User modeling In adaptive hypermedia educational systems

This document is a survey in the research area of User Modeling (UM) for the specific field of Adaptive Learning. The aims of this document are: To define what it is a User Model; To present existing and well known User Models; To analyze the existent standards related with UM; To compare existing systems. In the scientific area of User Modeling (UM), numerous research and developed systems already seem to promise good results, but some experimentation and implementation are still necessary to conclude about the utility of the UM. That is, the experimentation and implementation of these systems are still very scarce to determine the utility of some of the referred applications. At present, the Student Modeling research goes in the direction to make possible reuse a student model in different systems. The standards are more and more relevant for this effect, allowing systems communicate and to share data, components and structures, at syntax and semantic level, even if most of them still only allow syntax integration.

Knowledge, attitude and practice of mammography among women users of public health services

OBJECTIVE: To evaluate knowledge, attitude and practice related to mammography among women users of local health services, identifying barriers to its performance. METHODS: A total of 663 women were interviewed at 13 local health centers in a city of Southeastern Brazil, in 2001. Interviewees were randomly selected at each center and they were representative from different socioeconomic conditions. The number of interviewees at each center was proportional to monthly mean appointments. For data analysis, answers were described as knowledge, attitude, practice and their respective adequacies and then they were correlated with control variables through the chi-square test. RESULTS: Only 7.4% of the interviewees had adequate knowledge on mammography, while 97.1% of women had an adequate attitude. The same was seen for the practice of mammography that was adequate in 35.7% of the cases. The main barrier to mammography was lack of referral by physicians working at the health center (81.8%). There was an association between adequacy of attitude and five years or more of education and being married. There was also an association between adequacy of mammography practice and being employed and family income up to four minimum wages. CONCLUSIONS: Women users of local health services had no adequate knowledge and practice related to mammography despite having an adequate attitude about this exam.

Lar militar: projecto de execução

Trabalho Final de Mestrado para obtenção do grau de mestre em Engenharia Civil na Área de Especialização em Estruturas

Redes de rega de campos de golfe

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Transacção de componentes multimédia suportada por agentes

O objectivo do projecto descrito nesta dissertação é o desenvolvimento da interface entre as empresas e a plataforma Business-to-Business (B2B) de negociação automática de anúncios em construção. A plataforma, no seu todo, deve garantir que os intervalos da programação são preenchidos com um alinhamento de anúncios compatível com os interesses expressos e o perfil construído dos espectadores. A plataforma funciona como um mercado electrónico de negociação automática destinado a agências de publicidade (empresas produtoras) e empresas provedoras de conteúdos e serviços multimédia aos consumidores finais (empresas distribuidoras). As empresas, uma vez registadas na plataforma, passam a ser representadas por agentes que negoceiam automaticamente os itens submetidos com o comportamento especificado. Do ponto de vista da arquitectura, a plataforma consiste num sistema multiagente organizado em três camadas compostas por: (i) agentes de interface com as empresas; (ii) agentes de modelação das empresas; e (iii) agentes delegados, de duração efémera, exclusivamente criados para participar em negociações específicas de conteúdos multimédia. Cada empresa representada na plataforma possui, para além de um número indeterminado de delegados envolvidos em negociações específicas, dois agentes: (i) o agente de interface com a empresa, que expõe um conjunto de operações de interface ao exterior através de um serviço Web, localizado na primeira camada; e (ii) o agente que modela a empresa na plataforma, que expõe através de um serviço Web um conjunto de operações aos agentes das restantes camadas da plataforma, residente na camada intermédia. Este projecto focou-se no desenvolvimento da camada superior de interface da plataforma com as empresas e no enriquecimento da camada intermédia. A realização da camada superior incluiu a especificação da parte da ontologia da plataforma que dá suporte às operações de interface com o exterior, à sua exposição como serviços Web e à criação e controlo dos agentes de interface. Esta camada superior deve permitir às empresas carregar e descarregar toda informação relevante de e para a plataforma, através de uma interface gráfica ou de forma automática, e apresentar de forma gráfica e intuitiva os resultados alcançados, nomeadamente, através da apresentação da evolução das transacções. Em relação à camada intermédia, adicionou-se à ontologia da plataforma a representação do conhecimento de suporte às operações de interface com a camada superior, adoptaram-se taxonomias de classificação de espectadores, anúncios e programas, desenvolveu-se um algoritmo de emparelhamento entre os espectadores, programas e anúncios disponíveis e, por fim, procedeu-se ao armazenamento persistente dos resultados das negociações. Do ponto de vista da plataforma, testou-se o seu funcionamento numa única plataforma física e assegurou-se a segurança e privacidade da comunicação entre empresa e plataforma e entre agentes que representam uma mesma empresa.

Simulação e programação offline de robôs industriais afectos a tarefas de lixagem

Este trabalho teve o intuito de testar a viabilidade da programação offline para tarefas de lixamento na empresa Grohe Portugal. Para tal era necessário perceber o que é a programação offline e para isso foi efectuada uma pesquisa referente a essa temática, onde ficou evidente que a programação offline é em tudo semelhante à programação online, tendo apenas como principal diferença o facto de não usar o robô propriamente dito durante o desenvolvimento do programa. Devido à ausência do robô, a programação offline exige que se conheça detalhadamente a célula de trabalho, bem como todas as entradas e saídas associadas à célula, sendo que o conhecimento das entradas e saídas pode ser contornada carregando um backup do robô ou carregando os módulos de sistema. No entanto os fabricantes habitualmente não fornecem informação detalhada sobre as células de trabalho, o que dificulta o processo de implementação da unidade no modelo 3D para a programação offline. Após este estudo inicial, foi efectuado um estudo das características inerentes a cada uma das células existentes, com o objectivo de se obter uma melhor percepção de toda a envolvente relacionada com as tarefas de lixamento. Ao longo desse estudo efectuaram-se vários testes para validar os diversos programas desenvolvidos, bem como para testar a modelação 3D efectuada. O projecto propriamente dito consistiu no desenvolvimento de programas offline de forma a minimizar o impacto (em especial o tempo de paragem) da programação de novos produtos. Todo o trabalho de programação era até então feito utilizando o robô, o que implicava tempos de paragem que podiam ser superiores a três dias. Com o desenvolvimento dos programas em modo offline conseguiu-se reduzir esse tempo de paragem dos robôs para pouco mais de um turno (8h), existindo apenas a necessidade de efectuar algumas afinações e correcções nos movimentos de entrada, saída e movimentações entre rotinas e unidades, uma vez que estes movimentos são essenciais ao bom acabamento da peça e convém que seja suaves. Para a realização e conclusão deste projecto foram superadas diversas etapas, sendo que as mais relevantes foram: - A correcta modelação 3D da célula, tendo em conta todo o cenário envolvente, para evitar colisões do robô com a célula; - A adaptação da programação offline para uma linguagem mais usual aos afinadores, ou seja, efectuar a programação com targets inline e criar diferentes rotinas para cada uma das partes da peça, facilitando assim a afinação; - A habituação à programação recorrendo apenas ao uso de módulos para transferir os programas para a célula, bem como a utilização de entradas, saídas e algumas rotinas e funcionalidades já existentes.

Contribuição da fluorescência de Raios–X na avaliação e modelação de georrecursos

O presente estudo diz respeito a um trabalho de pesquisa no âmbito de uma Tese de Mestrado compreendida no segundo ciclo de estudos do curso de Engenharia Geotécnica e Geoambiente, realizado sobre a contribuição da Fluorescência de Raios – X (FRX) no Zonamento de Georrecursos, com particular ênfase para a utilização do instrumento portátil e de ferramentas tecnológicas de vanguarda, indispensáveis à prospecção e exploração dos recursos minerais, designadamente na interpretação e integração de dados de natureza geológica e na modelação de métodos de exploração e processamento /tratamento de depósitos minerais, assim como do respectivo controlo. Esta dissertação discute os aspectos fundamentais da utilização da técnica de Fluorescência de Raios-X (portátil, FRXP), quanto à sua possibilidade de aplicação e metodologia exigida, com vista à definição de zonas com características químicas análogas do georrecurso e que preencham as exigências especificadas para a utilização da matéria-prima, nas indústrias consumidoras. Foi elaborada uma campanha de recolha de amostras de calcário proveniente da pedreira do Sangardão, em Condeixa–a–Nova, que numa primeira fase teve como objectivo principal a identificação da composição química da área em estudo e o grau de precisão do aparelho portátil de FRX. Para além desta análise foram, também, realizadas análises granulométricas por peneiração e sedimentação por Raios-X a amostras provenientes das bacias de sedimentação e do material passado no filtro prensa. Validado o método de análise por FRXP, realizou-se uma segunda fase deste trabalho, que consistiu na elaboração de uma amostragem bastante significativa de pontos, onde se realizaram análises por FRXP, de forma a obter uma maior cobertura química da área em estudo e localizar os locais chave de exploração da matéria-prima. Para uma correcta leitura dos dados analisados recorreu-se a ferramentas aliadas às novas tecnologias, as quais se mostraram um importante contributo para uma boa gestão do georrecurso em avaliação, nomeadamente o “XLSTAT” e o “Surfer” para tratamento estatístico dos dados e modelação, respectivamente.

Public health and the knowledge industry

Knowledge plays an important role in health care. The production and diffusion of health-related knowledge are increasingly under the control of private commercial interests, which are characterized by conflicts of interests that result in abuses of power. Considerable research has been done on the medical-industrial complex and its role in the production of power imbalances and the consequent abuses, but little attention has been dedicated to the role played by the publishing industry, which can be subject to the same problems. The widely diffused idea that "frequent and major changes" occur in medicine, albeit unsupported by clearcut evidence, is an effective marketing tool for both the pharmaceutical and publishing industries, who feed and thrive on physicians' insecurities. The production and distribution of knowledge should be addressed as a strategic component of public health.

Neural-network approach to modeling liquid crystals in complex confinement

Finding the structure of a confined liquid crystal is a difficult task since both the density and order parameter profiles are nonuniform. Starting from a microscopic model and density-functional theory, one has to either (i) solve a nonlinear, integral Euler-Lagrange equation, or (ii) perform a direct multidimensional free energy minimization. The traditional implementations of both approaches are computationally expensive and plagued with convergence problems. Here, as an alternative, we introduce an unsupervised variant of the multilayer perceptron (MLP) artificial neural network for minimizing the free energy of a fluid of hard nonspherical particles confined between planar substrates of variable penetrability. We then test our algorithm by comparing its results for the structure (density-orientation profiles) and equilibrium free energy with those obtained by standard iterative solution of the Euler-Lagrange equations and with Monte Carlo simulation results. Very good agreement is found and the MLP method proves competitively fast, flexible, and refinable. Furthermore, it can be readily generalized to the richer experimental patterned-substrate geometries that are now experimentally realizable but very problematic to conventional theoretical treatments.

Locus of control and contraceptive knowledge, attitude and practice among university students

OBJECTIVE: To assess the relationship between locus of control and knowledge, attitude and practice regarding pill and condom use among university students. METHODS: The inquiry was developed in Campinas, a city in Southeastern Brazil, in 2006. A total of 295 adolescent newcomers to a public university answered a structured questionnaire and Levenson's multidimensional locus of control scale. The scores of the dimensions of locus of control were calculated and Spearman's correlation coefficient was used to assess their correlation with knowledge and practice concerning pill and condom use. In order to assess the relationship between the dimensions of locus of control and sociodemographic variables and variables related to the individuals' sex life, Kruskal-Wallis and Mann-Whitney tests were used. RESULTS: Male adolescents had higher scores of powerful others externality when compared to female adolescents (p=0.01). Students living alone had lower internality (p=0.01). When locus of control was compared to condom use in the first intercourse, considering only the 102 students who informed the age of the beginning of sexual activity, greater internality was found among male adolescents who did not use condoms (p<0.05). When the locus of control scores were correlated with contraceptive knowledge and practice, it was found that the higher the powerful others externality locus, the lower the adequate use of contraceptive methods (r = -0.22, p=0.03). CONCLUSIONS: The powerful others externality locus influences the practice of contraceptive use in this group of adolescents.

Analysis of tongue shape and motion in speech production using statistical modeling

The mechanisms of speech production are complex and have been raising attention from researchers of both medical and computer vision fields. In the speech production mechanism, the articulator’s study is a complex issue, since they have a high level of freedom along this process, namely the tongue, which instigates a problem in its control and observation. In this work it is automatically characterized the tongues shape during the articulation of the oral vowels of Portuguese European by using statistical modeling on MR-images. A point distribution model is built from a set of images collected during artificially sustained articulations of Portuguese European sounds, which can extract the main characteristics of the motion of the tongue. The model built in this work allows under standing more clearly the dynamic speech events involved during sustained articulations. The tongue shape model built can also be useful for speech rehabilitation purposes, specifically to recognize the compensatory movements of the articulators during speech production.

Assessment of data-driven modeling strategies for water delivery canals

The aim of this paper is to develop models for experimental open-channel water delivery systems and assess the use of three data-driven modeling tools toward that end. Water delivery canals are nonlinear dynamical systems and thus should be modeled to meet given operational requirements while capturing all relevant dynamics, including transport delays. Typically, the derivation of first principle models for open-channel systems is based on the use of Saint-Venant equations for shallow water, which is a time-consuming task and demands for specific expertise. The present paper proposes and assesses the use of three data-driven modeling tools: artificial neural networks, composite local linear models and fuzzy systems. The canal from Hydraulics and Canal Control Nucleus (A parts per thousand vora University, Portugal) will be used as a benchmark: The models are identified using data collected from the experimental facility, and then their performances are assessed based on suitable validation criterion. The performance of all models is compared among each other and against the experimental data to show the effectiveness of such tools to capture all significant dynamics within the canal system and, therefore, provide accurate nonlinear models that can be used for simulation or control. The models are available upon request to the authors.

The invisible factors that can make the difference. Language management and knowledge transfer in multinational sites

The knowledge-based society we live in has stressed the importance of human capital and brought talent to the top of most wanted skills, especially to companies who want to succeed in turbulent environments worldwide. In fact, streams, sequences of decisions and resource commitments characterize the day-to-day of multinational companies (MNCs). Such decision-making activities encompass major strategic moves like internationalization and new market entries or diversification and acquisitions. In most companies, these strategic decisions are extensively discussed and debated and are generally framed, formulated, and articulated in specialized language often developed by the best minds in the company. Yet the language used in such deliberations, in detailing and enacting the implementation strategy is usually taken for granted and receives little if any explicit attention (Brannen & Doz, 2012) an can still be a “forgotten factor” (Marschan et al. 1997). Literature on language management and international business refers to lack of awareness of business managers of the impact that language can have not only in communication effectiveness but especially in knowledge transfer and knowledge management in business environments. In the context of MNCs, management is, for many different reasons, more complex and demanding than that of a national company, mainly because of diversity factors inherent to internationalization, namely geographical and cultural spaces, i.e, varied mindsets. Moreover, the way of functioning, and managing language, of the MNC depends on its vision, its values and its internationalization model, i.e on in the way the MNE adapts to and controls the new markets, which can vary essentially from a more ethnocentric to a more pluricentric focus. Regardless of the internationalization model followed by the MNC, communication between different business units is essential to achieve unity in diversity and business sustainability. For the business flow and prosperity, inter-subsidiary, intra-company and company-client (customers, suppliers, governments, municipalities, etc..) communication must work in various directions and levels of the organization. If not well managed, this diversity can be a barrier to global coordination and create turbulent environments, even if a good technological support is available (Feely et al., 2002: 4). According to Marchan-Piekkari (1999) the tongue can be both (i) a barrier, (ii) a facilitator and (iii) a source of power. Moreover, the lack of preparation for the barriers of linguistic diversity can lead to various costs, including negotiations’ failure and failure on internationalization.. On the other hand, communication and language fluency is not just a message transfer procedure, but above all a knowledge transfer process, which requires extra-linguistic skills (persuasion, assertiveness …) in order to promote credibility of both parties. For this reason, MNCs need a common code to communicate and trade information inside and outside the company, which will require one or more strategies, in order to overcome possible barriers and organization distortions.

Multimedia fate modeling and comparative impact on freshwater ecosystems of pharmaceuticals from biosolids-amended soils

This study modeled the impact on freshwater ecosystems of pharmaceuticals detected in biosolids following application on agricultural soils. The detected sulfonamides and hydrochlorothiazide displayed comparatively moderate retention in solid matrices and, therefore, higher transfer fractions from biosolids to the freshwater compartment. However, the residence times of these pharmaceuticals in freshwater were estimated to be short due to abiotic degradation processes. The non-steroidal anti-inflammatory mefenamic acid had the highest environmental impact on aquatic ecosystems and warrants further investigation. The estimation of the solid-water partitioning coefficient was generally the most influential parameter of the probabilistic comparative impact assessment. These results and the modeling approach used in this study serve to prioritize pharmaceuticals in the research effort to assess the risks and the environmental impacts on aquatic biota of these emerging pollutants.

A semantic approach for learning objects repositories with knowledge reuse

In this paper we discuss how the inclusion of semantic functionalities in a Learning Objects Repository allows a better characterization of the learning materials enclosed and improves their retrieval through the adoption of some query expansion strategies. Thus, we started to regard the use of ontologies to automatically suggest additional concepts when users are filling some metadata fields and add new terms to the ones initially provided when users specify the keywords with interest in a query. Dealing with different domain areas and having considered impractical the development of many different ontologies, we adopted some strategies for reusing ontologies in order to have the knowledge necessary in our institutional repository. In this paper we make a review of the area of knowledge reuse and discuss our approach.