Fertility and infertility : studies in reproductive epidemiology in Australia

Worldwide, there are few large-scale epidemiological studies on infertility. In Australia, population-based research on infertility is limited to a few small-scale studies. Therefore, the prevalence of infertility and unmet need for specialist medical advice and treatment cannot be estimated reliably. Women who have used assisted reproductive technologies (ART) are recorded in treatment registries. However, there are many infertile women who are excluded from these clinical populations because they neither seek advice nor use treatment. The thesis was based on a biopsychosocial model of health and used the methods of reproductive epidemiology to address the lack of national data on the prevalence of infertility in Australia. Firstly, numbers of births and pregnancy losses were investigated in two generations of women participating in the Australian Longitudinal Study on Women’s Health (ALSWH). The ALSWH is a broad-ranging, longitudinal examination of biological, psychological and social factors that impact on women’s health and wellbeing. Women from three age cohorts were randomly sampled from the population using the universal public health insurance (i.e., Medicare) database and ALSWH participants were representative of the female population. However, the studies in the thesis only involved data from two cohorts. The younger cohort were born in 1973-78 and completed up to four mailed surveys between 1996 (when they were aged 18-23 years, n=14247) and 2006 (28-33 years, n=9145). The mid-aged cohort were born in 1946-51 and completed four mailed surveys between 1996 (when they were aged 45-50 years n=13715) and 2004 (53-58 years, n=10905). Compared to other studies that focus on outcomes of single pregnancies, these studies included all pregnancy outcomes by developing comprehensive reproductive histories for each woman. Pregnancy outcomes included birth, miscarriage, stillbirth, termination and ectopic pregnancy. Women in the youngest cohort (born in 1973-78) were only just reaching their peak childbearing years and many (44%) had yet to report their first pregnancy outcome. Women from the mid-aged cohort (born 1946-51) had completed their reproductive lives and 92% were able to report on their lifetime pregnancy outcomes. Pregnancy losses, especially miscarriage, were common for both generations of women. Secondly, the prevalence of infertility, seeking medical advice and using treatment was identified for these two generations of women. For the older generation, the lifetime prevalence of infertility and demand for treatment was investigated in the context of the specialist medical services which became available circa 1980. By this time, however, most of these older women had already been pregnant and completed their families. For women who experienced infertility (11%), their options for advice and treatment were limited and less than half (42%) had used any treatment. More recently for the younger generation of women, who were aged 28-33 years in 2006, specialist advice and treatment were extensively available. Among women who had tried to conceive or had been pregnant (n=5936), 17% had experienced infertility and the majority (72%) were able to access medical advice. However, after seeking advice only half of these infertile women had used treatment with fertility hormones or in vitro fertilisation (IVF). Overall for infertile women aged up to 33 years, only one-third had used these treatments. Thirdly, the barriers to accessing medical advice and using treatment for infertility were identified for women aged less than 34 years. Among a community sample of infertile women aged 28-33 years (ALSWH participants), self-reported depression was found to be a barrier to accessing medical advice. The characteristics of these infertile women in the community who had (n=121) or had not (n=110) used treatment were compared to infertile women aged 27-33 years (n=59) attending four fertility clinics. Compared to infertile women in the community, living in major cities and having private health insurance were associated with early use of treatment for infertility at specialist clinics by women aged <34 years. In contrast to most clinical studies of IVF, the final study reported in the thesis took into account repeated IVF cycles and the impact of women’s individual histories on IVF outcomes. Among 121 infertile women (aged 27-46 years) who had 286 IVF cycles, older age and prolonged use of the oral contraceptive pill were associated with fewer eggs collected. Further, women in particular occupations had lower proportions of eggs fertilised normally than women in other occupational groups. These studies form the first large-scale epidemiological examination of infertility in Australia. The finding that two-thirds of women with infertility had not used treatment indicates that there is an unmet need for specialist treatment in women aged less than 34 years. However, barriers to accessing treatment prevent women using ART at a younger age when there is a higher chance of pregnancy.

Performing design: game design, practice, praxis and the theatre of the impressed

This paper is a reflection on a design teaching project that endeavours to establish a culture of critical design thinking in a tertiary game design course. In the first instance, the ‘performing design’ project arose as a response to contemporary issues and tensions in the Australian games industry and game design education, in essence, the problem of how to scaffold undergraduate students from their entry point as ‘players’ (the impressed) into becoming designers. The performing design project therefore started as a small-scale intervention to inspire reflection in a wider debate that includes: the potential evolution of the contemporary games industry; the purpose of game design education; and the positioning of game design as a design discipline. Our position is that designing interactive playful works or games is victim of a tendency to simplify the discipline and view it from either the perspective of science or art. In this paper we look at some of the historical discussions on the distinct identity of games. Then we present an overview of the typical state of play in contemporary game design education which inspires the performing design project as an intervention or teaching technique. This leads us to question understandings of education and training and creativity and innovation. Finally we reflect on insights arising from the performing design project which lead us to support Archer’s call for a ‘third area’ that balances the monolithic practices of the two major academic disciplines.

Interstellar titanium-oxides in interplanetary dust

Interstellar gas abundances (Clayton et al., 1986) suggest that titanium may be bound up in dust and indeed, excess titanium in carbonaceous chondrites is attributed to mixing of interstellar and Solar System materials (Morton, 1974). Fine-grained chondritic interplanetary dust particles (lOPs) of cometary origin are relatively pristine early Solar System materials (Mackinnon and Rietmeijer, 1987; Rietmeijer, 1987) and show chemical and mineralogical signatures related to a pre-solar or nebular origin. For example, large OtH ratios suggest a presolar or interstellar dust component in some chondritic lOPs(Mackinnon and Rietmeijer, 1987). Ti/Si ratios (normalized to bulk CI) in lOPs and carbonaceous chondrite matrices exceed solar abundances but are similar to dust from comet Halley (Jessberger et al., 1987). The Ti-distribution in chondritic lOPs shows major, small-scale « 0.1 urn) variations (Flynn et al., 1978) consistent with heterogeneously distributed Ti-bearingphases. Analytical electron microscope (AEM) studies, in fact, have identified platey grains of Ti-metal, Ti407 and Ti s09 in two different lOPs (Mackinnon and Rietmeijer, 1987). The occurrence of Ti407 was related in situ low-temperature aqueous alteration and therefore implied the presence of BaTi03 (Rietmeijer and Mackinnon, 1984). Yet, the presence ofTis09 in an lOp which shows no evidence of aqueous alteration (Rietmeijer.and McKay, 1986) requires a different interpretation. The distribution of Ti-oxides in chondritic lOPs were investigated with ultra-microtomed thin sections of fluffy chondri tic lOP U2011*B (lSC allocation U2011C2) using a lEOL 2000FX AEM operating at an accelerating voltage of 200kV and with an attached Tracor Northern TN5500 energy dispersive spectrometer.

A hybrid simulation framework to assess the impact of renewable generators on a distribution network

With an increasing number of small-scale renewable generator installations, distribution network planners are faced with new technical challenges (intermittent load flows, network imbalances…). Then again, these decentralized generators (DGs) present opportunities regarding savings on network infrastructure if installed at strategic locations. How can we consider both of these aspects when building decision tools for planning future distribution networks? This paper presents a simulation framework which combines two modeling techniques: agent-based modeling (ABM) and particle swarm optimization (PSO). ABM is used to represent the different system units of the network accurately and dynamically, simulating over short time-periods. PSO is then used to find the most economical configuration of DGs over longer periods of time. The infrastructure of the framework is introduced, presenting the two modeling techniques and their integration. A case study of Townsville, Australia, is then used to illustrate the platform implementation and the outputs of a simulation.

Re-imagining STEM : peer scaffolding ICT in initial teacher education

In this paper, we report on how peer scaffolding was used to effect change in tertiary teaching practice and academic disposition in the use of Information and Communication Technology (ICT) in Science teaching and learning. We present a small-scale case study investigating the practice of one of this paper’s authors. It is told through two salient episodes which narratively describe the scaffolding used to support a teaching experiment. This was made possible through the national Teaching Teachers for the Future Project (2011-2012) which aimed to enhance the technological pedagogical capability of pre-service teachers across Australia. The outcome was a demonstrable shift in the academic’s disposition towards the use and benefits of ICT in teaching science and an increase in skills and confidence for both the academic and his students. This study and its outcomes fit within the contemporary push to “re-imagine” the teaching of Science, and more broadly of STEM, in schools.

Re-imagining STEM : peer scaffolding ICT in Initial Teacher Education

In this paper, we report on how peer scaffolding was used to effect change in tertiary teaching practice and academic disposition in the use of Information and Communication Technology (ICT) in Science teaching and learning. We present a small-scale case study investigating the practice of one of this paper’s authors. It is told through two salient episodes which narratively describe the scaffolding used to support a teaching experiment. This was made possible through the national Teaching Teachers for the Future Project (2011-2012) which aimed to enhance the technological pedagogical capability of pre-service teachers across Australia. The outcome was a demonstrable shift in the academic’s disposition towards the use and benefits of ICT in teaching science and an increase in skills and confidence for both the academic and his students. This study and its outcomes fit within the contemporary push to “re-imagine” the teaching of Science, and more broadly of STEM, in schools.

Magnetic flux analysis in superconducting Fault Current Limiters under short-circuit conditions

In order to obtain a more compact Superconducting Fault Current limiter (SFCL), a special geometry of core and AC coil is required. This results in a unique magnetic flux pattern which differs from those associated with conventional round core arrangements. In this paper the magnetic flux density within a Fault Current Limiter (FCL) is described. Both experimental and analytical approaches are considered. A small scale prototype of an FCL was constructed in order to conduct the experiments. This prototype comprises a single phase. The analysis covers both the steady state and the short-circuit condition. Simulation results were obtained using commercial software based on the Finite Element Method (FEM). The magnetic flux saturating the cores, leakage magnetic flux giving rise to electromagnetic forces and leakage magnetic flux flowing in the enclosing tank are computed.

Thai family support (TFS) : working with families of young substance users in primary health care

Living with substance users negatively impacts upon family members in many ways, and distress is common. Despite these deep and wide-ranging impacts, supportive interventions for family members in their own right are rarely available. Thailand has substantial and growing problems with substance use, and there is very little support or family members of drug users, especially in community setting. The Thai Family Support (TFS) program was designed for implementation in primary health care units (PCUs) in Thailand. TFS was based on two approaches with existing empirical support in Western contexts—the 5-step method and CRAFT—with adaptations to a Thai setting that included integration with Buddhist practices. Its aims were to increase well-being of family members, reduce mental distress, improve family relationships between family members, and engage substance users in behaviour change. A small-scale randomised controlled trial on TFS with a Delayed Treatment control was conducted, with assessments at 8 weeks (Post 1) and 20-24 weeks (Post 2). Structured interviews with participants and PCU staff and an examination of five case studies augmented the quantitative results. Mixed Model Analyses were applied to quantitative outcomes, and thematic analysis was used for qualitative data. Thirty-six participants (18 in each of Immediate and Delayed Conditions) were recruited. A significant difference at Baseline between the two conditions was observed on the Thai GHQ-28 and Gender, but it was not possible to statistically control for these effects. There was a significant Time by Condition interaction on the Thai GHQ-28, WHOQOL-BREF-THAI and FAS, reflecting greater improvements in the Immediate condition by Post 1, but with the Delayed condition meeting or exceeding that effect by Post 2. On FES Cohesion and Conflict, there were falls across conditions at Post 2, but only Cohesion also showed a Time by Condition interaction, and that effect was consistent with a delayed impact of treatment. Overall, TFS by PCU staff in the Delayed Condition gave similar results to TFS conducted by the researcher, supporting the viability of its dissemination to standard health services. Qualitative data also confirmed the quantitative results. Most participants reported physiological and psychological improvements even though their substance-using relative did not change their drug use behaviour. After completing TFS, participants reported increased knowledge, group support and sharing feeling, having positive patient-professional relationship, having greater knowledge of substance abuse and social support. In particular, they changed their behaviour towards the substance user, resulting in improvements to family relationships. PCU staff gave similar responses on the efficacy of TFS, and saw it as feasible for routine use, although some implementation challenges were identified. The cultural adaptation and in particular the religious activities, were recognised by participants and PCU staff as an important component of TFS to support psychological health and well-being. Findings from this study showed the impact of substance use on family members and difficulties that they experienced when living with the substance users, resulting distresses and burden that may develop severe mental health disease. Drug use policies should be modified to support family members and response to their needs effectively for early prevention. This study also gave preliminary support for application of the TFS program in rural primary care settings and identified some policies that will be required for it to be disseminated more broadly.

Agricultural biodiversity, farm level technical efficiency and conservation benefits : an empirical investigation

The issues involved in agricultural biodiversity are important and interesting areas for the application of economic theory. However, very little theoretical and empirical work has been undertaken to understand the benefits of conserving agricultural biodiversity. Accordingly, the main objectives of this PhD thesis are to: (1) Investigate farmers’ valuation of agricultural biodiversity; (2) Identify factors influencing farmers’ demand for agricultural biodiversity; (3) Examine farmers’ demand for biodiversity rich farming systems; (4) Investigate the relationship between agricultural biodiversity and farm level technical efficiency. This PhD thesis investigates these issues by using primary data in small-scale farms, along with secondary data from Sri Lanka. The overall findings of the thesis can be summarized as follows. Firstly, owing to educational and poverty issues of those being interviewed, some policy makers in developed countries question whether non-market valuation techniques such as Choice Experiment (CE) can be applied to developing countries such as Sri Lanka. The CE study in this thesis indicates that carefully designed and pre-tested nonmarket valuation techniques can be applied in developing countries with a high level of reliability. The CE findings support the priori assumption that small-scale farms and their multiple attributes contribute positively and significantly to the utility of farm families in Sri Lanka. Farmers have strong positive attitudes towards increasing agricultural biodiversity in rural areas. This suggests that these attitudes can be the basis on which appropriate policies can be introduced to improve agricultural biodiversity. Secondly, the thesis identifies the factors which influence farmers’ demand for agricultural biodiversity and farmers’ demands on biodiversity rich farming systems. As such they provide important tools for the implementation of policies designed to avoid the loss agricultural biodiversity which is shown to be a major impediment to agricultural growth and sustainable development in a number of developing countries. The results illustrate that certain key household, market and other characteristics (such as agricultural subsidies, percentage of investment of owned money and farm size) are the major determinants of demand for agricultural biodiversity on small-scale farms. The significant household characteristics that determine crop and livestock diversity include household member participation on the farm, off-farm income, shared labour, market price fluctuations and household wealth. Furthermore, it is shown that all the included market characteristics as well as agricultural subsidies are also important determinants of agricultural biodiversity. Thirdly, it is found that when the efficiency of agricultural production is measured in practice, the role of agricultural biodiversity has rarely been investigated in the literature. The results in the final section of the thesis show that crop diversity, livestock diversity and mix farming system are positively related to farm level technical efficiency. In addition to these variables education level, number of separate plots, agricultural extension service, credit access, membership of farm organization and land ownerships are significant and direct policy relevant variables in the inefficiency model. The results of the study therefore have important policy implications for conserving agricultural biodiversity in Sri Lanka.

User facilitated congestion and attack mitigation

The IEEE Wireless LAN standard has been a true success story by enabling convenient, efficient and low-cost access to broadband networks for both private and professional use. However, the increasing density and uncoordinated operation of wireless access points, combined with constantly growing traffic demands have started hurting the users' quality of experience. On the other hand, the emerging ubiquity of wireless access has placed it at the center of attention for network attacks, which not only raises users' concerns on security but also indirectly affects connection quality due to proactive measures against security attacks. In this work, we introduce an integrated solution to congestion avoidance and attack mitigation problems through cooperation among wireless access points. The proposed solution implements a Partially Observable Markov Decision Process (POMDP) as an intelligent distributed control system. By successfully differentiating resource hampering attacks from overload cases, the control system takes an appropriate action in each detected anomaly case without disturbing the quality of service for end users. The proposed solution is fully implemented on a small-scale testbed, on which we present our observations and demonstrate the effectiveness of the system to detect and alleviate both attack and congestion situations.

A USANS/SANS study of the accessibility of pores in the barnett shale to methane and water

Shale is an increasingly important source of natural gas in the United States. The gas is held in fine pores that need to be accessed by horizontal drilling and hydrofracturing techniques. Understanding the nature of the pores may provide clues to making gas extraction more efficient. We have investigated two Mississippian Barnett Shale samples, combining small-angle neutron scattering (SANS) and ultrasmall-angle neutron scattering (USANS) to determine the pore size distribution of the shale over the size range 10 nm to 10 μm. By adding deuterated methane (CD4) and, separately, deuterated water (D2O) to the shale, we have identified the fraction of pores that are accessible to these compounds over this size range. The total pore size distribution is essentially identical for the two samples. At pore sizes >250 nm, >85% of the pores in both samples are accessible to both CD4 and D2O. However, differences in accessibility to CD4 are observed in the smaller pore sizes (∼25 nm). In one sample, CD4 penetrated the smallest pores as effectively as it did the larger ones. In the other sample, less than 70% of the smallest pores (<25 nm) were accessible to CD4, but they were still largely penetrable by water, suggesting that small-scale heterogeneities in methane accessibility occur in the shale samples even though the total porosity does not differ. An additional study investigating the dependence of scattered intensity with pressure of CD4 allows for an accurate estimation of the pressure at which the scattered intensity is at a minimum. This study provides information about the composition of the material immediately surrounding the pores. Most of the accessible (open) pores in the 25 nm size range can be associated with either mineral matter or high reflectance organic material. However, a complementary scanning electron microscopy investigation shows that most of the pores in these shale samples are contained in the organic components. The neutron scattering results indicate that the pores are not equally proportioned in the different constituents within the shale. There is some indication from the SANS results that the composition of the pore-containing material varies with pore size; the pore size distribution associated with mineral matter is different from that associated with organic phases.

Thermogravimetric analysis of selected layered double hydroxides

Thermogravimetric analysis (TG) and powder X-ray diffraction (PXRD) were used to study some selected Mg/Al and Zn/Al layered double hydroxides (LDHs) prepared by co-precipitation. A Mg/Al hydrotalcite was investigated before and after reformation in fluoride and nitrate solutions. Little change in the TG or PXRD patterns was observed. It was proposed that successful intercalation of nitrate anions has occurred. However, the absence of any change in the d(003) interlayer spacing suggests that fluoride anions were not intercalated between the LDH layers. Any fluoride anions that were removed from solution are most likely adsorbed onto the outer surfaces of the hydrotalcite. As fluoride removal was not quantified it is not possible to confirm that this has happened without further experimentation. Carbonate is probably intercalated into the interlayer of these hydrotalcites, as well as fluoride or nitrate. The carbonate most likely originates from either incomplete decarbonation during thermal activation or adsorption from the atmosphere or dissolved in the deionised water. Small and large scale co-precipitation syntheses of a Zn/Al LDH were also investigated to determine if there was any change in the product. While the small scale experiment produced a good quality LDH of reasonable purity; the large scale synthesis resulted in several additional phases. Imprecise measurement and difficulty in handling the large quantities of reagents appeared to be sufficient to alter the reaction conditions causing a mixture of phases to be formed.

The Stitchery collective : fashion in an expanded field

This practice-based presentation explores the role of fashion as an agent for social inclusion and ethical design practice in communities. The Stitchery Collective is an artist-run initiative based in Brisbane, Australia. Operating at the intersection of craft and design, the fashion-based initiative challenges the assumption that fashion is designed, produced and consumed exclusively in the commercial sector. As a not-for-profit cooperative, the stitchery collective is the first and only fashion organisation in Australia to attract funding under the national and state artist-run-initiative scheme. The collective approach extends to the stitchery design practice, facilitated by individual practitioners working within the organisation who devise programs in the context of collaborative and socially engaged design. Working under the banner of a question, Can fashion be more than pretty clothes for pretty people? the stitchery works to extend the cultural field of fashion practice in the 21st century. The premise of dress as a ‘significant creative or cultural expression’ has informed the expanded definition of fashion practice, as adopted by the stitchery. This alternative classification has fostered partnerships with numerous community groups, including those marginalised in the contemporary fashion context such as recent migrants and refugees. Community engagement programs span design, sewing and up-cycling workshops, sustainability lectures, clothing swaps and public education seminars, supported by partnerships with various cultural, government and educational institutions. In 2011, the stitchery travelled to the Venice Biennale’s 3rd International Children’s Carnival, hosting a workshop series and installation to promote design for sustainability. The proven potential for design to connect community members has motivated the stitchery to question the opportunity for fashion practice to, perhaps uncharacteristically, operate under the banner of ‘design for social good’. Acknowledging craft and design as relational fields, this presentation expands fashion as a tool for social innovation and sustainable practice. The stitchery dislocates the consumer status of fashion with small-scale, localised projects; moving beyond fashion as a dictum of social class to an alternative model that is accessible, conscious, flexible, connected and sustainable. As an undefined post-industrial future approaches, the non-commercial status of the stitchery practice might work to present an image of the active post-consumer. How can the stitchery propose a resilient model of design for the future?

Urban agriculture : a growing field of research workshop at INTERACT 2013

Growing food presents diverse challenges and opportunities within the urban environment. As cities develop, population density rises, land prices rise, and the opportunity to use land for traditional farming and gardening diminishes. Counter to this trend there are a growing number of both community gardens, city farms, guerrilla gardening, rooftop and vertical gardens, pot plants, windowsill herbs, and other balcony or backyard gardens cropping up in different cities, all with a purpose to produce food. This workshop brings to-gether practitioners and researchers in the field of urban agriculture and Hu-man-Computer Interaction to explore and opportunities for technology design to support the different forms of growing practice and foster local food production in cities. This 1-day workshop will serve as an active forum for researchers and practi-tioners across various fields including, but not limited to, agriculture and gar-dening, education, urban planning, human-computer interaction, and communi-ty engagement. This workshop has three distinct points of focus: i) Individual and small-scale gardening and food production, and how to connect like minded people who are involved in these practices to share their knowledge ii) Com-munities involved in urban agriculture, either through community gardens, city farms, or grassroots movements, often dependant on volunteer participation, providing the challenge of managing limited resources iii) Environmental and sociocultural sustainability through urban agriculture. The participants will have an opportunity to present their own work. This will be followed by a visit to a nearby city farm, which will provide a local context for a group design exercise. Finally the workshop will conclude with panel dis-cussions to review opportunities for further research and collaborations beyond the conference. For more information, please visit the workshop website, at http://www.urbaninformatics.net/resources/interact2013cfp/

Genetic improvement of giant freshwater prawn in Vietnam

The giant freshwater prawn (Macrobrachium rosenbergii) or GFP is one of the most important freshwater crustacean species in the inland aquaculture sector of many tropical and subtropical countries. Since the 1990’s, there has been rapid global expansion of freshwater prawn farming, especially in Asian countries, with an average annual rate of increase of 48% between 1999 and 2001 (New, 2005). In Vietnam, GFP is cultured in a variety of culture systems, typically in integrated or rotational rice-prawn culture (Phuong et al., 2006) and has become one of the most common farmed aquatic species in the country, due to its ability to grow rapidly and to attract high market price and high demand. Despite potential for expanded production, sustainability of freshwater prawn farming in the region is currently threatened by low production efficiency and vulnerability of farmed stocks to disease. Commercial large scale and small scale GFP farms in Vietnam have experienced relatively low stock productivity, large size and weight variation, a low proportion of edible meat (large head to body ratio), scarcity of good quality seed stock. The current situation highlights the need for a systematic stock improvement program for GFP in Vietnam aimed at improving economically important traits in this species. This study reports on the breeding program for fast growth employing combined (between and within) family selection in giant freshwater prawn in Vietnam. The base population was synthesized using a complete diallel cross including 9 crosses from two local stocks (DN and MK strains) and a third exotic stock (Malaysian strain - MY). In the next three selection generations, matings were conducted between genetically unrelated brood stock to produce full-sib and (paternal) half-sib families. All families were produced and reared separately until juveniles in each family were tagged as a batch using visible implant elastomer (VIE) at a body size of approximately 2 g. After tags were verified, 60 to 120 juveniles chosen randomly from each family were released into two common earthen ponds of 3,500 m2 pond for a grow-out period of 16 to 18 weeks. Selection applied at harvest on body weight was a combined (between and within) family selection approach. 81, 89, 96 and 114 families were produced for the Selection line in the F0, F1, F2 and F3 generations, respectively. In addition to the Selection line, 17 to 42 families were produced for the Control group in each generation. Results reported here are based on a data set consisting of 18,387 body and 1,730 carcass records, as well as full pedigree information collected over four generations. Variance and covariance components were estimated by restricted maximum likelihood fitting a multi-trait animal model. Experiments assessed performance of VIE tags in juvenile GFP of different size classes and individuals tagged with different numbers of tags showed that juvenile GFP at 2 g were of suitable size for VIE tags with no negative effects evident on growth or survival. Tag retention rates were above 97.8% and tag readability rates were 100% with a correct assignment rate of 95% through to mature animal size of up to 170 g. Across generations, estimates of heritability for body traits (body weight, body length, cephalothorax length, abdominal length, cephalothorax width and abdominal width) and carcass weight traits (abdominal weight, skeleton-off weight and telson-off weight) were moderate and ranged from 0.14 to 0.19 and 0.17 to 0.21, respectively. Body trait heritabilities estimated for females were significantly higher than for males whereas carcass weight trait heritabilities estimated for females and males were not significantly different (P > 0.05). Maternal and common environmental effects for body traits accounted for 4 to 5% of the total variance and were greater in females (7 to 10%) than in males (4 to 5%). Genetic correlations among body traits were generally high in both sexes. Genetic correlations between body and carcass weight traits were also high in the mixed sexes. Average selection response (% per generation) for body weight (transformed to square root) estimated as the difference between the Selection and the Control group was 7.4% calculated from least squares means (LSMs), 7.0% from estimated breeding values (EBVs) and 4.4% calculated from EBVs between two consecutive generations. Favourable correlated selection responses (estimated from LSMs) were detected for other body traits (12.1%, 14.5%, 10.4%, 15.5% and 13.3% for body length, cephalothorax length, abdominal length, cephalothorax width and abdominal width, respectively) over three selection generations. Data in the second selection generation showed positive correlated responses for carcass weight traits (8.8%, 8.6% and 8.8% for abdominal weight, skeleton-off weight and telson-off weight, respectively). Data in the third selection generation showed that heritability for body traits were moderate and ranged from 0.06 to 0.11 and 0.11 to 0.22 at weeks 10 and 18, respectively. Body trait heritabilities estimated at week 10 were not significantly lower than at week 18. Genetic correlations between body traits within age and genetic correlations for body traits between ages were generally high. Overall our results suggest that growth rate responds well to the application of family selection and carcass weight traits can also be improved in parallel, using this approach. Moreover, selection for high growth rate in GFP can be undertaken successfully before full market size has been reached. The outcome of this study was production of an improved culture strain of GFP for the Vietnamese culture industry that will be trialed in real farm production environments to confirm the genetic gains identified in the experimental stock improvement program.