The effects of external and internal strikes on total factor productivity

This paper examines structural changes that occur in the total factor productivity (TFP) within countries. It is possible that some episodes of high economic growth or economic decline are associated with permanent productivity shocks, therefore, this research has two objectives. The Örst one is to estimate the structural changes present in TFP for a sample of 81 countries between 1950(60) and 2000. The second one is to identify, whenever possible, episodes in the political and economic history of these countries that may account for the structural breaks in question. The results suggest that about 85% of the TFP time-series present at least one structural break, moreover, at least half the structural changes can be attributed to internal factors, such as independence or a newly adopted constitution, and about 30% to external shocks, such as oil shock or shocks in international interest rates. The majority of the estimated breaks are downwards, indicating that after a break the TFP tends to decrease, implying that institutional rearrangements, external shocks, or internal shocks may be costly and from which it is very di¢ cult to recover.

Dual resource transfers and interruption in external debt service

Externai debt service requires a dual resource transfer. Trade surpluses have to be generated in order to make foreign exchange revenues available for debt repayment. In addition, with developing countries' externai debt being largely a public liability, debt service requires that resources can be effectively transferred from the private to the public sector. This paper derives a statistical model for dealing with dual constraints in the presence of binary dependent variables and applies it to the dual resource transfer problem. The results from the estimation of the model for a sample of 31 middle-income developing countries in the period of 1980 to 1990, strongly support the hypothesis that both externai and fiscal constraints are important in explaining externai debt service disruptions.

The challenges faced by the external audit industry in Brazil: an exploratory study

The auditing role in the contemporaneous business environment, and increasing interest in and demand for governance and transparency, has become an element even more important to the society, as a whole, in order to build solid basis to the development of businesses and generation of wealth through technical knowledge, independence, transparency, credibility, and ethics. Nevertheless, the external financial audit industry in the world and also particularly in Brazil has faced several challenges which threaten its success and evolution. In this sense, since the external audit industry in Brazil has been immersed in a deep crisis with features that are explored through this study, allow me to create an analogy over this study saying that the external financial audit industry is like a sick person with a chronic disease, but the disease has not yet been diagnosed and the person has been dealing with the isolated symptoms. This person, the external audit industry, has struggled with this disease for many years and it is getting worse. It is fundamental to highlight that the challenges faced by the external audit industry in Brazil, ultimately, have not harmed the industry only, but they also materialize themselves as chronic issues for the corporate governance and the capital markets since they harm every interested party. In my point of view, the hardest affected are the investors or shareholders whose interest the independent auditor’s work seeks to preserve. Therefore, the purpose of this study is to have a picture of the challenges faced by the external audit industry in Brazil and understand those challenges as a requirement to analyze the potential alternatives to solve them or, analogically, to diagnose this disease. The research purpose is to map and identify the challenges faced by the external audit industry in Brazil based on the understanding of professionals seasoned in the area. Those challenges are mapped and understood through a methodological approach, a questionnaire answered by auditors with experience in the Brazilian auditing market. The challenges were preliminarily listed based on over 16 years of experience of the author in the area of auditing and financial and accounting services, discussions and interviews about the topic with seasoned professionals, and analyses of pieces of news, publications and academic studies. The questionnaire was used in order to validate the challenges, observations, perspectives, and perceptions gathered through those resources. Despite of the fact that the study is highly relevant, it was not found, through my research, other analyses on this topic with a similar approach which is intended by this study. It looks like the external audit industry in Brazil has walked through these new age dealing with problems on a daily basis and the real challenges of the industry may be concealed by the economic conditions in Brazil and other explanations. As in any problematic scenario, in which a critical analysis is needed, having an accurate picture and understanding of the challenges is a crucial step to start exploring alternatives to address them.

How to manage macroeconomic policies to foster growth and employment and prevent financial and external crises

My presentation focuses on the implementation of a macroeconomic policy regime which, I believe, is capable of simultaneously attaining several targets, including the promotion of growth and employment and the prevention of external and financial crises.

Pose estimation of a humanoid robot using images from a mobile external camera

NOGUEIRA, Marcelo B. ; MEDEIROS, Adelardo A. D. ; ALSINA, Pablo J. Pose Estimation of a Humanoid Robot Using Images from an Mobile Extern Camera. In: IFAC WORKSHOP ON MULTIVEHICLE SYSTEMS, 2006, Salvador, BA. Anais... Salvador: MVS 2006, 2006.

Effect of cooling rate on properties of plasma nitrided AISI 1010 steel

In this work, AISI 1010 steel samples were plasma nitrided into 20% N 2 100 Pa and 400 Pa for N 2 and H 2 , respectively), temperatures of 500 and 580 °C, during 2 h. Three different procedures for cooling were accomplished after nitriding. In the first procedure the cooling occurred naturally, that is, the sample was kept on substrate holder. In the second one the sample was pulled off and cooling in a cold surface. Finally, in the third cooling process the sample was pulled off the substrate holder down into special reservoir filled with oil held at ambient temperature. The properties of the AISI 1010 steel samples were characterized by optical and electron microscopy, X-ray diffraction, Mössbauer spectroscopy and microhardness tests. Thermal gradient inside the sample kept on substrate holder during cooling process was measured by three inserted thermocouples at different depths. When samples were cooled rapidly the transformation of ϵ-Fe 2 − 3 N to γ′-Fe 4 N was inhibited. Such effect is indicated by the high concentration of ϵ-Fe compound zone. To get solid state solution of nitrogen in the diffusion zone, instead of precipitates of nitride phases, the cooling rate should be higher than a critical value of about 0.95 °C/s. When this value is reached at any depth of the diffusion zone, two distinct diffusion zones will appear. Temperature gradients were measured inside the samples as a consequence of the plasma treatment. It's suggested the need for standardization of the term “treatment temperature” for plasma treatment because different nitrided layer properties could be reported for the same “treatment temperature”.

Influência na qualidade final de metais retificados através da variação da velocidade de mergulho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Orientation and external morphology of burrows of the mangrove crab Ucides cordatus (Crustacea: Brachyura: Ucididae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

External Morphology of the Immatures of Polybia paulista (Hymenoptera: Vespidae)

The immatures of Polybia paulista Ihering were described using light and scanning electron microscopy and the results are compared with previous descriptions within the same or related wasps. This study is based on 2 whole nests collected in the municipality of Rio Claro, São Paulo, in Brazil. We have detected the existence of 5 larval instars. The main morphological alterations over development occur in the relative size of structures, yet certain structures appear with subsequent instars and become more evident later in development: increasing density in the number of body spines and papillae; the appearance of body setae in fifth-instar larvae; opening of spiracles upon second-instar larvae; 2 body shapes in fifth-instar larvae; the appearance of a lateral tooth on the mandibles of fourth instar; presence of spines on the maxillae of fifth-instar larvae; altered shape of galea and palps upon third-instar larvae from a cluster of sensilla to a conical elevation; and the appearance of spines on postmentum upon fourth-instar larvae. This way, the present study presents a detailed description of the immatures of P. paulista, and we hope the presented information can be useful to morphological, taxonomic, and phylogenetic studies.

Simulação da transferência de calor em amostras aquecidas por plasma

The processing of materials through plasma has been growing enough in the last times in several technological applications, more specifically in surfaces treatment. That growth is due, mainly, to the great applicability of plasmas as energy source, where it assumes behavior thermal, chemical and/or physical. On the other hand, the multiplicity of simultaneous physical effects (thermal, chemical and physical interactions) present in plasmas increases the complexity for understanding their interaction with solids. In that sense, as an initial step for the development of that subject, the present work treats of the computational simulation of the heating and cooling processes of steel and copper samples immersed in a plasma atmosphere, by considering two experimental geometric configurations: hollow and plane cathode. In order to reach such goal, three computational models were developed in Fortran 90 language: an one-dimensional transient model (1D, t), a two-dimensional transient model (2D, t) and a two-dimensional transient model (2D, t) which take into account the presence of a sample holder in the experimental assembly. The models were developed based on the finite volume method and, for the two-dimensional configurations, the effect of hollow cathode on the sample was considered as a lateral external heat source. The main results obtained with the three computational models, as temperature distribution and thermal gradients in the samples and in the holder, were compared with those developed by the Laboratory of Plasma, LabPlasma/UFRN, and with experiments available in the literature. The behavior showed indicates the validity of the developed codes and illustrate the need of the use of such computational tool in that process type, due to the great easiness of obtaining thermal information of interest

Influence of the Lipophilic External Phase Composition on the Preparation and Characterization of Xylan Microcapsules-A Technical Note

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Metal-insulator transition in Nd1-x Eu-x NiO3 probed by specific heat and anelastic measurements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Framework for analysis and representation of external systems for online reactive-optimisation studies

The paper proposes a framework for the analysis and representation of external systems for online optimisation studies. The basis for this framework is the equivalent OPF (EOPF), an optimisation model obtained by partitioning of the OPF model. The EOPF is mathematically redefined in the paper to accommodate the concept of a buffer zone. The resulting model is more useful for online optimisation, since external information obtained through intercontrol-centre exchange contracts can be used to improve internal control calculation. Numerical results obtained with original studies involving the boundary-matching procedure have provided a conceptual basis for the definition of a buffer zone for optimisation studies with the EOPF. In the proposed framework, the accuracy of the external representation in optimisation studies is evaluated by comparing the controls obtained by an EOPF procedure with those obtained by the reference-optimisation procedure defined in this paper. The framework is then used to evaluate the accuracy of equivalent optimisation studies involving the IEEE 118-bus test system and the Brazilian South Southeast 810-bus system. The results show that the incorporation of a buffer zone improves the external system representation for all optimisation studies performed.