A comparative study of physicochemical properties of AH Plus, Epiphany, and Epiphany SE root canal sealers

P>Aim To assess the physicochemical properties and the surface morphology of AH Plus, Epiphany, and Epiphany SE root canal sealers. Methodology Five samples of each material were employed for each test according to ANSI/ADA specification 57. The samples were assigned to four groups: (i) AH Plus; (ii) Epiphany; (iii) Epiphany + Thinning Resin; (iv) Epiphany SE. The distilled water used during the solubility test was submitted to spectrometry to verify the release of calcium ions. The morphologies of the external surface and the cross-section of the samples were analysed by means of a scanning electron microscope (SEM). Statistical analysis was performed by using One-Way anova and post hoc Tukey-Kramer tests with the null hypothesis set as 5%. Results Setting time, flow and radiopacity results were in accordance with ANSI/ADA requirements whereas the dimensional change of all sealers and solubility of Epiphany did not fulfil ANSI/ADA protocols. AH Plus and Epiphany SE were similar in terms of flow, radiopacity, solubility and dimensional change. The spectrometry test revealed significant calcium ion release from Epiphany with and without the thinning resin. SEM analysis revealed essentially a homogeneous surface with compact layer and some rough areas. Conclusions Setting time, flow, and radiopacity tests conformed to ANSI/ADA standardization. The dimensional change in all groups and the solubility of Epiphany were greater than values considered acceptable, with higher amounts of calcium ion release. Epiphany SE revealed more organized, compacted, and homogeneous polymers in a reduced resin matrix when compared with the other groups.

Microtensile Bond Strength of Glass Fiber Posts Cemented with Self-adhesive and Self-etching Resin Cements

Purpose: To evaluate the bond strength of glass fiber posts to intraradicular dentin when cemented with self-etching and self-adhesive resin cements. Materials and Methods: Forty-eight single-rooted human teeth were decoronated, endodontically treated, post-space prepared and divided into 8 groups (n = 6). The glass fiber posts used were: Exacto (EA) (Angelus) and everStick (ES) (StichTeck), which were cemented with two self-adhesive resin cements: BisCem (BIS) (Bisco) and Rely-X Unicem (UNI) (3M/ESPE), and two self-etching resin cements: Esthetic Cementing System NAC100 (NAC) (Kuraray) and Panavia-F (PAN) (Kuraray). Specimens were thermocycled between 5 degrees C and 55 degrees C for 1000 cycles and stored in water at 37 degrees C for 1 month. Four 1-mm-thick (in cross section) rods were obtained from the cervical region of the roots. Specimens were then subjected to microtensile testing in a special machine (BISCO; Schaumburg, IL, USA) at a crosshead speed of 0.5 mm/min. Microtensile bond strength (mu TBS) data were analyzed with two-way ANOVA and Tukey`s tests. Results: Means (and SD) of mu TBS (MPa) were: EA/PAN: 10.3 (4.1), EA/NAC: 14 (5.1) EA/BIS: 16.4 (4.8), EA/UNI: 19.8 (5.1), ES/PAN: 25.9 (6.1), ES/NAC: 29.1 (7), ES/BIS: 28.9 (6), ES/UNI: 30.5 (6.6). ANOVA indicated significant differences among the groups (p < 0.001). Mean mu TBS values obtained with ES post were significantly higher than those obtained with EA (p < 0.001). For EA, Tukey`s test indicated that higher mu TBS means were obtained with the self-adhesive resin cements (BIS and UNI), which were statistically significantly different (p < 0.05) from values obtained with the self-etching resin cements (PAN and NAC). Different cements had no significant effects on the bond strength values of ES post (p > 0.05). mu TBS values obtained with ES post were significantly higher than those obtained with EA post irrespective of the resin cement used. Conclusion: everStick posts resulted in the highest mean mu TBS values with all cements. Self-adhesive cements performed well in terms of bond strength.

Skin-friction measurements in a supersonic combustor with crossflow fuel injection

Shock-tunnel experiments have been performed to measure the effect on skin-friction drag in a supersonic combustor of flow disturbances induced by hydrogen fuel injection transverse to the airstream. Constant-area, circular cross section combustors of lengths varying up to 0.52 m were employed. The experiments were done at a stagnation enthalpy of 7.2 MJ . kg(-1) and a Mach number of 4.3, with a boundary layer that was turbulent downstream of the 0.14-m station in the combustors. Combustor skin-friction drag was measured by a method based on the stress wave force balance, the method being validated by agreement between fuel-off skin-friction drag measurements and predictions using existing skin-friction theories. When fuel was injected, it was found that the drag remained at fuel-off values. Thus, the streamwise vortices and other flow disturbances induced by the fuel injection, mixing, and combustion, which are expected to be present in a scramjet combustor, did not influence the skin-friction drag of the combustors.

Self-reported calcium intake and bone mineral content in children and adolescents

Objective: We examined the relationship between self-reported calcium (Cal intake and bone mineral content (BMC) in children and adolescents. We hypothesized that an expression of Ca adjusted for energy intake (El), i.e., Ca density, would be a better predictor of BMC than unadjusted Ca because of underreporting of EI. Methods: Data were obtained on dietary intakes (repeated 24-hour recalls) and BMC (by DEXA) in a cross-section of 227 children aged 8 to 17 years. Bivariate and multivariate analyses were used to examine die relationship between Ca, Ca density, and the dependent variables total body BMC and lumbar spine BMC. Covariates included were height, weight, bone area, maturity age, activity score and El. Results: Reported El compared to estimated basal metabolic rate suggested underreporting of El. Total body and lumbar spine BMC were significantly associated with El, but not Ca or Ca density, in bivariate analyses. After controlling for size and maturity, multiple linear regression analysis revealed unadjusted Ca to be a predictor of BMC in males in the total body (p = 0.08) and lumbar spine (p = 0.01). Unadjusted Ca was not a predictor of BMC at either site in females. Ca density was not a better predictor of BMC at either site in males or females. Conclusions: The relationship observed in male adolescents in this study between Ca intake and BMC is similar to that seen in clinical trials. Ca density did not enable us to see a relationship between Ca intake and BMC in females, which may reflect systematic reporting errors or that diet is not a limiting factor in this group of healthy adolescents.

A flexible method for rapid force computation in elliptical magnets

The design of open-access elliptical cross-section magnet systems has recently come under consideration. Obtaining values for the forces generated within these unusual magnets is important to progress the designs towards feasible instruments. This paper presents a novel and flexible method for the rapid computation of forces within elliptical magnets. The method is demonstrated by the analysis of a clinical magnetic resonance imaging magnet of elliptical cross-section and open design. The analysis reveals the non-symmetric nature of the generated Maxwell forces, which are an important consideration, particularly in the design of superconducting systems.

An inverse design method for elliptical MRI magnets

An inverse, current density mapping (CDM) method has been developed for the design of elliptical cross-section MRI magnets. The method provides a rapid prototyping system for unusual magnet designs, as it generates a 3D current density in response to a set of target field and geometric constraints. The emphasis of this work is on the investigation of new elliptical coil structures for clinical MRI magnets. The effect of the elliptical aspect ratio on magnet performance is investigated. Viable designs are generated for symmetric, asymmetric and open architecture elliptical magnets using the new method. Clinically relevant attributes such as reduced stray field and large homogeneous regions relative to total magnet length are included in the design process and investigated in detail. The preliminary magnet designs have several novel features.

Lanczos subspace time-independent wave packet calculations of S(D-1)+H-2 reactive scattering

In this paper. we present the results of quantum dynamical simulations of the S (D-1) + H-2 insertion reaction on a newly developed potential energy surface (J. Chem. Phys. 2001, 114, 320). State-to-state reaction probabilities. product state distributions, and initial-state resolved cumulative reaction probabilities from a given incoming reactant channel are obtained from a time-independent wave packet analysis, performed within a single Lanczos subspace. Integral reaction cross sections are then estimated by J-shifting method and compared with the results from molecular beam experiment and QCT calculations.

A study of the radiation degradation of styrene/alkane and α-methylstyrene/alkane copolymers

The effects of copolymer composition and microstructure on the radiation chemistry of styrene/alkane and alpha-methylstyrene/alkane copolymers have been studied. The primary radical species formed on radiolysis of the copolymers at 77 K, and identified by ESR spectroscopy, are the same as those formed during radiolysis of the homopolymers. The yields of radicals for the copolymer are as predicted assuming that the cross-section is proportional to the electron density of each component; however, there is some evidence of radical migration to aromatic groups at 77 K. Changes in molecular structure on irradiation were detected by using C-13 NMR spectroscopy. Evidence of the consumption of terminal double bonds, and chain scission in alpha-methylstyrene/alkane copolymers was found. Measurements of viscosity supported the mechanism of cross-linking predominating in styrene/alkane copolymers, while in alpha-methylstyrene/alkane copolymers chain scission was the major result of irradiation. (C) 2003 Society of Chemical Industry.

Transações com partes relacionadas : determinantes e impactos no desempenho das empresas

A literatura internacional que analisa os fatores impactantes das transações com partes relacionadas concentra-se no Reino Unido, nos EUA e no continente asiático, sendo o Brasil um ambiente pouco investigado. Esta pesquisa tem por objetivo investigar tanto os fatores impactantes dos contratos com partes relacionadas, quanto o impacto dessas transações no desempenho das empresas brasileiras. Estudos recentes que investigaram as determinantes das transações com partes relacionadas (TPRs), assim como seus impactos no desempenho das empresas, levaram em consideração as vertentes apresentadas por Gordon, Henry e Palia (2004): (a) de conflitos de interesses, as quais apoiam a visão de que as TPRs são danosas para os acionistas minoritários, implicando expropriação da riqueza deles, por parte dos controladores (acionistas majoritários); e (b) transações eficientes que podem ser benéficas às empresas, atendendo, desse modo, aos objetivos econômicos subjacentes delas. Esta pesquisa apoia-se na vertente de conflito de interesses, com base na teoria da agência e no fato de que o cenário brasileiro apresenta ter como característica uma estrutura de propriedade concentrada e ser um país emergente com ambiente legal caracterizado pela baixa proteção aos acionistas minoritários. Para operacionalizar a pesquisa, utilizou-se uma amostra inicial composta de 70 empresas com ações listadas na BM&FBovespa, observando o período de 2010 a 2012. Os contratos relacionados foram identificados e quantificados de duas formas, de acordo com a metodologia aplicada por Kohlbeck e Mayhew (2004; 2010) e Silveira, Prado e Sasso (2009). Como principais determinantes foram investigadas proxies para captar os efeitos dos mecanismos de governança corporativa e ambiente legal, do desempenho das empresas, dos desvios entre direitos sobre controle e direitos sobre fluxo de caixa e do excesso de remuneração executiva. Também foram adicionadas variáveis de controle para isolar as características intrínsecas das firmas. Nas análises econométricas foram estimados os modelos pelos métodos de Poisson, corte transversal agrupado (Pooled-OLS) e logit. A estimação foi feita pelo método dos mínimos quadrados ordinários (MQO), e para aumentar a robustez das estimativas econométricas, foram utilizadas variáveis instrumentais estimadas pelo método dos momentos generalizados (MMG). As evidências indicam que os fatores investigados impactam diferentemente as diversas medidas de TPRs das empresas analisadas. Verificou-se que os contratos relacionados, em geral, são danosos às empresas, impactando negativamente o desempenho delas, desempenho este que é aumentado pela presença de mecanismos eficazes de governança corporativa. Os resultados do impacto das medidas de governança corporativa e das características intrínsecas das firmas no desempenho das empresas são robustos à presença de endogeneidade com base nas regressões com variáveis instrumentais.

Métodos de estimativa de descarga sólida em rios : análise comparativa

Transporte de sedimentos em bacias hidrográficas está relacionado com geomorfologia, ecologia fluvial, estabilidade das estruturas de engenharia e condições de navegação, dentre outros aspectos importantes para o planejamento e o controle de recursos hídricos. Existência de inúmeras variáveis envolvidas na mecânica de transporte de sedimentos e complexidade nas interações de processos físicos tornam difícil o estabelecimento de metodologias indiretas para estimativa de transporte de sedimentos em rios. Desta forma, não existe ainda metodologia universalmente aceita. O principal objetivo do presente trabalho é a análise comparativa de diferentes métodos empíricos disponíveis na literatura para estimativa de descargas sólidas em rios, considerando suas características específicas e resultados de aplicações às bacias dos rios Santa Joana e Santa Maria do Doce e microbacias Sossego e Santa Júlia, inseridas na porção da bacia do rio Doce localizada no Espírito Santo. Foram aplicados os métodos de estimativa indireta de descarga sólida: Einstein Modificado por Colby e Hembree (1955); Colby Simplificado (1957); Engelund & Hansen (1967); Ackers & White (1973); Yang (1973), Karim (1998) e Cheng (2002). Considerando as médias das estimativas de descarga sólida de material de leito (Qsml) relativas às campanhas realizadas em período chuvoso para a seção transversal do rio Doce, de maior porte, o método de Karim (1998), seguido pelo método de Ackers & White (1973), apresentou o maior valor, enquanto que o método de Yang (1973) apresentou o menor. Para os rios Santa Maria do Doce e Santa Joana e os córregos Santa Júlia e Sossego, verificou-se que o método de Ackers & White (1973), seguido de Karim (1998) e Yang (1973) apresentaram as maiores médias, enquanto que os métodos de Cheng (2002) e Engelund & Hansen (1967) apresentaram as menores. O método Simplificado de Colby apresentou as maiores estimativas de descargas sólidas totais (Qst) para todas as seções transversais de todos os cursos d'água monitorados. Concluiu-se que os diferentes métodos indiretos podem resultar em grandes diferenças em estimativas de transporte de sedimento em rios e que, desta forma, resultados de aplicação destes métodos devem ser considerados com muita cautela. Os resultados mostraram a grande importância de realização de campanhas de medição sedimentométricas para avaliação do transporte de sedimentos e definição dos melhores métodos indiretos de estimativa para cursos d'água específicos.

Impacto dos investimentos em TI no resultado operacional dos bancos brasileiros

A TI transformou a indústria dos bancos nos últimos Central, e a pesquisa abrangeu o período de 1997 a anos e tornou-se estratégica e vital para o negócio. 2008. Após a especificação dos modelos econométri-Considerando essa premissa, o objetivo principal do cos, foram realizadas quatro análises sobre o impacto trabalho foi analisar o impacto dos investimentos em dos investimentos em TI: análise cross section (cortes TI no resultado operacional dos bancos que operam transversais anuais), análise longitudinal (dados em no Brasil. O modelo utilizado baseou-se em uma fun-painel), análise comparativa dos investimentos em TI ção de produção Cobb-Douglas com três variáveis, o pelos bancos nacionais e estrangeiros, e análise do resultado operacional, os investimentos em TI e os comportamento desses investimentos nos marcos do gastos com pessoal. Os dados são provenientes dos bug do milênio (Y2K) e da implantação do Sistema de saldos contábeis extraídos do sistema Cosif do Banco Pagamentos Brasileiro (SPB).

A estrutura de provisão dos serviços de saneamento básico no Brasil: uma análise comparativa do desempenho dos provedores públicos e privados

O presente artigo realiza uma análise que compara o desempenho dos provedores públicos e privados de serviços de saneamento básico no Brasil. As diferenças de desempenho entre os provedores que, de acordo com a literatura, estão submetidos a diferentes incentivos foram avaliadas com base nos dados do Sistema Nacional de Informações sobre Saneamento (Snis) de 2010 a partir de uma estimativa em cross-section para uma amostra de 4.930 municípios brasileiros. Os resultados não fornecem evidências fortes de que um grupo seja superior a outro na maior parte dos indicadores. Dado que os grupos revelaram superioridade em indicadores específicos, a contribuição deste estudo é propor o desenho de uma política que considere diversas modalidades de gestão e provisão como possível solução para o desafio de universalizar os serviços no país.

The role of an illiquidity factor in the Portuguese stock market

This study examines the role of illiquidity (proxied by the proportion of zero returns) as an additional risk factor in asset pricing. We use Portuguese monthly data, covering the period between January 1988 and December 2008. We compute an illiquidity factor using the Fama and French [Fama, E. F., and K. R. French (1993), "Common risk factors in the returns on stocks and bonds", Journal of Financial Economics, Vol. 33, Nº. 1, pp. 3-56] procedure and analyze the performance of CAPM, Fama-French three-factor model and illiquidity-augmented versions of these models in explaining both the time-series and the cross-section of returns. Our results reveal that the effect of characteristic liquidity is subsumed by the models considered, but the risk of illiquidity is not priced in the Portuguese stock market.

New physics contributions to A(FB)(t(t)over-bar) at the Tevatron

The Tevatron has measured a discrepancy relative to the standard model prediction in the forward-backward asymmetry in top quark pair production. This asymmetry grows with the rapidity difference of the two top quarks. It also increases with the invariant mass of the t (t) over bar pair, reaching, for high invariant masses, 3.4 standard deviations above the next-to-leading order prediction for the charge asymmetry of QCD. However, perfect agreement between experiment and the standard model was found in both total and differential cross section of top quark pair production. As this result could be a sign of new physics we have parametrized this new physics in terms of a complete set of dimension six operators involving the top quark. We have then used a Markov chain Monte Carlo approach in order to find the best set of parameters that fits the data, using all available data regarding top quark pair production at the Tevatron. We have found that just a very small number of operators are able to fit the data better than the standard model.

Projecto de execução de uma obra de arte

Trabalho de Projecto para obtenção do grau de Mestre em Engenharia na Área de Especialização em Estruturas