Steady-State and Transient Performance of Biodiesel-Fueled Compression-Ignition-Based Electrical Generation

This paper investigates the performance characteristics of rapeseed methyl ester, EN 14214 biodiesel, when used for electrical generation in compression ignition engines. The work was inspired by the need to replace fossil diesel fuel with a sustainable low carbon alternative while maintaining generator performance, power quality, and compliance with ISO 8528-5. A 50-kVA Perkins diesel engine generator was used to assess the impact of biodiesel with particular regard to gen-set fuel consumption, load acceptance, and associated standards. Tests were performed on the diesel gen-set for islanded and grid-connected modes of operation, hence both steady-state and transient performance were fully explored. Performance comparisons were made with conventional fossil diesel fuel, revealing minimal technical barriers for electrical generation from this sustainable, carbon benign fuel. Recommendations for improved transient performance are proposed and validated through tests.

Decoupled-DFIG fault ride-through strategy for enhanced stability performance during grid faults

This paper proposes a decoupled fault ride-through strategy for a doubly fed induction generator (DFIG) to enhance network stability during grid disturbances. The decoupled operation proposes that a DFIG operates as an induction generator (IG) with the converter unit acting as a reactive power source during a fault condition. The transition power characteristics of the DFIG have been analyzed to derive the capability of the proposed strategy under various system conditions. The optimal crowbar resistance is obtained to exploit the maximum power capability from the DFIG during decoupled operation. The methods have been established to ensure proper coordination between the IG mode and reactive power compensation from the grid-side converter during decoupled operation. The viability and benefits of the proposed strategy are demonstrated using different test network structures and different wind penetration levels. Control performance has been benchmarked against existing grid code standards and commercial wind generator systems, based on the optimal network support required (i.e., voltage or frequency) by the system operator from a wind farm installed at a particular location.

A Framework for the Evaluation of Digital Musical Instruments

At the outset of a discussion of evaluating digital musical instruments, that is to say instruments whose sound generators are digital and separable though not necessarily separate from their control interfaces (Malloch, 2006), it is reasonable to ask what the term evaluation in this context really means. After all, there may be many perspectives from which to view the effectiveness or otherwise of the instruments we build. For most performers, performance on an instrument becomes a means of evaluating how well it functions in the context of live music making, and their measure of success is the response of the audience to their performance. Audiences evaluate performances on the basis of how engaged they feel they have been by what they have seen and heard. When questioned, they are likely to describe good performances as “exciting,” “skillful,” “musical.” Bad performances are “boring,” and those which are marred by technical malfunction are often dismissed out of hand. If performance is considered to be a valid means of evaluating a musical instrument, then it follows that, for the field of DMI design, a much broader definition of the term “evaluation” than that typically used in human-computer interaction (HCI) is required to reflect the fact that there are a number of stakeholders involved in the design and evaluation of DMIs. In addition to players and audiences, there are also composers, instrument builders, component manufacturers, and perhaps even customers, each of whom will have a different concept of what is meant by “evaluation.”

Ownership structure, organisational flexibility and store performance in retail chains.

Drawing on agency and flexible capability perspectives, the authors develop a theoretical framework explaining the impact of ownership structure on organisational flexibility and store performance in retail chains. The researchers argue that franchised stores attract more entrepreneurial managers with more flexible capabilities and they have a stronger incentive to align their flexible capabilities with the demands of the business environment. A sample of 105 franchised and company-owned stores of an optical retail chain is used to test the hypotheses. Furthermore, the study found strong support for the hypotheses that 'Franchised stores have a higher structural flexibility than company-owned stores', but only weak support for operational and strategic flexible capabilities. Furthermore, in line with the study's theoretical framework, it has been found that in a highly turbulent business environment, franchised stores perform better than company-owned stores. The paper concludes with a discussion of the implications for theory development and management of ownership structures in retail chains.

Contingency Fit, Institutional Fit, and Firm Performance: A Metafit Approach to Organization–Environment Relationships

In this paper, we attempt to reconcile contingency and institutional fit approaches concerning the organization-environment relationship. While prior scholarly research has examined both theories and compared their impacts on organizational fit and performance, we lay the groundwork for a meta-fit approach by investigating how contingency and institutional fit interact to influence firm performance. We test our theoretical framework using a dataset of 3,259 respondents from 1,904 companies regarding task environmental demands and institutional demands on organizational design across a broad range of industries and firm size classes. Our results show that contingency and institutional fit provide complementary and interdependent explanations of firm performance. Importantly, our findings indicate that for firms under conditions of “quasi-fit” rather than perfect contingency fit or optimal institutional fit, improvements in contingency and/or institutional fit will result in better performance. However, firms with high contingency fit are less vulnerable to deviation from institutional fit in the formation of firm performance, while firms with perfect institutional fit will slightly decrease their performance when they strive to achieve contingency fit.

The effects of temperature on the performance of electrochemical double layer capacitors

An electrochemical double layer capacitor test cell containing activated carbon xerogel electrodes and ionic liquid electrolyte was tested at 15, 25 and 40 OC to examine the effect of temperature on electrolyte resistance (RS) and equivalent series resistance (ESR) measured using impedance spectroscopy and capacitance using charge/discharge cycling. A commercial 10F capacitor was used as a comparison. Viscosity, ionic self-diffusion coefficients and differential scanning calorimetry measurements were used to provide an insight into the behaviour of the 1,2-dimethyl-3-propylimdazolium electrolyte. Both RS and ESR decreased with increasing temperature for both capacitors. Increasing the temperature also increased the capacitance for both the test cell and the commercial capacitor but proportionally more for the test cell. An increase in temperature decreased the ionic liquid electrolyte viscosity and increased the self diffusion coefficients of both the anion and the cation indicating an increase in dissociation and increase in ionic mobility.

Energy storage in electrochemical capacitors: designing functional materials to improve device performance

Electrochemical capacitors, also known as supercapacitors, are becoming increasingly important components in energy storage, although their widespread use has not been attained due to a high cost/ performance ratio. Fundamental research is contributing to lowered costs through the engineering of new materials. Currently the most viable materials used in electrochemical capacitors are biomassderived and polymer-derived activated carbons, although other carbon materials are useful research tools. Metal oxides could result in a step change for electrochemical capacitor technology and is an exciting area of research. The selection of an appropriate electrolyte and electrode structure is fundamental in determining device performance. Although there are still many uncertainties in understanding the underlying mechanisms involved in electrochemical capacitors, genuine progress continues to be made. It is argued that a large, collaborative international research programme is necessary to fully develop the potential of electrochemical capacitors.

Effect of activated carbon xerogel pore size on the capacitance performance of ionic liquid electrolytes

The use of ionic liquid (IL) electrolytes promises to improve the energy density of electrochemical capacitors (ECs) by allowing for operation at higher voltages. Several studies have also shown that the pore size distribution of materials used to produce electrodes is an important factor in determining EC performance. In this research the capacitative, energy and power performance of ILs 1-ethyl-3- methylimidazolium tetrafluoroborate (EMImBF4), 1-ethyl-3-methylimidazolium dicyanamide (EMImN(CN)2), 1,2-dimethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide (DMPImTFSI), and 1-butyl-3-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (BMPyT(F5Et)PF3) were studied and compared with the commercially utilised organic electrolyte 1M tetraethylammonium tetrafluoroborate solution in anhydrous propylene carbonate (Et4NBF4–PC 1 M). To assess the effect of pore size on IL performance, controlled porosity carbons were produced from phenolic resins activated in CO2. The carbon samples were characterised by nitrogen adsorption– desorption at 77 K and the relevant electrochemical behaviour was characterised by cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy. The best capacitance performance was obtained for the activated carbon xerogel with average pore diameter 3.5 nm, whereas the optimum rate performance was obtained for the activated carbon xerogel with average pore diameter 6 nm. When combined in an EC with IL electrolyte EMImBF4 a specific capacitance of 210 F g1 was obtained for activated carbon sample with average pore diameter 3.5 nm at an operating voltage of 3 V. The activated carbon sample with average pore diameter 6 nm allowed for maximum capacitance retention of approximately 70% at 64 mA cm2.

Accountability and Value for Money: A Framework for Exploring the Relationship in Private Finance Initiative Contracts

There is an implicit assumption in the UK Treasury’s publications on public-private partnerships (PPP) – also more commonly known in the United Kingdom as private finance initiative (PFI) - that accountability and value for money (VFM) are related concepts. While recent academic studies on PPP/PFI (from now on as PFI) have focused on VFM, there is a notable absence of studies exploring the ‘presumed’ relationships between accountability and VFM. Drawing on Dubnick’s (Dubnick and Romzek, 1991, 1993; Dubnick, 1996, 1998, 2003, 2005; Dubnick and Justice, 2002) framework for accountability and PFI literature, we develop a research framework for exploring potential relationships between accountability and VFM in PFI projects by proposing alternative accountability cultures, processes and mechanisms for PFI. The PFI accountability model is then exposed to four criteria - warrantability, tractability, measurability and feasibility. Our preliminary interviews provide us guidance in identifying some of the cultures, processes and mechanisms indicated in our model which should enable future researchers to test not only the UK Government’s claimed relationships between accountability and VFM using more specific PFI empirical data, but also a potential relationship between accountability and performance in general.

A Capabilities-Aware Framework for Using Computational Accelerators in Data-Intensive Computing

Multicore computational accelerators such as GPUs are now commodity components for highperformance computing at scale. While such accelerators have been studied in some detail as stand-alone computational engines, their integration in large-scale distributed systems raises new challenges and trade-offs. In this paper, we present an exploration of resource management alternatives for building asymmetric accelerator-based distributed systems. We present these alternatives in the context of a capabilities-aware framework for data-intensive computing, which uses an enhanced implementation of the MapReduce programming model for accelerator-based clusters, compared to the state of the art. The framework can transparently utilize heterogeneous accelerators for deriving high performance with low programming effort. Our work is the first to compare heterogeneous types of accelerators, GPUs and a Cell processors, in the same environment and the first to explore the trade-offs between compute-efficient and control-efficient accelerators on data-intensive systems. Our investigation shows that our framework scales well with the number of different compute nodes. Furthermore, it runs simultaneously on two different types of accelerators, successfully adapts to the resource capabilities, and performs 26.9% better on average than a static execution approach.

Doping, sport and the law: time for repeal of prohibition?

This article concerns the legal issues that surround the prohibition of doping in sport. The current policy on the use of performance enhancing drugs (PEDs) in sport is underpinned by both a paternalistic desire to protect athletes’ health and the long-term integrity or ‘spirit’ of sport. The policy is put into administrative effect globally by the World Anti-Doping Agency (WADA), which provides the regulatory and legal framework through which the vast majority of international sports federations harmonise their anti-doping programmes. On outlining briefly both the broad administrative structures of international sport’s various anti-doping mechanisms, and specific legal issues that arise in disciplinary hearings involving athletes accused of doping, this article questions the sustainability of the current ‘zero tolerance’ approach, arguing, by way of analogy to the wider societal debate on the criminalisation of drugs, and as informed by Sunstein and Thaler’s theory of libertarian paternalism, that current policy on anti-doping has failed. Moreover, rather than the extant moral and punitive panic regarding doping in sport, this article, drawing respectively on Seddon’s and Simon’s work on the history of drugs and crime control mentality, contends that, as an alternative, harm reductionist measures should be promoted, including consideration of the medically supervised use of certain PEDs.

Climate change adaptation : a decision support framework to encourage environmentally responsible behaviour

Structured Abstract:
Purpose: Very few studies investigate environmentally responsible behaviour (ERB). This paper presents a new 'Awareness Behaviour Intervention Action' (ABIA) Decision Support Framework to sustain ERB.

Design/methodology/approach: Previous ERB programmes have failed to deliver lasting results; they have not appropriately understood and provided systems to address ERB (Costanzo et al., 1986). These programmes were based on assumptions (Moloney et al., 2010), which this paper addresses. The ABIA Framework has been developed through a case study of social housing tenants waiting for low or zero carbon homes.

Findings: The ABIA Framework enables a better understanding of current attitudes to environmental issues and provides support for ERB alongside technological interventions employed to promote and sustain carbon reduction.

Research limitations/implications: The ABIA Framework should be tested on individuals and communities in a variety of socio-economic, political and cultural contexts. This will help unpack how it can impact on the behaviours of individuals and communities including stakeholders.

Practical implications: This type of research and the ABIA Framework developed from it are crucial if the UK pledge to become the first country in the World where all new homes from 2016 are to be zero carbon.

Social implications: The Framework encourages both individual and community discussion and solving of sustainability issues.

Originality/value: There are few, if any, studies that have developed a framework which can be used to support behavioural change for adaptation to sustainable living in low or zero carbon homes.

An Experimental and Numerical Study of the Static and Fatigue Performance of a Composite Adhesive Repair

Experimental static and fatigue tension-tension tests were carried out on 5HS/RTM6 composite intact coupons and coupons incorporating adhesively-bonded (FM300-2) stepped flush joints. The results show that the adhesive joint, which is widely used in repairs, significantly reduces the static strength as well as the fatigue life of the composite. Both, the static and the fatigue failure of the ‘repaired’ coupons occur at the adhesive joint and involve crack initiation and propagation. The latter is modelled using interface finite elements based on the decohezive zone approach. The material degradation in the interface constitutive law is described by a damage variable, which can evolve due to the applied loads as well as the number of fatigue cycles. The fatigue formulation, based on a published model, is adapted to fit the framework of the pseudotransient formulation that is used as a numerical tool to overcome convergence difficulties. The fatigue model requires three material parameters. Numerical tests show that a single set of these parameters can be used to recover, very accurately, the experimental S-N relationship. Sensitivity studies show that the results are not mesh dependent.

Reaching common ground:A patient-family-based conceptual framework of quality EOL care

Improvement in the quality of end-of-life (EOL) care is a priority health care issue since serious deficiencies in quality of care have been reported across care settings. Increasing pressure is now focused on Canadian health care organizations to be accountable for the quality of palliative and EOL care delivered. Numerous domains of quality EOL care upon which to create accountability frameworks are now published, with some derived from the patient/family perspective. There is a need to reach common ground on the domains of quality EOL care valued by patients and families in order to develop consistent performance measures and set priorities for health care improvement. This paper describes a meta-synthesis study to develop a common conceptual framework of quality EOL care integrating attributes of quality valued by patients and their families. © 2005 Centre for Bioethics, IRCM.