Analysis and comparison of network performance with different network parameters

The purpose of this study was to analyze the network performance by observing the effect of varying network size and data link rate on one of the most commonly found network configurations. Computer networks have been growing explosively. Networking is used in every aspect of business, including advertising, production, shipping, planning, billing, and accounting. Communication takes place through networks that form the basis of transfer of information. The number and type of components may vary from network to network depending on several factors such as requirement and actual physical placement of the networks. There is no fixed size of the networks and they can be very small consisting of say five to six nodes or very large consisting of over two thousand nodes. The varying network sizes make it very important to study the network performance so as to be able to predict the functioning and the suitability of the network. The findings demonstrated that the network performance parameters such as global delay, load, router processor utilization, router processor delay, etc. are affected. The findings demonstrated that the network performance parameters such as global delay, load, router processor utilization, router processor delay, etc. are affected significantly due to the increase in the size of the network and that there exists a correlation between the various parameters and the size of the network. These variations are not only dependent on the magnitude of the change in the actual physical area of the network but also on the data link rate used to connect the various components of the network.

Comparison of parental perception and therapist interpretation of child's performance of the Peabody Fine Motor Scale

Public Law 102-119 (Individuals with Disabilities Education Act of 1991), mandates that family members, if they wish, participate in developing a plan of treatment for their child. Traditionally, therapist have not relied on parental assessments based upon the assumption that parents overestimate their child's abilities. The present study compared parental perceptions about the developmental status of their child's fine motor abilities to the therapist's interpretation of a standardized assessment using the Peabody Developmental Motor Scale (Fine Motor). Thirty seven children, enrolled in an early intervention program, and their parents were recruited for the study. The results indicated that the parents and the therapist estimates were highly correlated and showed no significant differences when paired t-tests were computed for developmental ages and scaled scores. However, analyses of variances were significantly correlated for gender and number of siblings.

Rater's personality as a moderator of context effects in performance appraisals

Undergraduates rated scripts describing the performance of different instructors in the following order: two positive or negative scripts followed by an average script; or two average scripts followed by a positive or a negative script. Context effects were assessed by comparing ratings of the target stimulus in the context and in the context-free control conditions. Several individual difference variables were measured as possible moderators of this phenomenon. Results indicated robust contrast effects mediated by beliefs in the variability of human nature in the extreme context conditions. In the positive context condition, high scorers in Variability were not affected by context, whereas medium or low scorers in Variability exhibited contrast effects. In the negative context condition, high scorers in Variability exhibited a more extreme contrast effect than medium or low scorers in Variability. In the average context conditions, contrast was observed only when the target was positive.

Improving performance of a permeable reactive barrier in the degradation of trichloroethylene using ultrasound

The impact of ultrasound on improving the performance of a granular iron Permeable Reactive Barrier (PRB) in the degradation of Trichloroethylene (TCE) was evaluated. Two treatment columns made of clear Plexiglas with a height of 1ft and a diameter of 2 inches and filled with granular iron were used. One was fitted with 25Khz ultrasound probes. A solution of TCE was run through at constant flow rate. Samples obtained from the column at different residence times before and after sonication were analyzed for concentrations of TCE and used to generate concentration profiles to obtain rate constants, which were compared. An improvement of 23.4% in the reaction rate of TCE degradation was observed after sonication of the iron media suggesting that ultrasound may contribute to improving the performance of PRBs in the degradation of TCE in contaminated groundwater.

Environmental analysis of polar herbicides in complex organic-rich matrices by high performance liquid chromatography atmospheric pressure ionization mass spectrometry (HPLC-API-MS)

A comprehensive forensic investigation of sensitive ecosystems in the Everglades Area is presented. Assessing the background levels of contamination in these ecosystems represents a vital resource to build up forensic evidence required to enforce future environmental crimes within the studied areas. This investigation presents the development and validation of a fractionation and isolation method for two families of herbicides commonly applied in the vicinity of the study area, including phenoxy acids like 2,4-D, MCPA, and silvex; as well as the most common triazine-based herbicides like atrazine, prometyne, simazine and related metabolites like DIA and DEA. Accelerated solvent extraction (ASE) and solid phase extraction (SPE) were used to isolate the analytes from abiotic matrices containing large amounts of organic material. Atmospheric-pressure ionization (API) with electrospray ionization in negative mode (ESP-), and Chemical Ionization in the positive mode (APCI+) were used to perform the characterization of the herbicides of interest.

Metrópole digital: o jovem aprendiz na educação tecnológica

This thesis was elaborated in the scenario of Digital Metropolis Institute (IMD) – a supplementary unit at the Federal University of Rio Grande do Norte in the training of personnel with technical and higher level courses whose technical level training is associated with a process of digital inclusion, with the purpose of attracting young people to this area, with emphasis on Software and Hardware Development. It aims to investigate the cognitive change of young apprentice on technological education and his/her entrance into the labor market, through the formation and the social inclusion proposed by the Instituto Metrópole Digital; understanding the juvenile subjectivity production through the Instituto Metrópole Digital’s education by performance in the labor market; recognizing the Brazilian professional qualification public policies for youth and identifying the role of Tutoring in the learning process during the course of formation of the young apprentice of the technological education proposed by the Instituto Metrópole Digital.The clipping of the object of investigation was the process of cognitive change and constitution of subjectivity of the young apprentice in information technology (IT) in the IMD. It was searched support in theory Freireana as proposal that problematizes the policies and the process of formation and professional qualification, in the perspective of a citizen and liberating consciousness. By qualitative and ethnographic nature, descriptive-explanatory, it counts with the participation of young people, high school students from public and private schools, aged between 15 and 18 years. There are strong aspects: a cognitive change on the young apprentice of technological education onto overdrive high school as the student of the Instituto Metrópole Digital; it happened the social integration for those who remain in the course, both in the neighborhood where they reside and at school where he attended high school, the young man is recognized and becomes reference to other young, favoring him a life projection which when the activities of mentoring is learning motivator, it exerts a positive influence to the young on the continuity of studies, it provides intellectual and institutional affiliation and continuity in the investments to the academic life for a better insertion in the labor market, which refers to the modification of the life project-invest in academic training, in exchange for a technical job in the labor market. There are weak aspects: the absence of professor in the course, in his most important role, which involves awareness of his/her condition in action, in explicit position that the professional practice constitutes as this constitution requires reciprocity of its students and the context in which it operates; fragile formation of mentoring, absence of dialogues in the classroom that favors the formation of subject learning, mainly in guiding action, mediator of the young; There is a lack of methodological proposal to develop real projects on the labor market with problem solving and collaborative learning. It considers that without converting information into knowledge cannot discern clearly enough that there is no direct causal relationship between Professional and technological Education and the level of employability of the young worker certificate. It suggests to the evasion: a greater knowledge of the reality of the student of the Institute Metropolis Digital; better knowledge of youth and their expectations of life project; the Tutoring will be Teacher-tutor; investing in employability conditions effective the young into the labor market.

Comparative performance between two photogrammetric systems and a reference laser tracker network for large-volume industrial measurement

This paper determines the capability of two photogrammetric systems in terms of their measurement uncertainty in an industrial context. The first system – V-STARS inca3 from Geodetic Systems Inc. – is a commercially available measurement solution. The second system comprises an off-the-shelf Nikon D700 digital camera fitted with a 28 mm Nikkor lens and the research-based Vision Measurement Software (VMS). The uncertainty estimate of these two systems is determined with reference to a calibrated constellation of points determined by a Leica AT401 laser tracker. The calibrated points have an average associated standard uncertainty of 12·4 μm, spanning a maximum distance of approximately 14·5 m. Subsequently, the two systems’ uncertainty was determined. V-STARS inca3 had an estimated standard uncertainty of 43·1 μm, thus outperforming its manufacturer's specification; the D700/VMS combination achieved a standard uncertainty of 187 μm.

The Validity of Broad and Narrow Personality Traits For Predicting Job Performance: The Differential Effects of Time

Research into the dynamicity of job performance criteria has found evidence suggesting the presence of rank-order changes to job performance scores across time as well as intraindividual trajectories in job performance scores across time. These findings have influenced a large body of research into (a) the dynamicity of validities of individual differences predictors of job performance and (b) the relationship between individual differences predictors of job performance and intraindividual trajectories of job performance. In the present dissertation, I addressed these issues within the context of the Five Factor Model of personality. The Five Factor Model is arranged hierarchically, with five broad higher-order factors subsuming a number of more narrowly tailored personality facets. Research has debated the relative merits of broad versus narrow traits for predicting job performance, but the entire body of research has addressed the issue from a static perspective -- by examining the relative magnitude of validities of global factors versus their facets. While research along these lines has been enlightening, theoretical perspectives suggest that the validities of global factors versus their facets may differ in their stability across time. Thus, research is needed to not only compare the relative magnitude of validities of global factors versus their facets at a single point in time, but also to compare the relative stability of validities of global factors versus their facets across time. Also necessary to advance cumulative knowledge concerning intraindividual performance trajectories is research into broad vs. narrow traits for predicting such trajectories. In the present dissertation, I addressed these issues using a four-year longitudinal design. The results indicated that the validities of global conscientiousness were stable across time, while the validities of conscientiousness facets were more likely to fluctuate. However, the validities of emotional stability and extraversion facets were no more likely to fluctuate across time than those of the factors. Finally, while some personality factors and facets predicted performance intercepts (i.e., performance at the first measurement occasion), my results failed to indicate a significant effect of any personality variable on performance growth. Implications for research and practice are discussed.

Effect of Performance Feedback on Perceived Knowledge and Likelihood to Pursue Continuing Education

The purpose of this study was to assess the effect of performance feedback on Athletic Trainers’ (ATs) perceived knowledge (PK) and likelihood to pursue continuing education (CE). The investigation was grounded in the theories of “the definition of the situation” (Thomas & Thomas, 1928) and the “illusion of knowing,” (Glenberg, Wilkinson, & Epstein, 1982) suggesting that PK drives behavior. This investigation measured the degree to which knowledge gap predicted CE seeking behavior by providing performance feedback designed to change PK. A pre-test post-test control-group design was used to measure PK and likelihood to pursue CE before and after assessing actual knowledge. ATs (n=103) were randomly sampled and assigned to two groups, with and without performance feedback. Two independent samples t-tests were used to compare groups on the difference scores of the dependent variables. Likelihood to pursue CE was predicted by three variables using multiple linear regression: perceived knowledge, pre-test likelihood to pursue CE, and knowledge gap. There was a 68.4% significant difference (t101= 2.72, p=0.01, ES=0.45) between groups in the change scores for likelihood to pursue CE because of the performance feedback (Experimental group=13.7% increase; Control group= 4.3% increase). The strongest relationship among the dependent variables was between pre-test and post-test measures of likelihood to pursue CE (F2,102=56.80, p<0.01, r=0.73, R2=0.53). The pre- and post-test predictive relationship was enhanced when group was included in the model. In this model [YCEpost=0.76XCEpre-0.34 Xgroup+2.24+E], group accounted for a significant amount of unique variance in predicting CE while the pre-test likelihood to pursue CE variable was held constant (F3,102=40.28, p<0.01,: r=0.74, R2=0.55). Pre-test knowledge gap, regardless of group allocation, was a linear predictor of the likelihood to pursue CE (F1,102=10.90, p=.01, r=.31, R2=.10). In this investigation, performance feedback significantly increased participants’ likelihood to pursue CE. Pre-test knowledge gap was a significant predictor of likelihood to pursue CE, regardless if performance feedback was provided. ATs may have self-assessed and engaged in internal feedback as a result of their test-taking experience. These findings indicate that feedback, both internal and external, may be necessary to trigger CE seeking behavior.

A Capability Maturity Model to Assess Supply Chain Performance

In an overcapacity world, where the customers can choose from many similar products to satisfy their needs, enterprises are looking for new approaches and tools that can help them not only to maintain, but also to increase their competitive edge. Innovation, flexibility, quality, and service excellence are required to, at the very least, survive the on-going transition that industry is experiencing from mass production to mass customization. In order to help these enterprises, this research develops a Supply Chain Capability Maturity Model named S(CM)2. The Supply Chain Capability Maturity Model is intended to model, analyze, and improve the supply chain management operations of an enterprise. The Supply Chain Capability Maturity Model provides a clear roadmap for enterprise improvement, covering multiple views and abstraction levels of the supply chain, and provides tools to aid the firm in making improvements. The principal research tool applied is the Delphi method, which systematically gathered the knowledge and experience of eighty eight experts in Mexico. The model is validated using a case study and interviews with experts in supply chain management. The resulting contribution is a holistic model of the supply chain integrating multiple perspectives, and providing a systematic procedure for the improvement of a company’s supply chain operations.

Seismic Performance of Hybrid Fiber Reinforced Polymer-Concrete Pier Frame Systems

As an alternative to transverse spiral or hoop steel reinforcement, fiber reinforced polymers (FRPs) were introduced to the construction industry in the 1980's. The concept of concrete-filled FRP tube (CFFT) has raised great interest amongst researchers in the last decade. FRP tube can act as a pour form, protective jacket, and shear and flexural reinforcement for concrete. However, seismic performance of CFFT bridge substructure has not yet been fully investigated. Experimental work in this study included four two-column bent tests, several component tests and coupon tests. Four 1/6-scale bridge pier frames, consisting of a control reinforced concrete frame (RCF), glass FRP-concrete frame (GFF), carbon FRP-concrete frame (CFF), and hybrid glass/carbon FRP-concrete frame (HFF) were tested under reverse cyclic lateral loading with constant axial loads. Specimen GFF did not show any sign of cracking at a drift ratio as high as 15% with considerable loading capacity, whereas Specimen CFF showed that lowest ductility with similar load capacity as in Specimen GFF. FRP-concrete columns and pier cap beams were then cut from the pier frame specimens, and were tested again in three point flexure under monotonic loading with no axial load. The tests indicated that bonding between FRP and concrete and yielding of steel both affect the flexural strength and ductility of the components. The coupon tests were carried out to establish the tensile strength and elastic modulus of each FRP tube and the FRP mold for the pier cap beam in the two principle directions of loading. A nonlinear analytical model was developed to predict the load-deflection responses of the pier frames. The model was validated against test results. Subsequently, a parametric study was conducted with variables such as frame height to span ratio, steel reinforcement ratio, FRP tube thickness, axial force, and compressive strength of concrete. A typical bridge was also simulated under three different ground acceleration records and damping ratios. Based on the analytical damage index, the RCF bridge was most severely damaged, whereas the GFF bridge only suffered minor repairable damages. Damping ratio was shown to have a pronounced effect on FRP-concrete bridges, just the same as in conventional bridges. This research was part of a multi-university project, which is founded by the National Science Foundation (NSF) Network for Earthquake Engineering Simulation Research (NEESR) program.

Digital geometric-sequence control technique for bidirectional dual active bridge DC-DC converters used in future electric vehicles

Bidirectional DC-DC converters are widely used in different applications such as energy storage systems, Electric Vehicles (EVs), UPS, etc. In particular, future EVs require bidirectional power flow in order to integrate energy storage units into smart grids. These bidirectional power converters provide Grid to Vehicle (V2G)/ Vehicle to Grid (G2V) power flow capability for future EVs. Generally, there are two control loops used for bidirectional DC-DC converters: The inner current loop and The outer loop. The control of DAB converters used in EVs are proved to be challenging due to the wide range of operating conditions and non-linear behavior of the converter. In this thesis, the precise mathematical model of the converter is derived and non-linear control schemes are proposed for the control system of bidirectional DC-DC converters based on the derived model. The proposed inner current control technique is developed based on a novel Geometric-Sequence Control (GSC) approach. The proposed control technique offers significantly improved performance as compared to one for conventional control approaches. The proposed technique utilizes a simple control algorithm which saves on the computational resources. Therefore, it has higher reliability, which is essential in this application. Although, the proposed control technique is based on the mathematical model of the converter, its robustness against parameter uncertainties is proven. Three different control modes for charging the traction batteries in EVs are investigated in this thesis: the voltage mode control, the current mode control, and the power mode control. The outer loop control is determined by each of the three control modes. The structure of the outer control loop provides the current reference for the inner current loop. Comprehensive computer simulations have been conducted in order to evaluate the performance of the proposed control methods. In addition, the proposed control have been verified on a 3.3 kW experimental prototype. Simulation and experimental results show the superior performance of the proposed control techniques over the conventional ones.

Digital anthropology and educational eGames: learning through behavioural patterns in digital, game-based contexts

The selected publications are focused on the relations between users, eGames and the educational context, and how they interact together, so that both learning and user performance are improved through feedback provision. A key part of this analysis is the identification of behavioural, anthropological patterns, so that users can be clustered based on their actions, and the steps taken in the system (e.g. social network, online community, or virtual campus). In doing so, we can analyse large data sets of information made by a broad user sample,which will provide more accurate statistical reports and readings. Furthermore, this research is focused on how users can be clustered based on individual and group behaviour, so that a personalized support through feedback is provided, and the personal learning process is improved as well as the group interaction. We take inputs from every person and from the group they belong to, cluster the contributions, find behavioural patterns and provide personalized feedback to the individual and the group, based on personal and group findings. And we do all this in the context of educational games integrated in learning communities and learning management systems. To carry out this research we design a set of research questions along the 10-year published work presented in this thesis. We ask if the users can be clustered together based on the inputs provided by them and their groups; if and how these data are useful to improve the learner performance and the group interaction; if and how feedback becomes a useful tool for such pedagogical goal; if and how eGames become a powerful context to deploy the pedagogical methodology and the various research methods and activities that make use of that feedback to encourage learning and interaction; if and how a game design and a learning design must be defined and implemented to achieve these objectives, and to facilitate the productive authoring and integration of eGames in pedagogical contexts and frameworks. We conclude that educational games are a resourceful tool to provide a user experience towards a better personalized learning performance and an enhance group interaction along the way. To do so, eGames, while integrated in an educational context, must follow a specific set of user and technical requirements, so that the playful context supports the pedagogical model underneath. We also conclude that, while playing, users can be clustered based on their personal behaviour and interaction with others, thanks to the pattern identification. Based on this information, a set of recommendations are provided Digital Anthropology and educational eGames 6 /216 to the user and the group in the form of personalized feedback, timely managed for an optimum impact on learning performance and group interaction level. In this research, Digital Anthropology is introduced as a concept at a late stage to provide a backbone across various academic fields including: Social Science, Cognitive Science, Behavioural Science, Educational games and, of course, Technology-enhance learning. Although just recently described as an evolution of traditional anthropology, this approach to digital behaviour and social structure facilitates the understanding amongst fields and a comprehensive view towards a combined approach. This research takes forward the already existing work and published research onusers and eGames for learning, and turns the focus onto the next step — the clustering of users based on their behaviour and offering proper, personalized feedback to the user based on that clustering, rather than just on isolated inputs from every user. Indeed, this pattern recognition in the described context of eGames in educational contexts, and towards the presented aim of personalized counselling to the user and the group through feedback, is something that has not been accomplished before.

Capturing and indexing rehearsals: the design and usage of a digital archive of performing arts

Preserving the cultural heritage of the performing arts raises difficult and sensitive issues, as each performance is unique by nature and the juxtaposition between the performers and the audience cannot be easily recorded. In this paper, we report on an experimental research project to preserve another aspect of the performing arts—the history of their rehearsals. We have specifically designed non-intrusive video recording and on-site documentation techniques to make this process transparent to the creative crew, and have developed a complete workflow to publish the recorded video data and their corresponding meta-data online as Open Data using state-of-the-art audio and video processing to maximize non-linear navigation and hypervideo linking. The resulting open archive is made publicly available to researchers and amateurs alike and offers a unique account of the inner workings of the worlds of theater and opera.

Digital predistortion for compensation of nonlinearities in Radio over Fiber Links

In order to cope up with the ever increasing demand for larger transmission bandwidth, Radio over Fiber technology is a very beneficial solution. These systems are expected to play a major role within future fifth generation wireless networks due to their inherent capillary distribution properties. Nonlinear compensation techniques are becoming increasingly important to improve the performance of telecommunication channels by compensating for channel nonlinearities. Indeed, significant bounds on the technology usability and performance degradation occur due to nonlinear characteristics of optical transmitter, nonlinear generation of spurious frequencies, which, in the case of RoF links exploiting Directly Modulated Lasers , has the combined effect of laser chirp and optical fiber dispersion among its prevailing causes. The purpose of the research is to analyze some of the main causes of harmonic and intermodulation distortion present in Radio over Fiber (RoF) links, and to suggest a solution to reduce their effects, through a digital predistortion technique. Predistortion is an effective and interesting solution to linearize and this allows to demonstrate that the laser’s chirp and the optical fiber’s dispersion are the main causes which generate harmonic distortion. The improvements illustrated are only theoretical, based on a feasibility point of view. The simulations performed lead to significant improvements for short and long distances of radio over fiber link lengths. The algorithm utilized for simulation has been implemented on MATLAB. The effects of chirp and fiber nonlinearity in a directly modulated fiber transmission system are investigated by simulation, and a cost effective and rather simple technique for compensating these effects is discussed. A detailed description of its functional model is given, and its attractive features both in terms of quality improvement of the received signal, and cost effectiveness of the system are illustrated.