On the effect of electrical field on Indian carps in captivity

Threshold current densities required for narcosis of fish in captivity differed in different species. Increased temperature of the water had greater effect on the fishes while changes of pH had no appreciable effect on narcosis in the fishes. Impulse currents of 50 V were found to have better effect on the fishes than continuous current of 180-220 V.

Effect of brood source on the growth of rohu (Labeo rohita Ham.) fingerlings reared in glass tanks with formulated diets

A 60 day long feeding trial was conducted in an indoor static water system with rohu fingerlings (Labeo rohita Ham.) originating from wild brood, private and public hatcheries (denoted as A B and C respectively). They were fed on formulated diet having 34% crude protein level using indigenous ingredients. The effect of brood source on growth as well as their responses to formulated diet was observed. On the basis of the observed growth rate, food conversion ratio, protein efficiency ratio, apparent net protein utilization and apparent protein digestibility, fingerling source A showed significantly (p<0.05) higher growth, while the sources B and C produced no significantly different (p>0.05) in terms of these parameters. The results of the present study demonstrated that the fingerlings of wild source were of best quality in terms of growth and food utilization in comparison to those had the sources from hatcheries.

Effect of supplementary feed on the growth of shinghi (Heteropneustes fossilis Bloch)

Effect of two supplementary feed (food A and food B) on the growth of shinghi, Heteropneustes fossilis was observed for 3 months period during winter and summer. Food B containing rice bran 2 g, wheat bran 2 g and blood 10 ml, showed better growth. The net gain in length was 70.04 mm and in weight was 13.82 g. Total net production was observed as 254.00 g/m² with feed A and 345.50 g/m² with feed B.

Effect of stocking density on the growth of Thai pangas, Pangasius sutchi (Fowler) in net cage fed on formulated diet

A three month long experiment was conducted to observe the effect of stocking density on the growth of Pangasius sutchi in net cages. The size of each cage was 1m³.The three stocking densities used were 40, 50 and 60 fishes/m³ and designated as treatment T1, T2 and T3 respectively. Each treatment had three replicates. All the fishes were of same age group having mean length and weight of 7.13 ± 1.37 cm and 2.46 ± 0.12 g respectively. The fish in all the net cages were fed a diet containing 34% protein. The result of the study showed that fish in the treatment T1 stocked at the rate of 40 fish/m³ resulted the best individual weight gain followed by T2 and T3 respectively. The specific growth rate (SGR) ranged between 3.51 and 3.09, the food conversion ratio (FCR) values ranged between 1.73 and 2.04 with treatment T1 resulting the lowest FCR. The protein efficiency ratios (PER) values were 1.69, 1.16 and 1.43 for treatment T1, T2 and T3 respectively. There was no significant (P>0.05) variation among the survival rates of fish which ranged between 92 and 95%. The net productions in different treatments were 2189, 2343, and 2283g for treatment T1, T2 and T3 respectively. The result of the present study indicated that the best individual growth of P. sutchi was obtained at a density of 40 fish/m³ but the highest total production was obtained at a stocking density of 50 fish/m³ in net cages.

Preliminary observations on the effect of electrical seine on fish catch

Forty-six experiments were done with the electric seine in 24 tanks with a.c. and interrupted a.c. The source of electrical energy was a 3 Kw a.c. generator of water-cooled diesel engine. A control seining without applying electricity was conducted for every experiment with electric "seine" to have a comparison for the efficiency of electric "seine" over control ones. Electric seine was found to have an increased catch over control seining both in numbers and in weight. Electric seine with two electrodes was found to have better effect over three electrodes. Benthic fishes like Cirrhina mrigala, Notopterus notopterus, Cyprinus carpio, Glassogobius giuris, Ophicephalus sp. and Mystus sp. were found to be more sensitive in electric "seine". Increased catch of small fishes like C. mrigala, N, notopterus and Ophicephalus sp. has been observed in electrical "seine" in addition to larger ones.

Studies on the effect of compounded feeds on the growth of juvenile Banana prawn Penaeus merguiensis

Laboratory experiments were conducted to determine the effect of compounded feeds on growth of juveniles (3 to 4 cm) of the Banana prawn Penaeus merguiensis. In all, seven diets were prepared with different combinations of locally available ingredients. Diascure, a local tuber was used as source of carbohydrate and vitamin mineral mixture (1%) was used in all the diets. The results indicated that diets with groundnut cake (diet 2, 3, 5 and 7) produced better survival and growth. In diets 4 and 6 growth was good but survival was very poor. Amongst all the diets, diet 7 produced significantly better growth, survival and food conversion ratio.

Effect of deposition conditions on the chemical bonding in sputtered carbon nitride films

A balanced planar r.f. powered magnetron sputter source has been used to deposit carbon nitride films from a graphite target under various conditions. Sample temperature, bias voltage and nitrogen content in the gas mixture were varied. The effects of oxygen, methane and ammonia on the film growth were also studied. Special attention was paid to the effects of the deposition parameters on the structure of the films, in particular the hybridisation of the carbon and nitrogen bonding. The chemical bonding of the carbon and nitrogen atoms was studied by electron energy loss spectroscopy (EELS). The chemical composition was evaluated by Rutherford back-scattering. The intensity of transitions to π antibonding orbitals, as revealed by EELS, was found to increase with the nitrogen content in the films. Ion bombardment of the films during growth and the addition of oxygen or hydrogen-rich gases further increased the proportion of π bonds of both the carbon and nitrogen atoms. It is suggested that the increase in the transitions to μ antibond orbitals is to be explained by increased sp2 or possibly sp hybridisation of the carbon and nitrogen. Also, the effect of annealing on the bonding of nitrogen rich films after deposition was tested. The changes caused by nitrogen and deposition conditions are consistent with previous reports on the formation of paracyanogen structures.

Effect of microwave pasteurisation on the quality of fish chikuwa

Temperature profile of fish chikuwa was taken during microwave cooking at 100 power level for different durations and subjected to organoleptic evaluation. Moisture content and organoleptic quality of fish chikuwa paste mixed with different levels of moisture and cooked at 100 power levels for 6 minutes were analysed. Microwave cooked fish chikuwa with standardized recipe was heated in microwave oven with hot air at different temperature for different durations. Fish chikuwa microwave cooked at 100 power level for 6 minutes had higher scores for all attributes as compared to those cooked for different durations and also fulfill the condition of pasteurisation of fish chikuwa. Fish chikuwa prepared with 35% moisture had better scores for all attributes unlike those of other levels. Heating of microwave pasteurised fish chikuwa at different temperatures for different durations could not achieve the desired brown colour.

The effect of feeding rate on the growth, food conversion and protein efficiency of silver dollar, Metynnis schreitmulleri (AHL), fry

A 30-day experiment was conducted to determine the effects of varying feeding rates on the growth of fry of silver dollar, Metynnis schreitmulleri (Ahl). Silver dollar fry with an average initial body weight of 1.100 ± 0.029 g were collected from a local fish breeder and fed a diet (35% protein and 6% fat) at the rate of 3, 6 and 9% of body weight per day in two equal meals. Per cent weight gain increased from 54.54 to 118.18 with increased feeding rates, which were significantly different (p<0.05) from each other. The highest specific growth rate was obtained in the fry fed at 9% body weight per day. In another study for 30 days, the effects of feeding frequency on growth, feed conversion and protein efficiency of silver dollar fry were evaluated. Groups of silver dollar fry with an initial individual weight of 0.700 ± 0.019 g were offered feed continuously for 24 hours during the day or night at different time intervals with varying meal sizes. The night time feeding with two meals gave the lowest weight and length gains (0.985 g and 0.30 cm). The growth rates of fish fed during day with three equal-sized meals are significantly (p<0.05) higher (4.66%) than the other treatments.

Wadge Bank trawl fishery studies. Pt. 1. The effect of the 1928 to 1935 commercial trawling on the demersal stock

The demersal fish stock of Wadge Bank is one of the important fish resources for both Sri Lanka and India. Sivalingam and Medcof (1957) have given an account of its history, general features and relative productivity. According to records the total fishing effort on the bank had been fluctuating and very recently the number of boats operating on the bank has suddenly increased, and there is a possibility that still more will begin operating on the bank in the near future (Mendis, 1965). The increased fishing effort with the possibility of still further increase calls for proper management practices by those concerned, in order to obtain the maximum sustained yield from the demersal stock. For this purpose a detailed study of the past performance of the fishery is essential. With this in view all records of commercial operations up to 1960 are being analysed by the present author and are to be published in a series. This is the first paper in the series and gives a detailed analysis of the first commercial trawling operations from 1928 to 1935. Since there had been a major break of about 10 years between this and the present fishery this data is being analysed separately.

The effect of surface hardening on the elastic shakedown of elliptical contacts

The effect of varying both the aspect ratio and the coefficient of friction of contacts with elliptical geometry on their elastic shakedown performance has been examined theoretically for surfaces with two types of subsurface hardness or strength profiles. In stepwise hardening the hard layer is of uniform strength while in linear hardening its strength reduces from a maximum at the surface to that of the core at the base of the hardened layer. The shakedown load is expressed as the ratio of the maximum Hertzian pressure to the strength of the core material. As the depth of hardening, expressed as a multiple of the elliptical semi-axis, is increased so the potential shakedown load increases from a level that is appropriate to a uniform half-space of unhardened material to a value reflecting the hardness of the surface and near-surface material. In a step-hardened material, the shakedown limit for a surface 'pummelled' by the passage of a sequence of such loads reaches a cut-off or plateau value, which cannot be exceeded by further increases in hardening depth irrespective of the value of the friction coefficient. For a linear-hardened material the corresponding plateau is approached asymptotically. The work confirms earlier results on the upper bounds on shakedown of both point and line contacts and provides numerical values of shakedown loads for intermediate geometries. In general, the case depth required to achieve a given shakedown limit reduces in moving from a transversely moving nominal line load to an axisymmetric point load.

The effect of wake passing on a flow separation in a low pressure turbine cascade

This paper describes an investigation into the effect that passing wakes have on a separation bubble that exists on the pressure surface and near the leading edge of a low pressure turbine blade. Previous experimental studies have shown that the behaviour of this separation is strongly incidence dependent and that it responds to its disturbance environment. The results presented in this paper examine the effect of wake passing in greater detail. Two dimensional, Reynolds averaged, numerical predictions are first used to examine qualitatively the unsteady interaction between the wakes and the separation bubble. The separation is predicted to consist of spanwise vortices whose development is in phase with the wake passing. However, comparison with experiments shows that the numerical predictions exaggerate the coherence of these vortices and also overpredict the time-averaged length of the separation. Nonetheless, experiments strongly suggest that the predicted phase locking of the vortices in the separation onto the wake passing is physical.

The effect of work processes on the casing heat transfer of a transonic turbine

This paper considers the effect of the rotor tip on the casing heat load of a transonic axial flow turbine. The aim of the research is to understand the dominant causes of casing heat-transfer. Experimental measurements were conducted at engine-representative Mach number, Reynolds number and stage inlet to casing wall temperature ratio. Time-resolved heat-transfer coefficient and gas recovery temperature on the casing were measured using an array of heat-transfer gauges. Time-resolved static pressure on the casing wall was measured using Kulite pressure transducers. Time-resolved numerical simulations were undertaken to aid understanding of the mechanism responsible for casing heat load. The results show that between 35% and 60% axial chord the rotor tip-leakage flow is responsible for more than 50% of casing heat transfer. The effects of both gas recovery temperature and heat transfer coefficient were investigated separately and it is shown that an increased stagnation temperature in the rotor tip gap dominates casing heat-transfer. In the tip gap the stagnation temperature is shown to rise above that found at stage inlet (combustor exit) by as much as 35% of stage total temperature drop. The rise in stagnation temperature is caused by an isentropic work input to the tip-leakage fluid by the rotor. The size of this mechanism is investigated by computationally tracking fluid path-lines through the rotor tip gap to understand the unsteady work processes that occur. Copyright © 2005 by ASME.