa), Lithodes wiracocha, L. panamensis y Lopholithodes diomedeae. Las tallas en P. longipes variaron entre 69 y 172 mm, en L. wiracocha entre 39 y 145 mm, L. panamensis presentó un rango de 90 a 138 mm. En todos los ejemplares muestreados las hembras presentaron menores tamaños que los machos. Los desembarques mostraron una tendencia ascendente de diciembre a mayo, con mayores valores en abril (28.989 kg) y mayo (28.865 kg). El esfuerzo varió entre 132 y 377 lances por mes, mostrando los máximos valores en enero y mayo.

Monitoreo y marcación de invertebrados marinos, Callao, Perú, 2014

En los alrededores de la isla San Lorenzo, en el 2014, bimensualmente se efectuaron muestreos en siete estaciones, monitoreando a los bivalvos Argopecten purpuratus, Glycymeris ovata y los crustáceos Romaleon polyodon, Cancer coronatus, Cancer porteri y Hepatus chilensis; también, se efectuaron experimentos de marcación y recaptura para determinar tasas de crecimiento en A. purpuratus, G. ovata, Semele spp., Gari solida y Protothaca thaca. A. purpuratus fue más abundante a finales del año, periodo en el que (como en el 2013) se registraron mayores valores de oxígeno a nivel de fondo del mar. R. polyodon presentó tendencia creciente de la talla media y biomasa. C. coronatus fue observado frecuentemente al norte de la isla San Lorenzo con densidades máximas de 10,67 ejemplares.10min. El cangrejo Platymera gaudichaudii fue observado solo en diciembre con densidades medias de 24 ejemplares.10 min de buceo. Se marcaron 7214 ejemplares y recapturaron 2730 ejemplares. G. ovata tuvo el 80% de recaptura y A. purpuratus 24%. Las tasas de crecimiento presentaron tendencias decrecientes a mayores tallas en todas las especies. En G. ovata la tasa de crecimiento fue mayor en ejemplares liberados en La Pampa diferente al comportamiento en Cabinzas; también se observaron diferencias entre las almejas Semele spp. y Gari solida. La abundancia de G. ovata en mayo y setiembre fue de hasta 190 ejemplares y 648,6 g por m². Las mayores densidades se registraron al noroeste de la isla San Lorenzo, mayor incidencia de esta especie estuvo en el substrato formado por conchuela molida. El rendimiento de G. ovata fue mayor en el área La Pampa respecto a Cabinzas, Palomino y Mal Nombre.

Biología reproductiva de Platyxanthus orbignyi "Cangrejo violaceo" procedente de la caleta de Huanchaco - La Libertad durante el 2015

El objetivo es determinar las características reproductivas de Platyxanthus orbignyi “cangrejo violáceo”. La población en estudio estuvo constituida por los ejemplares de Platyxanthus orbignyi “cangrejo violáceo” capturados mediante los caballitos de totora en Huanchaco del Departamento de L a Libertad durante el año 2015. La muestra estuvo constituida por 1477 ejemplares, encontrándose 912 (61.75%) hembras y 565 (38.25%) machos, la proporción sexual global favoreció a las hembras con un valor de 2:1; en la proporción sexual a la talla se observó el predominio de hembras en tallas grandes. La talla de primera madurez sexual en hembras fue de 37 mm y en machos 39 mm. La talla de media de madurez sexual en hembras fue de 61 mm y de machos fue de 59 mm. El estadío de madurez sexual V de los ejemplares hembras predominó en el mes de Marzo con un 32.91% y de machos en el mes de Octubre con un 20.22%. El índice gonadosomático presentó variaciones con tendencias diferentes para cada género. El diámetro de los huevos varió de 466 μm (estadio I) a 575 μm (estadio IV). El porcentaje promedio de atresia fue de 8.52%. La fertilidad promedio, para el estadio IV, fue 105 462 huevos.

Crecimiento de Platyxanthus orbignyi "Cangrejo violaceo" procedente de la caleta de Huanchaco - La Libertad durante el 2015

Esta investigación se realizó para determinar el crecimiento de Platyxanthus orbignyi “cangrejo violáceo” capturados en la caleta de Huanchaco, ubicado en el distrito de Huanchaco, Provincia de Trujillo, Departamento La Libertad, durante el 2015. El objetivo fue determinar el crecimiento de P. orbignyi, la muestra estuvo constituida por 1477 ejemplares procedentes de las capturas que realizan los pescadores artesanales empleando caballitos de totora y trampas denominadas nasas. Estos muestreos fueron mensuales durante el año 2015. La relación entre longitud cefalotorácica (mm) y ancho cefalotorácico (mm) presentó diferencia estadística entre las líneas de regresión de ambos sexos, la relación entre el ancho cefalotorácico (mm) y peso total (g) mostró alometría en el crecimiento de hembras y machos, estadísticamente no se encontró diferencia entre los sexos. Mediante el método de Bhattacharya (1967) modificado por Pauly y Caddy (1985) se establecieron siete estados de muda para las hembras y nueve estados de muda para los machos. Según el criterio de Kurata (1962) se estableció que el crecimiento en ambos sexos es de tipo geométrico retrogresivo. Los parámetros calculados se ajustaron a la ecuación de von Bertalanffy.

Transapical aortic valve replacement in extreme-risk patients: outcome, risk factors and mid-term results.

OBJECTIVES: Transcatheter aortic valve replacement (TAVR) provides good results in selected high-risk patients. However, it is unclear whether this procedure carries advantages in extreme-risk profile patients with logistic EuroSCORE above 35%. METHODS: From January 2009 to July 2011, of a total number of 92 transcatheter aortic valve procedures performed, 40 'extreme-risk' patients underwent transapical TAVR (TA-TAVR) (EuroSCORE above 35%). Variables were analysed as risk factors for hospital and mid-term mortality, and a 2-year follow-up (FU) was obtained. RESULTS: The mean age was: 81 ± 10 years. Twelve patients (30%) had chronic pulmonary disease, 32 (80%) severe peripheral vascular disease, 14 (35%) previous cardiac surgery, 19 (48%) chronic renal failure (2 in dialysis), 7 (17%) previous stroke (1 with disabilities), 3 (7%) a porcelain aorta and 12 (30%) were urgent cases. Mean left ventricle ejection fraction (LVEF) was 49 ± 13%, and mean logistic EuroSCORE was 48 ± 11%. Forty stent-valves were successfully implanted with six Grade-1 and one Grade-2 paravalvular leakages (success rate: 100%). Hospital mortality was 20% (8 patients). Causes of death following the valve academic research consortium (VARC) definitions were: life-threatening haemorrhage (1), myocardial infarction (1), sudden death (1), multiorgan failure (2), stroke (1) and severe respiratory dysfunction (2). Major complications (VARC definitions) were: myocardial infarction for left coronary ostium occlusion (1), life-threatening bleeding (2), stroke (2) and acute kidney injury with dialysis (2). Predictors for hospital mortality were: conversion to sternotomy, life-threatening haemorrhage, postoperative dialysis and long intensive care unit (ICU) stay. Variables associated with hospital mortality were: conversion to sternotomy (P = 0.03), life-threatening bleeding (P = 0.02), acute kidney injury with dialysis (P = 0.03) and prolonged ICU stay (P = 0.02). Mean FU time was 24 months: actuarial survival estimates for all-cause mortality at 6 months, 1 year, 18 months and 2 years were 68, 57, 54 and 54%, respectively. Patients still alive at FU were in good clinical condition, New York Heart Association (NYHA) class 1-2 and were never rehospitalized for cardiac decompensation. CONCLUSIONS: TA-TAVR in extreme-risk patients carries a moderate risk of hospital mortality. Severe comorbidities and presence of residual paravalvular leakages affect the mid-term survival, whereas surviving patients have an acceptable quality of life without rehospitalizations for cardiac decompensation.

Contribution à l'écologie et la zoogéographie de Micropotamogale lamottei (Mammalia, Tenrecidae)

Eighty eight specimens of the West African Pigmy Otter shrew Micropotamogale lamottei were collected in Western Ivory Coast between 1971 and 1976. Most of the animals had been drowned accidentally bow-nets; four were live-trapped by the author. The Pigmy Otter shrew lives not only in swampy areas, as supposed by other authors, but also in small rivers and forest streams. The species is well adapted to its aquatic environment; it feeds mainly on fresh water crab and fish, swims well, is able to remain submerged for 10 to 15 minutes when alarmed, and grooms itself carefully and regularly. A survey carried out locally shows that the species is relatively common in the mountainous region surrounding Danané and Man, and further west in similar habitats of Liberia and Guinea. Its distribution in the Ivory Coast extends no more than 50 km around Danané-Man core-area. It is thought that living Potamogalinae stem from an early adaptative radiation of the Tenrecidae in continental Africa. Later on, the terrestrial forms were probably eliminated by competing Soricidae and Erinaceidae, their aquatic way of life enabling the Potamogalinae to survive until now.

Quantitative X-Ray Diffraction Measurements by Fast Scanning, HR-111

Two goals were pursued in this research: first, to evaluate statistically some effects of sample preparation and instrument geometry on reproducibility of X-ray diffraction intensity data; and second, to develop a procedure for finding minimum peak and background counting times for a desired level of accuracy. The ratio of calcite to dolomite in limestones was determined in trials. Ultra-fine wet grinding of the limestone in porcelain impact type ball mill gave most consistent X-ray results, but caused considerable line broadening, and peaks were best measured on an area count basis. Sample spinning reduced variance about one third, and a coarse beam-medium detector slit arrangement was found to be best. An equation is developed relating coefficient of variation of a count ratio to peak and background counts. By use of the equation or graphs the minimum coefficient of variation is predicted from one fast scan, and the number and optimum arrangement of additional counting periods to reduce variation to a desired limit may be obtained. The calculated coefficient is the maximum which may be attributed to the counting statistic but does not include experimental deviations.

Social structure emerges via the interaction between local ecology and individual behaviour.

1. The formation of groups is a fundamental aspect of social organization, but there are still many questions regarding how social structure emerges from individuals making non-random associations. 2. Although food distribution and individual phenotypic traits are known to separately influence social organization, this is the first study, to our knowledge, experimentally linking them to demonstrate the importance of their interaction in the emergence of social structure. 3. Using an experimental design in which food distribution was either clumped or dispersed, in combination with individuals that varied in exploratory behaviour, our results show that social structure can be induced in the otherwise non-social European shore crab (Carcinus maenas). 4. Regardless of food distribution, individuals with relatively high exploratory behaviour played an important role in connecting otherwise poorly connected individuals. In comparison, low exploratory individuals aggregated into cohesive, stable subgroups (moving together even when not foraging), but only in tanks where resources were clumped. No such non-foraging subgroups formed in environments where food was evenly dispersed. 5. Body size did not accurately explain an individual's role within the network for either type of food distribution. 6. Because of their synchronized movements and potential to gain social information, groups of low exploratory crabs were more effective than singletons at finding food. 7. Because social structure affects selection, and social structure is shown to be sensitive to the interaction between ecological and behavioural differences among individuals, local selective pressures are likely to reflect this interaction.

Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review

Purpose: The aim of this review was to systematically evaluate and compare the frequency of veneer chipping and core fracture of zirconia fixed dental prostheses (FOPS) and porcelain-fused-to-metal (PFM) FDPs and determine possible influencing factors. Materials and Methods: The SCOPUS database and International Association of Dental Research abstracts were searched for clinical studies involving zirconia and PFM FDPs. Furthermore, studies that were integrated into systematic reviews on PFM FDPs were also evaluated. The principle investigators of any clinical studies on zirconia FDPs were contacted to provide additional information. Based on the available information for each FOP, a data file was constructed. Veneer chipping was divided into three grades (grade 1 = polishing, grade 2 = repair, grade 3 = replacement). To assess the frequency of veneer chipping and possible influencing factors, a piecewise exponential model was used to adjust for a study effect. Results: None of the studies on PFM FDPs (reviews and additional searching) sufficiently satisfied the criteria of this review to be included. Thirteen clinical studies on zirconia FDPs and two studies that investigated both zirconia and PFM FDPs were identified. These studies involved 664 zirconia and 134 PFM FDPs at baseline. Follow-up data were available for 595 zirconia and 127 PFM FDPs. The mean observation period was approximately 3 years for both groups. The frequency of core fracture was less than 1% in the zirconia group and 0% in the PFM group. When all studies were included, 142 veneer chippings were recorded for zirconia FDPs (24%) and 43 for PFM FDPs (34%). However, the studies differed extensively with regard to veneer chipping of zirconia: 85% of all chippings occurred in 4 studies, and 43% of all chippings included zirconia FDPs. If only studies that evaluated both types of core materials were included, the frequency of chipping was 54% for the zirconia-supported FDPs and 34% for PFM FDPs. When adjusting the survival rate for the study effect, the difference between zirconia and PFM FDPs was statistically significant for all grades of chippings (P = .001), as well as for chipping grade 3 (P = .02). If all grades of veneer chippings were taken into account, the survival of PFM FDPs was 97%, while the survival rate of the zirconia FDPs was 90% after 3 years for a typical study. For both PFM and zirconia FDPs, the frequency of grades 1 and 2 veneer chippings was considerably higher than grade 3. Veneer chipping was significantly less frequent in pressed materials than in hand-layered materials, both for zirconia and PFM FDPs (P = .04). Conclusions: Since the frequency of veneer chipping was significantly higher in the zirconia FDPs than PFM FDPs, and as refined processing procedures have started to yield better results in the laboratory, new clinical studies with these new procedures must confirm whether the frequency of veneer chipping can be reduced to the level of PFM. Int J Prosthodont 2010;23:493-502

Novel use of a whole cell E. coli bioreporter as a urinary exposure biomarker.

Bacterial bioreporters have substantial potential for contaminant assessment but their real world application is currently impaired by a lack of sensitivity. Here, we exploit the bioconcentration of chemicals in the urine of animals to facilitate pollutant detection. The shore crab Carcinus maenas was exposed to the organic contaminant 2-hydroxybiphenyl, and urine was screened using an Escherichia coli-based luciferase gene (luxAB) reporter assay specific to this compound. Bioassay measurements differentiated between the original contaminant and its metabolites, quantifying bioconcentration factors of up to one hundred-fold in crab urine. Our results reveal the substantial potential of using bacterial bioreporter assays in real-time monitoring of biological matricesto determine exposure histories, with wide ranging potential for the in situ measurement of xenobiotics in risk assessments and epidemiology.

MAGIC TeV Gamma-Ray Observations of Markarian 421 during Multiwavelength Campaigns in 2006

Wide-range spectral coverage of blazar-type active galactic nuclei is of paramount importance for understanding the particle acceleration mechanisms assumed to take place in their jets. The Major Atmospheric Gamma Imaging Cerenkov (MAGIC) telescope participated in three multiwavelength (MWL) campaigns, observing the blazar Markarian (Mkn) 421 during the nights of April 28 and 29, 2006, and June 14, 2006. Aims. We analyzed the corresponding MAGIC very-high energy observations during 9 nights from April 22 to 30, 2006 and on June 14, 2006. We inferred light curves with sub-day resolution and night-by-night energy spectra. Methods. MAGIC detects γ-rays by observing extended air showers in the atmosphere. The obtained air-shower images were analyzed using the standard MAGIC analysis chain. Results. A strong γ-ray signal was detected from Mkn 421 on all observation nights. The flux (E > 250 GeV) varied on night-by-night basis between (0.92±0.11) × 10-10 cm-2 s-1 (0.57 Crab units) and (3.21±0.15) × 10-10 cm-2 s-1 (2.0 Crab units) in April 2006. There is a clear indication for intra-night variability with a doubling time of 36± min on the night of April 29, 2006, establishing once more rapid flux variability for this object. For all individual nights γ-ray spectra could be inferred, with power-law indices ranging from 1.66 to 2.47. We did not find statistically significant correlations between the spectral index and the flux state for individual nights. During the June 2006 campaign, a flux substantially lower than the one measured by the Whipple 10-m telescope four days later was found. Using a log-parabolic power law fit we deduced for some data sets the location of the spectral peak in the very-high energy regime. Our results confirm the indications of rising peak energy with increasing flux, as expected in leptonic acceleration models.

Improving the performance of the single-dish Cherenkov telescope MAGIC through the use of signal timing

The Cherenkov light flashes produced by Extensive Air Showers are very short in time. A high bandwidth and fast digitizing readout, therefore, can minimize the influence of the background from the light of the night sky, and improve the performance in Cherenkov telescopes. The time structure of the Cherenkov image can further be used in single-dish Cherenkov telescopes as an additional parameter to reduce the background from unwanted hadronic showers. A description of an analysis method which makes use of the time information and the subsequent improvement on the performance of the MAGIC telescope (especially after the upgrade with an ultra fast 2 GSamples/s digitization system in February 2007) will be presented. The use of timing information in the analysis of the new MAGIC data reduces the background by a factor two, which in turn results in an enhancement of about a factor 1.4 of the flux sensitivity to point-like sources, as tested on observations of the Crab Nebula.

Avaliação de filtros domésticos comerciais para purificação de águas e retenção de contaminantes inorgânicos

Twenty domestic commercial filters, in order to determine the percentual retention of color, turbidity, dry residue, bicarbonates, carbonates, total hardness, nitrogens, iron, chlorides, fluorides, and residual chlorine (parameters of food legislation) and sulphides in thirteen water samples proceeding from springs, wells, rivers, lakes, drinking patterns and standards, before and after purification were evaluated. The results showed that purifiers presented adequate retention for nitrates (74.8 ± 16.2 %) and residual chlorine (74.0 ± 11.2) and medium retention for sulphides (61.7 ± 11.3); while porcelain plus activated carbon filters presented adequate retention for color (90.0 ± 19.7), turbidity (76.4 ± 18.4) and iron (83.5 ± 15.1). Therefore the retention of carbonates, bicarbonates, total hardness, chlorides, dry residue, fluorides, ammonium nitrogens and nitrites was less than 10%, and the values of pH didn't show significant variation, for all the filters studied.

Influência do material do destilador na composição química das aguardentes de cana: parte II

The quantitative chemical analysis of the Brazilian sugar cane spirit distilled from glass column packaged with copper, stainless steel, aluminum sponge, or porcelain balls is described. The main chemical compounds determined by gas chromatography coupled with flame ionization (FID) and flame photometric (FPD) detectors and liquid chromatography coupled with diode array detector are aldehydes, ketones, carboxylic acids, alcohols, esters and dimethylsulfite (DMS). The spirits produced either in columns filled with copper or aluminum pot still exhibits the lowest DMS contents but the higher sulfate and methanol contents, whereas spirits produced in stainless steel or porcelain showed higher DMS concentration and lower teors of sulfate ion and methanol. These observations are coherent with DMS oxidation to sulfate, with methanol as by product, in the presence of either copper or aluminum.

The Influence of Certain Processing Factors on the Durability of Yttrium Stabilized Zirconia Used As Dental Biomaterial

In dentistry, yttrium partially stabilized zirconia (ZrO2) has become one of the most attractive ceramic materials for prosthetic applications. The aim of this series of studies was to evaluate whether certain treatments used in the manufacturing process, such as sintering time, color shading or heat treatment of zirconia affect the material properties. Another aim was to evaluate the load-bearing capacity and marginal fit of manually copy-milled custom-made versus prefabricated commercially available zirconia implant abutments. Mechanical properties such as flexural strength and surface microhardness were determined for green-stage milled and sintered yttrium partially stabilized zirconia after different sintering time, coloring process and heat treatments. Scanning electron microscope (SEM) was used for analyzing the possible changes in surface structure of zirconia material after reduced sintering time, coloring and heat treatments. Possible phase change from the tetragonal to the monoclinic phase was evaluated by X-ray diffraction analysis (XRD). The load-bearing capacity of different implant abutments was measured and the fit between abutment and implant replica was examined with SEM. The results of these studies showed that the shorter sintering time or the thermocycling did not affect the strength or surface microhardness of zirconia. Coloring of zirconia decreased strength compared to un-colored control zirconia, and some of the colored zirconia specimens also showed a decrease in surface microhardness. Coloring also affected the dimensions of zirconia. Significantly decreased shrinkage was found for colored zirconia specimens during sintering. Heat treatment of zirconia did not seem to affect materials’ mechanical properties but when a thin coating of wash and glaze porcelain was fired on the tensile side of the disc the flexural strength decreased significantly. Furthermore, it was found that thermocycling increased the monoclinic phase on the surface of the zirconia. Color shading or heat treatment did not seem to affect phase transformation but small monoclinic peaks were detected on the surface of the heat treated specimens with a thin coating of wash and glaze porcelain on the opposite side. Custom-made zirconia abutments showed comparable load-bearing capacity to the prefabricated commercially available zirconia abutments. However, the fit of the custom-made abutments was less satisfactory than that of the commercially available abutments. These studies suggest that zirconia is a durable material and other treatments than color shading used in the manufacturing process of zirconia bulk material does not affect the material’s strength. The decrease in strength and dimensional changes after color shading needs to be taken into account when fabricating zirconia substructures for fixed dental prostheses. Manually copy-milled custom-made abutments have acceptable load-bearing capacity but the marginal accuracy has to be evaluated carefully.