Effects of sintering temperature on morphology and mechanical characteristics of 3D printed porous titanium used as dental implant

Porous titanium samples were manufactured using the 3D printing and sintering method in order to determine the effects of final sintering temperature on morphology and mechanical properties. Cylindrical samples were printed and split into groups according to a final sintering temperature (FST). Irregular geometry samples were also printed and split into groups according to their FST. The cylindrical samples were used to determine part shrinkage, in compressive tests to provide stress-strain data, in microCT scans to provide internal morphology data and for optical microscopy to determine surface morphology. All of the samples were used in microhardness testing to establish the hardness. Below 1100 C FST, shrinkage was in the region of 20% but increased to approximately 30% by a FST of 1300 C. Porosity varied from a maximum of approximately 65% at the surface to the region of 30% internally. Between 97 and 99% of the internal porosity is interconnected. Average pore size varied between 24 µm at the surface and 19 µm internally. Sample hardness increased to in excess of 300 HV0.05 with increasing FST while samples with an FST of below 1250 C produced an elastic-brittle stress/strain curve and samples above this displayed elastic-plastic behaviour. Yield strength increased significantly through the range of sintering temperatures while the Young's modulus remained fairly consistent. © 2013 Elsevier B.V.

Analysis of the compressive behaviour of the three-dimensional printed porous titanium for dental implants using a modified cellular solid model

A set of cylindrical porous titanium test samples were produced using the three-dimensional printing and sintering method with samples sintered at 900 °C, 1000 °C, 1100 °C, 1200 °C or 1300 °C. Following compression testing, it was apparent that the stress-strain curves were similar in shape to the curves that represent cellular solids. This is despite a relative density twice as high as what is considered the threshold for defining a cellular solid. As final sintering temperature increased, the compressive behaviour developed from being elastic-brittle to elastic-plastic and while Young's modulus remained fairly constant in the region of 1.5 GPa, there was a corresponding increase in 0.2% proof stress of approximately 40-80 MPa. The cellular solid model consists of two equations that predict Young's modulus and yield or proof stress. By fitting to experimental data and consideration of porous morphology, appropriate changes to the geometry constants allow modification of the current models to predict with better accuracy the behaviour of porous materials with higher relative densities (lower porosity).

Mechanisms and sources of passive intermodulation in printed circuits

Modern wireless systems are expected to operate in multiple frequency bands and support diverse communications standards to provide the high volume and speed of data transmission. Today's major limitations of their performance are imposed by interference, spurious emission and noise generated by high-power carriers in antennas and passive components of the RF front-end. Passive Intermodulation (PIM), which causes the combinatorial frequency generation in the operational bands, presents a primary challenge to signal integrity, system efficacy and data throughput. © 2013 IEEE.

A Novel Dual-band Printed Diversity Antenna for Mobile Terminals

A novel dual-band printed diversity antenna is proposed and studied. The antenna, which consists of two back-to- back monopoles with symmetric configuration, is printed on a printed circuit board. The effects of some important parameters of the proposed antenna are deeply studied and the design methodology is given. A prototype of the proposed antenna operating at UMTS (1920-2170 MHz) and 2.4-GHz WLAN (2400-2484 MHz) bands is provided to demonstrate the usability of the methodology in dual-band diversity antenna for mobile terminals. In the above two bands, the isolations of the prototype are larger than 13 dB and 16 dB, respectively. The measured radiation patterns of the two monopoles in general cover complementary space regions. The diversity performance is also evaluated by calculating the envelope correlation coefficient, the mean effective gains of the antenna elements and the diversity gain. It is proved that the proposed antenna can provide spatial and pattern diversity to combat multipath fading.

Wearable inkjet-printed antenna performance for medical applications at 868/915 MHz

The use of biosensors attached to the body for health monitoring is now readily accepted, and the merits of such systems and their potential impact on healthcare receive much attention. Wearable medical systems used in clinical applications to monitor vital signs must be comfortable to wear, yet have robust performance to ensure reliable communications links. Additionally, and vital to the success of these innovations, is that these solutions are disposable to avoid risk of patient infection and this means that they must be ultra-low cost. Antennas optimized for printing using conductive inks offer new exciting advances in making a truly disposable solution.

Mechanical properties of structures 3D printed with cementitious powders

The three dimensional (3D) printing technology has undergone rapid development in the last few years and it is now possible to print engineering structures. This paper presents a study of the mechanical behavior of 3D printed structures using cementitious powder. Microscopic observation reveals that the 3D printed products have a layered orthotropic microstructure, in which each layer consists of parallel strips. Compression and flexural tests were conducted to determine the mechanical properties and failure characteristics of such materials. The test results confirmed that the 3D printed structures are laminated with apparent orthotropy. Based on the experimental results, a stress-strain relationship and a failure criterion based on the maximum stress criterion for orthotropic materials are proposed for the structures of 3D printed material. Finally, a finite element analysis was conducted for a 3D printed shell structure, which shows that the printing direction has a significant influence on the load bearing capacity of the structure.

"No Encores" The Royal Dublin Society Concert Archive Recitals in Retrospect: 1925-50

A large archive of sources for the RDS classical music recitals is extant in the Society’s Library, Ballsbridge, Dublin. The recitals were established in 1886 for the promotion of chamber music and in order to expose Dublin audiences to the works of the great composers. Extant in the collection are minute books; autographed programmes; newspaper cuttings which include previews, reviews and advertisements; correspondences with artists and agents; promotional material; selections of photographs; records of attendance, artists fees and takings; and volumes of printed music.
This paper will document the organisation, management and occurrence of the RDS classical music recitals for the period 1925 to 1950 and will encompass the opening of the current concert hall (The Members’ Hall, 1925), the Society’s bi-centenary celebrations (1931) and the continuance of the recitals within the context of the Second World War (1939- 45). The paper will examine and analyse the following: networks, repertoire and reception.
The RDS music committee established significant links with many performers and UK-based classical music agents. Recitalists include musicians of international renown; Myra Hess, Isolde Menges, Lili Kraus, Joseph Szigeti, Leon Goossens, Sir Hamilton Harty and The Hallé Orchestra, The Catterall Quartet and many local, Dublin-based musicians; Raidió Éireann Orchestra, Dublin String Orchestra, Dublin Philharmonic Orchestra and Culwick Choral Society. The compromises and collaborations in evidence between the music committee, agents and performers resulted in the presentation of varied and well-balanced programmes featuring sonatas, quartets, trios, concerti, overtures, symphonies and songs by composers including Beethoven, Mozart, Haydn and Brahms. Works by contemporary composers including Bax, Dohnanyi, Szymanowski and Suk were also regularly performed, as were works with an Irish influence or flavour. Audiences mainly consisted of members of the Society, music students were encouraged to attend at a reduced rate and reviews were regularly published in the Irish Times, Irish Independent and Irish Press.

Effects of Poly (ε-caprolactone) Coating on the Properties of Three-Dimensional Printed Porous Structures

Powder-based inkjet three-dimensional printing (3DP) to fabricate pre-designed 3D structures has drawn increasing attention. However there are intrinsic limitations associated with 3DP technology due to the weak bonding within the printed structure, which significantly compromises its mechanical integrity. In this study, calcium sulphate ceramic structures demonstrating a porous architecture were manufactured using 3DP technology and subsequently post-processed with a poly (ε-caprolactone) (PCL) coating. PCL concentration, immersion time, and number of coating layers were the principal parameters investigated and improvement in compressive properties was the measure of success. Interparticle spacing within the 3DP structures were successfully filled with PCL material. Consequently the compressive properties, wettability, morphology, and in vitro resorption behaviour of 3DP components were significantly augmented. The average compressive strength, Young’s modulus, and toughness increased 217%, 250%, and 315%, following PCL coating. Addition of a PCL surface coating provided long-term structural support to the host ceramic material, extending the resorption period from less than 7 days to a minimum of 56 days. This study has demonstrated that application of a PCL coating onto a ceramic 3DP structure was a highly effective approach to addressing some of the limitations of 3DP manufacturing and allows this advanced technology to be potentially used in a wider range of applications.

O empreendedorismo português na cidade do Recife na primeira metade do século XX

A tese analisa o empreendedorismo do imigrante português na cidade do Recife, Estado de Pernambuco, Nordeste do Brasil, durante a primeira metade do século XX. O foco da tese pode ser assim formulado: teria o imigrante português sido empreendedor nesse cenário de mudança econômica e cultural dos primeiros cinquenta anos do século XX, seja como grupo étnico, seja como pessoa de comportamento empreendedor? O corpus teórico principal é, portanto, derivado do campo do empreendedorismo. É uma pesquisa interdisciplinar, que se ampara nas áreas de história, estudos migratórios, econômicos e organizacionais. De acordo com a literatura consultada, esse tipo de abordagem não é incomum no vasto campo do empreendedorismo (Fillion, 1999 e Martinelli, 2007). À luz dessa visão interdisciplinar, a investigação debruça-se sobre o período referido, resgata a trajetória desse imigrante no país e no Recife e discute sua inserção na economia e sociedade locais. Identifica características do dinamismo econômico comercial existente no período e reconstrói a atmosfera de modernidade que a cidade atravessava no mesmo interregno histórico. Para seu desenvolvimento, a pesquisa se apóia em conteúdos de estudos migratórios, históricos e econômicos porque nesse interregno de tempo, a cidade do Recife estava atravessando a chamada era da modernidade nas esferas econômica, cultural e comportamental. No que diz respeito às questões migratórias, a pertinência é óbvia porque o tema do trabalho tem como alvo o imigrante luso. Já quanto à esfera econômica e ao contexto histórico da modernidade, seus conteúdos são trabalhados como o cenário ou o teatro de operações no qual o ator social, imigrante luso, movimentou-se. O trabalho adota, portanto, o olhar de ourives a procurar e a espiar nos textos, livros, discursos visitados e entrevistas realizadas, eventos ou sinais que conduzam à compreensão e interpretação do comportamento do ator econômico, o imigrante português, na história empresarial da cidade do Recife, na condição de empreendedor. Trata-se, por assim dizer, de uma pesquisa de postura quase arqueológica voltada a procurar achados, materiais e imateriais, que denunciem e permitam a discussão e análise do foco acima citado. Diferentemente de pesquisas recentes a serem referidas no capítulo III que exploram o comportamento empreendedor e o empreendedorismo étnico no cenário dos dias de hoje, o estudo olha pelo retrovisor para quase um século atrás e tenta reconstituir e identificar, na história do imigrante português na cidade, conteúdos empreendedorísticos. Está estruturada em 09 (nove) capítulos. No primeiro, são indicados os objetivos perseguidos, a relevância do estudo sob o ponto de vista teórico e os percalços que a pesquisa atravessou para atingir seu termo final. Faz-se, ainda, uma apresentação detalhada dos demais capítulos do trabalho. No corpo do texto, estão ainda, estampadas imagens que testemunham a presença lusa na cidade e documentam a atmosfera da vida do Recife, no período pesquisado. Os resultados encontrados sinalizam para evidências consistentes de empreendedorismo de natureza étnico lusitana nas cadeias produtivas – conceito a ser definido no 9º capítulo– das indústrias da panificação; de terreno, ferragens e construção; e alimentos em geral. Indica, ainda, comportamento empreendedor do imigrante português em diversas atividades econômicas, desde exportação e importação, cafés, restaurantes até o setor de entretenimento em geral. Acredita-se, destarte, que os resultados alcançados podem aditar contribuições relevantes nos campos referidos acima, bem como indicar novos temas de investigação que desdobrem sugestões formuladas nas considerações finais da investigação.

Cross-readings and ecoliteracy in children's pop-up books

The purpose of this text is to analyse two recently been published pop-up books aimed at children, by Anouck Boisrobert e Louis Rigaud, Popville (2009) and Dans la forêt du paresseux [Wake up, Sloth!, En el bosque del perezoso] (first published in 2009 and 2012, accompanied with texts by Joy Sorman and Sophie Strady, respectively). These books were published originally in France by Hélium Editions, but they can now be found in several western countries and in many languages (Catalan, French, Dutch, English, German, Italian, Portuguese and Spanish, at least). The objective is to analyse their verbal text and their visual aspects produced by a sophisticated paper engineered to question how they achieve what seems to be one of their goals, the promotion of the readers' ecoliteracy (Orr, 1992) by his involvement in the reading process. This issue seems to be one of the main trends on children's literature in western societies nowadays, transcending the traditional and almost omnipresent role of scenario that nature plays in many children's narratives.