Determination of nicotine and nicotine metabolites in urine by hydrophilic interaction chromatography-tandem mass spectrometry: Potential use of smokeless tobacco products by ice hockey players.

Consumption of nicotine in the form of smokeless tobacco (snus, snuff, chewing tobacco) or nicotine-containing medication (gum, patch) may benefit sport practice. Indeed, use of snus seems to be a growing trend and investigating nicotine consumption amongst professional athletes is of major interest to sport authorities. Thus, a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the detection and quantification of nicotine and its principal metabolites cotinine, trans-3-hydroxycotinine, nicotine-N'-oxide and cotinine-N-oxide in urine was developed. Sample preparation was performed by liquid-liquid extraction followed by hydrophilic interaction chromatography-tandem mass spectrometry (HILIC-MS/MS) operated in electrospray positive ionization (ESI) mode with selective reaction monitoring (SRM) data acquisition. The method was validated and calibration curves were linear over the selected concentration ranges of 10-10,000 ng/mL for nicotine, cotinine, trans-3-hydroxycotinine and 10-5000 ng/mL for nicotine-N'-oxide and cotinine-N-oxide, with calculated coefficients of determination (R(2)) greater than 0.95. The total extraction efficiency (%) was concentration dependent and ranged between 70.4 and 100.4%. The lower limit of quantification (LLOQ) for all analytes was 10 ng/mL. Repeatability and intermediate precision were ?9.4 and ?9.9%, respectively. In order to measure the prevalence of nicotine exposure during the 2009 Ice Hockey World Championships, 72 samples were collected and analyzed after the minimum of 3 months storage period and complete removal of identification means as required by the 2009 International Standards for Laboratories (ISL). Nicotine and/or metabolites were detected in every urine sample, while concentration measurements indicated an exposure within the last 3 days for eight specimens out of ten. Concentrations of nicotine, cotinine, trans-3-hydroxycotinine, nicotine-N'-oxide and cotinine-N-oxide were found to range between 11 and 19,750, 13 and 10,475, 10 and 8217, 11 and 3396, and 13 and 1640 ng/mL, respectively. When proposing conservative concentration limits for nicotine consumption prior and/or during the games (50 ng/mL for nicotine, cotinine and trans-3-hydroxycotinine and 25 ng/mL for nicotine-N'-oxide and cotinine-N-oxide), about half of the hockey players were qualified as consumers. These findings significantly support the likelihood of extensive smokeless nicotine consumption. However, since such conclusions can only be hypothesized, the potential use of smokeless tobacco as a doping agent in ice hockey requires further investigation.

Chemical products : basic guide on labelling and safety data sheets

Hazardous chemical products have to comply with, amongst others, the provisions of a correct classification of danger, labelling and compilation of the safety data sheets. The aim is to protect people's health and the environment from exposure to hazardous chemicals- especially the health and safety of direct users, professionals or not, and the general public, via environmental exposure. This publication is intended to contribute to the knowledge of the objectives and basic aspects of these legal provisions, and thereby increase their degree of compliance in Andalusia and other european regions. This Guide is directed toward those people who, in the development of their professional activities, are in one way or another in contact with dangerous chemical products.

Chemical products : basic guide on labelling and safety data sheets

Hazardous chemical products have to comply with, amongst others, the provisions of a correct classification of danger, labelling and compilation of the safety data sheets. The aim is to protect people's health and the environment from exposure to hazardous chemicals- especially the health and safety of direct users, professionals or not, and the general public, via environmental exposure. This publication is intended to contribute to the knowledge of the objectives and basic aspects of these legal provisions, and thereby increase their degree of compliance in Andalusia and other european regions. This Guide is directed toward those people who, in the development of their professional activities, are in one way or another in contact with dangerous chemical products.

On spectral approximation, Folner sequences and crossed products

In this article we review first some of the possibilities in which the notions of Fo lner sequences and quasidiagonality have been applied to spectral approximation problems. We construct then a canonical Fo lner sequence for the crossed product of a concrete C* -algebra and a discrete amenable group. We apply our results to the rotation algebra (which contains interesting operators like almost Mathieu operators or periodic magnetic Schrödinger operators on graphs) and the C* -algebra generated by bounded Jacobi operators.

Therapeutic switching: from antidermatophytic essential oils to new leishmanicidal products

This study examined whether the antidermatophytic activity of essential oils (EOs) can be used as an indicator for the discovery of active natural products against Leishmania amazonensis. The aerial parts of seven plants were hydrodistilled. Using broth microdilution techniques, the obtained EOs were tested against three strains of dermatophytes (Trichophyton mentagrophytes, Microsporum gypseum and Microsporum canis). To compare the EOs antifungal and antiparasitic effects, the EOs activities against axenic amastigotes of L. amazonensis were concurrently evaluated. For the most promising EOs, their antileishmanial activities against parasites infecting peritoneal macrophages of BALB/c mice were measured. The most interesting antifungal candidates were the EOs from Cymbopogon citratus, Otacanthus azureus and Protium heptaphyllum, whereas O. azureus, Piper hispidum and P. heptaphyllum EOs exhibited the lowest 50% inhibitory concentration (IC50) values against axenic amastigotes, thus revealing a certain correspondence between both activities. The P. hispidum EO was identified as the most promising product in the results from the infected macrophages model (IC50: 4.7 µg/mL, safety index: 8). The most abundant compounds found in this EO were sesquiterpenes, notably curzerene and furanodiene. Eventually, the evaluation of the antidermatophytic activity of EOs appears to be an efficient method for identifying new potential drugs for the treatment of L. amazonensis.

Molecular and immunological evaluation of the expression of cancer/testis gene products in human colorectal cancer.

Tumor-specific gene products, such as cancer/testis (CT) antigens, constitute promising targets for the development of T cell vaccines. Whereas CT antigens are frequently expressed in melanoma, their expression in colorectal cancers (CRC) remains poorly characterized. Here, we have studied the expression of the CT antigens MAGE-A3, MAGE-A4, MAGE-A10, NY-ESO-1 and SSX2 in CRC because of the presence of well-described HLA-A2-restricted epitopes in their sequences. Our analyses of 41 primary CRC and 14 metastatic liver lesions confirmed the low frequency of expression of these CT antigens. No increased expression frequencies were observed in metastatic tumors compared to primary tumors. Histological analyses of CRC samples revealed heterogeneous expression of individual CT antigens. Finally, evidence of a naturally acquired CT antigen-specific CD8(+) T cell response could be demonstrated. These results show that the expression of CT antigens in a subset of CRC patients induces readily detectable T cell responses.

The association between need for touch and desire for unique products and consumer (inter)dependent problem-solving

Some people cannot buy products without first touching them, believing that doing so will create more assurance and information and reduce uncertainty. The international consumer marketing literature suggests an instrument to measure consumers' necessity for pohysical contact, called Need for Touch (NFT). This paper analyzes whether the Need for Touch structure is empirically consistent. Based on a literature review, we suggest six hypotheses in order to assess the nomological, convergent, and discriminant validity of the phenomenon. Departing from these, data supported four assumptions in the predicted direction. Need for Touch was associated with Need for Input and with Need for Cognition. Need for Touch was not associated with traditional marketing channels. The results also showed the dual characterization of Need for Touch as a bi-dimensional construct. The moderator effect indicated that when the consumer has a higher (vs. lower) Need for Touch autotelic score, the experiential motivation for shopping played a more (vs. less) important role in impulsive motivation. Our Study 3 supports the NFT structure and shows new associations with the need for unique products and dependent decisions.

Disseny dels elements constitutius per adaptar un centre de mecanitzat de control numèric a la tecnologia Incremental Sheet Forming (ISF)

Un dels processos tradicionals de conformació de xapa més utilitzats a nivell industrial, degut a la seva rapidesa d’operació i la seva maduresa del procés, és l’embotició. Per a dur a terme aquest procés és necessària la construcció d’uns utillatges (matriu i punxó) per a cada tipus de producte. Aquests utillatges estan fabricats amb materials altament resistents ja que han de poder suportar càrregues molt importants durant la deformació. A més, s’han de garantir unes precisions dimensionals molt bones per tal d’evitar el xoc entre les dues parts de l’utillatge i per a assegurar que la peça obtinguda tingui les dimensions desitjades. Aquest fet implica que el procés d’obtenció de les matrius i punxons tingui un cost molt elevat i per a amortitzar-lo és necessari que la producció sigui en massa.L’objecte d’aquest projecte és adaptar el centre de mecanitzat Kondia HS1000 per tal de poder dur a terme recerca bàsica de la tecnologia de conformat incremental de xapa (ISF) en el Grup de Recerca en Enginyeria del Producte, Procés i Producció (GREP)

Adequació de la infraestructura de l'Hospital Universitari Arnau de Vilanova per a la implantació de S.A.P. (System Application & Products)

En aquesta memòria s'explica com, per la implantació de SAP en l'Hospital Universitari Arnau de Vilanova s'ha de realitzar una adequació tant de xarxa, com de parc d'ordinadors i impressores, instal·lació d'un nou cpd. Es fa un anàlisi previ de la situació i s'expliqen quins canvis es fan i perquè.

Products and Services Purchased From Iowa Prison Industries, Iowa Departation of Transportation, October 29, 2002

Items purchased from Iowa Prison Industries for Iowa Departation of Transportation

Plataforma e-commerce Magento, millora de la importació massiva de productes

Aquest projecte tracta de la millora de l’actual sistema d’importació que disposa Magento. Actualment per importar els productes a una botiga Magento es necessita treballar amb un fitxer csv on s’introdueix una gran quantitat de dades i requereix una gran quantitat de temps i esforç per part de l’empresa. Per millorar l’actual sistema, es proposa crear una integració entre Magento i Google Docs, fent que tots els productes que es vulguin importar s’introdueixin en un full de càlcul Google Docs i s’importin a la botiga Magento.

Steel Diaphragms in Prestressed Concrete Girder Bridges, September 2004

Over the years, bridge engineers have been concerned about the response of prestressed concrete (PC) girder bridges that had been hit by over-height vehicles or vehicle loads. When a bridge is struck by an over-height vehicle or vehicle load, usually the outside and in some instances one of the interior girders are damaged in a bridge. The effect of intermediate diaphragms in providing damage protection to the PC girders of a bridge is not clearly defined. This analytical study focused on the role of intermediate diaphragms in reducing the occurrence of damage in the girders of a PC-girder bridge that has been struck by an over-height vehicle or vehicle load. The study also investigated whether a steel, intermediate diaphragm would essentially provide the same degree of impact protection for PC girders as that provided by a reinforced-concrete diaphragm. This investigation includes the following: a literature search and a survey questionnaire to determine the state-of-the-art in the use and design of intermediate diaphragms in PC-girder bridges. Comparisons were made between the strain and displacement results that were experimentally measured for a large-scale, laboratory, model bridge during previously documented work and those results that were obtained from analyses of the finite-element models that were developed during this research for that bridge. These comparisons were conducted to calibrate the finite element models used in the analyses for this research on intermediate diaphragms. Finite-element models were developed for non-skewed and skewed PC-girder bridges. Each model was analyzed with either a reinforced concrete or two types of steel, intermediate diaphragms that were located at mid-span of an interior span for a PC-girder bridge. The bridge models were analyzed for lateral-impact loads that were applied to the bottom flange of the exterior girders at the diaphragms location and away from the diaphragms location. A comparison was conducted between the strains and displacements induced in the girders for each intermediate-diaphragm type. These results showed that intermediate diaphragms have an effect in reducing impact damage to the PC girders. When the lateral impact-load was applied at the diaphragm location, the reinforced-concrete diaphragms provided more protection for the girders than that provided by the two types of steel diaphragms. The three types of diaphragms provided essentially the same degree of protection to the impacted, PC girder when the lateral-impact load was applied away from the diaphragm location.

Labeling Regulations and Segregation of First- and, Second-Generation Genetically Modified Products: Innovation Incentives and Welfare Effects, April 2005

We review some of the most significant issues and results on the economic effects of genetically modified (GM) product innovation, with emphasis on the question of GM labeling and the need for costly segregation and identity preservation activities. The analysis is organized around an explicit model that can accommodate the features of both first-generation and second-generation GM products. The model accounts for the proprietary nature of GM innovations and for the critical role of consumer preferences vis-à-vis GM products, as well as for the impacts of segregation and identity preservation and the effects of a mandatory GM labeling regulation. We also investigate briefly a novel question in this setting, the choice of “research direction”when both cost-reducing and quality-enhancing GM innovations are feasible.