Geologia do alvo e da mina Sol Nascente, município de Rio Crespo, Rondônia

Eight Mesoproterozoic granite suites are recognized in the Rondônia Tin Province, called Serra da Providência Intrusive Suite (1606-1532 Ma), Rio Crespo Intrusive Suite (1500 Ma), St. Anthony Intrusive Suite (1406 Ma), Teotonio Intrusive Suite (1387 Ma ), Santa Clara Intrusive Suite (1082-1074 Ma) and Younger Granites of Rondônia Intrusive Suite (998-974 Ma), represent successive magmatic type A (anorogenic) and the intra-plate basement rocks intruded in the metamorphic complex named Jamari separated into two distinct lithologic associations, a ortogneiss (U-Pb from 1.76 to 1.73 Ga) and a paragneiss (1675 + / - 12 Ma). Tin mineralization are widely found in the Tin Province and are associated with granitic intrusions known Mesoproterozoic more closely with the last two magmatic events, represented by the Santa Clara and Younger Granites of Rondônia. The tin mineralization are of primary and secondary, with the primary form deposits of different structural styles and is presented in the form of endo-or exogreisens, veins, stockworks and pegmatites. The secondary mineralization are related to natural processes of weathering and erosion of primary rocks, leading to placer deposits classified as colluvial, eluvial and colluvial-alluvial. The Target Alvo Sol Nascente is located in the central-eastern Rondônia Tin Province and has basement rocks of the metamorphic-magmatic region represented by Jamari Complex intrusive suites and Sierra Providence and Rio Crespo. The last tectonic event spa in the area was responsible for the intrusion of Younger Granites of Rondônia (São Carlos and Caripuanã Massifis). The anomalous levels of tin, sufficient to operate (Mina Rising Sun), indicate that there was possibly mineralization event, evidenced by pegmatite veins well defined, easily found relatively close to mine. Plaque deposits associated with Quaternary sedimentary sequences can also be observed

Electrical properties of highly conducting Sno2:Sb nanocrystals synthesized using a nonaqueous sol gel method

This work describes the synthesis of highly conducting antimony-doped tin oxide (ATO) nanocrystals prepared via a nonaqueous sol–gel route in the size range of 4–6 nm and provides insights into its electrical properties. The antimony composition was varied from 1 to 18 mol% and the lowest resistivity (4.0 × 10−4Ω·cm) was observed at room temperature in the SnO2:8.8 mol% Sb composition. The samples were evaluated by X-ray diffraction, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscope, and resistivity measurements were taken in the four-probe mode in the temperature range of 13–300 K. The results show highly crystalline nanoparticles in a monodisperse colloidal system, dependence on the shape of ATO nanoparticles as a function of Sb distribution, low resistivity, and semiconductor–metal transition.

Irmão Sol, Irmã Lua: gênero, poder e clausura em um mosteiro da Ordem de Santa Clara de Assis - São Paulo

Pós-graduação em Ciências Sociais - FFC

Effect of cryoprotectants on the reconstitution of silica nanoparticles produced by sol-gel technology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Improved electrical transport in lightly Er-doped sol-gel spin-coating SnO2 thin films, processed by photolithography

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Poloxamer-based binary hydrogels for delivering tramadol hydrochloride: sol-gel transition studies, dissolution-release kinetics, in vitro toxicity, and pharmacological evaluation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rietveld refinement and optical properties of SrWO4:Eu3+ powders prepared by the non-hydrolytic sol-gel method

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

All sol-gel electrochromic smart windows: CeO2-TiO 2/Ormolyte/WO3

A solid state system having the configuration WO 3/Ormolyte/CeO2-TiO2 has been assembled. Syntheses routes for tungsten oxide WO3, and cerium-titanium CeO 2-TiO2 oxide sols, were developed. A novel solid electrolyte - Ormolyte is reported, which were obtained by the sol-gel process, they have a chemical stability due to the covalent bonds between the inorganic and organic phase, and were prepared with different [O]/[L] ratios, being the best for [O]/[L]=15. The variation of transmittance of the electrochromic device using the ormolyte [O]/[L]=15 was 35% (colored state) and 77% (bleached state).

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Efeito da infiltração de sílica pelo método sol-gel na resistência à flexão de bicamadas de porcelana e Y-TZP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparação e caracterização óptica de filmes de ORMOSIL obtidos via processo sol-gel dopados com azocorantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades elétricas de materiais híbridos de Sílica/orgânico à base de GPTS/TEOS preparados pelo método sol-gel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aluminas macro-mesoporosas produzidas pelo método sol-gel para aplicação em catálise heterogênea

Pós-graduação em Química - IQ

Hino à Unesp: versão para coro e orquestra de câmara, em Sol maior

Este hino foi composto para as comemorações do Jubileu de Prata (25 anos) da Unesp em 2001. Edmundo Villani-Cortes, então professor de Composição do Instituto de Artes, campus de São Paulo, escreveu a música e o então aluno de graduação no curso de Bacharelado em Música com habilitação em Composição e Regência, Julio Bellodi, a convite dele, escreveu a letra. A obra, interpretada pela Orquestra de Câmara da Unesp, teve sua estreia em 3 de dezembro daquele ano.

Desenvolvimento inicial de um reflorestamento de guanandi (Calophyllum brasiliense Cambess. Calophyllaceae) em sistema de plantio sombreado e a pleno sol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)