Brain emotional learning based control of a SDOF structural system with a MR damper

This paper describes the application of a Brain Emotional Learning (BEL) controller to improve the response of a SDOF structural system under an earthquake excitation using a magnetorheological (MR) damper. The main goal is to study the performance of a BEL based semi-active control system to generate the control signal for a MR damper. The proposed approach consists of a two controllers: a primary controller based on a BEL algorithm that determines the desired damping force from the system response and a secondary controller that modifies the input current to the MR damper to generate a reference damping force. A parametric model of the damper is used to predict the damping force based on the piston motion and also the current input. A Simulink model of the structural system is developed to analyze the effectiveness of the semi-active controller. Finally, the numerical results are presented and discussed.

Motion Planning and Controls with Safety and Temporal Constraints

Motion planning, or trajectory planning, commonly refers to a process of converting high-level task specifications into low-level control commands that can be executed on the system of interest. For different applications, the system will be different. It can be an autonomous vehicle, an Unmanned Aerial Vehicle(UAV), a humanoid robot, or an industrial robotic arm. As human machine interaction is essential in many of these systems, safety is fundamental and crucial. Many of the applications also involve performing a task in an optimal manner within a given time constraint. Therefore, in this thesis, we focus on two aspects of the motion planning problem. One is the verification and synthesis of the safe controls for autonomous ground and air vehicles in collision avoidance scenarios. The other part focuses on the high-level planning for the autonomous vehicles with the timed temporal constraints. In the first aspect of our work, we first propose a verification method to prove the safety and robustness of a path planner and the path following controls based on reachable sets. We demonstrate the method on quadrotor and automobile applications. Secondly, we propose a reachable set based collision avoidance algorithm for UAVs. Instead of the traditional approaches of collision avoidance between trajectories, we propose a collision avoidance scheme based on reachable sets and tubes. We then formulate the problem as a convex optimization problem seeking control set design for the aircraft to avoid collision. We apply our approach to collision avoidance scenarios of quadrotors and fixed-wing aircraft. In the second aspect of our work, we address the high level planning problems with timed temporal logic constraints. Firstly, we present an optimization based method for path planning of a mobile robot subject to timed temporal constraints, in a dynamic environment. Temporal logic (TL) can address very complex task specifications such as safety, coverage, motion sequencing etc. We use metric temporal logic (MTL) to encode the task specifications with timing constraints. We then translate the MTL formulae into mixed integer linear constraints and solve the associated optimization problem using a mixed integer linear program solver. We have applied our approach on several case studies in complex dynamical environments subjected to timed temporal specifications. Secondly, we also present a timed automaton based method for planning under the given timed temporal logic specifications. We use metric interval temporal logic (MITL), a member of the MTL family, to represent the task specification, and provide a constructive way to generate a timed automaton and methods to look for accepting runs on the automaton to find an optimal motion (or path) sequence for the robot to complete the task.

Head repositioning accuracy in patients with neck pain and asymptomatic subjects: concurrent validity, influence of motion speed, motion direction and target distance

Background: Cervicocephalic kinesthetic deficiencies have been demonstrated in patients with chronic neck pain (NP). On the other hand, authors emphasized the use of different motion speeds for assessing functional impairment of the cervical spine. Purpose: The objectives of this study were (1) to investigate the head repositioning accuracy in NP patients and control subjects and (2) to assess the influence of target distance, motion speed, motion direction and pain. Materials and methods: Seventy-one subjects (36 healthy subjects and 35 NP patients; age 30–55 years) performed the head repositioning test (HRT) at two different speeds for horizontal and vertical movements and at two different distances. For each condition, six consecutive trials were sampled. Results: The study showed the validity and reproducibility of the HRT, confirming a dysfunctional threshold of 4.5°. Normative values of head repositioning error up to 3.6° and 7.1° were identified for healthy and NP subjects, respectively. A distance of 180 cm from the target and a natural motion speed increased HRT accuracy. Repositioning after extension movement showed a significantly larger error in both groups. Intensity, duration of pain as well as pain level did not significantly alter head repositioning error. Conclusions: The assessment of proprioceptive performance in healthy and NP subjects allowed the validation of the HRT. The HRT is a simple, not expensive and fast test, easily implementable in daily practice to assess and monitor treatment and evolution of proprioceptive cervical deficits.

Wave impedance selection for passivity-based bilateral teleoperation

When a task must be executed in a remote or dangerous environment, teleoperation systems may be employed to extend the influence of the human operator. In the case of manipulation tasks, haptic feedback of the forces experienced by the remote (slave) system is often highly useful in improving an operator's ability to perform effectively. In many of these cases (especially teleoperation over the internet and ground-to-space teleoperation), substantial communication latency exists in the control loop and has the strong tendency to cause instability of the system. The first viable solution to this problem in the literature was based on a scattering/wave transformation from transmission line theory. This wave transformation requires the designer to select a wave impedance parameter appropriate to the teleoperation system. It is widely recognized that a small value of wave impedance is well suited to free motion and a large value is preferable for contact tasks. Beyond this basic observation, however, very little guidance exists in the literature regarding the selection of an appropriate value. Moreover, prior research on impedance selection generally fails to account for the fact that in any realistic contact task there will simultaneously exist contact considerations (perpendicular to the surface of contact) and quasi-free-motion considerations (parallel to the surface of contact). The primary contribution of the present work is to introduce an approximate linearized optimum for the choice of wave impedance and to apply this quasi-optimal choice to the Cartesian reality of such a contact task, in which it cannot be expected that a given joint will be either perfectly normal to or perfectly parallel to the motion constraint. The proposed scheme selects a wave impedance matrix that is appropriate to the conditions encountered by the manipulator. This choice may be implemented as a static wave impedance value or as a time-varying choice updated according to the instantaneous conditions encountered. A Lyapunov-like analysis is presented demonstrating that time variation in wave impedance will not violate the passivity of the system. Experimental trials, both in simulation and on a haptic feedback device, are presented validating the technique. Consideration is also given to the case of an uncertain environment, in which an a priori impedance choice may not be possible.

A robust adaptive hybrid force/position control scheme of two planar manipulators handling an unknown object interacting with an environment

This paper presents a robust hybrid force/position control scheme of two cooperative manipulators handling an unknown object interacting with an unknown environment. The uncertainty of the object is considered in the weight, length, and the position of centre of mass (COM). The environment is assumed to have an unknown but high stiffness. A hybrid force/position control algorithm is designed for the known system and environment case. The exponential convergence of the position and the interaction force with the environment is proved using the Lyapunov direct method. Similarly, in the unknown object and environment case, and in the presence of bounded disturbances on the robots and the object, an adaptive sliding mode hybrid force/position control scheme is designed. The asymptotic convergence of the object's position and the constraint force is guaranteed using the proposed control methodology. The internal forces and moments between the object and robots are controlled independently of the object's motion and environmental interaction forces. Simulation results confirm the performance and effectiveness of the suggested control methodologies.

Spatial coordinated medium sharing: Optimal access control management in drive-thru internet

Driven by the ever-growing expectation of ubiquitous connectivity and the widespread adoption of IEEE 802.11 networks, it is not only highly demanded but also entirely possible for in-motion vehicles to establish convenient Internet access to roadside WiFi access points (APs) than ever before, which is referred to as Drive-Thru Internet. The performance of Drive-Thru Internet, however, would suffer from the high vehicle mobility, severe channel contentions, and instinct issues of the IEEE 802.11 MAC as it was originally designed for static scenarios. As an effort to address these problems, in this paper, we develop a unified analytical framework to evaluate the performance of Drive-Thru Internet, which can accommodate various vehicular traffic flow states, and to be compatible with IEEE 802.11a/b/g networks with a distributed coordination function (DCF). We first develop the mathematical analysis to evaluate the mean saturated throughput of vehicles and the transmitted data volume of a vehicle per drive-thru. We show that the throughput performance of Drive-Thru Internet can be enhanced by selecting an optimal transmission region within an AP's coverage for the coordinated medium sharing of all vehicles. We then develop a spatial access control management approach accordingly, which ensures the airtime fairness for medium sharing and boosts the throughput performance of Drive-Thru Internet in a practical, efficient, and distributed manner. Simulation results show that our optimal access control management approach can efficiently work in IEEE 802.11b and 802.11g networks. The maximal transmitted data volume per drive-thru can be enhanced by 113.1% and 59.5% for IEEE 802.11b and IEEE 802.11g networks with a DCF, respectively, compared with the normal IEEE 802.11 medium access with a DCF.

Navigating control and illusion: functional interactivity versus ‘faux-interactivity’ in transmedia dance performance

Interactivity – a networked loop in which a performer’s live data feeds a digital system – can bridge the divide between live performance and digital entities in transmedia dance performances. In the ‘entanglement scene’ of Australian Dance Theatre’s Multiverse (2014), choreographer Garry Stewart and the creative coders and animators at the Deakin Motion.Lab utilise ‘faux-interactivity’, or a perceived relationship between the dancers and digital entities that exists only from the perspective of the audience. The spectre of ‘faux-interactivity’ challenges the spontaneity in live, embodied performance art because it both integrates live performance with prerendered digital content and offers a potential structure for a shared, dispersed creative and choreographic process across numerous and shared artistic and technological platforms. This paper investigates the concept of ‘faux-interactivity’, suggesting that its use can be a catalyst for moving beyond the limitations and values of ‘real’, or functional interactive systems within a theatrical context, and positing that definitions of ‘interactivity’ might be further expanded to accommodate the shifting timelines inherent in the disparate creative processes of human performance and coding.

Predictive motion planning for AUVs subject to strong time-varying currents and forecasting uncertainties

This paper presents a novel path planning method for minimizing the energy consumption of an autonomous underwater vehicle subjected to time varying ocean disturbances and forecast model uncertainty. The algorithm determines 4-Dimensional path candidates using Nonlinear Robust Model Predictive Control (NRMPC) and solutions optimised using A∗-like algorithms. Vehicle performance limits are incorporated into the algorithm with disturbances represented as spatial and temporally varying ocean currents with a bounded uncertainty in their predictions. The proposed algorithm is demonstrated through simulations using a 4-Dimensional, spatially distributed time-series predictive ocean current model. Results show the combined NRMPC and A∗ approach is capable of generating energy-efficient paths which are resistant to both dynamic disturbances and ocean model uncertainty.

Advanced 4DT flight guidance and control software system

The work presented in this thesis has been part of a Cranfield University research project. This thesis aims to design a flight control law for large cargo aircraft by using predictive control, which can assure flight motion along the flight path exactly and on time. In particular this work involves the modelling of a Boeing C-17 Globemaster III 6DOF model (used as study case), by using DATCOM and Matlab Simulink software. Then a predictive control algorithm has been developed. The majority of the work is done in a Matlab/Simulink environment. Finally the predictive control algorithm has been applied on the aircraft model and its performances, in tracking given trajectory optimized through a 4DT Research Software, have been evaluated.

Optimizing time delay feedback for active vibration control of a cantilever beam using a genetic algorithm

Active vibration control using time delay for a cantilever beam is developed in this paper. The equation of motion of the system is developed using the discrete standard formulation, and the discrete quadratic function is used to design the controller. The original contribution in this paper is using a genetic algorithm to determine the optimal time delay feedback for active vibration control of a cantilever beam. Simulations of the beam demonstrated that the genetic algorithm correctly identified the time delay which produced the quickest attenuation of unwanted vibrations for both mode one and mode two. In terms of frequency response, the optimal time delay for both modes reduced the resonant amplitude. In a mixed mode situation, the simulation demonstrated that an optimal time delay could be identified.

A second order control-volume finite-element least-squares strategy for simulating diffusion in strongly anisotropic media

An unstructured mesh �nite volume discretisation method for simulating di�usion in anisotropic media in two-dimensional space is discussed. This technique is considered as an extension of the fully implicit hybrid control-volume �nite-element method and it retains the local continuity of the ux at the control volume faces. A least squares function recon- struction technique together with a new ux decomposition strategy is used to obtain an accurate ux approximation at the control volume face, ensuring that the overall accuracy of the spatial discretisation maintains second order. This paper highlights that the new technique coincides with the traditional shape function technique when the correction term is neglected and that it signi�cantly increases the accuracy of the previous linear scheme on coarse meshes when applied to media that exhibit very strong to extreme anisotropy ratios. It is concluded that the method can be used on both regular and irregular meshes, and appears independent of the mesh quality.