Homogenous implant in rat tibias of matrix preserved in 98% glycerin: histomorphologic study.

As a chemical medium for preservation of tissues, glycerin has shown good results because it maintains the cellular integrity despite the tissue dehydration it causes. Taking advantage of the osteoinducing properties of the osseous matrix and glycerin as a proper medium for tissue preservation, osseous matrix was implanted in rat tibias. Twenty-four rats were used, each receiving two surgical wounds. In one of the wounds an osseous matrix preserved in 98% glycerin was implanted and the other received a matrix without preservatives. Six animals were sacrificed on days 10, 20, 30 and 60 post-implant. After routine histological processing, the specimens were stained in hematoxylin-eosin and Masson's trichrome. The results showed that the matrixes preserved in glycerin presented faster resorption with replacement by newly formed tissue.

Protein Deficiency Attenuates the Effects of Alloxan on Insulin Secretion and Glucose Homeostasis in Rats

We have investigated the effect of alloxan on insulin secretion and glucose homeostasis in rats maintained on a 17% protein (normal protein, NP) or 6% protein (low protein, LP) diet from weaning (21 days old) to adulthood (90 days old). The incidence of alloxan diabetes was higher in the NP (3.5 times) than in the LP group. During an oral glucose tolerance test, the area under serum glucose curve was lower in LP (57%) than in NP rats while there were no differences between the two groups in the area under serum insulin curve. The serum glucose disappearance rate (Kitt) after exogenous insulin administration was higher in LP (50%) than in NP rats. In pancreatic islets isolated from rats not injected with alloxan, acute exposure to alloxan (0.05 mmol/L) reduced the glucose- or arginine-stimulated insulin secretion of NP islets by 78% and 56%, respectively, whereas for islets from LP rats, the reduction was 47% and 17% in the presence of glucose and arginine, respectively. Alloxan treatment reduced the glucose oxidation in islets from LP rats to a lesser extent than in NP islets (23% vs. 56%). In conclusion, alloxan was less effective in producing hyperglycemia in rats fed a low protein diet than in normal diet rats. This effect is attributable to an increased peripheral sensivity to insulin in addition to a better preservation of glucose oxidation and insulin secretion in islets from rats fed a low protein diet.

Effect of storage of cuttings on the rooting of different cultivars of cut chrysanthemums (Dendranthema grandiflora Tzvelev) for two different seasons

Chrysanthemums are commercially propagated through cuttings. Pre-rooting storage of cuttings in the dark is a common practice among growers and companies that work and trade with chrysanthemum cuttings. Therefore, the maximum storage period for cuttings and differences in tolerance among cultivars has been investigated. Adventitious roots of cuttings can originate in almost any tissue, including the epidermis, stem cortex and pericycle, ray parenchyma, immature xylem and phloem cells, and pith. The aims of this work were to determine the effect of time of cold storage of cuttings (0, 1, 2, 3, 4, 5 and 6 weeks) on the rooting of four cut chrysanthemum cultivars (Super White, Sheena, Dark Orange Reagan and Town Talk) for two seasons of the year (summer and winter), and also to determine the origin of root formation in chrysanthemum cuttings. The study was carried out as a randomized complete block design with 5 replications for each storage treatment. Each plot was comprised of three cuttings that were examined 14 days after the cutting procedure. During the winter, the roots were studied by scanning electron microscopy (SEM) at the Electron Microscope Laboratory. The following conclusions were made: in winter, cold storage affected the rooting of cuttings, mainly after two weeks of storage for all cultivars. The rooting percentage was lower in the winter and the cuttings could be preserved for a shorter period. The source and growth of roots in chrysanthemum cuttings was found to be endogenous. After three days, callus formed in the pericycle and the first emergence of adventitious roots occurred by the fourth day of rooting. During the summer, cold storage could be up to 4 weeks without any problems.

Treatment options for the occlusal surface of first permanent molars

Restorative dentistry has been increasingly concerned with preservation of the dental structure. For that reason, ultraconservative cavity preparations have been performed with air abrasion systems. The aim of this study was to present treatment options for the occlusal surface of first permanent molars with employment of the conventional method and the air abrasion system for accomplishment of the cavity preparation and a composite occlusal matrix for an accurate reproduction of the tooth surface.

Increased implantation and pregnancy rates obtained by placing the tip of the transfer catheter in the central area of the endometrial cavity

The influence of endometrial cavity length (ECL) on implantation and pregnancy rates after 400 embryo transfers was studied prospectively in a population with the indication of IVF/intracytoplasmic sperm injection (ICSI). The tip of the transfer catheter was placed above or below the half point of the ECL in a randomized manner. Two analyses were performed: (i) absolute position (AP); embryo transfers were divided into three groups according to the distance between the end of the fundal endometrial surface and the catheter tip (DTC - distance tip catheter): AP 1 (n = 212), 10-15 mm; AP 2 (n = 158), 16-20 mm; and AP 3 (n = 30), ≥21 mm. (ii) relative position (RP) - embryo transfers were divided into four groups according to their RP [RP = (DTC/ECL) × 100]: RP 1 (n = 23), ≤40%; RP 2 (n = 177), 41-50%; RP 3 (n = 117), 51-60%; and RP 4 (n = 83), ≥61%. Analysis based on relative distance revealed significantly higher implantation and pregnancy rates (P < 0.05) in more central areas of the ECL. However, analysis based on absolute position did not reveal any difference. In conclusion, the present results demonstrated that implantation and pregnancy rates are influenced by the site of embryo transfer, with better results being obtained when the catheter tip is positioned close to the middle area of the endometrial cavity. In this respect, previous analysis of the ECL is the fundamental step in establishing the ideal site for embryo transfers.

Implantation failures: Success of assisted hatching with quarter-laser zona thinning

Implantation failure after IVF is one of the factors associated with a reduced chance of pregnancy for some patients. Assisted hatching methodologies are designed to facilitate the embryo's escape from the zona pellucida, and this strategy has been suggested as a means of improving pregnancy rates in patients with previous implantation failure. The aim of this prospective and randomized study was to evaluate the efficacy of quarter-laser zona thinning assisted hatching (qLZT-AH) in improving the implantation of embryos in patients with previous implantation failure. A total of 150 patients with a history of previous implantation failure were treated with intracytoplasmic sperm injection, and allocated into two groups: group 1, only one previous implantation failure, and group 2, repeated implantation failures. The patients in each group were randomized at the time of embryo transfer into a control group (no qLZT-AH) or experimental group where qLZT-AH was performed. For patients with repeated implantation failures, the implantation rate in those who received laser-thinned embryos was significantly higher (P=0.02) than in those whose embryos were not laser-thinned (10.9 and 2.6% respectively). However, this difference was not observed in patients who presented with only one previous implantation failure. The data demonstrate that qLZT-AH is an effective strategy for improving the implantation of embryos in patients with repeated implantation failures.

An integrated approach to identification and conservation of medicinal plants in the tropical forest - A Brazilian experience

An integrated and interdisciplinary research programme with native medicinal plants from tropical forests has been performed in order to obtain new forest products for sustainable use in regional markets vis-à-vis ecosystem conservation. For the success of this programme ethnopharmacological studies are very important with respect to (i) identification of useful plants including medicinal and aromatic species; (ii) recuperation and preservation of traditional knowledge about native plants; and (iii) identification of potential plants with economic value. The plants are selected with a view to evaluate efficacy and safety (pharmacological and toxicological studies), and phytochemical profile and quality control (phytochemical and chromatographic characterization). These studies are very important to add value to plant products and also to mitigate unscrupulous exploitation of medicinal plants by local communities, since multiple use of plants represents an excellent strategy for sustaining the tropical ecosystem through ex situ and in situ conservation. Thus, conservation of tropical resources is possible in conjunction with improvements in the quality of life of the traditional communities and production of new products with therapeutic, cosmetic and 'cosmeceutic' value. © NIAB 2005.

Biological response of pulps submitted to different capping materials

Pulp capping is a procedure that comprises adequate protection of the pulp tissue exposed to the oral environment, aiming at the preservation of its vitality and functions. This study evaluated the response of the dental pulps of dog teeth to capping with mineral trioxide aggregate (MTA) or calcium hydroxide P.A. For that purpose, 37 teeth were divided into two groups, according to the capping material employed. Two dogs were anesthetized and, after placement of a rubber dam, their pulps were exposed in a standardized manner and protected with the experimental capping materials. The cavities were then sealed with resin-modified glass ionomer cement and restored with composite resin. After sixty days, the animals were killed and the specimens were processed in order to be analyzed with optic microscopy. It was observed that MTA presented a higher success rate compared to calcium hydroxide, presenting a lower occurrence of infection and pulp necrosis.

Glandular dots of Caesalpinia echinata Lam. (Leguminosae): Distribution, structure and ultrastructure

The structure and ultrastructure of immature to fully mature glandular dots in the leaf, floral organs and fruit, and their secretion components were described in Caesalpinia echinata Lam. (Leguminosae) for the first time. Data showed that glandular dots were groups of idioblasts with contents that reacted positively for both lipophilic and hydrophilic substances. Idioblasts originated from successive divisions of the ground meristem cells or mesophyll cells of an ovary of a fertilized flower. Following division, cells enlarged, the cytoplasm became denser and its content became full. No idioblasts were observed after fruit sclerification. Besides these mixed-content idioblasts, some cells in the sepals, petals and mesocarp were found to contain phenolic compounds, which probably represent a kind of constitutive defense mechanism, once the flowers and fruits become highly fitness-valued parts of the plant and can be commonly attacked. The contents of the idioblasts are released as the growth rate of the embryo increases, indicating that the plant probably diverts the precursors of secondary metabolites into the primary metabolism, at this critical time of embryo development.

Decalcification dynamic of dog mineralized tissue by microwaves

The aim of this article is to present the decalcification process dynamic of mineralized tissue in dogs, teeth and jaw, comparing the traditional decalcification method, immersion, and microwave, immersion followed by irradiation using a domestic microwave oven, accompanying the liberation of calcium through spectrophotometer of atomic absorption. It was used as decalcified agent, EDTA solution or nitric acid. The results showed that with the use of nitric acid (5%), after 15 days, the irradiated fragments could be processed for histological analysis, otherwise the tooth not irradiated need to be submerged for 65 days. The EDTA decalcified action was slower than the nitric acid. The histological observations of the irradiated samples showed an excellent preservation of the morphological characteristics, independently of the decalcified agent used. © 2007 Sociedad Chilena de Anatomía.

Microwave-induced fast decalcification of rat bone for electron microscopic analysis: An ultrastructural and cytochemical study

Bone decalcification is a time-consuming process. It takes weeks and preservation of the tissue structure depends on the quality and velocity of the demineralization process. In the present study, a decalcification methodology was adapted using microwaving to accelerate the decalcification of rat bone for electron microscopic analysis. The ultrastructure of the bone decalcified by microwave energy was observed. Wistar rats were perfused with paraformaldehyde and maxillary segments were removed and fixed in glutaraldehyde. Half of specimens were decalcified by conventional treatment with immersion in Warshawsky solution at 4oC during 45 days, and the other half of specimens were placed into the beaker with 20 mL of the Warshawsky solution in ice bath and thereafter submitted to irradiation in a domestic microwave oven (700 maximum power) during 20 s/350 W/±37°C. In the first day, the specimens were irradiated 9 times and stored at 40°C overnight. In the second day, the specimens were irradiated 20 times changing the solution and the ice after each bath. After decalcification, some specimens were postfixed in osmium tetroxide and others in osmium tetroxide and potassium pyroantimonate. The specimens were observed under transmission electron microscopy. The results showed an increase in the decalcification rate in the specimens activated by microwaving and a reduction of total experiment time from 45 days in the conventional method to 48 hours in the microwave-aided method.

An overview of functional and stereological evaluation of spermatogenesis and germ cell transplantation in fish

Although there are almost thirty-thousand species of fish living in a great variety of habitats and utilizing vast reproductive strategies, our knowledge of morphofunctional and quantitative aspects of testis structure and spermatogenesis is still incipient for this group of vertebrates. In this review, we discuss aspects that are important to better understanding of testis structure and function, and of the development of germ cells (GC) during spermatogenesis. To achieve this, we have recently completed a number of studies presenting morphometric and functional data related to the numbers of GC and Sertoli cells (SC) per each type of spermatogenic cyst, the number of spermatogonial generations, the SC efficiency, and the magnitude of GC loss that normally occurs during spermatogenesis. We also investigated SC proliferation and the relationship of this important event to early spermatogenic cysts. The available data strongly suggest that SC proliferation in sexually mature tilapia is the primary factor responsible for the increase in testis size and for determination of the magnitude of sperm production. The influence of temperature on the duration of spermatogenesis in tilapia was also evaluated and we have used this knowledge to deplete endogenous spermatogenesis in this teleost, in order to develop an experimental system for GC transplantation. This exciting technique results in new possibilities for investigation of spermatogenesis and spermatogonial stem cell biology, creating also an entirely new and promising scenario in biotechnology - transgenic animal production and the preservation of the genetic stocks of valuable animals or endangered species. © Springer Science+Business Media B.V. 2008.

Mechanical tillage of degraded mining areas at Jamari national forest (Amazonian forest, Rondônia - BR)

According to the environmental legislation enforced in Brazil and the process of marketing globalization, the commitment of the nations to the preservation of the environment is intensified. By reason of nature's negative responses to its intensive use, awareness then appears from enterprises and agencies about how the anthropic action over the environment needs to be minimized, becoming a challenge: development and sustainability. In this context, the present work made use of the Mechanical tillage of the soil, as a technique to apply, in a large scale, the strategies and methods to recover mined areas that were researched and developed experimentally by researchers on a theme project about the recovering of degraded areas. This work was conducted in the Amazon ecosystem, inside the Jamari National Forest - Rondônia (FLONA do Jamari), in deactivated cassiterite mines. The objectives of this work were to: Develop a computational program capable of managing a database and assist in the selection of machines and preparation methods to execute the operations of topographical reconstitution and tillage of surfaces in areas degraded by the mineral exploitation of cassiterite. Use the program that was developed in the planning of costs and operational development, for the operations required in the strategies for recovering the areas. Analyze the vegetable productivity in the mobilized areas and the quality of the superficial mobilization, making use of indicators and tillage methods. Evaluate, through biological indicators, the efficiency of the recovery strategies and techniques that were mechanized and applied on the location. The results showed that the developed computational program (SGMAD) served the methodological purposes (the analysis of costs and operational capacity) established for the planning and the selection of the tillage machines and methods in the areas of mineral exploitation of cassiterite. The applied methods and quality of the superficial mobilization were significant to the development of leguminous plants in the areas. The use of biological indicators (microbial biomass and enzymatic activity) in the evaluation of the adopted techniques and strategies revealed that the planting of leguminous plants and their posterior incorporation have been promoting gradually positive alterations in some of the analyzed soil/substract parameters. © 2010 WIT Press.

The Brazilian architecture in wood and the confrontations with the questions of the environment

Two discussions are imposed to the designers of wood constructions. The first one deals with the technical knowledge to project and execute buildings; the second one is concerned with the preservation of the environment, use of the wood in a sustainable way. The work presents the tendencies of the wood used in the Brazilian habitation architecture characterizing the used woods; how the construction technical solutions have developed and discusses about the necessity of using the wood in a conscious way, knowing its origin and control, sustainable use of the forests resources. It focalizes, mainly, the search of the designers to harmonize the use of the wood and the preservation of the forest biodiversity, when it deals with the native forest.

In vitro study of shear bond strength in direct bonding of orthodontic molar tubes

Objective: Although direct bonding takes up less clinical time and ensures increased preservation of gingival health, the banding of molar teeth is still widespread nowadays. It would therefore be convenient to devise methods capable of increasing the efficiency of this procedure, notably for teeth subjected to substantial masticatory impact, such as molars. This study was conducted with the purpose of evaluating whether direct bonding would benefit from the application of an additional layer of resin to the occlusal surfaces of the tube/tooth interface. Methods: A sample of 40 mandibular third molars was selected and randomly divided into two groups: Group 1 - Conventional direct bonding, followed by the application of a layer of resin to the occlusal surfaces of the tube/tooth interface, and Group 2 - Conventional direct bonding. Shear bond strength was tested 24 hours after bonding with the aid of a universal testing machine operating at a speed of 0.5mm/min. The results were analyzed using the independent t-test. Results: The shear bond strength tests yielded the following mean values: 17.08 MPa for Group 1 and 12.60 MPa for Group 2. Group 1 showed higher statistically significant shear bond strength than Group 2. Conclusions: The application of an additional layer of resin to the occlusal surfaces of the tube/tooth interface was found to enhance bond strength quality of orthodontic buccal tubes bonded directly to molar teeth.