Visual pollution: advertising, signage and environmental quality

Book review - Visual pollution: advertising, signage and environmental quality, by Adriana Portella, Farnham, Ashgate, 2014, 316 pp., £70 (hardback).

Prospective Estimation of Radiation Dose and Image Quality for Optimized CT Performance

X-ray computed tomography (CT) is a non-invasive medical imaging technique that generates cross-sectional images by acquiring attenuation-based projection measurements at multiple angles. Since its first introduction in the 1970s, substantial technical improvements have led to the expanding use of CT in clinical examinations. CT has become an indispensable imaging modality for the diagnosis of a wide array of diseases in both pediatric and adult populations [1, 2]. Currently, approximately 272 million CT examinations are performed annually worldwide, with nearly 85 million of these in the United States alone [3]. Although this trend has decelerated in recent years, CT usage is still expected to increase mainly due to advanced technologies such as multi-energy [4], photon counting [5], and cone-beam CT [6].

Despite the significant clinical benefits, concerns have been raised regarding the population-based radiation dose associated with CT examinations [7]. From 1980 to 2006, the effective dose from medical diagnostic procedures rose six-fold, with CT contributing to almost half of the total dose from medical exposure [8]. For each patient, the risk associated with a single CT examination is likely to be minimal. However, the relatively large population-based radiation level has led to enormous efforts among the community to manage and optimize the CT dose.

As promoted by the international campaigns Image Gently and Image Wisely, exposure to CT radiation should be appropriate and safe [9, 10]. It is thus a responsibility to optimize the amount of radiation dose for CT examinations. The key for dose optimization is to determine the minimum amount of radiation dose that achieves the targeted image quality [11]. Based on such principle, dose optimization would significantly benefit from effective metrics to characterize radiation dose and image quality for a CT exam. Moreover, if accurate predictions of the radiation dose and image quality were possible before the initiation of the exam, it would be feasible to personalize it by adjusting the scanning parameters to achieve a desired level of image quality. The purpose of this thesis is to design and validate models to quantify patient-specific radiation dose prospectively and task-based image quality. The dual aim of the study is to implement the theoretical models into clinical practice by developing an organ-based dose monitoring system and an image-based noise addition software for protocol optimization.

More specifically, Chapter 3 aims to develop an organ dose-prediction method for CT examinations of the body under constant tube current condition. The study effectively modeled the anatomical diversity and complexity using a large number of patient models with representative age, size, and gender distribution. The dependence of organ dose coefficients on patient size and scanner models was further evaluated. Distinct from prior work, these studies use the largest number of patient models to date with representative age, weight percentile, and body mass index (BMI) range.

With effective quantification of organ dose under constant tube current condition, Chapter 4 aims to extend the organ dose prediction system to tube current modulated (TCM) CT examinations. The prediction, applied to chest and abdominopelvic exams, was achieved by combining a convolution-based estimation technique that quantifies the radiation field, a TCM scheme that emulates modulation profiles from major CT vendors, and a library of computational phantoms with representative sizes, ages, and genders. The prospective quantification model is validated by comparing the predicted organ dose with the dose estimated based on Monte Carlo simulations with TCM function explicitly modeled.

Chapter 5 aims to implement the organ dose-estimation framework in clinical practice to develop an organ dose-monitoring program based on a commercial software (Dose Watch, GE Healthcare, Waukesha, WI). In the first phase of the study we focused on body CT examinations, and so the patient’s major body landmark information was extracted from the patient scout image in order to match clinical patients against a computational phantom in the library. The organ dose coefficients were estimated based on CT protocol and patient size as reported in Chapter 3. The exam CTDIvol, DLP, and TCM profiles were extracted and used to quantify the radiation field using the convolution technique proposed in Chapter 4.

With effective methods to predict and monitor organ dose, Chapters 6 aims to develop and validate improved measurement techniques for image quality assessment. Chapter 6 outlines the method that was developed to assess and predict quantum noise in clinical body CT images. Compared with previous phantom-based studies, this study accurately assessed the quantum noise in clinical images and further validated the correspondence between phantom-based measurements and the expected clinical image quality as a function of patient size and scanner attributes.

Chapter 7 aims to develop a practical strategy to generate hybrid CT images and assess the impact of dose reduction on diagnostic confidence for the diagnosis of acute pancreatitis. The general strategy is (1) to simulate synthetic CT images at multiple reduced-dose levels from clinical datasets using an image-based noise addition technique; (2) to develop quantitative and observer-based methods to validate the realism of simulated low-dose images; (3) to perform multi-reader observer studies on the low-dose image series to assess the impact of dose reduction on the diagnostic confidence for multiple diagnostic tasks; and (4) to determine the dose operating point for clinical CT examinations based on the minimum diagnostic performance to achieve protocol optimization.

Chapter 8 concludes the thesis with a summary of accomplished work and a discussion about future research.

Land Use and Water Quality Correlations in Miami-Dade, Florida

South Florida continues to become increasingly developed and urbanized. My exploratory study examines connections between land use and water quality. The main objectives of the project were to develop an understanding of how land use has affected water quality in Miami-Dade canals, and an economic optimization model to estimate the costs of best management practices necessary to improve water quality. Results indicate Miami-Dade County land use and water quality are correlated. Through statistical factor and cluster analysis, it is apparent that agricultural areas are associated with higher concentrations of nitrogen, while urban areas commonly have higher levels of phosphorous than agricultural areas. The economic optimization model shows that urban areas can improve water quality by lowering fertilizer inputs. Agricultural areas can also implement methods to improve water quality although it may be more expensive than urban areas. It is important to keep solutions in mind when looking towards future water quality improvements in South Florida.

Extracting Patterns from Educational Traces via Clustering and Associated Quality Metrics

Clustering algorithms, pattern mining techniques and associated quality metrics emerged as reliable methods for modeling learners’ performance, comprehension and interaction in given educational scenarios. The specificity of available data such as missing values, extreme values or outliers, creates a challenge to extract significant user models from an educational perspective. In this paper we introduce a pattern detection mechanism with-in our data analytics tool based on k-means clustering and on SSE, silhouette, Dunn index and Xi-Beni index quality metrics. Experiments performed on a dataset obtained from our online e-learning platform show that the extracted interaction patterns were representative in classifying learners. Furthermore, the performed monitoring activities created a strong basis for generating automatic feedback to learners in terms of their course participation, while relying on their previous performance. In addition, our analysis introduces automatic triggers that highlight learners who will potentially fail the course, enabling tutors to take timely actions.

Seasonal changes in broodstock spawning performance and egg quality in ballan wrasse (Labrus bergylta)

Sea lice continue to be one of the largest issues for the salmon farming industry and the use of ballan wrasse (Labrus bergylta) as a biological control is considered to be one of the most sustainable solutions in development. Broodstock management has proved challenging in the initial phases due to the significant lack of understanding of basic reproductive physiology and behaviour in the species. The aim of the study was to monitor captive breeding populations throughout a spawning season to examine timing and duration of spawning,quantify egg production, and look at seasonal changes in egg quality parameters as well as investigate the parental contribution to spawning events. A clear spawning rhythm was shown with 3-5 spawning periods inclusive of spawning windows lasting 1-9 days followed by inter spawning intervals of 8-12 days. Fertilization rate remained consistently high (> 87.5%) over the spawning season and did not differ significantly between spawning populations. Hatch rate was variable (0-97.5 %), but peaked in the middle of the spawning season. Meanoocyte diameter and gum layer thickness decreased slightly over the spawning season with no significant differences between spawning populations. Fatty acid (FA) profile of eggs remained consistent throughout the season and with the exception of high levels of ARA (3.8 ± 0.5 % of total FA) the FA profile was similar to that observed in other marine fish species. Parental contribution analysis showed 3 out of 6 spawning events to be single paired mating while the remaining 3 had contributions from multiple parents. Furthermore, the proposed multiple batch spawning nature of this species was confirmed with proof of a single femalecontributing to two separate spawning events. Overall this work represents the first comprehensive data set of spawning activity of captive ballan wrasse, and as such and will be helpful in formulating sustainable broodstock management plans for the species.

Carcass and meat quality characteristics of Arsi-Bale goats supplemented with different levels of air-dried Moringa stenopetala leaf

This study was conducted to assess the effect of air-dried Moringa stenopetala leaf (MSL) supplementation on carcass components and meat quality in Arsi-Bale goats. A total of 24 yearling goats with initial body weight of 13.6+/-0.25 kg were randomly divided into four treatments with six goats each. All goats received a basal diet of natural grass hay ad libitum and 340 g head^(−1) d^(−1) concentrate. The treatment diets contain a control diet without supplementation (T1) and diets supplemented with MSL at a rate of 120 g head^(−1) d^(−1) (T2), 170 g head^(−1) d^(−1) (T3) and 220 g head^(−1) d^(−1) (T4). The results indicated that the average slaughter weight of goats reared on T3 and T4 was 18.2 and 18.3 kg, respectively, being (P<0.05) higher than those of T1 (15.8 kg) and T2 (16.5 kg). Goats fed on T3 and T4 diets had higher (P<0.05) daily weight gain compared with those of T1 and T2. The hot carcass weight in goats reared on T3 and T4 diets was 6.40 and 7.30 kg, respectively, being (P<0.05) higher than those of T1 (4.81 kg) and T2 (5.06 kg). Goats reared on T4 had higher (P<0.05) dressing percentage than those reared in other treatment diets. The rib-eye area in goats reared on T2, T3 and T4 diets was higher (P<0.05) than those of T1. The protein content of the meat in goats reared on T3 and T4 was 24.0 and 26.4%, respectively being significantly higher than those of T1 (19.1%) and T2 (20.1%). In conclusion, the supplementation of MSL to natural grass hay improved the weight gain and carcass parts of Arsi-Bale goats indicating Moringa leaves as alternative protein supplements to poor quality forages.

Large-Scale Controlled-Condition Experiment to Evaluate Light Weight Deflectometers for Modulus Determination and Compaction Quality Assurance of Unbound Pavement Materials

Compaction control using lightweight deflectometers (LWD) is currently being evaluated in several states and countries and fully implemented for pavement construction quality assurance (QA) by a few. Broader implementation has been hampered by the lack of a widely recognized standard for interpreting the load and deflection data obtained during construction QA testing. More specifically, reliable and practical procedures are required for relating these measurements to the fundamental material property—modulus—used in pavement design. This study presents a unique set of data and analyses for three different LWDs on a large-scale controlled-condition experiment. Three 4.5x4.5 m2 test pits were designed and constructed at target moisture and density conditions simulating acceptable and unacceptable construction quality. LWD testing was performed on the constructed layers along with static plate loading testing, conventional nuclear gauge moisture-density testing, and non-nuclear gravimetric and volumetric water content measurements. Additional material was collected for routine and exploratory tests in the laboratory. These included grain size distributions, soil classification, moisture-density relations, resilient modulus testing at optimum and field conditions, and an advanced experiment of LWD testing on top of the Proctor compaction mold. This unique large-scale controlled-condition experiment provides an excellent high quality resource of data that can be used by future researchers to find a rigorous, theoretically sound, and straightforward technique for standardizing LWD determination of modulus and construction QA for unbound pavement materials.

Vegetables production in NW Portugal, agriculture practices and groundwater quality

In NW of Portugal, the region between Esposende and Vila do Conde was established into a unique system called masseiras; masseiras are small fields that were created at the beginning of XX century by removing sand from dunes. Since the 80’s sand between closed masseiras has been removed giving way for larger fields, the “enlarged masseira with greenhouses”. This region is part of vulnerable zone nº1 (VZ1). Nowadays, the masseiras have almost disappeared; they had been replaced by “enlarged masseiras with plastic greenhouses” exploited by a new generation of growers. As water quality is an indicator of agriculture practices, 8 wells were selected and water samples were collected on four dates from September 2009 to May 2010. Laboratorial analysis was performed on nitrates and 28 pesticides. The results confirm that water in VZ1 is contaminated with nitrates (as it was expected) and also with pesticides. The water was contaminated in both dug wells and drilled wells all year round. Masseiras’ wells have more nitrates than greenhouses’ wells, probably due to poor agricultural practices used by growers who still employ high quantities of fertilizers and water. Pesticides detected in water samples include some that have been sprayed in the field and others that have not. Some forbidden substances were found. Our results confirm that, in VZ1, there is a diffusion contamination, which origin is unknown. In this communication, we put in picture the history of masseiras fields: how masseiras fields have been created and how they have disappeared; what trends exist in pest management strategies and the use of fertilizers, pesticides and water resources. These results reinforce the need to change the agricultural system in this region of traditional vegetable production.

Genetic variation in growth and wood-quality traits of Corymbia citriodora subsp. variegata across three sites in south-east Queensland, Australia

Ten growth or wood-quality traits were assessed in three nearby Corymbia citriodora subsp. variegata (CCV) open-pollinated family-within-provenance trials (18 provenances represented by a total of 374 families) to provide information for the development of a breeding program targeting both pulp and solid-wood products. Growth traits (diameter at breast high over bark [DBH], height and conical volume) were assessed at 3 and 7 years of age. Wood-quality traits (density [DEN], Kraft pulp yield [KPY], modulus of elasticity [MoE] and microfibril angle [MfA]) were predicted using near-infrared spectroscopy on wood samples collected from these trials when aged between 10 and 12 years. The high average KPY, DEN and MoE, and low average MfA observed indicates CCV is very suitable for both pulp and timber products. All traits were under moderate to strong genetic control. In across- trials analyses, high (>0.4) heritability estimates were observed for height, DEN, MoE and MfA, while moderate heritability estimates (0.24 to 0.34) were observed for DBH, volume and KPY. Most traits showed very low levels of genotype × site interaction. Estimated age–age genetic correlations for growth traits were strong at both the family (0.97) and provenance (0.99) levels. Relationships among traits (additive genetic correlation estimates) were favourable, with strong and positive estimates between growth traits (0.84 to 0.98), moderate and positive values between growth and wood-quality traits (0.32 to 0.68), moderate and positive between KPY and MoE (0.64), and high and positive between DEN and MoE (0.82). However, negative (but favourable) correlations were detected between MfA and all other evaluated traits (−0.31 to −0.96). The genetic correlation between the same trait expressed on two different sites, at family level, ranged from 0.24 to 0.42 for growth traits, and from 0.29 to 0.53 for wood traits. Therefore simultaneous genetic improvement of growth and wood property traits in CCV for the target environment in south-east Queensland should be possible, given the moderate to high estimates of heritability and favourable correlations amongst all traits studied, unless genotype × site interactions are greater than was evident. © 2016 NISC (Pty) Ltd

Investigation on water and sediment quality variation from coast to off shore and its relation to bent hoses biodiversity: case study Bandar tahery

This paper deals with the qualification of water and sediment particularly those of benthos, as well as their interaction results, through careful laboratory researches within 24 experimental sites around the bank of Bandar Taheri, Persian Gulf water of Iranian borders, under 13th phase south Pars project. Samples were carried to the laboratories and careful experimental tests such as physical chemical, heavy metal, nitrate ammoniac, toc and other biologic tests including various type of benthos count were performed. Data gained through Shanon and Dankan statistical analyses were also studied to determine the water, sediment and pollution rate. Resulted information would classify the area as less polluted area which is rather away from critical environmental zone, another word the area could be liable to change to an undesired one while the density rates of principal metals follows the Fe>Mn>Zn>Cu>Pb>Cd>N pattern.

Controlled Vocabulary Enhancement through Crowdsourcing: Project Andvari, Micropasts, and Public Quality Assurance

Proceedings paper published by Society of American Archivists. Presented at conference in 2015 in Cleveland, OH (http://www2.archivists.org/proceedings/research-forum/2015/agenda#papers). Published by SAA in 2016.

Observed Social Problem Solving and Friendship Quality in Children with a Traumatic Brain Injury

Children who have experienced a traumatic brain injury (TBI) are at risk for a variety of maladaptive cognitive, behavioral and social outcomes (Yeates et al., 2007). Research involving the social problem solving (SPS) abilities of children with TBI indicates a preference for lower level strategies when compared to children who have experienced an orthopedic injury (OI; Hanten et al., 2008, 2011). Research on SPS in non-injured populations has highlighted the significance of the identity of the social partner (Rubin et al., 2006). Within the pediatric TBI literature few studies have utilized friends as the social partner in SPS contexts, and fewer have used in-vivo SPS assessments. The current study aimed to build on existing research of SPS in children with TBI by utilizing an observational coding scheme to capture in-vivo problem solving behaviors between children with TBI and a best friend. The current study included children with TBI (n = 41), children with OI (n = 43), and a non-injured typically developing group (n = 41). All participants were observed completing a task with a friend and completed a measure of friendship quality. SPS was assessed using an observational coding scheme that captured SPS goals, strategies, and outcomes. It was expected children with TBI would produce fewer successes, fewer direct strategies, and more avoidant strategies. ANOVAs tested for group differences in SPS successes, direct strategies and avoidant strategies. Analyses were run to see if positive or negative friendship quality moderated the relation between group type and SPS behaviors. Group differences were found between the TBI and non-injured group in the SPS direct strategy of commands. No group differences were found for other SPS outcome variables of interest. Moderation analyses partially supported study hypotheses regarding the effect of friendship quality as a moderator variable. Additional analyses examined SPS goal-strategy sequencing and grouped SPS goals into high cost and low cost categories. Results showed a trend supporting the hypothesis that children with TBI had fewer SPS successes, especially with high cost goals, compared to the other two groups. Findings were discussed highlighting the moderation results involving children with severe TBI.

Bone Mass and Bone Quality Are Altered by Hypoactivity in the Chicken

International audience

Economic development and Environmental quality: The environmental Kuznets curve for water pollution

The main aim of this study was to analyze evidence of an environmental Kuznets curve for water pollution in the developing and developed countries. The study was conducted based on a panel data set of 54 countries – that were categorized into six groups of “developed countries”, “developing countries”, “developed countries with low income”, “developed countries with high income” and “coastal countries”- between the years 1995 to 2006. The results do not confirm the inverted U-shape of EKC curve for the developed countries with low income. Based on the estimated turning points and the average GDP per capita, the study revealed at which point of the EKC the countries are. Furthermore, impacts of capital-and-labor ratio as well as trade openness are drawn by estimating different models for the EKC. The magnitude role of each explanatory variable on BOD was calculated by estimating the associated elasticity.