Gráficos de T² para o monitoramento de processos multivariados autocorrelacionados

In which refers to statistical process control, the analysis of univariate cases is not enough for many types of company, being necessary to resort to multivariate cases. Besides, it is usually supposed that the observations are independent. However, the violation of this hypothesis indicates the existence of autocorrelation in the process. In this work, by a basic quantitative approach for an exploratory and experimental research, the study target are the multivariate autocorrelated control charts, using Hotteling T². The ARL values were collected by simulations of a computational program on FORTRAN language, with objective of studying the charts properties, in addition to compare with the

Preface to Lesser Known Large dsDNA Viruses. Current Topics in Microbiology and Immunology 328

Several large dsDNA-containing viruses such as poxviruses (smallpox) and herpes viruses are well known among the scientific community, as well as the general populace, because they cause human diseases. The large dsDNA insect-infecting baculoviruses are also well known in the scientific community because they are used both as biological control agents and as protein expression systems. However, there are other large dsDNA-containing viruses, including the giant 1.2-Mb mimivirus, which are less well known even though all of them play important roles in everyday life. Seven of these virus families are reviewed in this book.

Review of issues concerning the use of reproductive inhibitors, with particular emphasis on resolving human-wildlife conflicts in North America

This manuscript provides an overview of past wildlife contraception efforts and discusses the current state of research. Two fertility control agents, an avian reproductive inhibitor containing the active ingredient nicarbazin and an immunocontraceptive vaccine, have received regulatory approval with the Environmental Protection Agency and are commercially available in the USA. OvoControl G Contraceptive Bait for Canada Geese and Ovo Control for pigeons are delivered as oral baits. An injectable immunocontraceptive vaccine (GonaCon Immunocontraceptive Vaccine) was registered with the Environmental Protection Agency for use in female white-tailed deer in September 2009. An injectable product (GonaCon Immunocontraceptive Vaccine) is registered for use in female white-tailed deer. Both products are labeled for use in urban/suburban areas where these species are overabundant. Several other compounds are currently being tested for use in wildlife in the USA, Europe, Australia and New Zealand that could have promise in the future. The development and use of reproductive inhibitors for resolving human–wildlife conflicts will depend on a number of factors, including meeting the requirements of regulatory agencies for use in the environment and on the biological and economical feasibility of their use. Use will also be dependent on health and safety issues and on public acceptance of the techniques.

Gráficos de T² para o monitoramento de processos multivariados autocorrelacionados

In which refers to statistical process control, the analysis of univariate cases is not enough for many types of company, being necessary to resort to multivariate cases. Besides, it is usually supposed that the observations are independent. However, the violation of this hypothesis indicates the existence of autocorrelation in the process. In this work, by a basic quantitative approach for an exploratory and experimental research, the study target are the multivariate autocorrelated control charts, using Hotteling T². The ARL values were collected by simulations of a computational program on FORTRAN language, with objective of studying the charts properties, in addition to compare with the

Detecting an abnormality in a recovery boiler using dynamic multivariate data analysis with parallel coordinate plots

Data visualization techniques are powerful in the handling and analysis of multivariate systems. One such technique known as parallel coordinates was used to support the diagnosis of an event, detected by a neural network-based monitoring system, in a boiler at a Brazilian Kraft pulp mill. Its attractiveness is the possibility of the visualization of several variables simultaneously. The diagnostic procedure was carried out step-by-step going through exploratory, explanatory, confirmatory, and communicative goals. This tool allowed the visualization of the boiler dynamics in an easier way, compared to commonly used univariate trend plots. In addition it facilitated analysis of other aspects, namely relationships among process variables, distinct modes of operation and discrepant data. The whole analysis revealed firstly that the period involving the detected event was associated with a transition between two distinct normal modes of operation, and secondly the presence of unusual changes in process variables at this time.

Parasitoids (Braconidae) associated with Anastrepha (Tephritidae) in host fruits on the Southern coast of Bahia, Brazil

Among the organisms acting in the natural biological control of tephritids, members of the family Braconidae are the most active form of natural parasite, and in Neotropical regions, members of Opiinae are the main control agents of Anastrepha. The objective of this work was to discover the percentage of parasitism and the species of braconid associated with fruit trees growing in cities on the southern coast of Bahia. During the period of August, 2005 to March, 2008, hosts fruits of fruit flies from several plant species were collected and from the fruits the following species of Anastrepha were obtained: A. fraterculus, A. obliqua, A. bahiensis, A. serpentina, A. sororcula and A. zenildae. Of the total of 838 specimens of braconids, 21.36% were of the species Utetes anastrephae (Viereck), obtained from yellow mombin, carambola, guava, mango and pitanga; 4.42% were of the species Asobara anastrephae (Muesebeck) obtained from the fruits of the yellow mombin, carambola and guava, and only one example of Opius bellus Gahan (0.12%) that came from a guava sample. The species Doryctobracon areolatus (Szepligeti) (74.10%) was predominant and emerged from puparia from all the host fruits collected, probably due to the greater efficiency of this species in locating tephritid larvae. The mean percentage of parasitism by Anastrepha spp. was 4.45%.

Effect of Nitrogen Ion Implantation on the Flexibility of Rotary Nickel-Titanium Instruments

Introduction: The aim of this study was to assess the effect of nitrogen ion implantation on the flexibility of rotary nickel-titanium (NiTi) instruments as measured by the load required to bend implanted and nonimplanted instruments at a 30 degrees angle. Methods: Thirty K3 files, size #40, 0.02 taper and 25-mm length, were allocated into 2 groups as follows: group A, 15 files exposed to nitrogen ion implantation at a dose of 2.5 x 10(17) ions/cm(2), voltage 200 KeV, current density 1 mu A/cm(2), temperature 130 degrees C, and vacuum conditions of 10 x 10(-6) mm Hg for 6 hours; and group B, 15 nonimplanted files. One extra file was used for process control. All instruments were subjected to bend testing on a modified troptometer, with measurement of the load required for flexure to an angle of 30 degrees. The Mann-Whitney U test was used for statistical analysis. Findings with P <.05 were considered significant. Results: The mean load required to bend instruments at a 30 degrees angle was 376.26 g for implanted instruments and 383.78 g for nonimplanted instruments. The difference was not statistically significant. Conclusions: Our findings show that nitrogen ion implantation has no appreciable effect on the flexibility of NiTi instruments. (J Endod 2012;38:673-675)

An analysis of Taguchi's on-line quality monitoring procedure for variables based on the results of a sequence of inspections

In this paper, a procedure for the on-line process control of variables is proposed. This procedure consists of inspecting the m-th item from every m produced items and deciding, at each inspection, whether the process is out-of-control. Two sets of limits, warning (µ0 ± W) and control (µ0 ± C), are used. If the value of the monitored statistic falls beyond the control limits or if a sequence of h observations falls between the warning limits and the control limits, the production is stopped for adjustment; otherwise, production goes on. The properties of an ergodic Markov chain are used to obtain an expression for the average cost per item. The parameters (the sampling interval m, the widths of the warning, the control limits W and C(W < C), and the sequence length (h) are optimized by minimizing the cost function. A numerical example illustrates the proposed procedure.

Nuove tecniche per l'allevamento massale di Ditteri del genere Coenosia Meigen

The species of the genus Coenosia Meigen are polyphagous predators both in the larval and in the adult stage. In Europe five Coenosia species of the ‘tigrina group’ are naturally present in greenhouses, where they can establish for long periods. As their wide preys range includes important pests of protected crops, as Aleyrodidae, Sciaridae and Agromyzidae, Coenosia species are considered promising potential biological control agents. A method for rearing Coenosia species in vivo was developed for the first time in 1993 in Germany, where C. attenuata, C. strigipes and C. humilis were bred on Bradysia paupera (Diptera Sciaridae), reared on Fusarium spp. cultivated on wood fibre. Although this method was partially simplified afterwards, it is still too complex and expensive for a mass production. This research aimed at simplifying this rearing procedure and making it cheaper, in the perspective of an eventual mass production. Studies on potential preys were conducted, to determine their suitability for C. attenuata larvae and adults and to develop rearing methods. Biology and rearing methods of Bradysia paupera Tuomikoski, Scatella stagnalis Fallén and Drosophila melanogaster Meigen (Diptera: Sciaridae, Ephydridae, Drosophilidae) were compared. B. paupera resulted the most suitable prey for rearing C. attenuata in vivo. The Sciarid fly was effectively reared on damp coconut fibre with fresh Agaricus bisporus (J.E. Lange) Pilát, thus simplifying the existing method. After preliminary trials with different potential preys, attempts to rear C. attenuata in vivo on B. paupera and D. melanogaster were made. The best results were obtained with B. paupera, reared on coconut fibre and A. bisporus, but the method needs further improvement. Trials of in vitro rearing of C. attenuata were also made: as no specific diet for Coenosia species is reported in literature, different potentially suitable media were tested. Among these, a specific diet for Diptera Tachinidae resulted a good starting point for further studies and improvements. The biology of C. attenuata adults captured in greenhouses was also studied, by observing both groups and isolated individuals. Data on lifespan, daily number of preys per adult, daily number of laid eggs and hatching rate were recorded, and the effects of different foods on these parameters were analyzed. The following foods were compared: D. melanogaster adults only, as preys for C. attenuata; D. melanogaster adults and a water-honey solution; the water-honey solution only. Honey resulted an effective food integration for C. attenuata, increasing lifespan and the number of egg laying females. It is possible that in greenhouses Coenosia adults complete the preys diet with nectar and/or honeydew. Moreover, the integration with honey reduced the daily preys consumption. This may allow to prevent cannibalism among Coenosia adults in the rearing conditions, where high population densities are required. A survey of the Coenosia species naturally present in Lombardy greenhouses was conducted. The species C. attenuata, C. strigipes, C. tigrina and C. atra were detected. C. attenuata resulted the most common, recorded in most greenhouses and for consecutive years. Besides, the presence of potential preys, weeds and the crops were recorded in each greenhouse. Nevertheless, it is difficult to determine the relation between these parameters and the presence of Coenosia species.

In situ real-time investigation of Organic Ultra-Thin-Film transistors: growth, electrical properties and biosensing applications

Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.

Use of essential oils and biocontrol cultures for the improvement of shelf-life of fresh cut products

The demand of minimally processed fruits and vegetables has increased in the last years. However, their intrinsic characteristics may favor the growth of pathogens and spoilage microbiota. The negative effects on human health reported for some traditional chemical sanitizers have justified the search for substitutes to guarantee food safety and quality. In this work we have evaluate the potential of some essential oils and their components to improve the safety and the shelf life of Lamb’s lettuce (Valerianella locusta) and apples (Golden delicious). Moreover, the effects of selected lactic acid bacteria alone or in combination with essential oils or their components, on the shelf-life and safety as well as organoleptic properties of minimally processed products, were evaluated. Since the lack of knowledge of microbial cell targets of essential oils represent one of the most important limit to the use of these molecules at industrial level, another aim of this thesis was the study of the action mechanisms of essential oils and their components. The results obtained showed the beneficial effects of the natural antimicrobials as well as the selected lactic acid bacteria on minimally processed fruit and vegetable safety and shelf-life, without detrimental effects on the quality parameters. The beneficial effects obtained by the use of the selected biocontrol agents were further increased combining them with selected natural antimicrobials. The natural antimicrobial employed induced noticeable modifications of membrane fatty acid profiles and volatile compounds produced by microbial cells during the growth. The modification of the expression in genes involved in fatty acid biosynthesis suggesting that the cytoplasmic membrane of microbial cells is one of the major cellular target of essential oils and their components. The comprehension of microbial stress response mechanisms can contribute to the scaling up of natural antimicrobials and bio-control agents at industrial level.

Diversity of baculoviruses isolated from cutworms (Agrotis spp.)

Larven der Eulenfalter, Gattung Agrotis (Lepidoptera: Noctuidae), sind Schädlinge in der Landwirtschaft, welche gravierende Fraßschäden an bodennahen Pflanzenteilen verursachen. Häufig kommt es zum Absterben der noch jungen Pflanzen oder zu Beschädigungen der pflanzlichen Produkte, was zu finanziellen Ertragsverlusten führt. Zwei der wichtigsten landwirtschaftlichen Schädlinge der Gattung Agrotis sind die Larven der Saateule (Agrotis segetum) und der Ypsiloneule (Agrotis ipsilon), welche bisher überwiegend mittels chemischer Pestizide bekämpft werden. Als eine umweltfreundliche, nachhaltige und vielversprechende Alternative in der Bekämpfung wird der Einsatz von Baculoviren berücksichtigt. Baculoviren zeichnen sich durch eine hohe Virulenz und einem sehr engen Wirtsbereich aus. Häufig werden nur wenige nah verwandte Arten der gleichen Gattung infiziert. Aus der Gattung Agrotis wurden bisher mindestens vier Baculoviren isoliert und charakterisiert, welche als potentielle biologische Pflanzenschutzmittel in Frage kommen; sie gehören zu zwei Gattungen der Baculoviren: rnAlphabaculovirusrn(i) Agrotis segetum nucleopolyhedrovirus A (AgseNPV-A)rn(ii) Agrotis segetum nucleopolyhedrovirus B (AgseNPV-B)rn(iii) Agrotis ipsilon nucleopolyhedrovirus (AgipNPV)rnBetabaculovirusrn(i) Agrotis segetum granulovirus (AgseGV).rnDie Genome der AgseNPV-A, AgipNPV sowie des AgseGV wurden in vorherigen Studien bereits vollständig sequenziert und publiziert. In der vorgelegten Dissertation wurde das AgseNPV-B sequenziert und umfassend mit AgseNPV-A und AgipNPV verglichen. Das Genom von AgseNPV-B ist 148981 Kbp groß und kodiert ….. offene Leseraster. Phylogenetische Analysen zeigen eine enge Verwandtschaft dieser drei Viren und klassifizieren AgseNPV-B als eine neue Art innerhalb der Gattung Alphabaculovirus. Auf Basis der vorhandenen Genomsequenzen konnte eine PCR-basierende Methode zur Detektion und Quantifizierung on AgseNPV-A, AgseNPV-B, AgipNPV und AgseGV etabliert werden. Dises Verfahren ermöglichte die Quantifizierung von AgseNPV-B und AgseGV in Larven von A. segetum, die von beiden Viren zeitgleichinfiziert waren. Durch das gemeinsame Auftreten dieser beiden Wiren innerhalb eines Wirtsindividuums stellte sich die Frage, welche Art der Interaktion bei einer Ko-Infektion vorliegt. Durch Mischinfektionsversuche von AgseNPV-B und AgseGV konnte gezeigt werden, dass beide Viren um die Ressourcen der Larven konkurrieren. Eine für landwirtschaftliche Zwecke vorteilige Interaktion, wie das vorzeitige Verenden der Larven, das bereits für andere interagierende Baculoviren nachgewiesen wurde, konnte ausgeschlossen werden. Neben den Mischinfektionsversuchen wurden auch AgseGV und AgseNPV-B einzeln auf ihre Eignung als biologisches Pflanzenschutzmittel getestet. AgseGV zeigte in den Laborversuchen eine relativ langsame Wirkung, während AgseNPV-B durchaus Potential für ein rasche Abtötung besitzt. rnDie durchgeführten Aktivitätsstudien und die Charakterisierung von AgseNPV-B als neue Art erlauben ein vertieftes biologisches und molekulares Verständnis des Virus legen den Grundstein für und eine mögliche spätere Zulassung als Pflanzenschutzmittel. Die Methode zur Identifizierung und Quantifizierung der Agrotis-Baculoviren stellt ein wichtiges Instrument in der Qualitätskontrolle für Produzenten dar und ermöglicht zudem weitere Untersuchungen von Agrotis-Baculoviren in Mischinfektionen.

High-throughput procedure for tick surveys of tick-borne encephalitis virus and its application in a national surveillance study in Switzerland

Tick-borne encephalitis (TBE), a viral infection of the central nervous system, is endemic in many Eurasian countries. In Switzerland, TBE risk areas have been characterized by geographic mapping of clinical cases. Since mass vaccination should significantly decrease the number of TBE cases, alternative methods for exposure risk assessment are required. We established a new PCR-based test for the detection of TBE virus (TBEV) in ticks. The protocol involves an automated, high-throughput nucleic acid extraction method (QIAsymphony SP system) and a one-step duplex real-time reverse transcription-PCR (RT-PCR) assay for the detection of European subtype TBEV, including an internal process control. High usability, reproducibility, and equivalent performance for virus concentrations down to 5 x 10(3) viral genome equivalents/microl favor the automated protocol compared to the modified guanidinium thiocyanate-phenol-chloroform extraction procedure. The real-time RT-PCR allows fast, sensitive (limit of detection, 10 RNA copies/microl), and specific (no false-positive test results for other TBEV subtypes, other flaviviruses, or other tick-transmitted pathogens) detection of European subtype TBEV. The new detection method was applied in a national surveillance study, in which 62,343 Ixodes ricinus ticks were screened for the presence of TBE virus. A total of 38 foci of endemicity could be identified, with a mean virus prevalence of 0.46%. The foci do not fully agree with those defined by disease mapping. Therefore, the proposed molecular test procedure constitutes a prerequisite for an appropriate TBE surveillance. Our data are a unique complement of human TBE disease case mapping in Switzerland.

Nano-engineering of composite material via reactive mechanical alloying/milling (RMA/M)

Attempts to strengthen a chromium-modified titanium trialuminide by a combination of grain size refinement and dispersoid strengthening led to a new means to synthesize such materials. This Reactive Mechanical Alloying/Milling process uses in situ reactions between the metallic powders and elements from a process control agent and/or a gaseous environment to assemble a dispersed small hard particle phase within the matrix by a bottom-up approach. In the current research milled powders of the trialuminide alloy along with titanium carbide were produced. The amount of the carbide can be varied widely with simple processing changes and in this case the milling process created trialuminide grain sizes and carbide particles that are the smallest known from such a process. Characterization of these materials required the development of x-ray diffraction means to determine particle sizes by deconvoluting and synthesizing components of the complex multiphase diffraction patterns and to carry out whole pattern analysis to analyze the diffuse scattering that developed from larger than usual highly defective grain boundary regions. These identified regions provide an important mass transport capability in the processing and not only facilitate the alloy development, but add to the understanding of the mechanical alloying process. Consolidation of the milled powder that consisted of small crystallites of the alloy and dispersed carbide particles two nanometers in size formed a unique, somewhat coarsened, microstructure producing an ultra-high strength solid material composed of the chromium-modified titanium trialuminide alloy matrix with small platelets of the complex carbides Ti2AlC and Ti3AlC2. This synthesis process provides the unique ability to nano-engineer a wide variety of composite materials, or special alloys, and has shown the ability to be extended to a wide variety of metallic materials.

No surgical innovation without evaluation: the IDEAL recommendations

Surgery and other invasive therapies are complex interventions, the assessment of which is challenged by factors that depend on operator, team, and setting, such as learning curves, quality variations, and perception of equipoise. We propose recommendations for the assessment of surgery based on a five-stage description of the surgical development process. We also encourage the widespread use of prospective databases and registries. Reports of new techniques should be registered as a professional duty, anonymously if necessary when outcomes are adverse. Case series studies should be replaced by prospective development studies for early technical modifications and by prospective research databases for later pre-trial evaluation. Protocols for these studies should be registered publicly. Statistical process control techniques can be useful in both early and late assessment. Randomised trials should be used whenever possible to investigate efficacy, but adequate pre-trial data are essential to allow power calculations, clarify the definition and indications of the intervention, and develop quality measures. Difficulties in doing randomised clinical trials should be addressed by measures to evaluate learning curves and alleviate equipoise problems. Alternative prospective designs, such as interrupted time series studies, should be used when randomised trials are not feasible. Established procedures should be monitored with prospective databases to analyse outcome variations and to identify late and rare events. Achievement of improved design, conduct, and reporting of surgical research will need concerted action by editors, funders of health care and research, regulatory bodies, and professional societies.