Vitrocerâmicas para blindagens balísticas

The use of ceramic materials in ballistic armor is considerable. Such materials can be very harder and lighter than metallic materials commonly used and it presents advantages to replace metallic materials when necessary toughness can be achieved. However, as SiC and Al2O3 ceramic, traditionally used for shielding, still have high manufacturing cost or low density do not have enough to shield applications such as aircraft. An alternative is the glass-ceramics, ceramics obtained by controlled crystallization of glasses, whose properties can be adjusted by choosing the chemical composition of glass, heat treatment of crystallization and special treatments such as ion exchange on the surface, resulting in increased mechanical strength . The objective of this project is to study the kinetics of crystallization of a glass composition based on cordierite (2MgO.2Al2O3.5SiO2), low density and high hardness, for the manufacture of glass-ceramics for ballistic tests. Shown in this report are results of heat treatment of crystallization and characterization by thermal analysis (DSC) glass obtained previously, indicating uneven distribution of crystals, and drying, weighing, mixing of raw materials and a new fusion of glass, the same composition

Estudo geoelétrico em ocorrência de manganês supergênico no município de Itapira (SP) por meio do método da eletrorresistividade

The geophysical methods are used as tools that, together with other data, assist in target detail and sizing of ore bodies. This paper presents the results of the application of DC resistivity geophysical method on a manganese mineral occurrence located in Itapira, in the northern portion of São Paulo state, hosted predominantly in schists and quartzits of Itapira Group. The integration of geophysical data resulted in the elaboration of electrical resistivity models, where it was possible observe that the mineralized body, composed predominantly of manganese oxides and hydroxides, has a pattern of high resistivity (above 5000 Ω.m) both surface and subsurface. The contrast with the host rock is characterized mainly by different minerals assemblages and by the presence of local groundwater. The results accomplished in this paper reveal that the application of DC resistivity method is valid in primary evaluations of supergene deposits

Estudo de causas de falhas em selos mecânicos de bombas centrífugas para circulação de óleo térmico

This study is about a heating line that uses thermal oil. It is located in a facility that produces interlayers used in cars windshields. A plastic resin is melted and is sent to a matrix called DIE where the interlayers are produced. The DIE needs to receive heat from the circulation of thermal oil in four different regions of its interior, to ensure the correct thickness of the interlayer. The thermal energy is provided by electric heaters and the flow of thermal oil is impelled by four mechanically sealed centrifugal pumps (one per region). The key point of this study is the fact that these four pumps of the system have reported successive failures in the mechanical seals. Apparently, a poorly designed project has burdened the system intermittently. The pumps operation condition is located in a region of low efficiency, according to the characteristic curves. This fact is the source of the noticeable reduced time between failures. Changes in the configuration of the facility and in the number of pumps will be proposed, aiming to achieve higher operational efficiency. The proposals will be mathematically analyzed according to the Hydraulic Institute criteria. At the same time, we will also keep focus on an in-depth study of a heating system structure, starting with a detailed approach for each component and discussion about its real need and economic viability. At the end of this paper it is shown that the gain in efficiency achieved with the new proposed configuration reflects not only in the reduction of maintenance costs, but also a potential improvement in energy efficiency. It is shown that these two aspects are closely related and together form the basis for the design of a reliable and efficient pumping system

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy

Mapeamento geológico e petrologia dos complexos máfico-ultramáficos de Mangabal Sul e Mangabal Norte, região de Sanclerlândia, Goiás

The Mangabal Sul and Mangabal Norte mafic-ultramafic complexes are interpreted as intrusive stratiform bodies in the Goiás Magmatic Arc during the Brazilian cycle, being economically important for harboring significant amounts of nickel and copper sulfides. The main lithotypes of the complexes are gabbronorites, olivine gabbronorites, pyroxenites and peridotites, with variated degrees of deformation, recrystallization and metamorphism superimposed, with metamorphic peak of amphibolite to granulite facies evidenced mainly by the occurrence of coronitic olivine in metamafic rocks and the occurrence of syn-kinematic retrometamorphism associated with the development of the main foliation Sn. The Sn foliation planes show NE-SW preferential direction, consistent with the foliation direction of VIII the enclosing gneisses and schists, also concordant with the general elongation of mafic and ultramafic bodies displayed on map. The sulfide phase presents textures that indicate remobilization, associated with the occurrence of significant amounts of rutile within the ore which reinforces this idea. Along with the sulfides, the occurrence of expressive quantities of titanium oxides such as ilmenite and rutile, make the area more economically attractive. It can be suggested that the Mangabal Norte and Mangabal Sul complexes are contemporary, have the same genetic affinity and suffered the same deformational and metamorphic processes, evidenced by their structural and petrological similarities

Sintese e caracterização do compósito TixOy- MWCNT para fotodegradação de carbaril

In this study, a composite of titanium oxide (TixOy) and carbon nanotubes multi-walled (MWCNT) was synthesized on a titanium substrate using the sol-gel method. The electrode obtained (TixOy-MWCNT/Ti) was used to the photodegradation of Carbaryl. The morphology and structure of the TixOy-MWCNT composite were characterized by scanning electron microscopy (SEM), scanning electron microscopy by field emission (FEG-SEM) and X-ray diffraction (XRD). The electrode was evaluated for degradation of Carbaryl (0.9 mmol L-1) in phosphate buffer pH 6, and using chronoamperometry by applying a potential of +1,5 V for 1 h. Using the Ultraviolet-Visible test, the absorbance at 220 nm was collected every 15 min to calculate the percentage of Cabaryl´s degradation. Can be evaluated that the Carbaryl degradation using the TixOy-MWCNT/Ti electrode was 22% more efficient when compared with the electrode without the presence of titanium oxides (MWCNT / Ti)

Determinação de chumbo em tubos de raios catódicos e em solo contaminado por espectrometria de absorção atômica

Pós-graduação em Ciência dos Materiais - FEIS

Espectroscopia de impedância eletroquímica da biodissolução da calcopirita na presença de íons ferrosos

Pós-graduação em Química - IQ

In vitro evaluation of Biosilicate® dissolution on dentin surface: a SEM analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preparação pelo método poliol modificado, caracterização estrutural e espectroscópia de nanopós de niobato de potássio e neodímio e de suas condições sólidas dopadas em európio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adsorção-fotodegradação do herbicida paraquate em água pela argila Na-Bentonita e por novos materiais TiO2-Bentonita, TiO2/ZnOBentonita, Al/Fe-Bentonita e Al/Fe.Cu-Bentonita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades ópticas de nanopartículas de halogenetos de cobre preparadas in situ em filmes híbridos de sílica

The sol-gel process is a technique based on the hydrolysis and polycondensation of metal alkoxides have been investigated as an alternative for the preparation of vitreous or glassceramic materials, for allowing the obtaining of high-purity materials at low temperatures, and to obtain hybrid materials with different compositions. When ORMOSILs are doped with nanoparticles, are called nanocomposites, and its functionality arises when electrons confined in scale three-dimensional structures near zero are excited. In principle, such materials exhibit discrete energy level, with peaks in the absorption spectrum. Therefore, the glasses doped semiconductor nanocrystals are important candidates for the preparation of optical filters with sharp cut-off, and are being exploited commercially for coloring glasses. This study evaluates the optical properties presented by hybrid films of silica doped with copper nanoparticles. The matrix was prepared using the alkoxides 3-glycidoxypropyltrimethoxysilane (GPTS) and tetraethylorthosilicate (TEOS) doped with Cu2O and hydrolyzed under reflux conditions in two different acidic conditions (HCl and HBr). After thermal treatment at temperatures between 100 °C and 170 °C and/or under the action of commercial black light radiation, CuCl and CuBr present in the hybrid film are transformed into nanoparticles of CuCl or CuBr. The UV-VIS absorption identified the absorption bands, and its variation

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Otimização dos parâmetros para obtenção de nanotubos em Ti-Cp por anodização eletroquímica e aplicação na liga experimental Ti-35Nb-7Zr

Pós-graduação em Engenharia Mecânica - FEG

Modificação de nanopartículas de óxido de ferro por dextranas

A modificação de nanopartículas de óxido de ferro tem sido motivo de diversos estudos devido ao grande potencial em aplicações tecnológicas, em especial a área biomédica, pela aliança das propriedades magnéticas dos óxidos com a funcionalidade que a dextrana confere a esse material. O presente trabalho tem como objetivo sintetizar e caracterizar o sistema óxido de ferro/dextranas. O óxido de ferro foi obtido pela reação de co-precipitação de sais de ferro (II) e ferro (III) - na razão molar 1:2 - com hidróxido de sódio e a modificação das partículas magnéticas se deu por dois métodos: (I) a co-precipitação na presença de dextrana e carboximetil dextrana e (II) a co-precipitação seguida da modificação. Para modificação proposta pelo método (II) se fez necessário enxertar a dextrana em ácido acrílico, utilizando o íon Ce(IV) como iniciador da reação de polimerização. Nessa etapa se averiguou a concentração de iniciador ótima para a síntese e, através da técnica de espectroscopia de infravermelho, se pode confirmar a eficiência do enxerto. A concentração 0,3% de íon Ce(IV) apresentou melhor distribuição de tamanho, obtidos por análises de microscopia eletrônica de varredura e espalhamento de luz dinâmico, sendo escolhida para síntese junto a partícula magnética. A difratometria de raio X permitiu determinar a formação de estrutura cristalina da magnetita e maghemita, que são muito parecidas entre si, porém os espectros de infravermelho apontaram desdobramentos da ligação Fe - O característica da maghemita. A relação Fe2+/ Fe3+ obtida por espectrofotometria também resultou em oxidação. A estabilidade coloidal dos sistemas foi avaliada através de medidas de potencial zeta. A modificação da partícula magnética com carboximetil dextrana foi equivalente para os dois métodos empregados, entretanto a modificação com ...