Quantitative multi-parameter mapping of R1, PD(*), MT, and R2(*) at 3T: a multi-center validation.

Multi-center studies using magnetic resonance imaging facilitate studying small effect sizes, global population variance and rare diseases. The reliability and sensitivity of these multi-center studies crucially depend on the comparability of the data generated at different sites and time points. The level of inter-site comparability is still controversial for conventional anatomical T1-weighted MRI data. Quantitative multi-parameter mapping (MPM) was designed to provide MR parameter measures that are comparable across sites and time points, i.e., 1 mm high-resolution maps of the longitudinal relaxation rate (R1 = 1/T1), effective proton density (PD(*)), magnetization transfer saturation (MT) and effective transverse relaxation rate (R2(*) = 1/T2(*)). MPM was validated at 3T for use in multi-center studies by scanning five volunteers at three different sites. We determined the inter-site bias, inter-site and intra-site coefficient of variation (CoV) for typical morphometric measures [i.e., gray matter (GM) probability maps used in voxel-based morphometry] and the four quantitative parameters. The inter-site bias and CoV were smaller than 3.1 and 8%, respectively, except for the inter-site CoV of R2(*) (<20%). The GM probability maps based on the MT parameter maps had a 14% higher inter-site reproducibility than maps based on conventional T1-weighted images. The low inter-site bias and variance in the parameters and derived GM probability maps confirm the high comparability of the quantitative maps across sites and time points. The reliability, short acquisition time, high resolution and the detailed insights into the brain microstructure provided by MPM makes it an efficient tool for multi-center imaging studies.

Ecological-niche factor analysis: how to compute habitat-suitability maps without absence data?

We propose a multivariate approach to the study of geographic species distribution which does not require absence data. Building on Hutchinson's concept of the ecological niche, this factor analysis compares, in the multidimensional space of ecological variables, the distribution of the localities where the focal species was observed to a reference set describing the whole study area. The first factor extracted maximizes the marginality of the focal species, defined as the ecological distance between the species optimum and the mean habitat within the reference area. The other factors maximize the specialization of this focal species, defined as the ratio of the ecological variance in mean habitat to that observed for the focal species. Eigenvectors and eigenvalues are readily interpreted and can be used to build habitat-suitability maps. This approach is recommended in Situations where absence data are not available (many data banks), unreliable (most cryptic or rare species), or meaningless (invaders). We provide an illustration and validation of the method for the alpine ibex, a species reintroduced in Switzerland which presumably has not yet recolonized its entire range.

Morphological and molecular diversity among cassava genotypes

The objective of this work was to characterize morphologically and molecularly the genetic diversity of cassava accessions, collected from different regions in Brazil. A descriptive analysis was made for 12 morphological traits in 419 accessions. Data was transformed into binary data for cluster analysis and analysis of molecular variance. A higher proportion of white or cream (71%) root cortex color was found, while flesh colors were predominantly white (49%) and cream (42%). Four accession groups were classified by the cluster analysis, but they were not grouped according to their origin, which indicates that diversity is not structured in space. The variation was greater within regions (95.6%). Sixty genotypes were also evaluated using 14 polymorphic microsatellite markers. Molecular results corroborated the morphological ones, showing the same random distribution of genotypes, with no grouping according to origin. Diversity indices were high for each region, and a greater diversity was found within regions, with: a mean number of alleles per locus of 3.530; observed and expected heterozygosity of 0.499 and 0.642, respectively; and Shannon index of 1.03. The absence of spatial structure among cassava genotypes according to their origins shows the anthropic influence in the distribution and movement of germplasm, both within and among regions.

Energy deficit and length of hospital stay can be reduced by a two-step quality improvement of nutrition therapy: the intensive care unit dietitian can make the difference.

OBJECTIVE: Critically ill patients are at high risk of malnutrition. Insufficient nutritional support still remains a widespread problem despite guidelines. The aim of this study was to measure the clinical impact of a two-step interdisciplinary quality nutrition program. DESIGN: Prospective interventional study over three periods (A, baseline; B and C, intervention periods). SETTING: Mixed intensive care unit within a university hospital. PATIENTS: Five hundred seventy-two patients (age 59 ± 17 yrs) requiring >72 hrs of intensive care unit treatment. INTERVENTION: Two-step quality program: 1) bottom-up implementation of feeding guideline; and 2) additional presence of an intensive care unit dietitian. The nutrition protocol was based on the European guidelines. MEASUREMENTS AND MAIN RESULTS: Anthropometric data, intensive care unit severity scores, energy delivery, and cumulated energy balance (daily, day 7, and discharge), feeding route (enteral, parenteral, combined, none-oral), length of intensive care unit and hospital stay, and mortality were collected. Altogether 5800 intensive care unit days were analyzed. Patients in period A were healthier with lower Simplified Acute Physiologic Scale and proportion of "rapidly fatal" McCabe scores. Energy delivery and balance increased gradually: impact was particularly marked on cumulated energy deficit on day 7 which improved from -5870 kcal to -3950 kcal (p < .001). Feeding technique changed significantly with progressive increase of days with nutrition therapy (A: 59% days, B: 69%, C: 71%, p < .001), use of enteral nutrition increased from A to B (stable in C), and days on combined and parenteral nutrition increased progressively. Oral energy intakes were low (mean: 385 kcal*day, 6 kcal*kg*day ). Hospital mortality increased with severity of condition in periods B and C. CONCLUSION: A bottom-up protocol improved nutritional support. The presence of the intensive care unit dietitian provided significant additional progression, which were related to early introduction and route of feeding, and which achieved overall better early energy balance.

Warranties used as a mean to promote commercial FOSS

From a business standpoint, this paper describes the point of view on the question of warranties of a FOSS editor doing business in a risk-averse market segment. It is based on 15-years experience of AdaCore in the safety-critical embedded industry. However, it is not only the point of view of a provider, as it also aims at demonstrating that the interests of providers and users are aligned in this area. From a legal point of view, the enforceability of these warranties will be partly covered, as well as the articulation between the license and the warranties on one hand, and the articulation between the license and the other contracts that can be created in a business relationship on the other hand.

Electromyographic, cerebral, and muscle hemodynamic responses during intermittent, isometric contractions of the biceps brachii at three submaximal intensities.

This study examined the electromyographic, cerebral and muscle hemodynamic responses during intermittent isometric contractions of biceps brachii at 20, 40, and 60% of maximal voluntary contraction (MVC). Eleven volunteers completed 2 min of intermittent isometric contractions (12/min) at an elbow angle of 90° interspersed with 3 min rest between intensities in systematic order. Surface electromyography (EMG) was recorded from the right biceps brachii and near infrared spectroscopy (NIRS) was used to simultaneously measure left prefrontal and right biceps brachii oxyhemoglobin (HbO2), deoxyhemoglobin (HHb), and total hemoglobin (Hbtot). Transcranial Doppler ultrasound was used to measure middle cerebral artery velocity (MCAv) bilaterally. Finger photoplethysmography was used to record beat-to-beat blood pressure and heart rate. EMG increased with force output from 20 to 60% MVC (P < 0.05). Cerebral HbO2 and Hbtot increased while HHb decreased during contractions with differences observed between 60% vs. 40% and 20% MVC (P < 0.05). Muscle HbO2 decreased while HHb increased during contractions with differences being observed among intensities (P < 0.05). Muscle Hbtot increased from rest at 20% MVC (P < 0.05), while no further change was observed at 40 and 60% MVC (P > 0.05). MCAv increased from rest to exercise but was not different among intensities (P > 0.05). Force output correlated with the root mean square EMG and changes in muscle HbO2 (P < 0.05), but not changes in cerebral HbO2 (P > 0.05) at all three intensities. Force output declined by 8% from the 1st to the 24th contraction only at 60% MVC and was accompanied by systematic increases in RMS, cerebral HbO2 and Hbtot with a leveling off in muscle HbO2 and Hbtot. These changes were independent of alterations in mean arterial pressure. Since cerebral blood flow and oxygenation were elevated at 60% MVC, we attribute the development of fatigue to reduced muscle oxygen availability rather than impaired central neuronal activation.

Random regression models to estimate genetic parameters for milk production of Guzerat cows using orthogonal Legendre polynomials

The objective of this work was to compare random regression models for the estimation of genetic parameters for Guzerat milk production, using orthogonal Legendre polynomials. Records (20,524) of test-day milk yield (TDMY) from 2,816 first-lactation Guzerat cows were used. TDMY grouped into 10-monthly classes were analyzed for additive genetic effect and for environmental and residual permanent effects (random effects), whereas the contemporary group, calving age (linear and quadratic effects) and mean lactation curve were analized as fixed effects. Trajectories for the additive genetic and permanent environmental effects were modeled by means of a covariance function employing orthogonal Legendre polynomials ranging from the second to the fifth order. Residual variances were considered in one, four, six, or ten variance classes. The best model had six residual variance classes. The heritability estimates for the TDMY records varied from 0.19 to 0.32. The random regression model that used a second-order Legendre polynomial for the additive genetic effect, and a fifth-order polynomial for the permanent environmental effect is adequate for comparison by the main employed criteria. The model with a second-order Legendre polynomial for the additive genetic effect, and that with a fourth-order for the permanent environmental effect could also be employed in these analyses.

Verkkovaihtosuuntaajan vektorisäädön toteutus FPGA-piirillä

Verkkovaihtosuuntaajalla pystytään muuntamaan tasajännite vaihtojännitteeksi ja päinvastoin. Verkkovaihtosuuntaajan toiminta perustuu tehokytkinten ohjaukseen ja sopivan modulointimenetelmän käyttöön. Vektorisäädössä vaihtosuuntaajanvirrat ja jännitteet esitetään kompleksitasossa, jolloin virta- ja jännitekomponentit voidaan esittää vektoreina. Vektorisäädössä verkkovaihtosuuntaajan ohjaustoteutetaan laskemalla kompleksitasossa vektoreille arvot, jotka tuottavat vaihtosuuntaajan lähtöön halutun vektorin. Koska FPGA-piirit mahdollistavat nopean rinnakkaisen laskennan, soveltuvat ne hyvin vektorisäädön toteuttamiseen. FPGA-piirien rakenteesta johtuen on säätöjärjestelmän suunnittelussa huomioitava kiinteän pilkun lukujen riittävä bittileveys ja järjestelmän diskretointiaika. Työssä suunnitellaan verkkovaihtosuuntaajan vektorisäätö ja tutkitaan bittileveyden vaikutusta säädön toteuttamiseen FPGA-piirillä. Bittileveyden tarkasteluun esitetään käytettäväksi tilastollisia menetelmiä. Työssä tarkastellaan kiinteän pilkun järjestelmän ja liukulukujärjestelmän erosuureen tilastollisia tunnusmerkkejä sekä histogrammia. Tarkasteluissa huomattiin, että maksimivirhe itsessään ei tarjoa riittävästi tietoa erosuureen jakautumisesta. Näin ollen maksimivirhe ei ole kaikissa tilanteissa sovelias menetelmä riittävän bittitarkkuuden määrittämiseen. Työssä esitetään riittävän bittitarkkuuden määrittelemiseen käytettäväksi otossuureista otosvarianssia, keskipoikkeamaa ja vaihteluväliä.

Thermogenesis in obese women: effect of fructose vs. glucose added to a meal.

To assess the effect of a fructose meal on resting energy expenditure (EE), indirect calorimetry was used in 23 women (10 lean and 13 obese) for 30 min before and 6 h after the ingestion of a mixed meal containing 20% protein, 33% fat, and either 75 g glucose or 75 g fructose as carbohydrate source (47%). Expressed as a percentage of the energy content of the meal, the thermogenic response to the fructose meal was significantly greater (10.2 +/- 0.5%) than that of the glucose meal (8.4 +/- 0.4%, P less than 0.01). This difference was still apparent when the lean and obese women were considered separately. The mean respiratory quotient during the 6-h postprandial period was significantly greater (P less than 0.01) for the fructose (0.85 +/- 0.01) than for the glucose meal (0.83 +/- 0.01) in the combined subjects. In addition, cumulative carbohydrate oxidation was significantly greater after the fructose than after the glucose meal (51.1 +/- 2.3 vs. 40.9 +/- 2.0 g/6 h, respectively, P less than 0.01). Only small changes were observed in postprandial plasma levels of glucose and insulin after the fructose meal, but the plasma levels of lactate increased more with fructose than with the glucose meal. These results suggest that there might be some advantages (higher thermogenesis and carbohydrate oxidations) in using fructose as part of the carbohydrate source in diet of people with obesity and/or insulin resistance.

Illite "crystallinity'' revisited

The Kubler Index (KI) is defined as the full width at half-maximum height (FWHM) of the 10-Angstrom X-ray diffraction peak of illite-smectite interstratified (I-S) clay minerals, The only parameters controlling the Kubler index are assumed to be the mean number of layers (N) in the coherent scattering domains (CSD). the variance of the distribution of the number of layers of the CSB, the mean percentage of smectite layers in I-S (%S), and the probability of layer stocking (Reichweite). The Kubler-Index measurements on ah-dried (KIAD) and ethylene-glycolated (KIEG) samples were compared to N and %S using the NEWMOD computer program to simulate X-ray diffraction patterns. Charts of KIAD versus KIEG corrected for instrumental broadening were made and isolines were mapped for constant N and CLS. Isolines allow a direct and rapid determination of N and RS from KI measurements. The method allows quantification of the metamorphic anchizone limits by considering mean thickness of fundamental particles in MacEwan crystallites. The transition from diagenesis to the anchizone and from the anchizone to the epizone of low-grade metamorphism corresponds to thicknesses of 20- and 70-layer fundamental particles, respectively.

Validation of the spiritual distress assessment tool in older hospitalized patients.

ABSTRACT:¦BACKGROUND: The Spiritual Distress Assessment Tool (SDAT) is a 5-item instrument developed to assess unmet spiritual needs in hospitalized elderly patients and to determine the presence of spiritual distress. The objective of this study was to investigate the SDAT psychometric properties.¦METHODS: This cross-sectional study was performed in a Geriatric Rehabilitation Unit. Patients (N = 203), aged 65 years and over with Mini Mental State Exam score ≥ 20, were consecutively enrolled over a 6-month period. Data on health, functional, cognitive, affective and spiritual status were collected upon admission. Interviews using the SDAT (score from 0 to 15, higher scores indicating higher distress) were conducted by a trained chaplain. Factor analysis, measures of internal consistency (inter-item and item-to-total correlations, Cronbach α), and reliability (intra-rater and inter-rater) were performed. Criterion-related validity was assessed using the Functional Assessment of Chronic Illness Therapy-Spiritual well-being (FACIT-Sp) and the question "Are you at peace?" as criterion-standard. Concurrent and predictive validity were assessed using the Geriatric Depression Scale (GDS), occurrence of a family meeting, hospital length of stay (LOS) and destination at discharge.¦RESULTS: SDAT scores ranged from 1 to 11 (mean 5.6 ± 2.4). Overall, 65.0% (132/203) of the patients reported some spiritual distress on SDAT total score and 22.2% (45/203) reported at least one severe unmet spiritual need. A two-factor solution explained 60% of the variance. Inter-item correlations ranged from 0.11 to 0.41 (eight out of ten with P < 0.05). Item-to-total correlations ranged from 0.57 to 0.66 (all P < 0.001). Cronbach α was acceptable (0.60). Intra-rater and inter-rater reliabilities were high (Intraclass Correlation Coefficients ranging from 0.87 to 0.96). SDAT correlated significantly with the FACIT-Sp, "Are you at peace?", GDS (Rho -0.45, -0.33, and 0.43, respectively, all P < .001), and LOS (Rho 0.15, P = .03). Compared with patients showing no severely unmet spiritual need, patients with at least one severe unmet spiritual need had higher odds of occurrence of a family meeting (adjOR 4.7, 95%CI 1.4-16.3, P = .02) and were more often discharged to a nursing home (13.3% vs 3.8%; P = .027).¦CONCLUSIONS: SDAT has acceptable psychometrics properties and appears to be a valid and reliable instrument to assess spiritual distress in elderly hospitalized patients.

The influence of the quality of government institutions on entrepreneurial motivation: exploring the variance across countries

Despite the increasing understanding of the relationships between institutions and entrepreneurship, the influence of the quality of government institutions on entrepreneurship is less addressed. This paper focuses on this critical determinant of entrepreneurship in developing and developed countries. Drawing from institutional theory we hypothesize and empirically assess the role of the quality of institutions in entrepreneurial activity. We examine how the quality of government institutions influences the rate of necessity-based entrepreneurial activity across countries and over time by using a cross-sectional time-series approach on data from the Global Entrepreneurship Monitor (GEM) database covering the years 2001–2011. Our results suggest that higher economic development associated with better quality of institutions reduces the prevalence of necessity-based entrepreneurship. Our findings imply that developing countries must rationally organize their functions, and seek to remove unnecessary barriers, decrease political instability, and controls that hamper entrepreneurial activity

Gait disturbances as specific predictive markers of the first fall onset in elderly people: a two-year prospective observational study

Falls are common in the elderly, and potentially result in injury and disability. Thus, preventing falls as soon as possible in older adults is a public health priority, yet there is no specific marker that is predictive of the first fall onset. We hypothesized that gait features should be the most relevant variables for predicting the first fall. Clinical baseline characteristics (e.g., gender, cognitive function) were assessed in 259 home-dwelling people aged 66 to 75 that had never fallen. Likewise, global kinetic behavior of gait was recorded from 22 variables in 1036 walking tests with an accelerometric gait analysis system. Afterward, monthly telephone monitoring reported the date of the first fall over 24 months. A principal components analysis was used to assess the relationship between gait variables and fall status in four groups: non-fallers, fallers from 0 to 6 months, fallers from 6 to 12 months and fallers from 12 to 24 months. The association of significant principal components (PC) with an increased risk of first fall was then evaluated using the area under the Receiver Operator Characteristic Curve (ROC). No effect of clinical confounding variables was shown as a function of groups. An eigenvalue decomposition of the correlation matrix identified a large statistical PC1 (termed "Global kinetics of gait pattern"), which accounted for 36.7% of total variance. Principal component loadings also revealed a PC2 (12.6% of total variance), related to the "Global gait regularity." Subsequent ANOVAs showed that only PC1 discriminated the fall status during the first 6 months, while PC2 discriminated the first fall onset between 6 and 12 months. After one year, any PC was associated with falls. These results were bolstered by the ROC analyses, showing good predictive models of the first fall during the first six months or from 6 to 12 months. Overall, these findings suggest that the performance of a standardized walking test at least once a year is essential for fall prevention.

Predicción de la densidad de pulgones en alfalfa a partir de un muestreo presencia-ausencia

La estimación de la media de la densidad de pulgones en alfalfa basada en conteos de campo se compara con el muestreo presencia-ausencia. Se obtuvieron 21 muestras aleatorias formadas por 75 tallos obtenidos en campos comerciales de alfalfa en Lleida (valle del Ebro) con el objetivo de predecir la estimación de la densidad media de pulgones (û) a partir de la estimación de la proporción de tallos infestados (p). La relación empírica entre û y su varianza muestral utilizando como modelo la ley potencial de Taylor es satisfactoria (r2 = 0,98). La relación empírica entre p y su varianza muestral es prácticamente binomial. Finalmente, la relación empírica entre û y p a partir de la regresión lineal entre ln(û) y ln(-ln p) fue satisfactoria (r2 = 0,94). A partir del muestreo presencia-ausencia es posible estimar densidades medias de pulgones de hasta unos 20 pulgones por tallo.