Impact of platelet rich plasma and adipose stem cells on lymphangiogenesis in a murine tail lymphedema model.

BACKGROUND: Lymphedema is an underdiagnosed pathology which in industrialized countries mainly affects cancer patients that underwent lymph node dissection and/or radiation. Currently no effective therapy is available so that patients' life quality is compromised by swellings of the concerned body region. This unfortunate condition is associated with body imbalance and subsequent osteochondral deformations and impaired function as well as with an increased risk of potentially life threatening soft tissue infections. METHODS: The effects of PRP and ASC on angiogenesis (anti-CD31 staining), microcirculation (Laser Doppler Imaging), lymphangiogenesis (anti-LYVE1 staining), microvascular architecture (corrosion casting) and wound healing (digital planimetry) are studied in a murine tail lymphedema model. RESULTS: Wounds treated by PRP and ASC healed faster and showed a significantly increased epithelialization mainly from the proximal wound margin. The application of PRP induced a significantly increased lymphangiogenesis while the application of ASC did not induce any significant change in this regard. CONCLUSIONS: PRP and ASC affect lymphangiogenesis and lymphedema development and might represent a promising approach to improve regeneration of lymphatic vessels, restore disrupted lymphatic circulation and treat or prevent lymphedema alone or in combination with currently available lymphedema therapies.

Henkilökohtaisia valintoja : henkilökäsikirjoittaminen aihelähtöisessä dokumentissa

Opinnäytetyöni on monimuototyö. Se koostuu dokumenttielokuvasta ja kirjallisesta tutkielmasta, jossa käsittelen aihelähtöisen dokumentin henkilökäsikirjoittamista. Kirjallisuuden ja suomalaisten ohjaajien haastatteluiden pohjalta tutkin dokumentin käsikirjoittamisen mahdollisuuksia, pohdin henkilövalintojen merkitystä onnistuneelle dokumenttielokuvalle, jäljitän toimivan päähenkilön tärkeimpiä ominaisuuksia sekä selvitän keinoja onnistuneiden henkilövalintojen tekemiseen. Lisäksi luon listaa siitä, mitä henkilöistä pitäisi ennen kuvausvaihetta ainakin tietää ja mitä kaikkea tästä tiedosta tulisi sisällyttää dokumentin lopulliseen käsikirjoitukseen. Tutkielmani oppeja olen pyrkinyt soveltamaan dokumenttielokuvan Suuri urakka ennakkotutkimusvaiheessa. Dokumentti seuraa kahden nuoren aikuisen tuntemuksia heidän pyrkiessään uuteen opiskelupaikkaan täydellisen alanvaihdoksen jälkeen. Kirjallisen osan lopuksi selostan henkilövalintoihin johtanutta prosessia ja pohdin, kuinka itse onnistuin tavoitteessani löytää elokuvan teemaan parhaiten sopivat päähenkilöt. Henkilövalinnoilla on ratkaiseva merkitys dokumenttielokuvan onnistumiselle. Monet dokumentit lepäävät henkilöidensä varassa, sillä heidän persoonallisuutensa ja toimintansa kautta syntyvät lähes kaikki elokuvan tilanteet ja tarina. Haasteellisinta henkilöiden löytäminen on aihelähtöiseen, deduktiivista lähestymisstrategiaa käyttävään, antropologiseen tai havainnoivaan, luovaan, voice-overittomaan, pitkään seurantadokumenttiin. Toimiva päähenkilö on sympaattinen ja vaikeassa tilanteessa syyttä kärsivä. Hänellä on tavoite, jota hän toiminnallaan tavoittelee sekä vastavoima. Elokuvan aikana hän kehittyy ja muuttuu. Lisäksi hän on avoin, karismaattinen, sitoutunut prosessiin ja luonteva kameran edessä. Ennakkotutkimusvaiheen tehtäviä ovat henkilögallerian luominen, potentiaalisten henkilöiden etsiminen, henkilöihin tutustuminen ja heidän ominaisuuksistaan varmistuminen, luottamuksen synnyttäminen sekä henkilöiden sitouttaminen prosessiin. Henkilöistä tulisi ennen kuvausvaiheen aloittamista tietää ainakin syvimmät kipupisteet ja ilot, suhde dokumentin aiheeseen, rehellisyys, motiivi sekä tärkeimmät tavoitteet.

Tectonic-palaeoenvironmental forcing of clay-mineral assemblages in nonmarine settings: the Oligocene-Miocene As Pontes Basin (Spain)

Two small, alluvial-lacustrine subbasins developed during the early restraining overstep stages of the Oligocene-Miocene As Pontes strike-slip Basin (NW Spain). Later, the basin evolved into a restraining bend stage and an alluvial-swamp-dominated depositional framework developed. The palaeobiological record demonstrates that the Oligocene-Miocene palaeoclimate in NW Spain was subtropical, warm and humid to subhumid.

An active zone characterized by slow normal faults, the northwestern margin of the València trough (NE Iberia): a review

The northwestern margin of the Valencia trough is an area of low strain characterized by slow normal faults and low to moderate seismicity. Since the mid 1990s this area has been the subject of a number of studies on active tectonic which have proposed different approaches to the location of active faults and to the calculation of the parameters that describe their seismic cycle. Fifty-six active faults have been found and a classification has been made in accordance with their characteristics: a) faults with clear evidence of large paleo-, historic or instrumental earthquakes (2/56); b) faults with evidence of accumulated activity during the Plio-Quaternary and with associated instrumental seismicity (7/56); c) faults with evidence of accumulated activity during the Plio-Quaternary and without associated instrumental seismicity (17/56); d) faults with associated instrumental seismicity and without evidence of accumulated activity during the Plio-Quaternary (30/56), and e) faults without evidence of activity or inactive faults. The parameters that describe the seismic cycle of these faults have been evaluated by different methods that use the geological data obtained for each fault except when paleoseismological studies were available. This classification can be applied to other areas with low slip faults because of the simplicity of the approaches adopted. This study reviews the different approaches proposed and describes the active faults located, highlighting the need a) to better understand active faults in slow strain zones through paleoseismological studies, and b) to include them in seismic hazard studies.

Evidence for coseismic events of recurrent prehistoric deformation along the Alhama de Murcia fault, southeastern Spain

The Alhama de Murcia fault is a 85 km long oblique-slip fault, and is related to historical and instrumental seismic activity. A paleoseismic analysis of the Lorca-Totana sector of the fault containing MSK I=VIII historical earthquakes was made in order to identify and quantify its seismic potential. We present 1) the results of the neotectonic, structural and geomorphological analyses and, 2) the results of trenching. In the study area, the Alhama de Murcia fault forms a depressed corridor between two strands, the northwestern fault with morphological and structural features of a reverse component of slip, bounding the La Tercia range to the South, and the southeastern fault strand with evidence of sinistral oblique strike-slip movement. The offset along this latter fault trapped the sediments in transit from the La Tercia range towards the Guadalentín depression. The most recent of these sediments are arranged in three generations of alluvial fans and terraces. The first two trenches were dug in the most recent sediments across the southeastern fault strand. The results indicate a coseismic reverse fault deformation that involved the sedimentary sequence up to the intermediate alluvial fan and the Holocene terrace deposits. The sedimentary evolution observed in the trenches suggests an event of temporary damming of the Colmenar creek drainage to the South due to uplifting of the hanging wall during coseismic activation of the fault. Trench, structural and sedimentological features provide evidence of at least three coseismic events, which occurred after 125,000 yr. The minimum vertical slip rate along the fault is 0.06 mm/yr and the average recurrence period should not exceed 40,000 yr in accordance with the results obtained by fan topographic profiling. Further absolute dating is ongoing to constrain these estimates.

Phase behavior and rheological analysis of reverse liquid crystals and W/I2, W/H2 gel emulsions using an amphiphilic block copolymer.

This article reports the phase behavior determi- nation of a system forming reverse liquid crystals and the formation of novel disperse systems in the two-phase region. The studied system is formed by water, cyclohexane, and Pluronic L-121, an amphiphilic block copolymer considered of special interest due to its aggregation and structural proper- ties. This system forms reverse cubic (I2) and reverse hexagonal (H2) phases at high polymer concentrations. These reverse phases are of particular interest since in the two-phase region, stable high internal phase reverse emulsions can be formed. The characterization of the I2 and H2 phases and of the derived gel emulsions was performed with small-angle X-ray scattering (SAXS) and rheometry, and the influence of temperature and water content was studied. TheH2 phase experimented a thermal transition to an I2 phase when temperature was increased, which presented an Fd3m structure. All samples showed a strong shear thinning behavior from low shear rates. The elasticmodulus (G0) in the I2 phase was around 1 order of magnitude higher than in theH2 phase. G0 was predominantly higher than the viscousmodulus (G00). In the gel emulsions,G0 was nearly frequency-independent, indicating their gel type nature. Contrarily to water-in-oil (W/O) normal emulsions, in W/I2 and W/H2 gel emulsions, G0, the complex viscosity (|η*|), and the yield stress (τ0) decreased with increasing water content, since the highly viscous microstructure of the con- tinuous phase was responsible for the high viscosity and elastic behavior of the emulsions, instead of the volumefraction of dispersed phase and droplet size. A rheological analysis, in which the cooperative flow theory, the soft glass rheology model, and the slip plane model were analyzed and compared, was performed to obtain one single model that could describe the non-Maxwellian behavior of both reverse phases and highly concentrated emulsions and to characterize their microstructure with the rheological properties.

Present-day deformation of the Pyrenees revealed by GPS surveying and earthquake focal mechanisms until 2011

The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995 1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the 'r' factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.

Preparation of Polysulfone Membranes

As it is known, a huge part of all commercially available membranes are prepared by immersion precipitation. This way is the primary way to get flat membranes. The advantages of immersion precipitation are: wide field of the polymers, which can be used (polymer must be soluble in a solvent or a solvent mixture) and ease of performing. The literature part of this work deals with phase inversion membrane preparation methods and casting parameters affecting membrane performance. Also some membrane types and materials are discussed. In the experimental part of this work 73 membrane samples were made with different casting parameters (polymer concentration in the casting solution and precipitation time) and tested for the retention and permeability. The results of these experiments are collected and combined into the figures and tables which are presented in this thesis. This work showed and confirmed connection between membrane performance and casting parameters (concentration of polymer in the casting solution and precipitation time).

Tuulivoimalan generaattorin roottorin valmistuksen ja valmistuskustannusten arviointi

Diplomityössä on käsitelty tuulivoimalan generaattorin roottorin valmistusta ja magneettien kiinnitystä. Työ on osa projektia, jonka tarkoituksena on ollut tuottaa kohdeyritykselle vaihtoehtoinen tuulivoimalan generaattorin roottorirakenne. Työhön on koottu projektissa käsitellyt asiat roottorin valmistustekniikan osalta. Työssä on selvitetty kustannuksien kannalta paras vaihtoehto roottorin valmistamiseksi sisältäen kuljetukset ja magneettien kokoonpanon. Valmistusmenetelminä on vertailtu hitsausta ja valamista. Magneettien osalta tarkasteltiin uuden vaihtoehtoisen kiinnitysmenetelmän tuomia säästöjä nykyiseen ratkaisuun verrattuna. Uusien roottorien kustannuksia on verrattu nykyiseen rakenteeseen. Tutkimusmenetelminä on käytetty projektiryhmän palavereja, haastatteluja ja kirjallisuusselvityksiä. Lopputuloksena kohdeyritykselle luotiin uusi roottorikonsepti, jossa yhdistyvät edullisempi roottorin valmistus ja magneettien kiinnitys. Roottorin valmistaminen valamalla osoittautui selvästi edullisemmaksi kuin hitsaaminen levyistä. Magneettien kiinnitystä yksinkertaistettiin käyttämällä seostettuja magneetteja ja magneettikehyksiä. Roottorin konstruktiomuutoksien avulla mahdollistettiin suurempi magneettien määrä, joka mahdollistaa suuremman tehontuoton.

Caracterização físico-química de filmes comestíveis de amido adicionado de acerola (Malphigia emarginata D.C.)

Edibles films are an alternative to synthetic materials used for packing food products. Barbados cherry is rich in vitamin C and carotenoids. The aim of this study was to characterize and develop films by casting from cassava starch, lyophilized Barbados cherry pulp and glycerol. The films were characterized with respect to thickness, water vapor permeability (WVP), water solubility, vitamin C, carotene and mechanical properties. The interaction of pulp and glycerol reduced film thickness. An increase in pulp concentration up to 60% increased WVP but beyond this concentration reduced both WVP and solubility leading to an increased level of vitamin C and β carotene in the films.

Characterization and in vitro release of cyclosporine-A from poly(D,L-lactide-co-glycolide implants obtained by solvent/extraction evaporation

Cyclosporine-A-loaded PLGA implants were developed intended for ocular route. Implants were prepared using solvent extraction/evaporation technique followed by casting of the cake into rods in a heated surface. XRD patterns showed that cyclosporine-A was completely incorporated into PLGA. FTIR and DSC results indicated alterations on drug molecular conformation aiming to reach the most stable thermodynamic conformation at polymer/drug interface. Implants provided controlled/sustained in vitro release of the drug. During the first 7 weeks, the drug release was controlled by the diffusion of the cyclosporine-A; and between 7-23 week period, the drug diffusion and degradation of PLGA controlled the drug release.

Ultrafiltration membranes from waste polyethylene terephthalate and additives: synthesis and characterization

The synthesis and characterization of asymmetric ultrafiltration membranes from recycled polyethylene terephthalate (PET) and polyvinylpyrrolidone (PVP) is reported. PET is currently used in many applications, including the manufacture of bottles and tableware. Monomer extraction from waste PET is expensive, and this process has not yet been successfully demonstrated on a viable scale. Hence, any method to recycle or regenerate PET once it has been used is of significant importance from scientific and environmental research viewpoints. Such a process would be a green alternative due to reduced raw monomer consumption and the additional benefit of reduced manufacturing costs. The membranes described here were prepared by a phase-inversion process, which involved casting a solution containing PET, m-cresol as solvent, and polyethylene glycol (PEG) of different molecular weights as additives. The membranes were characterized in terms of pure water permeability (PWP), molecular weight cut-off (MWCO), and flux and membrane morphology. The results show that the addition of PEG with high molecular weights leads to membranes with higher PWP. The presence of additives affects surface roughness and membrane morphology.