Caracterização termo-mecânica de interconectores metálicos recobertos com filmes de LaCrO3

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Diagnóstico da possível influência da atividade petrolífera em sedimentos de fundo da Bacia Piranhas-Açu, região Baixo Açu/RN

It is located in an area of increasing oil exploration, the region of the Lower Açu is at the mercy of a possible pollution generated by this economic activity, which includes various chemical substances harmful to health, such as metals. This thesis aims to, diagnose the areas of River Piranhas-Açu, a region of the Lower Açu, which are polluted by traces factors and more. In this study, it was determined the concentration of the chemica elements Al, CD, Cr, Cu, Fe, Mn, Ni, P, Pb, V and Zn, through the technique of ICP-OES analysis and the size of sediments and their contents organic matter. Were mapped by GPS, 12 points from collections. The interpretations of the results, together associating that allowed pollution to a possible contamination by oil activity. The results showed tha some regions have low concentrations of cadmium, lead, copper, manganese and zinc unable to promote damage to human health. However, there are places where the concentrations of certain metals chromium, iron and zinc are moderately polluted compared to the results with the reference values of literature and others that are highly polluted by iron. However, due to a greater number of wells in production in those locations, those higher concentrations, it can be suggested a possible influence of oi production in some areas with concentrations of chromium and lead are higher than the rest of the points of monitoring. Moreover, it is observed that the highest levels of metals found in sediment of finer texture and more organic matter content

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Biosorption of Cr(III) using in natura and chemically treated tropical peats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Testes físico-mecânicos e físico-químicos do couro da tilápia vermelha

Realizaram-se testes físico-mecânicos e físico-químicos em couro de tilápia vermelha (Oreochromis spp.) a fim de testar a sua resistência. As amostras foram distribuídas em delineamento inteiramente ao acaso com dois tratamentos: no T1, procedeu-se à retirada do corpo-de-prova no sentido longitudinal e, no T2, à retirada do corpo-de-prova no sentido transversal. Para os testes de determinação da resistência à tração, alongamento e rasgamento progressivo, foi utilizado o dinamômetro EMIC, com velocidade de afastamento entre as cargas de 100 ± 20mm/min, em ambiente climatizado (± 23ºC e UR do ar de 50%), por 24 horas. A espessura do couro variou de 0,61 a 0,75mm, mas não houve diferença entre os sentidos analisados. O couro apresentou maior resistência à tração no sentido transversal, 25,89N/mm², (P<0,01), comparado ao sentido longitudinal, 14,20 N/mm². O alongamento foi significativamente (P<0,05) maior no sentido longitudinal, 80,8%, em relação ao transversal, 62,6%. Não houve diferença para o rasgamento progressivo entre os tratamentos. O couro apresentou teor de óxido de cromo de 3,8%, graxa de 15,1% e pH e cifra diferencial de 3,5 e 0,5, respectivamente. Os valores nos testes de resistência e físico-químicos apresentados pelo couro indicam que ele pode ser utilizado para a confecção de vestuário e artefatos de couro em geral.

Chromic oxide as a digestibility marker for dogs - A comparison of methods of analysis

The study reported compared coefficients of apparent digestibility (CAD) obtained by total collection (TC) and by chromic oxide (Cr2O3) determined by visible absorption spectrometry (VIS) and flame atomic absorption spectrophotometry (FAAS). These quantification methods were also investigated to assess their precision. Nineteen adult dogs housed in individual digestibility cages were fed three commercial diets, each test including five or seven animals. The experiment was carried out in a completely randomized design with three among-subjects factors (foods) and three within-subject factors (methods), and the dogs were the experimental unit. Estimated CAD for all dietary components in the three diets by either chromium quantification methods did not differ and showed fair agreement with TC results (P > 0.05). Coefficients of chromic oxide recoveries in feces were 1.06 +/- 0.044 and 1.01 +/- 0.045 for VIS and FAAS, respectively, values significantly different (P < 0.05), indicating better recovery for FAAS. Significant differences (P<0.05) were found in the mean concentration of Cr2O3 for diets and feces (17 +/- 0.6 and 19 +/- 0.8g/kg for VIS and FAAS, respectively). Coefficient of variation for FAAS was 1.69% and 1.77% for VIS, which did not differ significantly (P > 0.05). Pearson's correlation coefficient (r=0.99; P < 0.01) indicated positive and significant association among the results for VIS and FASS, indicating reasonable precision and agreement of chromic oxide contents determined by these methods. Therefore, FAAS and VIS can be used successfully to determine Cr2O3 in dog foods and feces. (c) 2006 Elsevier B.V. All rights reserved.

Efeito da técnica de curtimento e do método utilizado para remoção da pele da tilápia-do-nilo sobre as características de resistência do couro

Um estudo foi realizado com o objetivo de avaliar os efeitos do método de remoção da pele do filé (com alicate e com máquina) e da técnica de curtimento (com ou sem sais de cromo, bioleather) sobre a resistência da pele de tilápia-do-nilo (Oreochromis niloticus). Foram retiradas as peles de 40 tilápias (450 g), 20 com uso de alicates e 20 com auxílio de máquina. Após o curtimento e a retirada dos corpos-de-prova, as peles foram encaminhadas a um laboratório aclimatizado (23ºC e 50% de umidade relativa do ar) para realização dos testes de resistência em dinamômetro EMIC, com velocidade de afastamento entre cargas de 100 ± 20 mm/mm. O método de retirada da pele do filé não afetou os resultados dos testes de tração e rasgamento progressivo. A pele retirada com a máquina apresentou elongação superior (88,48%) à removida com alicate (71,09%). Peles curtidas com sais de cromo (25,54 N/mm; 12,18 N/mm²) foram mais resistentes que as curtidas sem sais de cromo (bioleather) (13,11 N/mm; 9,89 N/mm²). Peles curtidas por estas técnicas (com cromo e bioleather) podem ser utilizadas na confecção de vestuários, pois as médias dos testes de tração, alongamento e rasgamento progressivo foram superiores a 9,80 N/mm², 60% e 14,72 N/mm, respectivamente, valores mínimos recomendados para couros curtidos ao cromo.

Características produtivas e imunológicas de frangos de corte submetidos a dietas suplementadas com cromo, criados sob diferentes condições de ambiente

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise de efluente e histologia da pele, fígado e rim de Pacus (Piaractus mesopotamicus) suplementados com cromo trivalente

The objective of this work was to evaluate the skin, liver and kidney histology of young pacus supplemented in diet with trivalent chromium and to evaluate the residue of chromium in water effluent. Randomised delineation by using factorial scheme 4x2, with four levels of chromium (0, 6, 12, 18 mg/L), two stocking densities (4 and 20 kg/m(3)), and four repetitions were used. Pacus with 100 g were used, for 90 days. An increase of the number of mucus cells and club cells in the epidermis of the pacus supplemented with 18 chromium mg/kg was observed in any stocking density. The same effect was observed in the liver, and in the highest density (20 kg/m(3)) the alterations already occurred at the level of 6 mg/kg with the inclusion of chromium, initially with congestion of sinusoids and getting worse at the level of 18 mg/kg with necrosis. The kidney didn't present visible morphologic alterations when supplemented and submitted to the stocking densities. The concentration of chromium in the effluent of pacus was 3.27 mu g/L in the higher level of supplementation (18 mg/L). In conclusion the level of 18 supplement mg/kg was not shown beneficial to the growth of pacus and the stocking density, due to the possible stress, accelerated the alteration histology process of tissues.

Efeitos da aplicação da escória de siderurgia ferrocromo no solo, no estado nutricional e na produção de matéria seca de mudas de maracujazeiro

A escória de siderurgia ferrocromo pode-se constituir em uma fonte alternativa de Ca e Mg, bem como em corretivo da acidez do solo, melhorando a sua fertilidade e o estado nutricional de culturas. Assim, objetivou-se avaliar os efeitos da escória de siderurgia ferrocromo nas alterações dos atributos químicos do solo, na nutrição e no desenvolvimento de mudas de maracujazeiro. Para tanto, instalou-se um experimento em condições de casa de vegetação, empregando-se as seguintes doses crescentes da escória: zero; metade; uma vez; uma vez e meia e duas vezes a dose para elevar a saturação por bases do solo a 80%, correspondendo às doses de: 0; 0,375; 0,750; 1,125 e 1,500 g dm-3, respectivamente. O substrato utilizado foi um Latossolo Vermelho distrófico, ácido (vasos com 2,8 dm³), que foi incubado com a escória de siderurgia, por 30 dias, para posterior semeadura do maracujazeiro, cultivando-as por 85 dias. A aplicação da escória de siderurgia ferrocromo promoveu a neutralização da acidez do solo. Entretanto, mesmo em doses relativamente baixas (360 kg ha-1), houve diminuição no acúmulo de nutrientes e na produção de matéria seca das mudas de maracujazeiro.

Acúmulo e disponibilidade de cromo, cádmio e chumbo em solos tratados com lodo de esgoto por onze anos consecutivos

The sewage sludge used for agricultural purposes provides many benefits to soil, but it contain harmful elements to environment, that infers in a great attention on its use. The aim of this work was to evaluate the effects of successive applications of sewage sludge on heavy metals accumulation (cadmium, chromium and lead) in samples of soils and corn plants, as well as evaluate the chemicals extractants efficiency in estimate the phyto disponibility of those elements. The experiment was conducted in randomized blocks design in the 2007/08 season, with 4 treatments (0, 5, 10 and 20 Mg ha-1 of sewage sludge) and 5 replicates. It was evaluated: the quantities available of Cd, Cr and Pb in soil by Melich-1, Melich-3 and DTPA extractants; the quantities extracted by corn plants; and the correlation between the disposition and quantities of those metals on whole plants, diagnosis leaves and corn grains. The application of sewage sludge for eleven consecutive years has not showed increase in total quantity nor availability of Cr, Cd and Pb in the evaluated soils. The extractor Melich-1 was the only one that showed significant correlation for availability of Cd, Cr and Pb in soil and corn plants. The correlation of metal availability in soil x leaf diagnosis was significant only for Pb with the Melich-3 and DTPA extractants

Predição do Consumo Voluntário do Capim-Tanzânia (Panicum maximum, J. cv. tanzânia), sob Pastejo, por Vacas em Lactação, a partir das Características de Degradação

O consumo de matéria seca (CMS) do capim tanzânia de 24 vacas lactantes mestiças (HPB x Gir) e Gir, sob pastejo, foi estimado no mês de janeiro de 1998, a partir da relação entre a digestibilidade da MS da forragem e a produção fecal obtida com auxílio do cromo mordente por meio de um modelo não-linear. Os resultados do consumo estimado foram comparados aos consumos preditos por diferentes equações baseadas nos dados de degradabilidade do capim, no rúmen. A pastagem foi manejada com taxa de lotação de dois animais/ha, em sistema de pastejo rotativo com três dias de ocupação do piquete e 39 dias de descanso. Foram utilizadas para predizer o CMS diferentes equações: CMS = -1,19 + 0,035 (a+ b) + 28,5c (1), CMS = -0,822 + 0,0748 (a+ b) + 40,7c (2), CMS = -8,286 + 0,266a + 0,102b +17,696c (3) e CMS = [%FDN na MS]* [consumo de FDN ] / [(1-a-b)/K P +b/(c+ k p)]/24] (4). As equações, em geral, subestimaram o consumo obtido no modelo não-linear (9,6 kg/vaca/dia). Os consumos médios de capim de 6,2 e 6,0 kg MS/vaca/dia obtidas, respectivamente, nas equações de (2) e (4) foram semelhantes entre si e inferiores ao das equações de (1) (12,7 kg/vaca/dia) e (3) (8,1 kg/vaca/dia). A predição do consumo de forrageiras tropicais, sob pastejo, utilizando-se as equações baseadas nas variáveis da degradação in situ, constitui um importante potencial para estas avaliações. Entretanto, mais estudos dessa natureza devem ser realizados para validar o uso destas equações na prática.

Estimativas de consumo do capim-elefante (Pennisetum purpureum Schum), fornecido picado para vacas lactantes utilizando a técnica do óxido crômico

O consumo de matéria seca (CMS) de vacas mestiças Holandês-Zebu, fistuladas no rúmen, em lactação, foi medido pela diferença de peso do alimento oferecido e das sobras e estimado com auxílio do óxido crômico (Cr2O3) pela produção fecal (PF) e indigestibilidade do alimento. O delineamento experimental foi em três quadrados latinos (3x3) e os tratamentos consistiram de capim-elefante cortado nas idades de 30, 45 e 60 dias. A digestibilidade in vitro da matéria seca (DIVMS) foi determinada nas amostras do capim-elefante e estimada a partir do consumo medido diretamente e pela produção fecal obtida com o Cr2O3. A produção fecal foi também calculada (PFc) a partir dos valores do consumo (direto) e da DIVMS e foi estimada pela relação do indicador administrado/indicador excretado. Foram observadas diferenças entre os CMS obtidos nas três idades de corte do capim-elefante pelos dois métodos avaliados. Os CMS médios obtidos pelo método direto foram de 8,00; 10,00 e 11,02 kg/vaca/dia, respectivamente, para o capim cortado com 30, 45 e 60 dias. Os CMS estimados com auxílio do Cr2O3 foram de 9,00; 11,10 e 12,00 kg/vaca/dia, para os mesmos tratamentos. As estimativas de consumo utilizando o Cr2O3 foram superestimadas em 9,25% em relação aos resultados obtidos pelo método direto.