COUPLED OPTICAL-THERMAL-FLUID MODELING OF A DIRECTLY HEATED TUBULAR SOLAR RECEIVER FOR SUPERCRITICAL CO2 BRAYTON CYCLE

Recent studies have evaluated closed-loop supercritical carbon dioxide (s-CO2) Brayton cycles to be a higher energy density system in comparison to conventional superheated steam Rankine systems. At turbine inlet conditions of 923K and 25 MPa, high thermal efficiency (similar to 50%) can be achieved. Achieving these high efficiencies will make concentrating solar power (CSP) technologies a competitive alternative to current power generation methods. To incorporate a s-CO2 Brayton power cycle in a solar power tower system, the development of a solar receiver capable of providing an outlet temperature of 923 K (at 25 MPa) is necessary. The s-CO2 will need to increase in temperature by similar to 200 K as it passes through the solar receiver to satisfy the temperature requirements of a s-CO2 Brayton cycle with recuperation and recompression. In this study, an optical-thermal-fluid model was developed to design and evaluate a tubular receiver that will receive a heat input similar to 2 MWth from a heliostat field. The ray-tracing tool SolTrace was used to obtain the heat-flux distribution on the surfaces of the receiver. Computational fluid dynamics (CFD) modeling using the Discrete Ordinates (DO) radiation model was used to predict the temperature distribution and the resulting receiver efficiency. The effect of flow parameters, receiver geometry and radiation absorption by s-CO2 were studied. The receiver surface temperatures were found to be within the safe operational limit while exhibiting a receiver efficiency of similar to 85%.

Characterization of a liquid crystal microlens array using multiwalled carbon nanotube electrodes.

Reconfigurable liquid crystal microlenses employing arrays of multiwalled carbon nanotubes (MWNTs) have been designed and fabricated. The cells consist of arrays of 2 microm high MWNTs grown by plasma-enhanced chemical vapor deposition on silicon with a top electrode of indium tin oxide coated glass positioned 20 microm above the silicon and the gap filled with the nematic liquid crystal BLO48. Simulations have found that, while its nematic liquid crystal aligns with MWNTs within a distance of 10nm, this distance is greatly enhanced by the application of an external electric field. Polarized light experiments show that light is focused with focal lengths ranging from approximately 7 microm to 12 microm.

A quantum dot sensitized solar cell based on vertically aligned carbon nanotube templated ZnO arrays

We report on a quantum dot sensitized solar cell (QDSSC) based on ZnO nanorod coated vertically aligned carbon nanotubes (VACNTs). Electrochemical impedance spectroscopy shows that the electron lifetime for the device based on VACNT/ZnO/CdSe is longer than that for a device based on ZnO/CdSe, indicating that the charge recombination at the interface is reduced by the presence of the VACNTs. Due to the increased surface area and longer electron lifetime, a power conversion efficiency of 1.46% is achieved for the VACNT/ZnO/CdSe devices under an illumination of one Sun (AM 1.5G, 100 mW/cm2). © 2010 Elsevier B.V.

Capacitive nanoelectromechanical switch based on suspended carbon nanotube array

We present the fabrication and high frequency characterization of a capacitive nanoelectromechanical system (NEMS) switch using a dense array of horizontally aligned single-wall carbon nanotubes (CNTs). The nanotubes are directly grown onto metal layers with prepatterned catalysts with horizontal alignment in the gas flow direction. Subsequent wetting-induced compaction by isopropanol increases the nanotube density by one order of magnitude. The actuation voltage of 6 V is low for a NEMS device, and corresponds to CNT arrays with an equivalent Young's modulus of 4.5-8.5 GPa, and resistivity of under 0.0077 Ω·cm. The high frequency characterization shows an isolation of -10 dB at 5 GHz. © 2010 American Institute of Physics.

High-resolution TEM characterization of ZnO core-shell nanowires for dye-sensitized solar cells

Recently ZnO nanowire films have been used in very promising and inexpensive dye-sensitized solar cells (DSSC). It was found that the performance of the devices can be enhanced by functionalising the nanowires with a thin metal oxide coating. This nm-scale shell is believed to tailor the electronic structure of the nanowire, and help the absorption of the dye. Core-shell ZnO nanowire structures are synthesised at low temperature (below 120°C) by consecutive hydrothermal growth steps. Different materials are investigated for the coating, including Mg, Al, Cs and Zr oxides. High resolution TEM is used to characterise the quality of both the nanowire core and the shell, and to monitor the thickness and the degree of crystallisation of the oxide coating. The interface between the nanowire core and the outer shell is investigated in order to understand the adhesion of the coating, and give valuable feedback for the synthesis process. Nanowire films are packaged into dye-sensitised solar cell prototypes; samples coated with ZrO2 and MgO show the largest enhancement in the photocurrent and open-circuit voltage and look very promising for further improvement. © 2010 IOP Publishing Ltd.

A Label-Free Protein Microfluidic Array for Parallel Immunoassays

A label-free protein microfluidic array for immunoassays based on the combination of imaging ellipsometry and an integrated microfluidic system is presented. Proteins can be patterned homogeneously on substrate in array format by the microfluidic system simultaneously. After preparation, the protein array can be packed in the microfluidic system which is full of buffer so that proteins are not exposed to denaturing conditions. With simple microfluidic channel junction, the protein microfluidic array can be used in serial or parallel format to analyze single or multiple samples simultaneously. Imaging ellipsometry is used for the protein array reading with a label-free format. The biological and medical applications of the label-free protein microfluidic array are demonstrated by screening for antibody–antigen interactions, measuring the concentration of the protein solution and detecting five markers of hepatitis B.

Quasi-Dammann Grating With Proportional Intensity Array Spots

A quasi-Dammann grating is proposed to generate array spots with proportional-intensity orders in the far field. To describe the performance of the grating, the uniformities of the array spots are redefined. A two-dimensional even-sampling encode scheme is adopted to design the quasi-Dammann grating. Numerical solutions of the binary-phase quasi-Dammann grating with proportional-intensity orders are given. The experimental results with a third-order quasi-Dammann grating, which has an intensity proportion of 3:2:1 from zero order to second order, are presented. (C) 2008 Optical Society of America

Determinación del índice de área foliar, radiación solar no interceptada por especies forestales y concentración de magnesio en hojas de café (Coffea arabica L.) en sistemas agroforestales, localizados en Masaya, Nicaragua

La presente investigación se realizó en sistemas agroforestales con Café Coffea arábiga L.)en el Municipio de Masatepe, Nicaragua, determinando el índice de área foliar, radiación solar no interceptada por especies forestales y concentración de magnesio en hojas de Café. Para determinar índice de área foliar se utilizó una metodología no destructiva y una destructiva; la medición no destructiva se basó en la técnica de fotografías hemisféricas para lo cual se utilizó una cámara Nikon Coolpix 4500 que permitió tomar fotografías de cuatro árboles de Samanea saman, Inga laurina, Simarouba glauca, Tabebuia rosea respectivamente. Porcada árbol se tomaron cuatro imágenes sobre lados opuestos del tronco (Norte, Sur, Este y Oeste), para el análisis de fotografías hemisféricas se empleó el software Gap Light Analyzer. Para contrastar la medición de índice de área foliar por método no destructivo (fotografías hemisféricas) se empleó un método destructivo basado en la recolección de 300 hojas, se tomó el peso húmedo del total de hojas de cada uno de los árboles en estudio. Del total de hojas de cada árbol se pesaron separadamente tres muestras; utilizando el planímetro LI-3000 se calculó en cada caso el área de la hoja. Una vez obtenida el área foliar de la hoja, las muestras se secaron en horno a 65° C, durante 72 h y promediadas para obtener biomasa del follaje. Dividiendo el área foliar de las muestras entre su peso seco se obtuvo el área foliar específica, posteriormente el promedio de área foliar específica de las muestras multiplicado por el peso seco total de hojas permitió calcular el área foliar del árbol. Finalmente, se obtuvo el índice de área foliar dividiendo área foliar entre el área de suelo asignada . La medición de la cantidad de radiación incidente sobre el follaje de las plantas de Café se realizó en la réplica II en CENECOOP en dos puntos de muestreo; el criterio de selección de los sitios se basó en la combinación de árboles ubicados diagonalmente y en la uniformidad de distancia entre las especies para la combinación T. rosea + S. glaucae I. laurina + S. saman. En esta réplica se realizaron análisis del contenido de magnesio en hojas de Café en las subparcelas 5, 6, 7, 8, 9, 10, 11 y 12 más dos muestras testigos en las subparcelas 13 y 14 a pleno sol. El índice de área foliar promedio para especies tropicales estimado por el método destructivo fue de 2,52 y por el método no destructivo fue de 0,85; debido a estas diferencias es necesario aplicar un factor de corrección o calibración al método no destructivo para validar ambos resultados. En la combinación I. laurina + S. saman se detectó un mayor paso de radiación solar al cafetal (29911,11lux) posiblemente debido a las características morfológicas del dosel. La concentración de magnesio más alta es de 2% la cual se encontró en las hojas de Café de la combinación T. rosea + S. glauca en nivel de insumo orgánico moderado.