New mechanical samples positioning system for irradiations on a radial channel at nuclear research reactor in a full-power continuous operation

This paper describes a new mechanical samples positioning system that allows the safe placement and removal of biological samples for prolonged irradiation, in a nuclear reactor during full-power continuous operation. Also presented herein the materials of construction and operating principles. Additionally, this sample positioning system is compared with an existing pneumatic and automated transfer system, already available at the research reactors. The system consists of a mechanical arm with a claw, which can deliver the samples for irradiations without reactor shutdown. It was installed in the lEA-R1 research reactor at Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, Brazil, and for the past 5 years, the system has successfully operated and allowed the conducting of important experiments. As a result of its introduction, the facility has been in a position to positively respond to the increased demand in studies of biology, medicine, physics, engineering, detector/dosimeter calibrations, etc. It is one example of the appropriated technologies that save energy and resources. (C) 2010 Elsevier Ltd. All rights reserved.

Acupuncture for labour pain

Background: Acupuncture involves puncturing the skin with thin sterile needles at defined acupuncture points. Previous studies are inconclusive regarding the effect of acupuncture on labour pain, but some studies have found a reduction in the use of pharmacological pain relief when acupuncture is administered. The appropriate dose of acupuncture treatment required to elicit a potential effect on labour pain has not been fully explored. The dose is determined by many different factors, including the number of needles used and the intensity of the stimulation. In Sweden, manual stimulation of the needles is common practice when acupuncture is used for labour pain, but electrical stimulation of the needles, which gives a higher dose, could possibly be more effective. The overall aim of this thesis was to evaluate the effectiveness of acupuncture with manual stimulation (MA) of the needles as well as acupuncture with a combination of manual and electrical stimulation (EA) in reducing labour pain, compared with standard care without any form of acupuncture (SC). Methods: The study was designed as a three-armed randomised controlled trial in which 303 nulliparous women with normal pregnancies were randomised to MA, EA, or SC. The primary outcome was labour pain, assessed using the Visual Analogue Scale (VAS). Secondary outcomes were relaxation during labour, use of obstetric pain relief, and associations between maternal characteristics and labour pain and use of epidural analgesia respectively. Also, labour and infant outcomes, recollection of labour pain, and maternal experiences, such as birth experience and experience of the midwife, were investigated two months after the birth. The sample size calculation was based on the potential to discover a difference of 15 mm on the VAS. Data were collected during labour before the interventions, the day after birth, and two months later. Besides using the VAS, information was collected by means of study specific protocol, questionnaires and medical records. Results: The mean VAS scores were 66.4 in the MA group, 68.5 in the EA group, and 69.0 in the SC group (mean differences: MA vs. SC 2.6 95% CI -1.7 to 6.9, and EA vs. SC 0.6 95% CI -3.6 to 4.8). Other methods of pain relief were used less frequently in the EA group, including epidural analgesia, MA 61.4%, EA 46%, and SC 69.9%. (EA vs. SC OR 0.4 95% CI 0.2 to 0.7). No statistically significant differences were found in the recollection of labour pain between the three groups two months after birth (mean VAS score: MA 69.3, EA 68.7 and SC 70.1). A few maternal characteristics were associated with labour pain (age, dysmenorrhea, and cervix dilatation), but none of the investigated characteristics predicted the outcome of the acupuncture treatment in MA or EA. Women in the EA group experienced acupuncture as being effective for labour pain to a higher extent than women who received MA, MA 44.4%, EA 67.1% (EA vs. MA OR 2.4 95% CI 1.2 to 4.8). Women in the EA group also spent less time in labour (mean 500 min) than those who received MA (mean 619 min) and SC (mean 615 min) (EA vs. MA HR 1.4 95% CI 1.0 to1.9, EA vs. SC HR 1.4, 95% CI 1.1 to 2.0), and had less blood loss than women receiving SC, (EA vs. SC OR 0.1 95% CI 0.3 to 0.7). The women’s assessment of the midwife as being supportive during labour (MA 77.2%, EA 83.5%, SC 80%), overall satisfaction with midwife care (MA 100%, EA 97.5%, SC 98.7%), and having an overall positive childbirth experience (MA 64.6%, EA 61.0%, SC 54.3%) did not differ statistically. No serious side effects of the acupuncture treatment were reported. Conclusion: Acupuncture, regardless of type of stimulation, did not differ from standard care without acupuncture in terms of reducing women’s experience of pain during labour, or their memory of pain and childbirth overall two months after the birth. However, other forms of obstetric pain relief were less frequent in women receiving a combination of manual and electrical stimulation, suggesting that this method could facilitate coping with labour pain.

Análise dos requisitos e planos de produção gerados por um sistema de planejamento fino de produção

O tema central deste trabalho é o Planejamento, Programação e Controle da Produção na indústria, com o auxílio de uma ferramenta computacional, do tipo Finite Capacity Schedule (FCS). No Brasil, essa categoria de software é denominada, genericamente, por Sistemas de Planejamento Fino de Produção ou de Capacidade Finita. Alinhado com as tendências mundiais e a vantagem de menores investimentos em hardware, o sistema escolhido é compatível com a operação em microcomputadores. Na primeira parte do trabalho, o assunto é tratado de forma geral, quando se pretende caraterizar amplamente o problema da programação da produção, as dificuldades na sua execução, as soluções existentes e suas limitações. A segunda parte do trabalho discute, detalhadamente, os métodos tradicionais de planejamento de materiais e capacidade. A revisão bibliográfica se encerra com uma apresentação dos sistemas FCS e sua classificação. A terceira parte trata da descrição, ensaios e avaliação da programação gerada por um software de Planejamento Fino de Produção determinístico, baseado na lógica de simulação computacional com regras de decisão. Embora a avaliação esteja limitada ao software utilizado, a análise ainda vai procurar identificar as diferenças fundamentais entre os resultados da programação de Capacidade Finita e a convencional, representada pelos sistemas da categoria MRPII ou Planejamento dos Recursos de Manufatura (Manufacturing Resources Planning). As lógicas dos sistemas MRPII e de Capacidade Finita são discutidas na revisão bibliográfica, enquanto que, para o software empregado no trabalho, ainda há um capítulo específico tratando da sua descrição, fundamentos, software house, hardware necessário e outras informações relevantes. Os ensaios serão implementados com o objetivo de analisar o sistema FCS como ferramenta de planejamento e de programação de produção. No caso, uma fração de um processo produtivo será modelada no sistema, através do qual serão gerados planos de produção que serão confrontados com a programação usual e com o comportamento real dos recursos envolvidos. Os ensaios serão realizados numa das unidades pertencentes a uma empresa transnacional de grande porte, que atua no ramo de pneumáticos. Por último, são apresentadas as conclusões gerais, recomendações na aplicação do sistema estudado e sugestões para futuras pesquisas relacionadas com o assunto.

Quantificação de Shunt intrapulmonar por cintilografia e gasometria arterial com 02 a 100% em candidatos a transplante hepático com diferentes graus de dilatação vascular intrapulmonar

As dilatações vasculares intrapulmonares (DVIP) constituem a anormalidade vascular pulmonar mais freqüente e a principal causa de hipoxemia grave em hepatopatas. A associação de doença hepática, aumento do gradiente alvéoloarterial de oxigênio e DVIP é chamada de "síndrome hepatopulmonar". O objetivo principal deste estudo foi verificar se os níveis de DVIP aferidos por ecocardiografia com contraste estão relacionados à intensidade de shunt intrapulmonar, medida por dois diferentes métodos: cintilografia com 99mTc-MAA e gasometria com O2 a 100%. Foram estudados 28 candidatos a transplante hepático portadores com DVIP identificadas e graduadas por ecocardiografia conforme escala semi-quantitativa (graus I a IV). A idade média foi de 47,5 anos, e a doença hepática foi classificada como Child-Pugh B na maioria dos casos (60,7%). A intensidade das DVIP foi classificada como I, II, III e IV em 13 (46,4%), 9 (32,1%), 2 (7,1%) e 4 (14,3%) casos, respectivamente. Dos 28 pacientes, 21 (75%) tiveram quantificação de shunt pelo método cintigráfico e gasométrico, 6 (21,4%) apenas pelo método cintigráfico e 1 caso (3,6%) pelo método gasométrico apenas. A PaO2 média entre os pacientes com DVIP graus I e II por ecocardiografia foi 89,1 ± 11,0mmHg, enquanto naqueles com DVIP classificadas como graus III e IV foi 74,7 ± 13,2mmHg (p = 0,01). A média dos valores de shunt por cintilografia nos 27 pacientes submetidos ao exame foi 14,9 ± 9,0% do débito cardíaco (mínimo 6,9% e máximo 39%), sendo 11,7 ± 3,8% nos pacientes com DVIP graus I e II, e 26,3 ± 9,7% nos pacientes com DVIP graus III e IV (p = 0,01). A média dos valores de shunt pelo teste com O2a 100% foi 9,8 ± 3,9%, sendo 8,3 ± 2,3% nos pacientes com DVIP graus I e II, e 16,3 ± 2,6% nos pacientes com DVIP graus III e IV (p < 0,001). Observou-se uma relação estatisticamente significativa entre a graduação de DVIP por ecocardiografia e o valor de shunt aferido por gasometria com O2 a 100% (rs = 0,609, p < 0,01) e por cintilografia (rs = 0,567, p < 0,001). Observou-se relação estatisticamente significativa entre os valores de shunt medidos por cintilografia e aqueles medidos por gasometria com O2 a 100% nos 21 pacientes que se submeteram à quantificação de shunt pelos 2 métodos (rs = 0,666, p < 0,001). A avaliação semi-quantitativa do grau de DVIP por ecocardiografia apresentou correlação moderada a boa com os valores de shunt aferidos pelos dois outros métodos estudados, sendo que a melhor correlação foi observada com o teste com O2 a 100%.

Efeito agudo da ingestão de álcool sobre a função endotelial em homens jovens

A disfunção endotelial, avaliada através da vasodilatação mediada pelo fluxo (FMD) e não mediada pelo fluxo (NFMD), está associada à ocorrência de eventos cardiovasculares. Enquanto o consumo moderado de bebidas alcoólicas está associado com baixo risco para doenças cardiovasculares, a ingestão de doses mais altas predispõe a arritmias cardíacas, acidente vascular encefálico e outros eventos, que têm maior incidência no período da manhã. A investigação dos efeitos do álcool sobre a função endotelial pode trazer um melhor entendimento para esta associação. O presente estudo tem por objetivo avaliar, em uma amostra homogênea, o efeito de uma dose relativamente elevada de álcool sobre parâmetros vasculares e de função endotelial. O diâmetro da artéria braquial (DAB), a FMD e a NFMD foram mensurados em três horários (17h, 22h e 7h), em 100 indivíduos do sexo masculino, hígidos, com idades entre 18 e 25 anos (média de 20,74 anos), por ecodoppler da artéria braquial (segundo o protocolo da International Brachial Artery Reactivity Task Force). Os indivíduos foram randomizados para ingerir uma bebida contendo álcool ou uma bebida similar não alcoólica, às 18h. O grupo que consumiu álcool apresentou um aumento no DAB entre as 17h (4,03 mm) e 22h (4,41 mm). Ocorreu uma redução da FMD para 2,43% e da NFMD para 6,30% às 22h, quando comparados com os valores anteriores à ingestão (FMD = 4,22% e NFMD = 13,7%). Foi constatado um efeito bifásico para a pressão arterial sistólica (PAS) e diastólica (PAD), com redução às 22h (PAS = 105,18 mmHg; PAD = 60,14 mmHg), seguida de elevação às 7h (PAS = 117,50 mmHg; PAD = 70,98 mmHg). Conclui-se que, após um período inicial de vasodilatação, a ingestão aguda de álcool não afeta a função endotelial, comparado ao placebo.

Microscopic features of tick-bite lesions in anteaters and armadillos - Emas National Park and the Pantanal region of Brazil

The naturally occurring wildlife host associations between ticks and tick-borne pathogens found in the neotropics are poorly described. Understanding tick-bite lesions is important as these are the site of host reaction to and pathogen delivery by ticks. As part of a comprehensive study concerning established and emerging tick-host relationships. The present work describes some aspects of tick-bite lesions in anteaters and armadillos captured at the Emas National Park and the Pantanal region of Brazil. Biopsies were of skin were taken and examine. Tick feeding sites of all animals displayed an eosinophilic homogeneous mass, the cement cone, and, occasionally, a feeding cavity underneath the tick attachment site. At these locations the epidermis was usually thickened due to keratinocyte hyperplasia. The main dermal changes included tissue infiltration with a varying number of inflammatory cells, edema, hemorrhage. and vascular dilatation. Cellular infiltration of the dermis was predominantly composed of mononuclear cells, neutrophils. and eosinophils. Mast cells were also seen in both non-parasitized and parasitized skin but were found in higher numbers at perivascular sites and in parasitized skin. Basophils were not seen at tick attachment sites of anteaters or armadillos.

The adrenergic regulation of the cardiovascular system in the South American rattlesnake, Crotalus durissus

The present study investigates adrenergic regulation of the systemic and pulmonary circulations of the anaesthetised South American rattlesnake, Crotalus durissus. Haemodynamic measurements were made following bolus injections of adrenaline and adrenergic antagonists administered through a systemic arterial catheter. Adrenaline caused a marked systemic vasoconstriction that was abolished by phentolamine, indicating this response was mediated through alpha-adrenergic receptors. Injection of phentolamine gave rise to a pronounced vasodilatation (systemic conductance (G(sys)) more than doubled), while injection of propranolol caused a systemic vasoconstriction, pointing to a potent alpha-adrenergic, and a weaker beta-adrenergic tone in the systemic vasculature of Crotalus. Overall, the pulmonary vasculature was far less responsive to adrenergic stimulation than the systemic circulation. Adrenaline caused a small but non-significant pulmonary vasodilatation and there was tendency of reducing this dilatation after either phentolamine or propranolol. Injection of phentolamine increased pulmonary conductance (G(pul)), while injection of propranolol produced a small pulmonary constriction, indicating that alpha-adrenergic and beta-adrenergic receptors contribute to a basal regulation of the pulmonary vasculature. Our results suggest adrenergic regulation of the systemic vasculature, rather than the pultrionary, may be an important factor in the development of intracardiac shunts. (c) 2007 Elsevier B.V. All rights reserved.

Um sistema para estimação da vazão de gás de poços produzindo por Plunger Lift para vaso separador de teste em plataformas de petróleo

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

UMEB - Unidade Móvel para Ensaio da Barra de Tração

Um equipamento denominado Unidade Móvel de Ensaio da Barra de Tração - UMEB, foi desenvolvido na FCA/UNESP de Botucatu para realizar ensaios de tratores em solo agrícola. Construída a partir de um reboque (trailer), a UMEB foi adaptada para servir como carro dinamométrico instrumentado, utilizado na avaliação do desempenho de tratores submetidos a ensaios na barra de tração. Sua massa total é de 10.500 kg sustentados por um conjunto de seis rodados pneumáticos. Ensaios de campo mostraram que a UMEB proporcionou força de tração acima de 35 kN, mantendo-a constante, em diferentes condições de superfície do solo, mesmo quando a velocidade de deslocamento foi modificada.

Avaliação do contato pneu-solo em três modelos de pneus agrícolas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of tractive performance of four agricultural tractors in laterally inclined terrain

O presente trabalho teve como objetivo avaliar o desempenho operacional de quatro tratores agrícolas com tração dianteira auxiliar, em função de seis inclinações laterais, em uma pista lateral de ensaios, pertencente à Faculdade de Ciências Agronômicas da Universidade Estadual Paulista, Câmpus de Botucatu. As inclinações laterais foram 0; 5; 10; 15; 20 e 25 graus. em todas estas situações, os tratores operaram com carga predeterminada de tração imposta ao trator tracionado de 40 kN na inclinação de 0 grau. Portanto, foi utilizado um delineamento em blocos casualizados (DBC), sendo seis inclinações e quatro tratores, e com três repetições para cada tratamento. As variáveis analisadas foram patinhagem, força de tração, consumo horário de combustível e velocidade de deslocamento. Concluiu-se que a configuração dos rodados pneumáticos influenciaram no desempenho operacional dos tratores, conforme aumentaram as inclinações laterais do terreno.

Níveis de adubação para a cultura do milho Safrinha

The objective of this research was to evaluate the effect two hybrids of maize, cultivated on "safrinha" conditions, in different rates of 08-28-16 formula. The treatments consisted of two hybrids of maize (DKB747 e CO32) cultivated in no-tillage system (SPD) and five rates of fertilizer 08-28-16 (100, 200, 300, 400 e 500 kg ha(-1)). The randomized block design was used, with subdivided splots and four replications. The maize was sowed on 02/03/2006 using seeder pneumatic of mechanics traction, with four individual lines, spaced of 0.45 m During maize flowering period, morphologic components were evaluated; the harvest occurred on 150 days after the sowing, when the production components were evaluated. The hybrid of maize DKB747 showed greater efficiency, while the hybrid of maize CO32 was more responsive to rates used. NPK rates on 08-28-16 fomula above 300 kg ha(-1) are not necessary to the hybrid CO32 cultivated on "safrinha" conditions, in Botucatu region, state of São Paulo.

Influência da velocidade de deslocamento na semeadura do milho

Teve-se o objetivo de verificar a influência da velocidade de deslocamento na semeadura de milho, variando de 3,0 a 9,0 km h-1, em quatro condições. As variáveis analisadas foram: população de plantas emergidas, distribuição longitudinal, população com espigas e os componentes de rendimento. Concluiu-se que há aumento na percentagem de espaçamentos falhos e múltiplos e queda de espaçamentos aceitáveis ao se elevar a velocidade de semeadura. A produtividade só foi afetada quando a população de plantas com espigas foi reduzida pelo incremento de velocidade.

Montagem e operação de um secador pneumático tipo flash

In this work, a pneumatic dryer has been designed and assembled in laboratory scale in order to study and evaluate configurations more efficient for application in drying of important materials of Northeast region in Brazil. The equipment was tested with drying of corn and rice grains, in conditions of temperature and air velocity at 80 oC and 35 m/s, respectively. For this type of dryer, it is recommended to work at temperatures above 200 °C and air velocity with higher dynamic pressure. However, even under operating conditions below what it is recommended, the results obtained with the pneumatic dryer were satisfactory. In addition, experiments of drying were performed by using a cabinet dryer (batch dryer) under the same conditions used in the pneumatic dryer. Flash one curves for the corn were fitted satisfactorily by applying of the Lewis model, while a better agreement was found for rice by using the Page model. The data obtained with both drying processes allowed to compare the performance between pneumatic and batch dryers. In respect to drying rate, the pneumatic dryer presented a similar performance to the batch dryer during processing with corn and a superior performance to the last one during processing with rice. Therefore, it was possible to verify that the pneumatic dryer assembled in this preliminar study can be applied for different materials and under different operating conditions

Comportamento de mergulho do boto-cinza, Sotalia guianensis, na enseada do Curral, Praia de Pipa-RN, Brasil :possíveis adaptações cardíacas ao mergulho

The marine tucuxi, Sotalia guianensis, is one of the smallest known cetaceans, has coastal habits, and occurs from Hondures to Santa Catarina, in southern Brazil. The objective of this dissertation was to describe diving behavior of the marine tucuxi in three age classes and to analyze the cardiac capacity to dive through the examination of hearts of stranded specimens. Observations were made from October 2004 to November 2005 from a vantage point, in Curral Bay at Pipa beach-RN. We used Ad Libitum sampling and All occurrences to record the behaviors. The diving was characterized by the total exposition of the tail fluke for a few seconds, in 90° or 45° angles. Were recorded 131 dives in three behavioral contexts: foraging, traveling and socialization. The difference between juveniles and adults in dive time and fluke out at 45° or 90° to search and/or capture prey is probably influenced by the strategy used and ability to capture the prey. The frequency of fluke out at 90° for foraging in adults may be related to increased physiological efficiency of adults in comparison to juveniles. However, in the context of travel and socialization the dive time and fluke out were independent between the age classes. Dive in calves were frequent during socialization (play behavior) and traveling. This, associated with synchronic calve-adult diving suggests that a relationship of these behaviors and the acquisition of experience and foraging skills. As observed in other cetaceans, the heart (n=12) of the estuarine dolphin is broad and presents long ventricles which form a round apex. The right ventricle is long and narrow. The degree of dilatation of the aortic bulb may support the heart during diastole. The characteristic morphology of the heart and short dive duration < 2 min and depth ranged from 10m in the estuarine dolphin, can be likely at physiological adaptation for diving, typical de dolphins with coastal habits. The limitation of diving time in this specie may be influenced by anatomical and physiological restrictions