Brumadoite, a new copper tellurate hydrate, from Brumado, Bahia, Brazil

Brumadoite, ideally Cu(2)Te(6+)O(4)(OH)(4)center dot 5H(2)O, is a new mineral from Pedra Preta mine, Serra das Eguas, Brumado, Bahia, Brazil. It occurs as microcrystalline aggregates both on and, rarely, pseudomorphous after coarse-grained magnesite, associated with mottramite and quartz. Crystals are platy, subhedral, 1-2 mu m in size. Brumadoite is blue (near RHS 114B), has a pale blue streak and a vitreous lustre. It is transparent to translucent and does not fluoresce. The empirical formula is (Cu(2.90)Pb(0.04)Ca(0.01))(Sigma 2.95) (Te(0.93)(6+)Si(0.05))(Sigma 0.98)O(3.92)(OH)(3.84)center dot 5.24H(2)O. Infrared spectra clearly show both (OH) and H(2)O. Microchemical spot tests using a KI Solution show that brumadoite has tellurium in the 6(+) state. The mineral is monoclinic, P2(1)/m or P2(1). Unit-cell parameters refined from X-ray powder data are a 8.629(2) angstrom, b 5.805(2) angstrom, c 7.654(2) angstrom, beta 103.17(2)degrees, V 373.3(2) angstrom(3), Z = 2. The eight strongest X-ray powder-diffraction lines [d in angstrom, (l),(hkl)] are: 8.432,(100),(100); 3.162,(66),((2) over bar 02); 2.385,(27),(220); 2.291,((1) over bar 12),(22); 1.916,(11),(312); 1.666,(14),((4) over bar 22,114); 1.452,(10), (323, 040); 1.450,(10),(422,403). The name is for the type locality, Brumado, Bahia, Brazil. The new mineral species has been approved by the CNMNC (IMA 2008-028).

Bennett Archambault Portrait

Portrait of Bennett Archambault who was a speaker at the evening school graduation of the New York Trade School in 1949. From a press release attached to the portrait: "Walter Weir, Inc., 250 West 57th Street, New York 19, N.Y., John Black, Public Relations & Publicity Department, Plaza 7-0140, May 23, 1949, For Release: Friday, May 27, 1949, BENNETT ARCHAMBAULT: Member of the Board of Trustees, New York Trade School, and Treasurer, The M.W. Kellogg Company, who reviewed the school's long history and drew an impressive picture of its future, in an address at the 68th Annual Evening School Graduation, held last night (May 26) in the school building on East 67th Street, New York." Black and white photograph.

Interview with Leonard Hewell "Kip" Carter

In his February 10, 2012 interview with Robert Ryals, Leonard Hewell “Kip” Carter details growing up in the South during segregation and the Civil Rights Movement, as well as his life as political aide/campaign treasurer to Newt Gingrich. Included are details of his college education at UNC-Chapel Hill – classes, professor, and the Red Scare. Carter shares the history of his friendship and working relationship with Newt Gingrich, the scandals Gingrich faced, and the ultimate end of their relationship. This interview was conducted for inclusion into the Louise Pettus Archives and Special Collections Oral History Program.

Factors affecting on bond strength of glass fiber post cemented with different resin cements to root canal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The STATFLUX code: a statistical method for calculation of flow and set of parameters, based on the Multiple-Compartment Biokinetical Model

The code STATFLUX, implementing a new and simple statistical procedure for the calculation of transfer coefficients in radionuclide transport to animals and plants, is proposed. The method is based on the general multiple-compartment model, which uses a system of linear equations involving geometrical volume considerations. Flow parameters were estimated by employing two different least-squares procedures: Derivative and Gauss-Marquardt methods, with the available experimental data of radionuclide concentrations as the input functions of time. The solution of the inverse problem, which relates a given set of flow parameter with the time evolution of concentration functions, is achieved via a Monte Carlo Simulation procedure.Program summaryTitle of program: STATFLUXCatalogue identifier: ADYS_v1_0Program summary URL: http://cpc.cs.qub.ac.uk/summaries/ADYS_v1_0Program obtainable from: CPC Program Library, Queen's University of Belfast, N. IrelandLicensing provisions: noneComputer for which the program is designed and others on which it has been tested: Micro-computer with Intel Pentium III, 3.0 GHzInstallation: Laboratory of Linear Accelerator, Department of Experimental Physics, University of São Paulo, BrazilOperating system: Windows 2000 and Windows XPProgramming language used: Fortran-77 as implemented in Microsoft Fortran 4.0. NOTE: Microsoft Fortran includes non-standard features which are used in this program. Standard Fortran compilers such as, g77, f77, ifort and NAG95, are not able to compile the code and therefore it has not been possible for the CPC Program Library to test the program.Memory, required to execute with typical data: 8 Mbytes of RAM memory and 100 MB of Hard disk memoryNo. of bits in a word: 16No. of lines in distributed program, including test data, etc.: 6912No. of bytes in distributed Program, including test data, etc.: 229 541Distribution format: tar.gzNature of the physical problem: the investigation of transport mechanisms for radioactive substances, through environmental pathways, is very important for radiological protection of populations. One such pathway, associated with the food chain, is the grass-animal-man sequence. The distribution of trace elements in humans and laboratory animals has been intensively studied over the past 60 years [R.C. Pendlenton, C.W. Mays, R.D. Lloyd, A.L. Brooks, Differential accumulation of iodine-131 from local fallout in people and milk, Health Phys. 9 (1963) 1253-1262]. In addition, investigations on the incidence of cancer in humans, and a possible causal relationship to radioactive fallout, have been undertaken [E.S. Weiss, M.L. Rallison, W.T. London, W.T. Carlyle Thompson, Thyroid nodularity in southwestern Utah school children exposed to fallout radiation, Amer. J. Public Health 61 (1971) 241-249; M.L. Rallison, B.M. Dobyns, F.R. Keating, J.E. Rall, F.H. Tyler, Thyroid diseases in children, Amer. J. Med. 56 (1974) 457-463; J.L. Lyon, M.R. Klauber, J.W. Gardner, K.S. Udall, Childhood leukemia associated with fallout from nuclear testing, N. Engl. J. Med. 300 (1979) 397-402]. From the pathways of entry of radionuclides in the human (or animal) body, ingestion is the most important because it is closely related to life-long alimentary (or dietary) habits. Those radionuclides which are able to enter the living cells by either metabolic or other processes give rise to localized doses which can be very high. The evaluation of these internally localized doses is of paramount importance for the assessment of radiobiological risks and radiological protection. The time behavior of trace concentration in organs is the principal input for prediction of internal doses after acute or chronic exposure. The General Multiple-Compartment Model (GMCM) is the powerful and more accepted method for biokinetical studies, which allows the calculation of concentration of trace elements in organs as a function of time, when the flow parameters of the model are known. However, few biokinetics data exist in the literature, and the determination of flow and transfer parameters by statistical fitting for each system is an open problem.Restriction on the complexity of the problem: This version of the code works with the constant volume approximation, which is valid for many situations where the biological half-live of a trace is lower than the volume rise time. Another restriction is related to the central flux model. The model considered in the code assumes that exist one central compartment (e.g., blood), that connect the flow with all compartments, and the flow between other compartments is not included.Typical running time: Depends on the choice for calculations. Using the Derivative Method the time is very short (a few minutes) for any number of compartments considered. When the Gauss-Marquardt iterative method is used the calculation time can be approximately 5-6 hours when similar to 15 compartments are considered. (C) 2006 Elsevier B.V. All rights reserved.

Influence of artificial aging in marginal adaptation of mixed class V cavities

The aim of this study was to investigate whether the artificial aging by thermal cycling had influenced the marginal adaptation of class V restorations with/without chlorhexidine application in the bond process. Twelve intact human third molars were used. Class V cavity preparations were performed on the buccal surface and the teeth received 35% phosphoric acid-etching procedure (Ultradent Products Inc., South Jordan, Utah, USA). Subsequently, the samples were divided in two groups: Untreated acid-etched dentin and chlorhexidine application as an adjunct in the bond process. The adhesive Single Bond 2 (3M ESPE, St. Paul, MN, USA) was used after 2% chlorhexidine application, and the restorations were performed with FiltekTM Z350 XT (3M ESPE) composite resin. The specimens were submitted to artificial aging by thermal cycling with 3,000 cycles. Analyzes were performed on scanning electron microscopy using replicas of marginal adaptation in percentage of continuous margin before and after the artificial aging. The data were analyzed by paired test and the results showed statistically significant differences in the percentage of continuous margin with/without chlorhexidine treatment before and after thermal cycling. This study concluded that the artificial aging by thermal cycling influenced the marginal adaptation of mixed class V composite restorations.

Características e distribuição das descargas atmosféricas e dos sistemas precipitantes produtores de raios na Amazônia Oriental

Este trabalho analisou 10 anos de distribuição espacial e temporal dos raios, dos sistemas precipitantes e suas características, como refletividade, temperatura de brilho e altura dos sistemas precipitantes amostrados pelo satélite Tropical Rainfall Measuring Mission (TRMM) através dos sensores Lightning Imaging Sensor (LIS), Precipitation Radar (PR) e TRMM Microwave Imager (TMI). Estes dados foram organizados e armazenados pelo grupo de pesquisa da convecção tropical da University of Utah no período de dezembro de 1997 a fevereiro de 2009. Também foram analisados dados de focos de queimadas detectadas pelo Instituto Nacional de Pesquisas Espaciais (INPE), no período de 1998 a 2008. Foi selecionada uma área delimitada entre 60ºW a 45ºW de longitude e 10ºS a 5ºN de latitude, a qual, posteriormente, foi dividida em nove sub-áreas para um melhor detalhamento dasinformações. Para verificar a possível influência das queimadas no número de raios, selecionaram-se oito áreas, sendo 4 com o maior número de focos de queimadas e 4 com o menor número de focos de queimadas. Os sistemas precipitantes foram classificados seguindo a metodologia de Nesbitt et. al. 2000 e obedecendo a nova definição dos dados realizado por Liu (2007). Os sistemas precipitantes amostrados pelo satélite TRMM utilizados neste trabalho são denominados ALLPFS e são definidos como aqueles que apresentam pixel de chuva estimado pelo algoritmo 2A25. Estes são classificados em PFS e OTHPFS, que respectivamente, são aqueles que apresentam e não apresentam informação de temperatura de brilho. Os PFS são sub-classificados em sistemas sem assinatura de gelo (NOICE), com assinatura de gelo (WICE) e sistemas convectivos de mesoescala (MCS), sendo que os sistemas mais intensos, dentre estes últimos, são sistemas que recebem a denominação de IMCS. Os resultados mostram que as regiões do sul do Estado do Pará, município de Belém e Ilha do Marajó foram as que apresentaram as maiores ocorrências de raios na Amazônia Oriental, com valores superiores a 20 a 35 raios/km^²/ano. Os NOICEs foram os sistemas mais frequentes em todas as regiões e os sistemas precipitantes da categoria WICE e MCS são aqueles que mais contribuem com a produção de raios sobre essas regiões. Os sistemas eletrificados apresentam grande contribuição no volume de chuva estimada sobre as áreas CENTRO e SUL, com percentuais superiores a 50% nas áreas SUL. A variação mensal dos raios na área de estudo mostrou que as maiores ocorrências de raios sobre o município de Belém são nos meses de janeiro a junho, com um pico no mês de janeiro. As maiores ocorrências no setor SUL da Amazônia Oriental concentram-se nos meses de setembro a dezembro. Nas análises sobre a interação entre os raios e as queimadas não se observou coerência, dentro das áreas de maior número de queimadas, na correlação mensal entre os raios e as queimadas, evidenciando que, apesar do grande número de queimadas observado sobre essas áreas, outros fatores interferem na produção de raios.

Time reduction of light curing: Influence on conversion degree and microhardness of orthodontic composites

Introduction: The aim of this study was to assess the influence of curing time and power on the degree of conversion and surface microhardness of 3 orthodontic composites. Methods: One hundred eighty discs, 6 mm in diameter, were divided into 3 groups of 60 samples according to the composite used-Transbond XT (3M Unitek, Monrovia, Calif), Opal Bond MV (Ultradent, South Jordan, Utah), and Transbond Plus Color Change (3M Unitek)-and each group was further divided into 3 subgroups (n = 20). Five samples were used to measure conversion, and 15 were used to measure microhardness. A light-emitting diode curing unit with multiwavelength emission of broad light was used for curing at 3 power levels (530, 760, and 1520 mW) and 3 times (8.5, 6, and 3 seconds), always totaling 4.56 joules. Five specimens from each subgroup were ground and mixed with potassium bromide to produce 8-mm tablets to be compared with 5 others made similarly with the respective noncured composite. These were placed into a spectrometer, and software was used for analysis. A microhardness tester was used to take Knoop hardness (KHN) measurements in 15 discs of each subgroup. The data were analyzed with 2 analysis of variance tests at 2 levels. Results: Differences were found in the conversion degree of the composites cured at different times and powers (P < 0.01). The composites showed similar degrees of conversion when light cured at 8.5 seconds (80.7%) and 6 seconds (79.0%), but not at 3 seconds (75.0%). The conversion degrees of the composites were different, with group 3 (87.2%) higher than group 2 (83.5%), which was higher than group 1 (64.0%). Differences in microhardness were also found (P < 0.01), with lower microhardness at 8.5 seconds (35.2 KHN), but no difference was observed between 6 seconds (41.6 KHN) and 3 seconds (42.8 KHN). Group 3 had the highest surface microhardness (35.9 KHN) compared with group 2 (33.7 KHN) and group 1 (30.0 KHN). Conclusions: Curing time can be reduced up to 6 seconds by increasing the power, with a slight decrease in the degree of conversion at 3 seconds; the decrease has a positive effect on the surface microhardness.

Efeito da microabrasão e do clareamento dental na rugosidade superficial e microdureza do esmalte dental: estudo longitudinal ‘in situ’

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)