678 resultados para cathelicidin-BF
Resumo:
Bedforms such as dunes and ripples are ubiquitous in rivers and coastal seas, and commonly described as triangular shapes from which height and length are calculated to estimate hydrodynamic and sediment dynamic parameters. Natural bedforms, however, present a far more complicated morphology; the difference between natural bedform shape and the often assumed triangular shape is usually neglected, and how this may affect the flow is unknown. This study investigates the shapes of natural bedforms and how they influence flow and shear stress, based on four datasets extracted from earlier studies on two rivers (the Rio Paraná in Argentina, and the Lower Rhine in The Netherlands). The most commonly occurring morphological elements are a sinusoidal stoss side made of one segment and a lee side made of two segments, a gently sloping upper lee side and a relatively steep (6 to 21°) slip face. A non-hydrostatic numerical model, set up using Delft3D, served to simulate the flow over fixed bedforms with various morphologies derived from the identified morphological elements. Both shear stress and turbulence increase with increasing slip face angle and are only marginally affected by the dimensions and positions of the upper and lower lee side. The average slip face angle determined from the bed profiles is 14°, over which there is no permanent flow separation. Shear stress and turbulence above natural bedforms are higher than above a flat bed but much lower than over the often assumed 30° lee side angle.
Resumo:
Introduction: The circadian system has neural projections for the Autonomic Nervous System (ANS), directly interfering with sympathetic-vagal modulation of the cardiovascular system. Disturbances in the circadian system, such as phase changes in light-dark cycle (LD), has been related to the risk of development of cardiovascular diseases due to increased sympathetic tone and reduction o Heart Rate Variability (HRV - RR intervals). Purpose: Investigate the interaction between Circadian Timing System and cardiac autonomic control in rats. Materials and methods: We used 18 Wistar rats (♀, age = 139.9 ± 32.1 days, weight = 219.5 ± 16.2 g), divided into three distinct groups: Control (CG), phase delay of 6h (GDe) and phase advance of 6h (GAd). Three animals were excluded during data collection (CG/GDe/GAd - n=5). Telemeters were surgically implanted in each animal for continuous acquisition of electrocardiographic (ECG) signals (duration of 21 days in the CG and 28 days in GDe/ GAd). A LD cycle was established 12h: 12h, beginning of light at18:00h and dark at 06:00h. The animals remained in the same CG LD cycle throughout the experimental period, while, on the 14th day of registration, the GDe and GAd underwent a delay and an advance in 6h, respectively. Throughout the experimental period, the locomotor activity (LA), the mean heart rate (mHR) and variables related to iRR [mean RR (mRR), SDNN, RMSSD, LF, HF and LF/ HF ratio ] were recorded. All data were analyzed in blocks of 3 and 7 days, for the presence of circadian rhythm, values of Cosinor - mesor, amplitude and acrophase (paired t test), phase relationship, differences between light and dark (t test independent), averages every 30 minutes along each time series (two-way ANOVA with post hoc Bonferroni). The data block B1,M1 and M2 in CG served as benchmarks for comparisons between series of analysis of the GAT/GAV. Results: We observed circadian rhythmicity in the variables LA, mRR and mFC(p<0.01). mRR and mFC showed phase relationship with the LA in all three groups, being less stable in GAd. In the CG, no significant differences between blocks were found in any of the analyzes(p>0.05). Among the 7 day blocks, there was a significant reduction in mRR(p=0.04) and mFC(p=0.03) in GDe and significant reduction in HF mean(p=0.02) in GAd; and between 3 day blocks, a significant increase of LF/HF(p= 0.04) in the GDe; besides mRR(p=0.03), SDNN(p=0.04), RMSSD (p=0.04), LF (p=0.01) and HF(p=0.02) significant increase in the GAd. It was found that the differences between the means of the mRR, LA and mFC in light and dark phases were not significant after phase changes in some of the blocks/moments (GDe and GAd). No significant results were found when comparing rhythmic variables means every 30 minutes over the blocks, except for a significant decrease in mRR at the middle of the dark phase (B2) and the start of light phase (B3) - (p<0.01). Conclusion: phase advances and delays (6h) altered cardiac autonomic control in the experimental groups by temporarily HRV decrease. Phase advances apparently had greater negative interference in this process, in relation to the phase delays.
Resumo:
Beamforming is a technique widely used in various fields. With the aid of an antenna array, the beamforming aims to minimize the contribution of unknown interferents directions, while capturing the desired signal in a given direction. In this thesis are proposed beamforming techniques using Reinforcement Learning (RL) through the Q-Learning algorithm in antennas array. One proposal is to use RL to find the optimal policy selection between the beamforming (BF) and power control (PC) in order to better leverage the individual characteristics of each of them for a certain amount of Signal to Interference plus noise Ration (SINR). Another proposal is to use RL to determine the optimal policy between blind beamforming algorithm of CMA (Constant Modulus Algorithm) and DD (Decision Direct) in multipath environments. Results from simulations showed that the RL technique could be effective in achieving na optimal of switching between different techniques.
Resumo:
Sediment dynamics on a storm-dominated shelf (western Bay of Plenty, New Zealand) were mapped and analyzed using the newly developed multi-sensor benthic profiler MARUM NERIDIS III. An area of 60 km × 7 km between 2 and 35 m water depth was surveyed with this bottom-towed sled equipped with a high-resolution camera for continuous close-up seafloor photography and a CTD with connected turbidity sensor. Here we introduce our approach of using this multi-parameter dataset combined with sidescan sonography and sedimentological analyses to create detailed lithofacies and bedform distribution maps and to derive regional sediment transport patterns. For the assessment of sediment distribution, photographs were classified and their spatial distribution mapped out according to associated acoustic backscatter from a sidescan sonar. This provisional map was used to choose target locations for surficial sediment sampling and subsequent laboratory analysis of grain size distribution and mineralogical composition. Finally, photographic, granulometric and mineralogical facies were combined into a unified lithofacies map and corresponding stratigraphic model. Eight distinct types of lithofacies with seawards increasing grain size were discriminated and interpreted as reworked relict deposits overlain by post-transgressional fluvial sediments. The dominant transport processes in different water depths were identified based on type and orientation of bedforms, as well as bottom water turbidity and lithofacies distribution. Observed bedforms include subaquatic dunes, coarse sand ribbons and sorted bedforms of varying dimensions, which were interpreted as being initially formed by erosion. Under fair weather conditions, sediment is transported from the northwest towards the southeast by littoral drift. During storm events, a current from the southeast to the northweast is induced which is transporting sediment along the shore in up to 35 m water depth. Shorewards oriented cross-shore transport is taking place in up to 60 m water depth and is likewise initiated by storm events. Our study demonstrates how benthic photographic profiling delivers comprehensive compositional, structural and environmental information, which compares well with results obtained by traditional probing methods, but offers much higher spatial resolution while covering larger areas. Multi-sensor benthic profiling enhances the interpretability of acoustic seafloor mapping techniques and is a rapid and economic approach to seabed and habitat mapping especially in muddy to sandy facies.
Resumo:
1 OBJETIVOS Evaluar el impacto de las bajas temperaturas, la interacción entre P. fluorescens (Pf) y L. monocytogenes (Lm) en biofilms (BF) mixtos y la capacidad para persistir de Lm sobre (i) la capacidad de Lm para desarrollar BF; (ii) los parámetros estructurales de los BF formados; (iii) la respuesta de las células adheridas de Lm frente al tratamiento con quitosano; (iiii) y su capacidad para recuperarse tras el tratamiento, tanto a nivel de densidad celular como estructural. Además, se pretendió valorar el quitosano como agente de limpieza y desinfección de los BF en la industria alimentaria, profundizando en su impacto sobre la estructura. 2 METODOLOGÍA Para llevar a cabo estos objetivos se seleccionaron un total de 10 cepas de Lm (6 persistentes y 3 esporádicas aisladas por Ortiz y col. (2010) de una industria cárnica y la cepa Lm Scott A como referencia) y la cepa Pf ATCC 948TM para formar BF puros, de cada especie, y mixtos, de Pf y cada una de las cepas de Lm, iniciando los cultivos a un nivel de cada una de las bacterias de 104 UFC·ml-1. Para la formación de BF se empleó un sistema en batch, en el que cupones de vidrio desechables (22x22 mm) semisumergidos actuaron como soporte para la adhesión. Los BF se desarrollaron a 20°C (BF “templados”) y 4°C (BF “fríos”). Los tratamientos con quitosano al 1% (w/v) consistieron en la inmersión durante 1h. Para la recuperación, los cupones tratados se revitalizaron en medio fresco (Trytone Soya Broth, TSB) a 20°C/48h. La densidad celular adherida antes, después y durante la revitalización se determinó mediante siembra del BF residual recogido del cupón en medios generales, o selectivos en el caso de los BF mixtos. Para la determinación de la biomasa adherida mediante densitometría (λ=520-570 nm), los BF fueron teñidos con una solución al 1‰ de azul de coomassie. Para las observaciones de la estructura mediante microscopía confocal láser de barrido (CLSM) las muestras se tiñeron con diferentes fluorocromos, procesándose las imágenes obtenidas mediante el software Imaris 8.2. El tratamiento estadístico de los datos se hizo con el software Statgraphics Centurion...
Resumo:
This research is funded by UK Medical Research Council grant number MR/L011115/1
Resumo:
Peer reviewed
Resumo:
© 2014 The British Psychological Society.
Resumo:
Peer reviewed
Resumo:
© 2015 The British Psychological Society.
Resumo:
The research was supported by an award from the Experimental Psychology Society's Small Grant scheme.
Resumo:
Peer reviewed
Resumo:
Peer reviewed
Resumo:
Peer reviewed
Resumo:
Portions of this research were presented at the Experimental Psychological Society conference at the University of Kent (May, 2014).The first author is supported by a studentship provided by the University of Dundee. This study was conducted as part of the requirements for the degree of Doctor of Philosophy by the first author.