Heritability and gene-environment interactions for melanocytic nevus density examined in a U.K. adolescent twin study

Risk factors for melanoma include environmental (particularly ultraviolet exposure) and genetic factors. In rare families, susceptibility to melanoma is determined by high penetrance mutations in the genes CDKN2A or CDK4, with more common, less penetrant genes also postulated. A further, potent risk factor for melanoma is the presence of large numbers of melanocytic nevi so that genes controlling nevus phenotype could be such melanoma susceptibility genes. A large Australian study involving twins aged 12 y of predominantly U.K. ancestry showed strong evidence for genetic influence on nevus number and density. We carried out essentially the same study in the U.K. to gain insight into gene-environment interactions for nevi. One hundred and three monozygous (MZ) and 118 dizygous (DZ) twin pairs aged 10-18 y were examined in Yorkshire and Surrey, U.K. Nevus counts were, on average, higher in boys (mean = 98.6) than girls (83.8) (p = 0.009) and higher in Australia (110.4) than in the U.K. (79.2, adjusted to age 12 y, p < 0.0001), and nevus densities were higher on sun-exposed sites (92 per m(2)) than sun-protected sites (58 per m(2)) (p < 0.0001). Correlations in sex and age adjusted nevus density were higher in MZ pairs (0.94, 95% CI 0.92-0.96) than in DZ pairs (0.61, 95%CI 0.49-0.72), were notably similar to those of the Australian study (MZ = 0.94, DZ = 0.60), and were consistent with high heritability (65% in the U.K., 68% in Australia). We conclude that emergence of nevi in adolescents is under strong genetic control, whereas environmental exposures affect the mean number of nevi.

NMR imaging of water sorption into poly(hydroxyethyl methacrylate-co-tetrahydrofurfuryl methacrylate)

The diffusion of water into a series of hydroxyethyl methacrylate, HEMA, copolymers with tetrahydrofurfuryl methacrylate, THFMA, has been studied over a range of copolymer compositions using NMR imaging analyses. For polyHEMA the diffusion was found to be consistent with a Fickian model. The mass diffusion coefficient of water in polyHEMA at 37 degreesC was determined from the profiles of the diffusion front to be 1.5 x 10(-11) m(2) s(-1), which is less than the value based upon mass uptake, 2.0 x 10(-11) m(2) s(-1). The profiles of the water diffusion front obtained from the NMR images showed that stress was induced at the interface between the rubbery and glassy regions which led to formation of small cracks in this region of the glassy matrix of polyHEMA and its copolymers with mole fractions of HEMA greater than 0.6. Water was shown to be able to enter these cracks forming water pools. For copolymers of HEMA and THFMA with mole fractions of HEMA less than 0.6 the absence of cracks was attributed to the ability of the THFMA sequences to undergo stress relaxation by creep.

Free radical copolymerization of methyl methacrylate and allyl acetate Part 2 structure and properties

The structure of the product from the free radical bulk copolymerization of methyl methacrylate (MMA) and allyl acetate (AAc) was investigated. The mole fraction of AAc plays an important role in the copolymerization of these two monomers. Molecular weight (MW) and molecular weight distribution (MWD) are completely altered when the feed composition is dominantly AAc. NMR spectroscopy confirmed the incorporation of AAc into the polymer. However, no allyl-allyl linkages were observed at low conversions. T-g was found to be affected by the incorporation of AAc into the polymer. (C) 2001 Society of Chemical Industry.

Copolymerization of methyl methacrylate and allyl acetate Part I. Rate of reaction

Free radical bulk copolymerization of methyl methacrylate (MMA) and allyl acetate (AAc) has been investigated using electron spin resonance (ESR) and FT-near infrared (FTNIR) spectroscopy. Data are used to evaluate the rate constants. The mole fraction of AAc plays an important role in the copolymerization of these two monomers. AAc not only delays the Trommsdorff effect but also increases the onset of percentage total conversion at which the Trommsdorff region begins. With AAc fraction 0.5 and higher, no Trommsdorff effect was observed. Inclusion of AAc into copolymer structure mainly occurs in the Trommsdorf region or when the AAc fraction in the comonomer feed is dominant. This is associated with a drop in the concentration of propagating radicals. However, ESR spectra indicate that the MMA propagating radical is predominant during the reaction. In the comonomer mixtures where a Trommsdorff region can be observed, the addition of AAc does not produce any significant change in k(p) and k(t) in the steady state region. Major changes in k(p) and k(t) are observed after the gel point and glassy state, respectively. (C) 2001 Society of Chemical Industry.

The use of F-19 NMR for new structure determination in the radiolysis of FEP

The radiation chemistry of poly(tetrafluoroethylene-co-perfluoropropylene), FEP, with a mole fraction of tetrafluoroethylene, TFE, of 0.90 has been studied under vacuum using Co-60 gamma -radiation over absorbed dose ranges up to 3.0 MGy. The radiolysis temperatures were 300, 363, 423 and 523 K. New structure formation in the copolymers was analyzed by solid-state F-19 NMR. The new structures formed in the copolymers have been identified and the G-values for the formation of new -CF3 groups was 2.2 at the lower temperatures and increased to 2.9 at 523 K. The G-value for the loss of original -CF3 groups was approximate to1.0 at all temperatures. At the lower temperatures there was a net loss of -CF-groups on irradiation, G(CF) of -1.3, -0.9 and -0.5 at 300, 363 and 423 K, respectively, but at 523 K there was a net gain with G(CF) equal to 0.8. (C) 2001 Elsevier Science B.V. All rights reserved.

Solid state F-19 NMR determination of new structure formation in FEP following radiolysis at 300 and 363 K

The radiation chemistry of FEP copolymer with a mole fraction TFE of 0.90 has been studied using Co-60 gamma -radiation at temperatures of 300 and 363 K. New structure formation in the copolymers was analysed by solid state F-19 NMR. New chain scission products were the principal new structures found. The G-value for the formation of new -CF3 groups was 2.2 and 2.1 for the radiolysis of FEP at 300 and 363 K, respectively, and the G-value for the loss of original -CF3 groups was G(-CF3) = 1.0 and 0.9 at these two temperatures, respectively. There was a nett loss of -CF- groups on irradiation, with G(-CF) of 1.3 and 0.9 at 300 and 363 K, respectively. (C) 2001 Elsevier Science Ltd. All rights reserved.

The use of NMR for determination of new structures in irradiated TFE/PMVE fluoropolymers

The radiation chemistry of two TFE/PMVE copolymers with TFE mole fractions of 0.66 and 0.81 has been studied under vacuum using Co-60 gamma -radiation over absorbed dose ranges up to 4.2 MGy. The radiolysis temperature was 313 K for both TFE/PMVE copolymers. New structure formation in the copolymers was identified by solid-state F-19 NMR and the G-values for new chain ends of 2.1 and 0.5 and for branching sites of 0.9 and 0.2 have been obtained for the TFE/PMVE with TFE mole fractions of 0.66 and 0.81, respectively. The relative yields of-O-CF3 and -CF2-CF3 chain ends were found to be proportional to the copolymer composition, but the yields of the -CF2-CF3 chain ends and -CF- branch points mere not linearly related ia the composition. rather they wets correlated with the radical yields measured at 77 K. (C) 2001 Elsevier Science Ltd. All rights reserved.

Structural effects of lipophilic methotrexate conjugates on model phospholipid biomembranes

Lipophilic conjugates of the antitumor drug methotrexate (MTX) with lipoamino acids (LAAs) have been previously described as a tool to enhance MTX passive entrance into cells, overcoming a form of transport resistance which makes tumour cells insensitive to the antimetabolite. A knowledge of the mechanisms of interaction of such lipophilic derivatives with cell membranes could be useful for planning further lipophilic MTX derivatives with an optimal antitumour activity. To this aim, a calorimetric study was undertaken using a biomembrane model made from synthetic 1,2-dipalmitoyl-glycero-3-phosphocholine (DPPC) multilamellar liposomes. The effects of MTX and conjugates on the phase transition of liposomes were investigated using differential scanning calorimetry. The interaction of pure MTX with the liposomes was limited to the outer part of the phospholipid bilayers, due to the polar nature of the drug. Conversely, its lipophilic conjugates showed a hydrophobic kind of interaction, perturbing the packing order of DPPC bilayers. In particular, a reduction of the enthalpy of transition from the gel to the liquid crystal phase of DPPC membranes was observed. Such an effect was related to the structure and mole fraction of the conjugates in the liposomes. The antitumour activity of MTX conjugates was evaluated against cultures of a CCRF-CEM human leukemic T-cell line and a related MTX resistant sub-line. The in vitro cell growth inhibitory activity was higher for bis(tetradecyl) conjugates than for both the other shorter- and longer-chain derivatives. The biological effectiveness of the various MTX derivatives correlated very well with the thermotropic effects observed on the phase transition of DPPC biomembranes. (C), 2001 Elsevier Science B.V All rights reserved.

The role of melanocortin-1 receptor polymorphism in skin cancer risk phenotypes

We have examined melanocortin-1 receptor (MC1R) variant allele frequencies in the general population and in a collection of adolescent dizygotic and monozygotic twins to determine statistical associations of pigmentation phenotypes with increased skin cancer risk. This included hair and skin color, freckling, mole count and sun exposed skin reflectance. Nine variants were studied and designated as either strong R (OR = 63; 95% CI 32-140) or weak r (OR = 5; 95% CI 3-11) red hair alleles. Penetrance of each MC1R variant allele was consistent with an allelic model where effects were multiplicative for red hair but additive for skin reflectance. To assess the interaction of the brown eye color gene BEY2/OCA2 on the phenotypic effects of variant MC1R alleles we imputed OCA2 genotype in the twin collection. A modifying effect of OCA2 on MC1R variant alleles was seen on constitutive skin color, freckling and mole count. In order to study the individual effects of these variants on pigmentation phenotype we have established a series of human primary melanocyte strains genotyped for the MC1R receptor. These include strains which are MC1R wild-type consensus, variant heterozygotes, and homozygotes for strong R alleles Arg151Cys and Arg160Trp. Ultrastructural analysis demonstrated that only consensus strains contained stage III and IV melanosomes in their terminal dendrites whereas Arg151Cys and Arg160Trp homozygous strains contained only immature stage I and II melanosomes. Such genetic association studies combined with the functional analysis of MC1R variant alleles in melanocytic cells should provide a link in understanding the association between pigmentary phototypes and skin cancer risk.

Linkage and Association Analysis of Radiation Damage Repair Genes XRCC3 and XRCC5 with Nevus Density in Adolescent Twins

Previous studies have shown that a deficiency in DNA damage repair is associated with increased cancer risk, and exposure to UV radiation is a major risk factor for the development of malignant melanoma. High density of common nevi (moles) is a major risk factor for cutaneous melanoma. A nevus may result from a mutation in a single UV-exposed melanocyte which failed to repair DNA damage in one or more critical genes. XRCC3 and XRCC5 may have an effect on nevus count through their function as components of DNA repair processes that may be involved directly or indirectly in the repair of DNA damage due to UV radiation. This study aims to test the hypothesis that the frequency of flat or raised moles is associated with polymorphism at or near these DNA repair genes, and that certain alleles are associated with less efficient DNA repair, and greater nevus density. Twins were recruited from schools in south eastern Queensland and were examined close to their 12th birthday. Nurses examined each individual and counted all moles on the entire body surface. A 10cM genome scan of 274 families (642 individuals) was performed and microsatellite polymorphisms in XRCC3 and adjacent to XRCC5 were also typed. Linkage and association of nevus count to these loci were tested simultaneously using a structural-equation modeling approach implemented in MX. There is weak evidence for linkage of XRCC5 to a QTL influencing raised mole count, and also weak association. There is also weak evidence for association between flat mole count and XRCC3. No tests were significant after correction for testing multiple alleles, nor were any of the tests for total association significant. If variation in XRCC3 or XRCC5 influences UV sensitivity, and indirectly affects nevus density, then the effects are small.

Clinical aspects of gestational trophoblastic disease: A review based partly on 25-year experience of a statewide registry

Background: Gestational trophoblastic disease is a fascinating group of pregnancy disorders characterised by abnormal proliferation of trophoblast, ranging from benign to malignant. Because the disease is uncommon, there is a need to formulate management with the assistance of collective information. Methodology: A review of available information from English written literature was undertaken especially data reported by registries around the world (Charing Cross Hospital in England, the North-western University and the New England area in the USA as well as our own experience in Queensland, Australia). Where possible, collated data from relevant studies were analysed to answer some of the questions posed in clinical practice, with reference to metastatic disease to liver and brain, twinning of molar gestation and coexisting fetus, and placental-site tumour. Results: We found that molar gestation can be classified according to its clinical presentation which influences the time taken to reach human chorionic gonadotropin (HCG) 'negativity' and the risk of persisting disease. Categorisation of risk is the basis for choice of chemotherapy to achieve good outcomes. Metastases to liver and brain remain problems in management; the development of 'new' metastases during chemotherapy is a very poor prognostic factor. In the variant of twinning with molar gestation and coexisting fetus, it is important to elucidate the fetal karyotype in planning management: a 69XXX fetus is not salvageable but a normal 46XX or 46XY fetus faces the prospect of early preterm delivery. The placental-site tumour is very rare; localised disease is curable by surgery; chemotherapy is less effective in disseminated disease. From collated worldwide data, the recurrence rate after one mole is 1.3% and after two or more is 20%. Reproductive outcome in subsequent pregnancies, even after multidrug chemotherapy, is not different from the general population. Because of the increased risk long-term of second tumours after multidrug chemotherapy a closer surveillance of these patients is necessary Conclusion: In general, the disease in its persisting or malignant form is 'a cancer model par excellence' because of an identifiable precursor condition, a reliable HCG marker, and sensitivity of the disease to cytotoxic drugs. With current management, retention of fertility is possible and normal reproductive outcome assured.

Analysis of multicomponent adsorption kinetics on activated carbon

An integrated mathematical model for the kinetics of multicomponent adsorption on microporous carbon was developed. Transport in this bidisperse solid is represented by balance equations in the macropore and micropore phases, in which gas-phase diffusion dominates the mass transfer in the macropores, with the phenomenological diffusivities represented by the generalized Maxwell-Stefan (GMS) formulation. Viscous flow also contributes to the macropore fluxes and is included in the MS expressions. Diffusion of the adsorbed phase controls the mass transfer in the micro ore phase, p which is also described in a similar way by the MS method. The adsorption isotherms are represented by a new heterogeneous modified vacancy solution theory formulation of adsorption, which has proved to be a robust method for adsorption on activated carbons. The model is applied to the coadsorption and codesorption of C2H6 and C3H8 on Ajax and Norit carbon, as well as the displacement on Ajax carbon. The effect of the viscous flow in the macropore phase is not significant for the cases studied. The model accurately predicts the overshoot behavior and rollup of C2H6 during coadsorption. The prediction for the heavier compound C3H8 is always satisfactory, though at higher C3H8 mole fraction, the overshoot extent of C2H6 is overpredicted, possibly due to neglect of heat effects.

Resistência natural da madeira de sete espécies de eucalipto ao apodrecimento

A resistência natural ao apodrecimento se constitui numa importante propriedade da madeira. Em se tratando das madeiras provenientes do gênero Eucalyptus, tal atributo se torna ainda mais importante, uma vez que tais madeiras são, na grande maioria das vezes, de difícil tratabilidade pelos métodos de tratamento convencionais. O objetivo do presente trabalho foi determinar a resistência natural da madeira de sete espécies de eucalipto em ensaio acelerado de laboratório ao fungo causador da podridão-parda Gloeophyllum trabeum. Foram ensaiadas madeiras das espécies de Corymbia citriodora, Eucalyptus tereticornis, E. paniculata, E. pilularis, E. cloeziana, E. urophylla e E. grandis com 16 anos de idade, que cresceram na Estação Experimental de Anhembi, em São Paulo, pertencente ao Departamento de Ciências Florestais da ESALQ/USP. No que diz respeito ao apodrecimento causado pelo fungo Gloeophyllum trabeum, a madeira de eucalipto das sete espécies pode ser considerada resistente, uma vez que os valores de perda de massa foram sempre inferiores a 10%.

Influência dos estrativos na resistência ao apodrecimento de seis espécies de madeira

O presente trabalho teve como objetivo avaliar o efeito da extração da madeira de seis espécies, quatro nativas (candeia, cedro, cerejeira e jacarandá-caviúna) e duas exóticas (E. citriodora e E. gumifera), em diferentes solventes, na resistência ao apodrecimento causado pelo fungo da podridão-parda Gloeophyllum trabeum. O material foi ensaiado na forma de serragem, em face da maior facilidade para os procedimentos de extração. Dentre os resultados, pode-se destacar a baixa perda de massa ocorrida na madeira de cedro (Cedrela fissilis), evidenciando sua elevada resistência natural ao fungo testado e, ainda, à incapacidade dos solventes utilizados na retirada de compostos que conferem resistência ao apodrecimento. As madeiras de candeia (Vanillosmopsis erythropappa), cerejeira (Amburana cearensis), jacarandá-caviúna (Machaerium scleroxylon) e de eucaliptos (Corymbia citriodora e Eucalyptus gummifera) também apresentaram elevada resistência natural, em função da baixa perda de massa ocorrida, quando expostas ao fungo G. trabeum. Essas madeiras, quando totalmente extraídas, apresentaram elevados valores de perda de massa. No que diz respeito ao material extraído por diferentes solventes de forma isolada, observou-se, na candeia, que o solvente mais eficiente na retirada de substâncias que conferem resistência ao apodrecimento foi o diclorometano. Com relação ao cedro, o mais eficiente foi o metanol. Na cerejeira, por meio da mistura de etanol/tolueno retiraram-se mais substâncias, ao passo que no jacarandá-caviúna foi o metanol. Nas madeiras de eucaliptos, o metanol foi mais eficiente na retirada de componentes tóxicos ao fungo utilizado neste estudo, devendo destacar ainda, no E. gummifera, a eficiência da água quente na retirada de tais compostos. No C. citriodora, os valores de perda de massa, em razão das extrações em água fria, em água quente, em diclorometano e ao natural (não-extraída), foram muito baixos.

Revestimentos comestíveis na conservação pós-colheita de morangos cultivar Camarosa produzidos em sistema orgânico e convencional

As perdas pós-colheita de frutas promovem a elevação do custo dos produtos e diminuem a oferta ao consumidor. Suas principais causas estão na colheita, transporte e armazenamento inadequados. A aplicação de revestimentos comestíveis juntamente com a redução da temperatura de armazenamento constitui um dos métodos empregados para a conservação pós-colheita de produtos com vida útil curta, como frutas e hortaliças. O morango é um fruto consumido preferencialmente in natura. Desta forma, torna-se promissora a utilização de revestimento comestível para aumentar seu período de armazenamento e comercialização, sem alteração do sabor, da cor e do aroma dos frutos. A produção orgânica frente a convencional de frutos podem apresentar diferenças, sendo interessante o estudo envolvendo as formas de cultivo. Este estudo teve como objetivo avaliar a conservação pós-colheita de morangos cv. Camarosa, oriundos de cultivo orgânico e convencional revestidos com coberturas comestíveis. Os morangos foram revestidos com fécula de mandioca, gelatina e cera de carnaúba, armazenados durante 10 dias a 10 ºC. A cada 2 dias de armazenamento foram determinados perda de massa, sólidos solúveis, pH, acidez titulável, firmeza, antocianinas totais e podridão fúngica. Análise sensorial foi realizada para verificar a aceitação dos morangos e para avaliar a influência da informação nesta aceitação. A perda de massa foi maior no cultivo orgânico a partir do 8º dia de armazenamento, chegando a 11,47% contra 8,88% do cultivo convencional no final do 10º dia de armazenamento. O revestimento que possibilitou menor perda de massa foi o de cera de carnaúba em relação ao controle. A contaminação fúngica iniciou-se no 4º dia de armazenamento em ambos os tipos de cultivo. No 8º dia de armazenamento observou-se diferenças na podridão entre os tipos de cultivo, sendo o orgânico visualmente mais contaminado. O revestimento de cera de carnaúba apresentou menor podridão fúngica em relação aos outros revestimentos, porém não diferiu da amostra controle. Das variáveis físico-químicas avaliadas, apenas o teor de sólidos solúveis apresentou diferenças entre os tipos de cultivo, sendo o morango convencional o que obteve maiores valores. O teor de antocianinas dos morangos revestidos com fécula de mandioca diferiu do controle, porém o revestimento com fécula não diferiu dos revestidos com gelatina e cera de carnaúba. Foram verificadas diferenças na firmeza dos frutos em relação aos revestimentos. Ao longo do tempo foi observado diferenças no pH, teor de antocianinas e firmeza. O revestimento com cera de carnaúba se mostrou mais adequado em relação aos demais revestimentos, porém sua aparência mostrou-se com pouco brilho e esbranquiçado. Os frutos avaliados apresentaram vida útil pós-colheita de aproximadamente 6 dias. Os morangos, do ponto de vista microbiológico, se mostraram aptos para consumo. A aceitação dos morangos foi boa, não tendo ix diferenças significativas entre morango orgânico e convencional. O fornecimento da informação de “morango orgânico” e a apresentação de um texto adicional informativo não influenciaram na aceitação dos morangos. Entre os revestimentos testados o de cera de carnaúba se mostrou mais aplicável, os demais nas condições testadas não mostraram bons resultados.